Oracle Application Server 10g Release 2 (10.1.2.0.2)  on 64bit RHEL

HI,
EBS-12.1.3
DB 11gR1
I am Facing following Error: while installing Oracle Application Server 10g Release 2 (10.1.2.0.2) on 64bit RHEL
pwd
pwd
/shared/bishiphome/Disk1/install/linux64
[oravis@erptest linux64]$./runInstaller -ignoreSysPreReqs
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-07-20_08-52-57AM. Please wait ...The Java RunTime Environment was not found at /tmp/OraInstall2011-07-20_08-52-57AM/jdk/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
Should i install JRE in the Server
Thanks
Vishwa
Edited by: Vi**** on Jul 19, 2011 10:18 PM
Edited by: Vishwa on Jul 25, 2011 3:30 AM

HI,
Change the above to the following and see if you get any error:
$ /shared/bishiphome/Disk1/install/linux64/runInstaller ignoreSysPrereqs -jreLoc /usr/shared/bishiphome/Disk1/install/linux64/runInstaller ignoreSysPrereqs -jreLoc /usr
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-07-26_08-46-15AM. Please wait ...[oravis@erptest ~]$ Exception in thread "main" java.lang.ClassFormatError: oracle.as.install.engine.modules.install.exception.InvalidInventoryPointerException (unrecognized class file version)
at java.lang.VMClassLoader.defineClass(libgcj.so.7rh)
at java.lang.ClassLoader.defineClass(libgcj.so.7rh)
at java.security.SecureClassLoader.defineClass(libgcj.so.7rh)
at java.net.URLClassLoader.findClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:488)

Similar Messages

  • How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)

    Hi All,
    Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
    I have all the required documents like
    1. Oracle Application Server Portal Server Configuration Guide.
    2. Oracle Application Server Web Cache Configuration Guide.
    3. Oracle Application Server SSO Administration Guide.
    I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.

    The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
    Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
    SSL to OracleAS Single Sign-On
    SSL to OracleAS Web Cache
    SSL Throughout OracleAS Portal
    External SSL with Non-SSL Within Oracle Application Server
    For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
    Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
    Regards,
    Pete

  • Oracle Application Server 10g Release 1 and JDeveloper 10.1.3.2.0

    Hi,
    One my client have Oracle Application Server 10g Release 1.
    Can I do development in JDeveloper 10.1.3.2.0 using ADF and then deploy it on OAS 10g R1.
    If can what I should look for so that it can be as smooth as possible.
    Regards,
    Raj
    www.oraclebrains.com

    hi
    Maybe this can help
    "Application Servers Supported by JDeveloper"
    http://www.oracle.com/technology/products/jdev/collateral/papers/10g/as_supportmatrix.html
    success
    Jan Vervecken

  • 10.1.0.5 Patch for Oracle Application Server 10g Release 1

    Hi Guys,
    Does anyone know what is the patch number for 10.1.0.5 Patch for Oracle Application Server 10g Release 1?
    This is a Oracle Application Server and not Oracle Database server.
    I tried searching on Metalink but not able to find it.
    Thanks in advance!
    Avinash.

    10.1.0.5 is not a version number for an OAS. It is only a version number for RDBMS.
    If you are running OAS 10.1.2.x with the Identity Managmenet/SSO (OID Server), & elected to have it install the Metadata Repository database for you, this was a RDBMS release below 10.1.0.5. The OAS patch to 10.1.2.2 or 10.1.2.3 required the RDMBS be updated to 10.1.0.5 first. This is the standard 10.1.0.5 update for your platform.
    use Advanced Search on Metalink
    To find the OAS 10.1.2.2 or 10.1.2.3 patch set, search for Oracle Fusion Middleware Server. Release 10.1.2.2 and 10.1.2.3. Look for the decriptions like "PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE" OR "PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2"
    To find the RDBMS 10.1.0.5 patch, search for RDBMS Server, Release 10.1.0.5. Look for the Description containing something like "10.1.0.5 PATCH SET FOR ORACLE DATABASE SERVER"
    The patch number is different per platform, so I can't tell you the exact #s without more info (OS)

  • Oracle Application Server 10g Release 3 (10.1.3) to 10.1.3.5.0

    Hello,
    I'm trying upgrade Oracle Application Server 10g Release 3 (10.1.3) to 10.1.3.5.0. Let me give a background first:
    I tried to install Oracle AS 10.1.3 but it ran into error because windows firewall was blocking javaw.exe opmn.exe. I had cancelled the installation. So ORACLE_AS1 failed initiatlly. After i identified the issue i installed ORACLE_AS2. This went through successfully without issues. I'm able to login to BPEL Console. But only after executing opmnctl startall in DOS Prompt. I have installed Windows 7.
    Now when I try to upgrade to 10.1.3.5.0 the installer automatically selects destination location ORACLEAS1. I change it ORACLEAS2 where (10.1.3) is installed. After clicking on a next i get and issue as shown in the below link:
    [http://www.mypicx.com/09172010/issue/]
    Can anyone please help me resolve this issue?

    Hi,
    When i am trying to install OAS 10g R3 on windows7. I am getting the error as:- Not supported OS press enter to exit the setup.
    Please help me is there any other way to install.
    Thanks in advance.

  • Oracle Application Server 10g Release 2

    Hello,
    We are in the process of upgrading our test and live application servers to use the release2 software.
    All is working fine on the test server (windows 2000 platform) but when we try using the alias match on the live server (Windows XP) to pick up the icons for some reason it cannot see the location on the network where the images are stored.
    Has anyone had any similar trouble? Is there a known issue with virtual paths on Windows XP?
    Also, for some reason when using Enterprise Manager to stop the reports service it is not working, it goes through the process but the service remains UP.
    Any help is greatly appreciated.
    Many thanks
    Rhys

    Hi,
    Reports runs in the OC4J_BI_Forms instance. You have to stop it to stop Reports. Unfortunately, you will also stop Forms. Not sure why Oracle included Start/Stop/Restart buttons for Reports - my experience has been they are useless. Note that Forms does not have these buttons.
    Sorry, don't have any experience with virtual paths.
    Jim

  • New Oracle Application Server 10g Release 2 (10.1.2) Deploy

    Hi,
    I downloaded the "NEW"" version and tried to deploy my war files. It take forever!??!? it worked fine on the previous version.
    Any Idea?!
    Thanks,
    EA

    Hi,
    1. All war files that I deploy are about ~50k
    2. No EJB only servlets and jsp
    3. Here is an example for deployment command that I uses: dcmctl deployApplication -f %APP_HOME%\alarm.war -a alarm-app -co %COMPONENT_NAME% -rc /alarm
    4. No, we're using IAS java edition (container and http server)
    Best,
    EA

  • Wicket and Oracle Application Server 10g Release 3

    I am trying to get the simple wicket application "wicketfun" described at
    http://nikojava.wordpress.com/2008/10/27/wicket-guide-for-jdeveloper-11g/
    working, but using jdev 10.1.3.4 and wicket 1.3.5.
    I deployed as an .ear file but when I try to run the application, I get
    “403 Forbidden Directory browsing not allowed”.
    I’m hoping it is something simple — does anyone have any ideas
    on how to find out what is wrong?
    Thanks

    Thanks for the quick reply Michel,
    I tried editing this file, but the deployment information must be being stored elsewhere because whenever the application is restarted, my changes get overwritten and the file is as before.
    I was able to enable directory browsing view the EM console (it is a checkbox on the "Configuration Properties" page), but this simply ends up showing a directory listing.
    What is supposed to happen, from the description of the example, is that MyApplication.getHomePage() should be invoked, which invokes the class Hello, resulting in the page hello.html being displayed.
    I have read that OAS does not handle filters properly -- do you know anything regarding this?

  • Oracle Application Server 10g R3 with patch set 10.1.3.5.0

    Hi All,
    Can anyone help me on this, When I install Oracle Application Server 10g Release 3 (10.1.3.1.0) and patch set 10.1.3.5.0 on Linux. I am not able to find forms and reports container.
    This version doesn't support forms and reports or I have go OAS 10g R2 (10.1.2.0.2) with patch set 3 (10.1.2.3.0). What is the difference between these two releases.
    Please help me.
    Regards,

    Hi James,
    1)Yes it supports IE 8 .Please review the below link for certification details on browers :-
        http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BAJGCBEA
         Note: Oracle Application Server supports only those browsers.
    2)Forms only support Windows 7 32 bit only.
        Please refer to the note:1292919.1 "Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)"
    3)Could you provide more information of JVM because when you install 10gR2 it has JDK and JRE present in it.
    Regards,
    Prakash.

  • Oracle Application Server 10g on Oracle VirtualBox

    Dear All,
    I recently almost completed learning OAS 10g, I know 10g is now a past. but it needs to learn various basics of 10g. like Infra, Web, Applications server, database server etc. All this I have learned on single machine with Quad 2 Core+8GB RAM+320 Hdd and 2.4Mhz processor.
    Now, I want to install all four products(above) sepretly on Oracle Virtual Box Virtual Machines(VM). Can any one have this experience and share with me step by step and what configuration (like RAM,space etc) is needed on one VMs for each product. Thanks.

    Hello! you can follow this link:
    ORACLE-BASE - Oracle Application Server 10g Release 3 (10.1.3) Installation On RedHat Advanced Server and CentOS

  • Install and configure report service on Oracle Application Server 10g

    i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
    Thanks

    the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
    our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
    so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
    what is the other choices that oracle supports that can help us in this case ???

  • Reports run in LAN but not in WAN from Oracle Application Server 10g R2

    Hi,
    I am using Microsoft(R) Windows(R) Server 2003, Standard Edition (Version 5.2.3790 Build 3790) & Oracle Application Server 10g Release 2 (10.1.2).
    I run my forms and reports in Oracle Application Server 10g Release 2 (10.1.2) successfully in client server environment. But when I run my application in WAN (our private network between different cities) then forms are run successfully but reports does not run.
    i am calling reports from Forms using following code.
    PROCEDURE PRINT_REP_WEB IS
    RO_Report_ID REPORT_OBJECT;
    Str_Report_Server_Job VARCHAR2(100);
    Str_Job_ID VARCHAR2(100);
    Str_URL VARCHAR2(100);
    PL_ID PARAMLIST ;
    BEGIN
    PL_ID := GET_PARAMETER_LIST('TEMPDATA');
    IF NOT ID_NULL(PL_ID) THEN
    DESTROY_PARAMETER_LIST(PL_ID);
    END IF;
    PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
    RO_Report_ID := FIND_REPORT_OBJECT('REPORT183');
    SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'C:\cheema\qdir_store\reports\pmms\backlog_jobtype.RDF');
    SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
    SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
    SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
    SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'PDF');
    SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_pap_10gasmid');
    Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
    Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_pap_10gasmid') + 2, LENGTH(Str_Report_Server_Job));
    Str_URL := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=rep_pap_10gasmid';
    WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
    DESTROY_PARAMETER_LIST(PL_ID);
    END;
    when clients in WAN press the reports button from Form there is a message "Page can not be displayed" appear.
    How can I run my reports in WAN, please suggest me solution.

    This sounds like a configuration issue. Are there different firewall rules that are enforced on WAN connections versus LAN connections?
    Hope this helps.
    Craig...

  • Oracle Application Server 10g Forms and Reports Services

    Hi there,
    I want to install Oracle Application Server 10g Forms and Reports Services. What must I download? The installation guide says that "Oracle Application Server 10g (9.0.4) Forms and Reports Services allows you to install and configure Forms and Reports Services without the need to install and configure all of Oracle Application Server 10g (9.0.4)" but it does not clearly state what exactly to download.
    Oracle Application Server 10g Release 2 (10.1.2.0.2)
    [http://www.oracle.com/technology/software/products/ias/htdocs/101202.html]
    or
    Oracle Developer Suite 10g (10.1.2.0.2)
    [http://www.oracle.com/technology/software/products/ids/htdocs/101202winsoft.html]
    Faoilean.

    You might find better assistance in the APplication Server forum - Oracle Application Server - General

  • How to convert HTTP to HTTPS in Oracle Application Server 10g(10.1.3)

    Can you please suggest notes to convert HTTP to HTTPS in Oracle Application Server 10g(10.1.3) as we need this to integrate the custom apps with EBS(12.1.3)?
    Appreciate your quick response,
    RM

    For Oracle EBS R12, the docs provided above should be helpful. If you want to configure the application server with SSL (assuming you have 10gAS installed), please refer to Oracle AS10g documentation -- Secure Sockets Layer (SSL)
    Oracle Application Server 10g Release 3 Documentation
    http://www.oracle.com/technetwork/middleware/ias/documentation/index.html
    Secure Sockets Layer (SSL)
    http://download.oracle.com/docs/cd/B25221_04/core.1013/b25209/part4.htm#BEHBDFGD
    Thanks,
    Hussein

  • Oracle Application Server 10g R2 + quad core

    sorry, but i don't speak english so much,
    my question is the next
    Oracle Application Server 10g R2 works in quad core processors??
    do you know some testimonials about this? some links?
    thanks
    I hope you can understend me. and can help me,

    Hi,
    Please see these links.
    Oracle Application Server 10g Release 2 (10.1.2.0.2)
    http://www.oracle.com/technetwork/middleware/ias/downloads/101202-095224.html
    Oracle e-Delivery website
    http://edelivery.oracle.com/
    Thanks,
    Hussein

Maybe you are looking for