Oracle Application server related issue

My application is developed using Oracle Developer suite 10g (10.1.2.0.2 ) and deployed in Oracle Application Server 10g R2 (10.1.2.0.2) in windows 2003 32 bit and its working fine.
My issue is as follows
1. Since Oracle Application Server 10g R2 (10.1.2.0.2) is not supported in windows 2008 64 bit, pls advise what version of Application Server 10g i should use. Please note that my
programs are developed using Oracle Developer suite 10g (10.1.2.0.2 ).
2. If i want to move to next development version (ie forms / Reports 11g) , which version of application server should i use.
Joe

The 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :)

Similar Messages

Oracle Application Server Install Issue

Gurus,
There were 2 CD/DVDS (media) sent for the Oracle Application Server Install, but the Oracle Universal Installer did not ask for the 2nd CD while doing the Install, is this normal or I am not sure I missed any steps while installing the 1st CD/DVD.
I was waiting that it would ask for the IInd CD/DVD, But it never? but the Install looked clean and exited clean without any error.
Please advice.
Thanks
Sheik

The 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :)

Oracle Applications Server Reports Issue

Dear All,
When running a report in application server 10g release2(10.1.2). It's showing a error message
"Terminated with error: <br>REP-56109: Job 119651 is terminated due to connection timeout."
Anyone can tell me a procedure to rectify this error. I am struck in development due to this not able to proceed further.
Version Used:
Reports 10.1.2.0.2
Data Base 11.1.0.7.0
Application server 10g release2(10.1.2)
Note: This error occurred only in application server.where in local report builder it is working fine.

Hi,
We have configured data base properly. This kind of problem we are facing in few reports.
apart that many other reports are working fine. however this reports are must to the customer for their MIS information.
Please advise us for a solution
Thanks & Regards
Dhamodaran

Oracle application server issue

Hi,
right now i m using oracle application server 10g on Hp-unix 11.11 (v1) , suddenly when the number of connection are increasing , memory usage reach to the 100% and my users got disconnected , previously it was the issue of number of connection and i increase the process parameter on the database side, my database is running on different node and application is on different node, the problem persist until i bouce the application server through opmnctl, any help will be appreciated.
thanks

These forums are for issues relating to EBS. Pl post in the OAS forum (Oracle Application Server - General for a better/faster response.
HTH
Srini

Oracle Application Server 10g thread stuck issue.

We are having,
Oracle Application Server 10g [10.1.3.1 + 10.1.3.4patch] along with Oracle Http Server 2.0
Now there is a issue of thread stuck [some application threads taking longer times] due to which the application server is unable to respond and sometimes it reinits the oc4j instance.
=> Is there any setting to increase the Thread Stuck Time in OAS.
=> Is there any setting to stop the auto reinit of oc4j instance.
=> Does the auto re init of oc4j get logged in opmn.log as well as in service.log.
It will be really helpful if any advice on the same.
Thanks in advance...
ManojC

Look in httpd.conf file anything that is like thread in there you will find a simple description of the Directives.
Greetings.

Oracle Application Server 10.1.3.1 installation issue

Hi,
I am trying to install Oracle Applicaiton server on linux and i have installed it on similar boxes before without any issues, however this time around after i am done with the installation, it is not showing me the enterprise console. It gives a successful installation message but with the following message.
Application Server Control Console is not running in this instance of Oracle Application Server. You can manage this instance remotely through another instance of Oracle Application Server that is configured to run Application Server Control Console.
What should I do to get the admin console. I also looking around and saw but emctl utitlity is not there in ORACLE_HOME/bin
Edited by: user9938780 on Dec 11, 2008 11:34 AM

the 10.1.3.1 version does not use emctl
if you do a opmnctl status -app you can see your applications, one of them is ascontrol
you can reach the emconsole through http://hostname:7777/em
to start you can issue opmnctl startproc application=ascontrol
reg
Michel
Edited by: MichelS on Dec 11, 2008 11:53 AM
Edited by: MichelS on Dec 11, 2008 11:54 AM

Language issue on Oracle Application Server Portal

Hello,
I have a application running on Oracle Application Server Portal. It is deployed on Win 2003 server(prod server). There is a language option to jump from english to arabic and arabic to english and the application is working on production server for both the languages but on some client machines the default page loaded is in english and on some client machine the default page loaded is in arabic. When we try to change the language from either of the languages it gives a message "Page cannot be displayed".
Please help me in solving this issue.
Thank you

Page cannot be displayed is one of the common problems, like fever. Please see application.log, apache error log to see any more specific reason for page cannot be displayed error. Look for any possible 'infection' which may have caused this 'fever', if you see what I am saying.
AMN

Workspace Issue Using Oracle Application Server

Dear All,
I've configured my Workspace using Oracle Application Server and now I can login to my workspace through this url http://<servername>:7777/workspace/.
But somehow, at my workspace home, I cannot find the folder or Explore inside, which is to see my Financial Reporting.
I'm login using admin and the privileged is already for administrator.
Is there anyone ever face this problem..??
Thanks.
Regards,
V13N

1. Correct the following path
extension_dir = "D:/php/ext"
(if your php is installed in D:/php, the above path is correct.
2. Find the line ;extension=php_oci8.dll
delete comment sign (;) and it will be :
extension=php_oci8.dll

Oracle Application Server Administration Related

Hi Experts,
I would like to learn Oracle Application Server Administration, since new to application can anyone please advice me which software to download from download section of oracle for practise purpose.
Thanks
Shaan

Hi Shaan,
I would like to learn Oracle Application Server AdministrationFirst, understand that it can be very complex as 10gAS is incredibly robust with loads of flexible features to learn. In some ways, it's got more complexity than the database.
You can download it here:
http://www.oracle.com/technology/software/products/ias/index.html
There are several good book to learn from:
http://www.amazon.com/s/ref=nb_ss_b/102-3269291-7776159?url=search-alias%3Dstripbooks&field-keywords=oracle+application+server
Here is the Oracle Press book: Oracle 10g Application Server Administration Handbook:
http://www.amazon.com/Oracle-Application-Administration-Handbook-Osborne/dp/0072229586
I co-wrote it, and I focus on how to use 10gAS in the real-world. . . .
Hope this helps. . .
Don Burleson
Oracle Press author

Oracle Application Server 10.1.3.3.0 OC4J Restarting

Oracle ADF application is deployed to the AS from JDeveolper 10.1.3.3.0 and runs fine initially but after continual use the OC4J returns a runtime exception and restarts.
1. This instance is not associated with an infrastructure but it is on a server with 10.1.2.2.0 Infra and middle tier instances.
2.The error occurs while using a web app. It all works fine at first, can nav pages, view records from the db just fine. Then after say 15mins the page returns Internal Server Error message at which time I check the Oracle app server ctrl to find the error below. That error is displayed in the actual app server ctrl page.
After a few minutes I can refresh the web app page and it returns to the home page working fine again until the next exception and restart. Sometimes as a result of this issue the server will not OC4J will not restart and the page will stop working altogether. At this point I cannot ever restart the OC4J. I have to Restart the entire server machine.
An error has occurred.
Caught exception calling invoke on oc4j:name=Singleton,type=OpmnConfig
Exception thrown in RequiredModelMBean while trying to invoke operation invoke
Object reference no longer valid (disconnected)
Object reference no longer valid (disconnected)
Hide Additional Trace Information
oracle.j2ee.admin.jmx.exception.config.ConfigMBeanException:
Caught exception calling invoke on oc4j:name=Singleton,type=OpmnConfig
at oracle.oc4j.admin.management.farm.util.OpmnProxyUtil.invoke(OpmnProxyUtil.java:204)
at oracle.oc4j.admin.management.farm.util.OpmnProxyUtil.invokeSingle(OpmnProxyUtil.java:129)
at oracle.oc4j.admin.management.farm.util.OpmnProxyUtil.invokeSingle(OpmnProxyUtil.java:99)
at oracle.oc4j.admin.management.farm.mbeans.OpmnConfigAgr.getNotificationServerAttrs(OpmnConfigAgr.java:200)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
at oracle.oc4j.admin.jmx.server.state.LocalizationFilterMBeanServer.invoke(LocalizationFilterMBeanServer.java:579)
at oracle.oc4j.admin.management.farm.util.OpmnProxyUtil.invoke(OpmnProxyUtil.java:202) ... 50 more
Caused by: java.io.IOException: Object reference no longer valid (disconnected)
at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.invoke(RemoteMBeanServer.java:820)
at oracle.oc4j.admin.management.farm.mbeans.JVMAgr.invoke(JVMAgr.java:1481)
at sun.reflect.GeneratedMethodAccessor40.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.reflect.misc.Trampoline.invoke(MethodUtil.java:36)
at sun.reflect.GeneratedMethodAccessor18.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585) at sun.reflect.misc.MethodUtil.invoke(MethodUtil.java:239)
at javax.management.modelmbean.RequiredModelMBean.invokeMethod(RequiredModelMBean.java:1071) ... 58
more Caused by: com.evermind.server.rmi.RMIConnectionException: Object reference no longer valid (disconnected)
at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:60)
at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:28)
at com.evermind.server.ejb.StatefulSessionRemoteInvocationHandler.invoke(StatefulSessionRemoteInvocationHandler.java:38)
at __Proxy8.invoke(Unknown Source) at oracle.oc4j.admin.jmx.client.MBeanServerEjbRemoteSynchronizer.invoke(MBeanServerEjbRemoteSynchronizer.java:144)
at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.invoke(RemoteMBeanServer.java:816) ... 68 more

Greetings,
First I would recommend turning up your logging level to FINEST to glean more informatin regarding the error that is occurring. Please post these data along with any related Messaging service configuration information. It is possible that two services are attempting to make the same connection and it is causing one or the other to fail. You might also review the information in your opmn config file. Does the 10.1.2.2 instance remain running during the OC4j restart?
OPMN Configuration:
10.1.20 How to Specify Ports for State Replication in OPMN
When you deploy an application utilizing state replication in a managed Oracle Application Server, OPMN dynamically allocates the ports that are used to propagate state across the cluster. You can restrict this allocation to a range of ports for an application that has peer-to-peer replication enabled. Specifying ports for state replication might be necessary in an installation with a firewall or network that uses a well-defined port range.
To specify a range of ports for peer-to-peer state replication
Add a <port> element to an OC4J instance configuration in the opmn.xml file.
Specify the name of an application that has peer-to-peer replication enabled as the value of the id attribute of the <port> element.
Specify a range of ports in the range attribute of the <port> element.
For example, for deployment of an application named rac-web that is set up for peer-to-peer replication, the line labeled <port id=rac-web .../> in the following OC4J instance configuration tells OPMN to use ports 15213 to 15214 for state replication:
<port id="default-web-site" range="80-100" protocol="http"/>
<port id="rmi" range="12401-12500"/>
<port id="rmis" range="12701-12800"/>
<port id="jms" range="12601-12700"/>
<port id="rac-web" range="15213-15214"/>
For more information about state replication, see Chapter 9, "Application Clustering in OC4J," in the Oracle Containers for J2EE Configuration and Administration Guide.Quoted from:
http://download.oracle.com/docs/cd/B32110_01/relnotes.1013/b32199/oc4j.htm#CEGICDEF-Michael

Deleting the Shared library in oc4j instance of Oracle Application Server

Hi Friends,
I am using Oracle Application Server (10.1.3.4.0). I have some system level shared libraries. When i am deploying the application in home instance the application is deploying fine, but when i create an another instance using the default group i am getting two more system level shared libraries that are not present in the home instance. Because of this two shared libraries i am not able to deploy the application.
Is there a way to delete the system level shared libraries. If so provide the related information. If there is any other alternative solution provide me that also. This is very urgent to me. Please help me in resolving this issue.
Thank You,
Ravi kumar.

Hi Shail,
i referred the link you have sent it was helpful to me, but the thing is while deleting the shared library apache.webservices it is saying the shared library is in use. When we brought down the Application Server and try to run the removeSharedLibrary command we got other error.
Error: "Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
Is the way which i have done is correct ?? Please reply me.
Thank You,
Ravi kumar.

EAS not running on Oracle Application Server, Oracle Enterprise Linux

Okay, another question. EAS is up and running on Oracle Application Server, but the URL is unresponsive.
In the eas log file, I see
Exception message (Oct 25, 2009 11:33:03 AM):
no environmentjni in java.library.path
java.lang.UnsatisfiedLinkError: no environmentjni in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:992)
at com.essbase.eas.server.AppManServlet.init(Unknown Source)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4942)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1144)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:431)
at com.evermind.server.Application.getHttpApplication(Application.java:586)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1906)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
at java.lang.Thread.run(Thread.java:595)
Warning message (Oct 25, 2009 11:33:03 AM):
java.library.path=/app/oracle/product/OracleBI/server/Bin:/app/oracle/product/OracleBI/web/bin
I assume that the problem is the java library path, which is pointing to directories related to my OBIEE installation, instead of a java environment somewhere in the hyperion install. If that's right, how do I change this?
Thanks!
Edited by: James@JHPWD on Oct 25, 2009 8:44 AM

Do you have a resolution for this issue? I am encountering the same issue on Solaris 10 SPARC using Essbase 64bit, OAS and Shared Services.
Thanks,

Unable to start Oracle Application Server processes

I am having the same problem that a number of people have
mentioned concerning ORA-20214 Unable to start OAS processes ...
The problem seems related to Windows NT 4.0 SP4. One developer
mentioned a specific Oracle Bug #768386 that had something to do
with the yt40.dll. Does anyone know how I can get this patch?
Has anyone gotten OAS to work on SP4 without this patch? Thanks
for any assistance you can provide.
null

Dear James, Anirudh,
Right now I have installed this two syned version.
Oracle Application Server SOA suite 10.1.3.1.0
JDev 10.1.3.1.0
Problem is, I have deployed complete Application server, But I am receiving the following errors.
*No OC4J process up for AS instance identified by domain:
opmn-orabpel+oc4j-anne-8888-default*
1. Actually i gave instance name as --> orabpel
username as --> oc4jadmin
password --> welcome1
But when I trying to connect server with mentioned instance name, I am not able to connect. Is there any specification to set instance name in SOA suite 10.1.3.1.0. Also please suggest how to start my Application server.
2. My doubt is while creating Application server connection from JDEV what we have to select
1. Standalone OC4J 10g 10.1.3
2. Oracle Application Server 10g 10.1.3
3. From the beginning itself my application server status was down. I cant able to understand the under laying issues.
Please suggest me..
Thanks,
Rajesh

How Standalone OC4J and the Oracle Application Server linked to each other

Hi ,
Please let me know what is the relation between a Standalone OC4J and the Oracle Application Server ?
In my application The Oracle Application Server is installed in C drive and there is a Stand alone oC4j .
Please tell me how they are linked to each other .
Thank you .

It depends on your need and what features and functionality of Oracle Application Server you are interested in. Note that OC4J is a component of Oracle Application Server that can run as a standalone component or within Oracle Application Server. Question #6 in earlier mentioned FAQ document states:
OC4J standalone is J2EE 1.3 compatible (1.4 and 1.5 too in later releases of OC4J) and is able to be used in both development and small scale production environments. OC4J standalone provides its own inbuilt HTTP/S listener to allow clients to execute Web applications that it has deployed. Application deployment and server configuration of OC4J standalone is performed by the manual editing of a simple set of XML files.
For large scale enterprise deployments, the Oracle Application Server product is likely to be more suitable with its comprehensive feature set including Oracle HTTP Server, process monitoring and management capabilities, and its configuration and management console.
So if you are happy with what you see in standalone OC4J and scalability isn't an issue for you, you can stay with standalone OC4J and don't need to move to Oracle Application Server.
PS: If you do decide to use OC4J that's embedded with Oracle Application Server, you can't move your standalone OC4J inside Oracle Application Server. You will have to reconfigure embedded OC4J again (as you might have done with standalone OC4J) and redeploy your applications.
Hope this helps.
Thanks
Shail

SSL test in Oracle Application Server 10.1.2

Hi ,
we are using one Oracle Application Server Web Cache 10.1.2 as our web server.This redirects users to the Application Server.(EBS 12.0.4)
Now we need to implement SSL to secure user credentials.So i am planing to implement SSL in our web cacahe server.Will this be enough to secure user credentials??I dont have any idea.Please help.
Moreover our web cache is not configured in SSL during the time of installation.Can any body suggest me a place from where i could get one demo Certificate to put it onto my web server and test the SSL confiration.EBS has provided one demo for application tier(inside $ORACLE_HOME/apache/certs/).
But we will have to implement in web cahe tier not in application tier.
We are using EBS 12.0.4 in Hp-Ux v11.23.

Hi susmit;
Please chekc below note which could be helpful for your issue:
SSL Primer on Using OpenSSL as a Certificate Authority with E-Business Suite (with a Windows Example) [ID 1175193.1]
Enabling SSL in Release 12 [ID 376700.1]
R12.0.6+ : Oracle Application Object Library SSL Test Transaction Data Test [ID 732282.1]
R12.0.[3-4] : Oracle Application Object Library SSL Test Transaction Data Test [ID 564066.1]
Regard
Helios

Oracle Application server related issue

Similar Messages

Maybe you are looking for