Oracle Apps 11i - Data Archival
Hi,
Has anyone done data archival on Oracle Apps? I would like to know if there are any best practices or any guidelines for the data archival.
Kindly share your experience on data archival on Oracle Apps.
Regards
Sridhar M
Hi;
Please see:
Oracle E-Business Suite Data Archival Strategy
http://documents.club-oracle.com/downloads.php?do=file&id=1862
Can We archive the EBS r12 tables data?
Also see:
http://it.dspmanagedservices.co.uk/blog-1/bid/60253/Managing-data-growth-on-E-Business-Suite-with-an-archiving-strategy
Check this pdf
Regard
Helios
Similar Messages
-
Sending PO data from Oracle APPS 11i to another Oracle APPS 11i
I am trying to send the XML message (Purchase Order Data) from the Oracle APPS 11i to the other Oracle APPS 11i using XML Gateway and the AQ Adaptors in both outbound and inbound. I have created the Receive Activity for Outbound AQ Adaptor and the Invoke Activity for the Inbound AQ Adaptor and the Assign Activity in the middle to assign the variables for both Receive and Invoke Acvities.
I have created a partner link using AQ adapter to Dequeuing the data from Oracle APPS 11i that generated by XML Gateway and also have created a partner link using AQ adapter to Enqueuing the data.
When I run, it gives me an error on the Enqueuing side with the followings:
[2006/04/04 10:03:57] New instance of BPEL process "XML2APPS" initiated (# "18").
<process>
<sequence>
AQ_Receive
[2006/04/04 10:03:57] Received "Receive_Dequeue_InputVariable" call from partner "PO_IN_QUEUE" More...
<Receive_Dequeue_InputVariable>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="ReceiveDocument">
<PROCESS_PO_007>
<CNTROLAREA>
<BSR>
<VERB value="PROCESS">PROCESS</VERB>
<NOUN value="PO">PO</NOUN>
<REVISION value="007">007</REVISION>
</BSR>
<SENDER>
<LOGICALID>ORACLE</LOGICALID>
<COMPONENT>PURCHASING</COMPONENT>
<TASK>POISSUE</TASK>
<REFERENCEID>VIS.US.ORACLE.COM:oracle.apps.po.event.xmlpo:32570-148852</REFERENCEID>
<CONFIRMATION>0</CONFIRMATION>
<LANGUAGE>US</LANGUAGE>
<CODEPAGE>UTF8</CODEPAGE>
<AUTHID>APPS</AUTHID>
</SENDER>
<DATETIME qualifier="CREATION" type="T" index="1">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>13</HOUR>
<MINUTE>02</MINUTE>
<SECOND>29</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
</CNTROLAREA>
<DATAAREA>
<PROCESS_PO>
<POORDERHDR>
<DATETIME qualifier="DOCUMENT" type="T" index="1">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>13</HOUR>
<MINUTE>00</MINUTE>
<SECOND>45</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<OPERAMT qualifier="EXTENDED" type="T">
<VALUE>267</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM />
</OPERAMT>
<POID>4484</POID>
<POTYPE>STANDARD</POTYPE>
<ACKREQUEST>N</ACKREQUEST>
<CONTRACTB />
<CONTRACTS />
<DESCRIPTN />
<PORELEASE />
<USERAREA>
<DATETIME qualifier="ACTSTART" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="ACTEND" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<FOB>
<DESCRIPTN>Vendor's responsibility ceases upon transfer to carrier</DESCRIPTN>
<TERMID>Origin</TERMID>
</FOB>
<TANDC />
<FTTERM>
<DESCRIPTN>No Freight Charge</DESCRIPTN>
<TERMID>NONE</TERMID>
</FTTERM>
<EXCHRATE />
<DATETIME qualifier="EXCHRATEDATE">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="APPREQ" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<CONFIRM>N</CONFIRM>
<SHIPPINGCONTROL />
<DFFPOHEADER>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFPOHEADER>
<PCARDHDR>
<MEMBERNAME />
<PCARDNUM />
<DATETIME qualifier="EXPIRATION">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<PCARDBRAND />
</PCARDHDR>
</USERAREA>
<PARTNER>
<NAME index="1">Nate OD88/VIS2 Supplier TEST</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>20027</PARTNRID>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX>1923</PARTNRIDX>
<TAXID />
<TERMID />
<USERAREA>
<DFFVENDOR>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFVENDOR>
<CUSTOMERNUM />
</USERAREA>
<ADDRESS>
<ADDRLINE index="1">VIS2 address</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN>VIS2/OD88 SITE</DESCRIPTN>
<FAX index="1" />
<POSTALCODE />
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA>
<DFFVENDORSITE>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFVENDORSITE>
</USERAREA>
</ADDRESS>
<CONTACT>
<NAME index="1" />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1">-</TELEPHONE>
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>SoldTo</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TAXID />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1">222 Oracle Way</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE>20190</POSTALCODE>
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
<CONTACT>
<NAME index="1">Ross, Nate</NAME>
<CONTCTTYPE />
<DESCRIPTN />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
<USERAREA />
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>BillTo</PARTNRTYPE>
<CURRENCY />
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1">222 Oracle Way</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE>20190</POSTALCODE>
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
</PARTNER>
<PARTNER>
<NAME index="1">UPS</NAME>
<ONETIME>0</ONETIME>
<PARTNRID />
<PARTNRTYPE>Carrier</PARTNRTYPE>
<PARTNRIDX>UPS</PARTNRIDX>
</PARTNER>
<POTERM>
<DESCRIPTN>Scheduled for payment 45 days from the invoice date (invoice terms date = system date, goods received date, invoice date or invoice received date). Invoice terms date can default from supplier header, site, PO, system default, etc.</DESCRIPTN>
<TERMID>45 Net (terms date + 45)</TERMID>
<DAYSNUM />
<QUANTITY qualifier="PERCENT">
<VALUE />
<NUMOFDEC />
<SIGN />
<UOM />
</QUANTITY>
<USERAREA />
</POTERM>
</POORDERHDR>
<POORDERLIN>
<QUANTITY qualifier="ORDERED">
<VALUE>3</VALUE>
<NUMOFDEC />
<SIGN>+</SIGN>
<UOM>QT</UOM>
</QUANTITY>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>89</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM>QT</UOM>
</OPERAMT>
<POLINENUM>1</POLINENUM>
<HAZRDMATL />
<ITEMRV>0</ITEMRV>
<ITEMRVX />
<POLNSTATUS />
<DESCRIPTN>10-40W Car / Truck Motor Oil</DESCRIPTN>
<ITEM>10-40W Oil</ITEM>
<ITEMX />
<USERAREA>
<REQUESTOR />
<CATEGORYID>MISC.MISC</CATEGORYID>
<CONTRACTNUM />
<CONTRACTPONUM />
<CONTRACTPOLINENUM />
<VENDORQUOTENUM />
<CONFIGID />
<LISTPRICE>.89</LISTPRICE>
<MARKETPRICE />
<PRICENOTTOEXCEED />
<NEGPRICE>N</NEGPRICE>
<TAXABLE>N</TAXABLE>
<TXNREASONCODE />
<TYPE1099 />
<LINEORDERTYPE>Goods</LINEORDERTYPE>
<HAZRDUNNUM />
<HAZRDUNDESC />
<DFFLINE>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFLINE>
<DFFITEM>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10>Y</ATTRIBUTE10>
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFITEM>
<KFFITEM>
<ATTRIBUTE1>MISC</ATTRIBUTE1>
<ATTRIBUTE2>MISC</ATTRIBUTE2>
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
<ATTRIBUTE17 />
<ATTRIBUTE18 />
<ATTRIBUTE19 />
<ATTRIBUTE20 />
</KFFITEM>
<GLOBALCONTRACT />
<GLOBALCONTRACTLIN />
<JOBTITLE />
<AMOUNT qualifier="TOTAL" type="T">
<VALUE />
<NUMOFDEC />
<SIGN />
<CURRENCY />
<DRCR>C</DRCR>
</AMOUNT>
<CONTRACTORFIRSTNAME />
<CONTRACTORLASTNAME />
<DATETIME qualifier="ACTSTART" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="ACTEND" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
</USERAREA>
<POLINESCHD>
<DATETIME qualifier="NEEDDELV" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<QUANTITY qualifier="ORDERED">
<VALUE>3</VALUE>
<NUMOFDEC />
<SIGN>+</SIGN>
<UOM>QT</UOM>
</QUANTITY>
<DESCRIPTN />
<PSCLINENUM>1</PSCLINENUM>
<USERAREA>
<DATETIME qualifier="PROMSHIP">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<DATETIME qualifier="APPROVAL">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>08</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>.89</VALUE>
<NUMOFDEC />
<SIGN />
<CURRENCY>USD</CURRENCY>
<UOMVALUE />
<UOMNUMDEC />
<UOM />
</OPERAMT>
<PRICEOVRRD />
<TAXABLE>N</TAXABLE>
<TAXCODE />
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>ShipTo</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1" />
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY />
<COUNTRY />
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE />
<REGION />
<STATEPROVN />
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
<CONTACT>
<NAME index="1" />
<CONTCTTYPE />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1" />
<ONETIME />
<PARTNRID />
<PARTNRTYPE />
<PARTNRIDX />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1" />
<ADDRLINE index="2" />
<ADDRTYPE />
</ADDRESS>
<CONTACT>
<NAME index="1" />
<CONTCTTYPE />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
</CONTACT>
</PARTNER>
<DROPSHIPDETAILS>
<DROPSHIPMENT />
<DROPSHIPCUSTNAME />
<SHIPINSTR />
<PACKINSTR />
<SHIPMETHOD />
<CUSTOMERPONUM />
<CUSTOMERLINENUM />
<CUSTOMERSHIPNUM />
<CUSTOMERDESC />
</DROPSHIPDETAILS>
<CONSIGNEDINV>N</CONSIGNEDINV>
<AMOUNT qualifier="TOTAL" type="T">
<VALUE />
<NUMOFDEC />
<SIGN />
<CURRENCY />
<DRCR>C</DRCR>
</AMOUNT>
</USERAREA>
</POLINESCHD>
</POORDERLIN>
</PROCESS_PO>
</DATAAREA>
</PROCESS_PO_007>
</part>
</Receive_Dequeue_InputVariable>
Assign_Input2Output
[2006/04/04 10:03:57] Updated variable "Invoke_Enqueue_InputVariable" More...
<Invoke_Enqueue_InputVariable>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="ReceiveDocument">
<ReceiveDocument xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">
<CNTROLAREA xmlns="">
<BSR>
<VERB value="PROCESS">PROCESS</VERB>
<NOUN value="PO">PO</NOUN>
<REVISION value="007">007</REVISION>
</BSR>
<SENDER>
<LOGICALID>ORACLE</LOGICALID>
<COMPONENT>PURCHASING</COMPONENT>
<TASK>POISSUE</TASK>
<REFERENCEID>VIS.US.ORACLE.COM:oracle.apps.po.event.xmlpo:32570-148852</REFERENCEID>
<CONFIRMATION>0</CONFIRMATION>
<LANGUAGE>US</LANGUAGE>
<CODEPAGE>UTF8</CODEPAGE>
<AUTHID>APPS</AUTHID>
</SENDER>
<DATETIME qualifier="CREATION" type="T" index="1">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>13</HOUR>
<MINUTE>02</MINUTE>
<SECOND>29</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
</CNTROLAREA>
<DATAAREA xmlns="">
<PROCESS_PO>
<POORDERHDR>
<DATETIME qualifier="DOCUMENT" type="T" index="1">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>13</HOUR>
<MINUTE>00</MINUTE>
<SECOND>45</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<OPERAMT qualifier="EXTENDED" type="T">
<VALUE>267</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM />
</OPERAMT>
<POID>4484</POID>
<POTYPE>STANDARD</POTYPE>
<ACKREQUEST>N</ACKREQUEST>
<CONTRACTB />
<CONTRACTS />
<DESCRIPTN />
<PORELEASE />
<USERAREA>
<DATETIME qualifier="ACTSTART" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="ACTEND" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<FOB>
<DESCRIPTN>Vendor's responsibility ceases upon transfer to carrier</DESCRIPTN>
<TERMID>Origin</TERMID>
</FOB>
<TANDC />
<FTTERM>
<DESCRIPTN>No Freight Charge</DESCRIPTN>
<TERMID>NONE</TERMID>
</FTTERM>
<EXCHRATE />
<DATETIME qualifier="EXCHRATEDATE">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="APPREQ" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<CONFIRM>N</CONFIRM>
<SHIPPINGCONTROL />
<DFFPOHEADER>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFPOHEADER>
<PCARDHDR>
<MEMBERNAME />
<PCARDNUM />
<DATETIME qualifier="EXPIRATION">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<PCARDBRAND />
</PCARDHDR>
</USERAREA>
<PARTNER>
<NAME index="1">Nate OD88/VIS2 Supplier TEST</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>20027</PARTNRID>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX>1923</PARTNRIDX>
<TAXID />
<TERMID />
<USERAREA>
<DFFVENDOR>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFVENDOR>
<CUSTOMERNUM />
</USERAREA>
<ADDRESS>
<ADDRLINE index="1">VIS2 address</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN>VIS2/OD88 SITE</DESCRIPTN>
<FAX index="1" />
<POSTALCODE />
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA>
<DFFVENDORSITE>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFVENDORSITE>
</USERAREA>
</ADDRESS>
<CONTACT>
<NAME index="1" />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1">-</TELEPHONE>
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>SoldTo</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TAXID />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1">222 Oracle Way</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE>20190</POSTALCODE>
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
<CONTACT>
<NAME index="1">Ross, Nate</NAME>
<CONTCTTYPE />
<DESCRIPTN />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
<USERAREA />
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>BillTo</PARTNRTYPE>
<CURRENCY />
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1">222 Oracle Way</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE>20190</POSTALCODE>
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
</PARTNER>
<PARTNER>
<NAME index="1">UPS</NAME>
<ONETIME>0</ONETIME>
<PARTNRID />
<PARTNRTYPE>Carrier</PARTNRTYPE>
<PARTNRIDX>UPS</PARTNRIDX>
</PARTNER>
<POTERM>
<DESCRIPTN>Scheduled for payment 45 days from the invoice date (invoice terms date = system date, goods received date, invoice date or invoice received date). Invoice terms date can default from supplier header, site, PO, system default, etc.</DESCRIPTN>
<TERMID>45 Net (terms date + 45)</TERMID>
<DAYSNUM />
<QUANTITY qualifier="PERCENT">
<VALUE />
<NUMOFDEC />
<SIGN />
<UOM />
</QUANTITY>
<USERAREA />
</POTERM>
</POORDERHDR>
<POORDERLIN>
<QUANTITY qualifier="ORDERED">
<VALUE>3</VALUE>
<NUMOFDEC />
<SIGN>+</SIGN>
<UOM>QT</UOM>
</QUANTITY>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>89</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM>QT</UOM>
</OPERAMT>
<POLINENUM>1</POLINENUM>
<HAZRDMATL />
<ITEMRV>0</ITEMRV>
<ITEMRVX />
<POLNSTATUS />
<DESCRIPTN>10-40W Car / Truck Motor Oil</DESCRIPTN>
<ITEM>10-40W Oil</ITEM>
<ITEMX />
<USERAREA>
<REQUESTOR />
<CATEGORYID>MISC.MISC</CATEGORYID>
<CONTRACTNUM />
<CONTRACTPONUM />
<CONTRACTPOLINENUM />
<VENDORQUOTENUM />
<CONFIGID />
<LISTPRICE>.89</LISTPRICE>
<MARKETPRICE />
<PRICENOTTOEXCEED />
<NEGPRICE>N</NEGPRICE>
<TAXABLE>N</TAXABLE>
<TXNREASONCODE />
<TYPE1099 />
<LINEORDERTYPE>Goods</LINEORDERTYPE>
<HAZRDUNNUM />
<HAZRDUNDESC />
<DFFLINE>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFLINE>
<DFFITEM>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10>Y</ATTRIBUTE10>
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFITEM>
<KFFITEM>
<ATTRIBUTE1>MISC</ATTRIBUTE1>
<ATTRIBUTE2>MISC</ATTRIBUTE2>
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
<ATTRIBUTE17 />
<ATTRIBUTE18 />
<ATTRIBUTE19 />
<ATTRIBUTE20 />
</KFFITEM>
<GLOBALCONTRACT />
<GLOBALCONTRACTLIN />
<JOBTITLE />
<AMOUNT qualifier="TOTAL" type="T">
<VALUE />
<NUMOFDEC />
<SIGN />
<CURRENCY />
<DRCR>C</DRCR>
</AMOUNT>
<CONTRACTORFIRSTNAME />
<CONTRACTORLASTNAME />
<DATETIME qualifier="ACTSTART" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="ACTEND" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
</USERAREA>
<POLINESCHD>
<DATETIME qualifier="NEEDDELV" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<QUANTITY qualifier="ORDERED">
<VALUE>3</VALUE>
<NUMOFDEC />
<SIGN>+</SIGN>
<UOM>QT</UOM>
</QUANTITY>
<DESCRIPTN />
<PSCLINENUM>1</PSCLINENUM>
<USERAREA>
<DATETIME qualifier="PROMSHIP">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<DATETIME qualifier="APPROVAL">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>08</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>.89</VALUE>
<NUMOFDEC />
<SIGN />
<CURRENCY>USD</CURRENCY>
<UOMVALUE />
<UOMNUMDEC />
<UOM />
</OPERAMT>
<PRICEOVRRD />
<TAXABLE>N</TAXABLE>
<TAXCODE />
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>ShipTo</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1" />
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY />
<COUNTRY />
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE />
<REGION />
<STATEPROVN />
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
<CONTACT>
<NAME index="1" />
<CONTCTTYPE />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1" />
<ONETIME />
<PARTNRID />
<PARTNRTYPE />
<PARTNRIDX />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1" />
<ADDRLINE index="2" />
<ADDRTYPE />
</ADDRESS>
<CONTACT>
<NAME index="1" />
<CONTCTTYPE />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
</CONTACT>
</PARTNER>
<DROPSHIPDETAILS>
<DROPSHIPMENT />
<DROPSHIPCUSTNAME />
<SHIPINSTR />
<PACKINSTR />
<SHIPMETHOD />
<CUSTOMERPONUM />
<CUSTOMERLINENUM />
<CUSTOMERSHIPNUM />
<CUSTOMERDESC />
</DROPSHIPDETAILS>
<CONSIGNEDINV>N</CONSIGNEDINV>
<AMOUNT qualifier="TOTAL" type="T">
<VALUE />
<NUMOFDEC />
<SIGN />
<CURRENCY />
<DRCR>C</DRCR>
</AMOUNT>
</USERAREA>
</POLINESCHD>
</POORDERLIN>
</PROCESS_PO>
</DATAAREA>
</ReceiveDocument>
</part>
</Invoke_Enqueue_InputVariable>
Invoke_QUEUE (faulted)
[2006/04/04 10:03:59] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. less
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>null</code>
</part>
<part name="summary">
<summary>file:/d01/oraAS/integration/orabpel/domains/default/tmp/.bpel_XML2APPS_1.0.jar/CreatePO.wsdl [ Enqueue_ptt::Enqueue(ReceiveDocument) ] - WSIF JCA Execute of operation 'Enqueue' failed due to: Enqueue failed. Enqueue failed. ; nested exception is: ORABPEL-11947 Enqueue failed. Enqueue failed. Please examine the log file to determine the problem.</summary>
</part>
<part name="detail">
<detail>null</detail>
</part>
</remoteFault>
WS-T Complete
WS-T Close
WS-T Fault
WS-T Cancel
WS-T Compensate
</sequence>
[2006/04/04 10:03:59] "BPELFault" has not been caught by a catch block.
[2006/04/04 10:03:59] BPEL process instance "18" cancelled
WS-T Complete
WS-T Close
WS-T Fault
WS-T Cancel
WS-T Compensate
</process>
Does anyone know where I can get help on an error message ORABPEL-11947? I looked everywhere but no success.
Can someone help me on this?
Thanks in advance,
SookYou have to integrate apps with BPEL using apps adapter and then from BPEL pass the message to Oracle B2B 11g -
Oracle B2B 11g <---> Oracle BPEL 11g <--- Oracle Apps Adapter --> Oracle Apps
As BPEL and B2B both are part of SOA suite 11g hence there is no additional cost and performance remain better.
Preffered mode of integration would be through XML gateway.
I could see that 856 outbound EDI map is available from Oracle but not the XML gateway map. If i have to use XML gateway then how i can create the XML gateway map.You may raise your question in apps forum -
http://forums.oracle.com/forums/category.jspa?categoryID=108
If you don't get any help there, raise a case with support.
Regards,
Anuj
Edited by: Anuj Dwivedi on Oct 12, 2010 11:58 AM -
Need to restrict KFF values on Charge Account Screen in Oracle Apps 11i
Hi,
I have a requirement to restrict KFF values based on certain criteria in the charge account screen in Oracle Apps 11i..
Could you pls advise on how this can be achieved.
Thanks,
Shashank
Edited by: Shashank Senan on May 23, 2012 2:53 PMCan you please mark my answers correct......if they were helpful to you.....
That would be so nice of you....:-)
and regarding your next requirement, You should create a new table which will contain Date, Worker Number and any other details that you want.
In the form, for every date for which you want to enter the data, you will select the max(date) before the current date and maximum worker number for that selected date and then from that number you can select next 15/20 workers or whatever your number is.
e.g. for the first time if you want to enter data for 01-jul-2010 and you have work for 15 workers, you will select max(date) where date<01-jul-2010, but you will not find any bcoz this is your first entry. So wat you will do is will start popupating your grid from number 1-15.
Next day you will select max(date) where date<02-jul-2010, you will find 01-jul-2010. Then you will select max(number) for 01-jul-2010, you will find 15. So populate your grid from number 16-30 (whatever your number is). and so on.
Hope it helps you...
Please mark my answer Helpful or correct and Please create a new thread for new question
Thanks
Nishu -
Requirement to enable auditing on every form in Oracle apps 11i,Dynamically
Hello All,
I have following requirement Oracle apps 11i forms6i:
Client want to audit the changes in data which user does on the oracle form and save old values and new values in DB table.
Currently they do have this system working but, only for some forms.
Now they want generic. Means, user will navigate to any form in Oracle apps. there he will get Menu option in menu "Enable this form for auditing". After pressing this menu option, another form will come where he will be able to see all fields on the form with check box in front of each field.
Here user will select those fields which he want to enable for auditing.
Thereafter all changes which user do on the form, those old and new values will get store in one custom table.
Since information about fields is not stored in database, how can I make it generic. So that user will navigate to any form in oracle apps and will be able to enable it for auditing?
can we do this by using any interface with Java with oracle form?
Let me know, if my requirement is not clear to you.
Regards,
ParagParag,
This is the General Forms discussion forum. Please post your question in the [EBS General Discussion|http://forums.oracle.com/forums/forum.jspa?forumID=475] forum. Having worked with EBS several years ago, I confident that Oracle already has an Auditing feature built into their system, I just don't recall how it is implemented or if it would work for your situation where the customer wants to turn it on and off on the fly. To be honest, I'm not sure it is a good design to allow the user to enable/disable auditing as this just seems to violate the "Auditing Paradigm." In any case, someone in the EBS Forum would be better able to answer your question.
Craig... -
Hi,
we are working in oracle apps 11i. I have an application report developed by an ex-employee that I would like to add a new parameter to .
I use reports builder 6i . The reports consists of 6 queries and I'm facing the following issues:
1. when running the report from Oracle Reports builder I can use the second parameter. But from the application request form the report generates no data when the very same set of parameters is used. What can be the problem? What do I need to check?
2. Can I outer join the queries in reports builder .If yes, how can I do that? From where?
Regards,Pl also post this in the Reports forum - Reports
HTH
Srini -
Oracle iPortal Integration with Oracle Apps 11i via SSO
How can we integrate Oracle iPortal with Oracle Apps 11i via SSO?
Is there any documentation on this topic that anybody could share ([email protected])? I have already searched the Portal Studio and the Metalink without much success.
Any suggestions and possible recommendations/solutions are highly appreciated! Thank you for answering this post!
Best regards,
Lina Danchenko
P.S. I am unable to view the note 146469.1 Configuring Oracle Applications with Oracle Portal on the Metalink. Any idea where I can find it? Thanks in advance!In a future release, Oracle Apps will be integrated with SSO out of the box.
Currently there is a pilot program which several companies are participating in to beta-test this
integration, but this program is not open to additional customers.
Please speak with your Oracle sales representative to get a better idea of current options
and general availability dates.
You do have the option now of just configuring Oracle Apps as an External Application. -
Error while clonning Oracle app 11i
Hi all Once again, a new day a new error :)
i am having Error while clonning Oracle app 11i on windows 2003 sp1 32 bit db 9.2.0.6.0
when running adcfgclone.pl dbTier it successfully runs uptill 70% at this stage it throws the below error
================================================================================================
Beginning database tier Apply - Wed Mar 7 01:49:19 2012
Log file located at d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\ApplyDBTier_03070149.log
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
ERROR: Failed to execute adclone.pl
Please check logfile.
=================================================================================================
when i check the ApplyDBTier_03070149.log
i found this below
==============================================================================================================================================================================================================================
Skipping Profile Phase
Skipping Apply Phase
Executing StartDbLsnr...
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:50 AM
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:50 AM
NPRO_hassan.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\neproddb\9.2.0
LOCAL : NPRO
ORACLE_SID :
PATH : d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\neproddb\9.2.0\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;../jre/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe;C:\mksnt\bin;C:\mksnt\bin\X11;C:\mksnt\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\bin;;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH : d:\oracle\neproddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process NPRO ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 07-MAR-2012 01:50:56
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCNPRO))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=hassan.com)(Port=1534))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 07-MAR-2012 01:50:57
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
NL-00280: error creating log stream d:\oracle\neproddb\9.2.0\network\log\npro.log
NL-00278: cannot open log file
SNL-00016: snlfohd: error opening file
32-bit Windows Error: 13: Permission denied
Listener failed to start. See the error message(s) above...
addlnctl.cmd exiting with status 3
.end std out.
.end err out.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hassan
sDbDomain : com
sDbPort : 1534
sDbSid : NPRO
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:51 AM
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:51 AM
NPRO_hassan.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\neproddb\9.2.0
LOCAL : NPRO
ORACLE_SID :
PATH : d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\neproddb\9.2.0\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;../jre/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe;C:\mksnt\bin;C:\mksnt\bin\X11;C:\mksnt\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\bin;;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH : d:\oracle\neproddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\adcrdb_NPRO.txt"
ECHO is off.
ECHO is off.
Creating the control file for NPRO database ...
ECHO is off.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:01 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
O/S-Error: (OS 2) The system cannot find the file specified.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:42 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ECHO is off.
Checking for errors ...
ECHO is off.
The database has not been successfully created. Shutting down the instance...
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:52 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
adcrdb.cmd exiting with status 1
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hassan
sDbDomain : com
sDbPort : 1534
sDbSid : NPRO
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:474)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:319)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:295)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at java.lang.reflect.Constructor.newInstance(Native Method)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Unknown Source)
==============================================================================================================================================================================================================================
please help me out with your advices
Thanks
HassanDear Hussein / helios ,
it worked finally i gave a high number 76 and it worked with out any problem also this time i gave loop back adapter an ip address i just remember now that i was not giving an ip to my loop back adapter i gave as below
ip : 10.10.10.10
subnet : 255.255.255.0
and made my host file look like as
127.0.0.1 localhost
10.10.10.10 hassan.com hassan
then i tested the ping by pinging hassan.com and the reply came from 10.10.10.10
and also i disabled my wireless network card before running adcfgclone
and it worked ALLHAMDOLLILAH :)
Thanks to the great masters Hussein & Helios :)
Now its time for appsTier cloning hope that it goes smooth :)
Regards,Re: Error while clonning Oracle app 11i
Hassan -
Registering Forms in Oracle Apps 11i
Hi hussein,
This is the docs for registering an Oracle Form in Oracle Apps 11i.
To Register a custom form in Oracle Applications, take the following steps.
(As practice, copy the form FNDRSRUN.fmx under the $FND_TOP/forms to a file
called RUNRPT.fmx. The form RUNRPT.fmx will now be used in the following steps.)
1.Log into the Applications Developer responsibility
2.Navigate to Application > Form
3.Enter the form name under the "Form" column
RUNRPT
4.Enter the Application under the "Application" column using the list of value
button, or the "List of Values" function under the "Edit" menu option.
Application Object Library
5.Enter a name for the form under the "User Form Name" column
My Report Run Form
6.Enter a description for the form under the "Description" column
Custom Report Run Form
7.Save
[\code]
My question is, how do I run the form in the Oracle Apps? After registering it.
And this is also another doc:Rgistering form will takes following steps
1) Create custom form
2) place it in CUSTOM_TOP in unix box
3) compile form with f60 gen and check whether compiled form .fmx is generated.
4) register your from
Registering a Form
Navigation – Application Developer -> Application->Form
5) Register Form Functions
Navigation – Application Developer -> Application->Function
6) attach it to menu.
7) menu must be submenu to menu or attached as to responsibility from which you are going to run form.
For report we are attaching concurrent program to responsibility but here form function must be attached to Menu.
My question is, how do I know if a form has a function that needs to be registered?
Thanks a lot
mskHi,
My question is, how do I run the form in the Oracle Apps? After registering it.You already have the steps in your post, just add the form to the menu and attach it to the responsibility.
My question is, how do I know if a form has a function that needs to be registered?Sorry, I cannot be of much help here, but you may check the Developer Guide and see if it helps.
Oracle Applications Developer's Guide
http://download.oracle.com/docs/cd/B25284_01/current/acrobat/115devg.pdf
Regards,
Hussein -
Error in starting services in oracle apps 11i
oracle apps 11i ,OEL 5.
[oracle@apps VIS_apps]$ /u01/apps/viscomn/admin/scripts/VIS_apps/addisctl.sh start
addisctl.sh version 115.14
/u01/apps/visora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /u01/apps/visora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /u01/apps/visora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Cannot bind to OAD. Re-starting...
OAD is stopped
Osagent is stopped
Unable to stop locator. No process-id file found.
Unable to stop gatekeeper. No process-id file found.
Unable to stop any Discoverer Sessions. No process-id file found.
Unable to stop any Discoverer Preference. No process-id file found.
Unable to stop any Discoverer Collector. No process-id file found.
/u01/apps/visora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /u01/apps/visora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /u01/apps/visora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Registering Discoverer Session
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Registering the Collector
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Applying preferences from file : /u01/apps/visora/8.0.6/discwb4/util/pref.txt
Finished applying preferences
Closing down registry..
Memory fault
Registering Discoverer Preference Repository
/u01/apps/visora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
addisctl.sh: exiting with status 1
even i tried applying
set LD_ASSUME_KERNEL
even same result.please see this
EBS R11i - GLIBC_2.0 not defined in file 'libc.so.6' with link time reference (libzip.so) [ID 806345.1]
addisctl.sh fails with Errors : GLIBC_2.0 not defined in file libc.so.6 [ID 383046.1]
Error When Trying To Start Discoverer (Addisctl.Sh) [ID 854976.1]
What should the value of LD_ASSUME_KERNEL be set to for Linux? [ID 377217.1]
:) AppsmAsti :)
Sharing is Caring -
How to send bulk mail in oracle apps 11i with pdf/Xls attachment
hi,
how to send bulk emails in one go ( aprrox 150-200 emails in one go) with attachment pdf file in oracle apps 11i
thanksI'd use BI Publisher (XML Publisher) Bursting.
Regards,
Gareth
http://garethroberts.blogspot.com
http://www.virtuate.com -
Oracle 10g AS pacth for Oracle Apps 11i
Hi everyone,
I have installed Oracle 10g AS (10.1.2.0.2) for Oracle Business Intelligence on Sun Solaris 10 (64 bit) and integrated it with Oracle Apps 11i (11.5.10.2).
Everything seems fine but i am facing problems like
1) Toolbars not appearing correctly sometimes like it is disabled and enables by itself.
2)sometimes clients come accross "Connection with Server lost..." error while taking export (very few).
3) Its giving the error (mentioned at the end) only on one client machine while taking export to Excel.
I have tried installing Oracle 10g AS patch set 2 10.1.2.2 for Solaris but the problem persisits. Is patch set 2 compatible or certified with Oracle Apps 11i? if not then is there any other work around or do i have to wait for some new patch.
Thanx for your inputs.
Najeeb
Java(TM) Plug-in: Version 1.4.2_06
Using JRE version 1.4.2_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\ASHIBEL
Proxy Configuration: Manual Configuration
Proxy: http=EMRPXY1:80,https=EMRPXY1:80,ftp=EMRPXY1:80,gopher=EMRPXY1:80
Proxy Overrides: emrpxy1:80,<local>
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Installed custom security manager
Could not assertPermission PermissionID.SYSTEM for IE
This can cause "Warning : Applet Window" to be displayed when running with IE
attempt 1: adding Protocol.protocol -> rmi
attempt 1: adding default Protocol.timeoutsecs -> 40
attempt 1: adding RMIProtocol.transport -> http
attempt 1: adding RMIProtocol.servletalias -> /discoverer/plus
attempt 1: adding RMIProtocol.hijacksessionid -> 1
attempt 1: adding RMIProtocol.httpsessionid -> jsessionid=0a43ce3430d605f5e434046d403ea5e9f219eb3784b7.e34QahyNbx0Ka40La3ySahuRbhmOe6fznA5Pp7ftolbGmkTy
attempt 1: adding default Protocol.codebase -> http://discoverer.emaar.ae:7777/disco/plus_files/
attempt 2: adding Protocol.protocol -> rmi
attempt 2: adding default Protocol.timeoutsecs -> 40
attempt 2: adding RMIProtocol.transport -> https
attempt 2: adding RMIProtocol.servletalias -> /discoverer/plus
attempt 2: adding RMIProtocol.hijacksessionid -> 1
attempt 2: adding RMIProtocol.httpsessionid -> jsessionid=0a43ce3430d605f5e434046d403ea5e9f219eb3784b7.e34QahyNbx0Ka40La3ySahuRbhmOe6fznA5Pp7ftolbGmkTy
attempt 2: adding default Protocol.codebase -> http://discoverer.emaar.ae:7777/disco/plus_files/
Discoverer Model - 10.1.2.48.18
New LOOKUP
Lookup Requested
Performing lookup RMI lookup: http://discoverer.emaar.ae:7777//discoverer/plus
Reading bytes from input stream
Unmarshalling response
Session ID:2007061817102717616
BI Beans Graph version [3.2.2.0.24]
BI Beans Graph version [3.2.2.0.24]
The export/print operation failed
Worker oracle.disco.publish.PublishData@6ffeb, command=ExportData failed with DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0 wrapping exception oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
Error: DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
at oracle.disco.remote.corba.RMIToCorba.convertRemoteException(Unknown Source)
at oracle.disco.model.corbaserver.ModelInterface._handleGenericExceptions(Unknown Source)
at oracle.disco.model.corbaserver.ModelInterface.getBinaryData(Unknown Source)
at oracle.disco.model.corbaserver.ModelInterface.GetBinaryData(Unknown Source)
at oracle.disco.model.corbaserver.serverrequest.DsrBinaryExport.xmlUpdateServer(Unknown Source)
at oracle.disco.model.corbaserver.serverrequest.DsrCorbaXML.corbaUpdateServer(Unknown Source)
at oracle.disco.model.corbaserver.serverrequest.DsrGeneralCorbaXML.updateServer(Unknown Source)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl._nonReentrantExecute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.export.ExportInputStream._readBuffer(Unknown Source)
at oracle.disco.model.corbaserver.export.ExportInputStream.read(Unknown Source)
at java.io.InputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at oracle.disco.publish.PublishData._writeBinaryData(Unknown Source)
at oracle.disco.publish.PublishData._exportSheets(Unknown Source)
at oracle.disco.publish.PublishData.runDiscoWorker(Unknown Source)
at oracle.disco.worker.DiscoWorker.runWorker(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorker.run(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue._runWorker(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue.access$100(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext._run(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext._runMaybeBlocked(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext.run(Unknown Source)
at oracle.bali.ewt.worker.ThreadWorkerQueue$TaskAdapter.runTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler.runTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler.processTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler$TaskQueue.run(Unknown Source)
at oracle.bali.share.thread.Timer.doRun(Unknown Source)
at oracle.bali.share.thread.Timer.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Hi
The last I heard is that 10.1.2.2 is not yet certified for use against E-Business Suite unless your operating system is Linux. Please take a look at this posting on Steven Chan's blog: http://blogs.oracle.com/schan/2007/04/23
The issues you are encountering, particularly the one with the toolbars disappearing, were fixed in patch 5345528 as described on my blog here: http://learndiscoverer.blogspot.com/2006/08/more-to-toolbar-icons-graying-out.html
I would advise you to go for this patch first until Oracle certify 10.1.2.2. for Sun.
Best wishes
Michael -
User Peference in Oracle Apps 11i
HI
One of my user has changed his peference to skip OA framework page which list responsibility.(Now directly logiing to forms)
Now he wants to revert it back,can someone help me to resolve this issue.
Due to some security issue I dont wan to assign the user 'Preferences SSWA' responsibility
Can someone please help me
ls there anyway to control user peference as sysadmin
Thanks in advanceDuplicate thread ..
User Peference in Oracle Apps 11i
User Peference in Oracle Apps 11i -
View Output/View Log options are redirecting to browser automatically in Oracle Apps 11i
Hi,
Can any one please let me know the what is the option to change popup options in oracle apps 11i.
My requirement is when I click on view Output/View Log options it should pop up there itself rather than redirecting to browser.
Application version is : 11.5.10.2
Thanks,
GovindHi,
Clear the value for the following profile option:
Viewer: Text
Regards,
Bashar -
What does APP.FND-01238 error mean in oracle apps 11i?
In Oracle Apps 11i after opening person detail screen, It says cannot set value for field PADDV.CREATED_BY and gives APP.FND-01238 error.
Can anybody help me with that?Please see these docs.
APP-FND-01238:Extra Information Flexfield Error on People form [ID 368874.1]
Cannot Query Element Link Using People Group Field, Getting Error: 'APP-FND-01238 CANNOT SET VALUE FOR FIELD LINK.PEOPLE_GROUP_ID ERROR ON QUERY', How Can This be Accomplished? [ID 967058.1]
Translation Issues In Form PERWSDOR [ID 1103968.1]
Thanks,
Hussein -
How to access virtual folder in oracle apps 11i?
Hi,
how to access virtual folder in oracle apps 11i?
Version=11.5.10.2
please help
Thanks,I'd use BI Publisher (XML Publisher) Bursting.
Regards,
Gareth
http://garethroberts.blogspot.com
http://www.virtuate.com
Maybe you are looking for
-
Hi, How can i upload sap data from backup? OS AIX 5.3 DB Oracle 10i
-
Why is my project so big?
Hi guys, *using DVDSP4 I'm having trouble with a large project that I am working on. It is mainly consisted of many menus (using .psd files), and some m2v menus as well. The project is about India. So it is ALL the states of India with a brief summar
-
Determining if a request has timed out
My code creates an NSMutableURLRequest, then uses a NSURLConnection to make a http request. I am combing the documentation but I cannot find how to determine if the request has timedout, i.e. I want to handle the timeout before the error is displayed
-
What is the best strategy to purge a set of database tables.
Hi, I have 6 tables I would require to purge data from. 1 parent table - All of the data that needs to be purged are from a partition created on this table 5 child table - Using the parent record identifier, these records needs to be purged as well.
-
Revenue at fixed exchange rate and Tax at current exchange rate.
Hello, We have a requirement wherein a foreign currency sales order is negotiated at fixed exchange rate. At the time of billing while revenue should be booked at negotiated exchange rate, tax(mwst) should be calculated at current exchange rate. Is