Oracle BI 10g Drill Down

I have a problem when I drill down through a hierarchy...
imagine this hierarchy: year > half > quarter
I start the report only with the year column and click to drill... naturally OBIEE opens the half column and then I can press on the year column again to make another dill or I can press on the half column to drill, both this options open the desired column (quarter) but in different ways:
if I press the year column again the report shows:
year > quarter > half
and if I press the half column the report shows:
year > half > quarter
and this second behavior is what I need! Is there any way to get the second behavior when pressing the year column?

I don't think its possible too... but I have a client that has this requisite in a project so I'm trying to find a definitive answer whether that can be done or not. Thanks! If I find an answer I'll share it!

Similar Messages

  • OBIEE 10g Drill Down Chart From Axis Label

    Hello All
    Does any one know if OBIEE 10g can drill down values in a chart by clicking the axis labels of the charts.
    In other words, if there was a bar chart with two bars, one for May and one for June, could a user click on the label 'May' or 'June' to drill down in the chart or can OBIEE only drill charts by clicking on the actual bar in the chart?
    Thanks!

    Hi,
    In 11g chart navigations have changed.They are now moved to the criteria level and are therefore not available in results view.In your case, navigate to the criteria ->interaction tab and add the target as action link.
    Refer-
    http://siebel.ittoolbox.com/groups/technical-functional/siebel-analytics-l/navigation-between-charts-obiee-11g-4086065
    Hope this helped/ answered
    Regards
    MuRam

  • Oracle BI 11g Drill down

    Hello, i'm trying to pass dynamic parameters from my parent report to child report in Oracle 11g BI publisher.In parent report in Datatable column "Orders_NUMBER"  i make this url query:
    http://bisrv1:7001/xmlpserver/myFolder/ChildReport.xdo?OrderNumParam={ORDER_NUMBER}&_xmode=0&_xf=analyze&_xpt=0
    but this Disable LINKs , if instead  {ORDER_NUMBER} i write some static value like = 123123 ,this parameter pass.How to get Dynamicly value from column of my Datatable and pass this value via URL to my child report .

    I don't think its possible too... but I have a client that has this requisite in a project so I'm trying to find a definitive answer whether that can be done or not. Thanks! If I find an answer I'll share it!

  • Drill down in obiee 10g

    Hi All,
    Is there any way when we drilldown a column instead of moving columns to the right side, we need it the columns to be moved to the bottom.
    Fro Example
    Country 4000
    When we click on Country basically it wil give
    Country State1 300
    ........... State2 200 etc...
    But we need
    Country 4000
    State1 300
    State2 200
    State3 100 etc..
    Again en we click on any state then it should be ike
    Country 4000
    State1 300
    ..District1 50
    ..District2 45
    ..district3 22 etc..
    Like the dimension hierarchy level drill down in 11g.
    https://blogs.oracle.com/robreynolds/entry/obiee_11g_new_feature_-_hierar
    Thanks

    No, there's no way to do this in 10g. Hierarchical columns allow this, but they were first introduced in 11g.
    JB

  • Drill Down Button in Reports 10g

    We use to use an option to call a report from a report in Reports 6i called drill down reports by using a BUTTON for each record.
    How can we achieve that in Reports 10g ?
    Regards
    Capri !!!
    Message was edited by:
    Capri
    Message was edited by:
    Capri

    Hello,
    You have to use hyperlinks :
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_concepts2.htm#i1029586
    2.2.5 About hyperlinks
    Regards

  • Register Drill-Down Reports in Oracle Apps 11i

    I understand the registration process for registering a drill-down Oracle*Report in Oracle Applications is more complex as for a standard Oracle*Report. Does anyone know what the steps are, or where I can find documentation on this.
    Any help appreciated.

    Hi,
    ah ok, now the situation gets clearer ;)
    Normally I would say that drill-down requires some kind of interactivity, so I am not sure if reports is the best way for this, because the functionality of reports is:
    enter parameters > run > view output. But for drill-down you need some more functionality: select a column/value where you want to drill-in or out, have some kind of hierarchy to select the "drill-level"... I don't think that this is foreseen in Reports 6i. So I would try maybe two different ways:
    1. design the report in a way that the users can select the drill-level (or level of detail) as a report parameter. For example you create a parameter "Detail Level" with possible values "Summary", "Detailed Rows". Based on the parameter value chosen the report returns different output. This keeps you of course limited to a certain, fixed set of drill-levels, but I think this is ok in most of the cases.
    2. Another option could be to create several different reports, for example one "Summary" report and one "detailed" report, and in the summary report you could include links (dynamic URLs) to the detailed report, and when the user clicks on a certain value in the Summary report, then the detailed report is started for that specific value. However this is a bit more complex, I'd go for the first option.
    But to get real drill-down functionality you should consider using Discoverer or BI Publisher technology, those are perfect for such kind of reports.
    kind regards,
    David.

  • How to build drill down reports in 10g

    Hi everybody,
    I want build the reports with drill down option.Can any one help regarding this.
    Also i want to publish that output in Excel sheet.
    Example:
    Monthly Commission Statement FOR <MM/YYYY>
    GAM CODE & GAM NAME :<GAM Code &GAM Name>     
    GAM UNIT CODE:          :<GAM Unit Code>     
    AM CODE & AM NAME     :<AM Code & AM Name>     
    AM UNIT CODE          :<AM Unit Code>     
    AGENT-CODE & AGENT NAME :<Agent Code &Agnet Name>     
    i wnat to drop down list for all those like MM/YYYY,GAM Code&GAM Name......
    Any document for this with screen shots.
    Thanks to all inadvance

    Maybe this?
    http://www.oracle.com/technology/documentation/reports.html
    For Excel report do a search there with 'DESFORMAT= spreadsheet'
    Hope helps you

  • Discoverer 10g r2 (SSL) drill down issue

    Hi,
    We have encountered a strange drill down problem with Discoverer Viewer. When configured to run in SSL mode on port 443, the drill feature in Discoverer Viewer doesn't work. When drilled, the generic html message "This page cannot be displayed" is seen. The problem disappears when the SSL port is changed to 4443 or when SSL is disabled. We don't come across this problem in Plus, no matter what the port is.
    The discoverer version is 10g r2 on Linux 2.4.
    Has anyone faced a similar problem? Thanks in advance for your inputs.
    Regards,
    Chethan

    Hi ,
    1. You need to include Perl 5.6.1 (or later) installed and in the PATH.
    2. Set the ORACLE_HOME environment variable to point to the BI Midtier Home.
    3. Add %ORACLE_HOME%\OPatch in the PATH
    4 . Once the one-off patch bundle is downloaded extract the patch contents under a directory
    5. Stop the service using opmnctl stopall
    6. Run Database OPATCH utility with the right parameters to proceed with the patch installation
    cd <directory where the patch contents were extracted >
    opatch apply
    7. Start the service using opmnctl startall
    You can see the list of patch installed by opatch lsinventory
    Thanks,
    Sutirtha

  • Drill down error in 10g - No Columns displayed

    When drilling down on OBIEE 10g reports sometimes the result is "No columns displayed", we cannot find any particular reason why this happened. The columns are available and should show up so it's perceived as an error for our users.
    Does anyone know how and why this happens and what a possible solution might be?
    Much appreciated!

    Hi SP,
    Check you have done the identifications properly in the multi provider. The error message shows for the SID Conflict for the particular infoobject. In RSRV Could you please run the following test and if there are any errors you can run repair.
    Tests in Transaction RSRV -> All Combined Tests   -> Master Data  -> Check Master Data for a Characteristic
    Regards

  • Drill down capability in Oracle Reports graphs - Is it possible

    Hello
    I was looking for drill down capability in graphs. Example my query returns parent - child relationship. It could have upto 3-4 levels. Is it possible to drill down on a per level basis using oracle graphs?
    Message was edited by:
    M@$$@cHu$eTt$

    What I've seen, is people using a component to render the graph (Flex Charting or something else) and then put that rendered graph in the form data before it's being merged with the template.
    Jasmin

  • Drill Down Charts - Oracle Graphics

    My understanding of drill down chart is when
    you click on the particular chart element in the Master chart the Detail chart should show up.
    But in my situation when I choose run from layout editor in oracle graphics, first the Master chart appears and then it automatically refreshes it with the Detail chart without user intervention. The Master
    chart appears as a minimized window.
    I am passing parameter between the Master chart and the detail chart.
    Could anyone tell me how to solve this
    and get the effect of drill down from
    Master Chart to show up the Detail Chart Please ?
    Thanks
    Mohan

    Hi Pradeep,
    You can careate your own dirlldown chart reports like :
    --Create a report using xtreem sample database
    --Crate two groups like Country & Reagion and use Yearly sales in your charts
    --Place a bar graph on your Country group footer and Region group footer.
    --Use Hide(Drill Down Ok) option for region group footer and suppress all other empty sections.
    --Now try to drill down through Country group to Region group.
    You will have to go through only help documents on drill down options in Crystal.
    You have to create a ODBC connection on server end also copy the xtreem database on your server to run you reports in infoview.
    Yes Crystal Reports 2008 supports multi level drill down.
    Thanks,
    Sastry

  • No drill down to details pivot table 10g

    In OBIEE 10g a drill down to Siebel CRM (using rowid) works perfectly when using a table. However when using a pivot table on the same criteria with the navigation specified the drill down does not show up. Any ideas?

    Please try to go to criteria and punch the column format of that column and use "Column Heading Interaction "
    Edited by: user13545914 on Jul 17, 2012 4:27 PM

  • Drill-down to other oracle applicaitons

    Hi!
    I am new to HTML DB. Is there a way to drill down other other oracle application pages (with different application frameworks, ie OA Framework) from a HTML DB Report?
    Regards,
    Shahin

    Shahin,
    When you situate a link on a report line, the link is available to click on and when you do so you'll go wherever it leads. However, there is no automatic linkage between your application and other applications, whether the supporting technologies are common or disparate, beyond that which you deliberately plan for and implement, for example, in the area of authentication, session management, reciprocal awareness of application cookies, and inter-application navigation. But without doing anything special in these areas, you could provide a link to an Oracle apps page in your HTML DB report. When the link is clicked, the user might have to authenticate and when they're finished with the app, they might have to use browser window/navigation controls to continue using the HTML DB app, but that might meet your requirements.
    Scott

  • Drill down report on Oracle R-Enterprise with OBIEE 11g

    Greeting Guru
    I see the demo that OBIEE can use the png graphic file produced by R.
    Is it possible to produce drill down report that way ?
    We are doing statistical analysis and we would like to do a drill down with some of our data visualization results.
    Is there demo/example code ??
    Thanks for the help

    http://www.oracle.com/technetwork/database/options/advanced-analytics/r-enterprise/ore-trng5-operatnlzgrscripts-1501640.…
    The link above shows a graphic generated by R got embedded in OBIEE11g dashboard
    e.g. on presentation p.42 there is a graphic of flight delays by airport.  top 36 busiest airport
    Is it possible that with a double clicks of  JFK, it opens up another reports that is related to JFK let say group it by different airline provider of group by different flight destination for the delay reports.

  • DRILL DOWN FROM GL INTO AP, AR, PO & INV SUBLEDGERS FROM ORACLE DISCOVERER

    Hi,
    One of the key functionality , We are looking for ability to query / Drill down from GL into AP, AR, PO & Inv Subledgers from Oracle Discoverer in the Oracle Applications. We are trying to create workbook that will allow users to see summary of GL Balances, then the ability to retrieve transaction details from subledgers via GL. It looks like this is not possible using seeded folders from seeded business area in the applications EUL. It looks like we need to create custom folders to get these sort of reports.
    Can this be done using seeded EUL? If yes, Can you please let me know the process and steps involved.
    Incase of custom folders, Could you please let me know what are the main tables/views involved for retrieving transactional detail from subledgers like AP, AR, PO & INv via a GL query and relations from the custom folders to Journal Entries and Journal Lines folders.
    I highly appreciate your advice on this subject. if anyone has Business Areas and worksheets already constructed that they could send me this would be most welcomed.
    Thanks in advance for all your help.
    Regards,
    Venkanna

    Hi
    With my little knowledge in Discoverer, I feel this is highly cumbersome process from the EUL to create drilldown to Subledgers using Discoverer 4i.You may have to create and Link several tables and views to get the same.
    The Standard drilldown functionality in Oracle works with GL_SL_LINK_ID and Reference columns populated in GL_JE_HEADERS and GL_JE LINES to link the GL Journals to Supplier Payment, Invoice, Inventory Receipt to PO and similarly for other modules.
    Hope this helps
    Regards
    Sivakumar

Maybe you are looking for