Oracle BI Publisher

I build a matrix report in oracle BI publisher(rtf) it generate the output. While it published in oracle apps this rtf then it raise warning before template run successfully after rtf template it generate XML but did not show the output where the matrix design

Manyam,
check the Getting Started Oracle By Example for the first steps:
http://www.oracle.com/technology/obe/obe_bi/bipub/intro/gettingstarted.htm
Regards
Rainer

Similar Messages

While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट. Word file generated of the same report have correct hindi इ matra positi

While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट. Word file generated of the same report have correct hindi इ matra position and also pdf generated from this word file also contains the same.

Unable to Find "Oracle BI Publisher" menu in MS-WORD

Hi,
I have de-installed oracle bi publisher desktop and re-installed it, i could find the "Insert,Data,Preview" toolbar but couldnot get Oracle BI Publisher menu near help menu in MS-WORD.
I am using MS-WORD 2003 and have tried re-installing but no luck.
Regards,
Sreekanth.

Hi, got the answer from the following thread:
http://forums.oracle.com/forums/thread.jspa?messageID=4125595&tstart=0
Thanks,
Sreekanth.

How to print Barcode data in Oracle XML Publisher Report

Hi,
We have an rdf report which prints Bar code in the starting page based on a custom procedure from MarkView. It works well with Oracle Reports.
But since the current report was a matrix report, we are changing it to a Linear report through Oracle XML Publisher Report.
We have all the things possible in the new Oracle XML Report.. But we are unable to print the Bar code data which is BLOB in the XML Report..
Can anyone help me on this? We have UAT dates around the corner..
We have an RTF Template .
Help asap.
Thanks
Abhilash

Hi Abhishek,
Bar code Registration Steps in XMLPublisher responsibility:
1.    Go to responsibility XML Publisher Administrator
2.    Open Administration
3.    Open Font Files Tab
4.    Create Font File
5.    Give Font Name : XX_BARCODE
6.    File : Browse Barcode file
7.    Apply
8.    Go to Font mapping Tab
9.    Open Create Font Mapping Set
10.    Give Mapping Name: XX_BARCODE
11.    Give Mapping Code: XX_BARCODE
12.    Type : FO TO PDF
13.    Apply
14.    Open Tab Create Font Maping
15.    Font Family: Code39-Digits(This name should be exactly the font name comes in word)
16.    Style: Normal
17.    Weight: Normal
18.    Target Font Type: Truetype
19.    Continue
20.    Font : XX_BARCODE
21.    Apply
1.    Go to Template Tab
2.    Query for your template
3.    Open Edit Configuration
4.    Click on FO Processing
5.    In Font Mapping set Give XX_BARCODE
RTF Template (word):
1.Design the RTF template
2.Insert the barcode against reqd field
3.Make sure to put an * before and after the barcode so that scanner understands the beginning and end
Please send your rtf ,xml file if you are still facing issues.
Rgds,

Not able to use more than 5 data labels for chart in Oracle BI Publisher

I am currently working in Oracle BI Publisher 10.1.3.4.1 .
I created data template and rtf template.Uploaded data successfully and was able to generate a chart also.
But now the problem is that my output is having 14 columns and BI publisher chart is giving only 5 data labels to include.Please let me know how i can add more data labels to be included in the chart.
Im trying with Bar-Vertical-Stacked chart.

Inorder to add more labels using corresponding tags
<RowLabels>
<label>
<xsl:value-of select="element name"/>
</label>
</RowLabels>
<ColLabels>
<label>
<xsl:value-of select="element name"/>
</label>
</ColLabels>
To Know more follow the link
http://www.oracle.com/technetwork/middleware/reports/graph-dtd-technote-2-094743.html#LocalGridData
Thanks
Shyam

How call procedure or package from Oracle BI Publisher 10.1.3.2.1

Hi Gurus,
I need to call a procedure or package from Oracle BI Publisher 10.1.3.2.1 by passing parameters, I do it because it would be easier to fill a table as the report that asks for is too complex (8 breaks, 5 dblinks, 20 tables, etc).
I'm not using the Oracle XML. Review include the following solutions:
Re: Stored procedures and dynamic columns
Re: Is it possible to use Stored Procedures in BI Publisher GUI?
Re: PL/SQL Stored Procedure w/ XML Template?
But none of them useful for me was the level of complexity.
Best regards.

Hi Vetsrini,
I write the sentence as it showed in the previous thread
select from whc_kk_v2.whc_p_kk_publisher (pv_msgerror =>: msgerror,*
pv_pro1 =>: prov_1,
pv_pro2 =>: prov_2)
run when I get the error BIP
ORA-00933: SQL command not properly ended
Show me I'm doing wrong, or who may be causing the error. I tried everything but does not leave, please your help.
Best regards

Oracle bi publisher report for apex

I am trying to generate rtf word file report and picture is not coming in word.
I am using Oracle BI Publisher to generate report.

Can you post a small example up on Oracle's hosted website, that shows what you are trying to do? Just a small sample with a report and your rtf template associated with it.
Post the login information in this thread and I will take a look at what you are trying to do..
Thank you,
Tony Miller
Webster, TX

How to validate the input parameters in Oracle BI Publisher reports

Hi
i am new to Oracle BI Publisher
I am using OBI for generating simple reports.
here i need validation for input parameters (Date Parameter) and also want to disable the Date filed so that user can select through the calendar component.
Here validation in the sense, the system must validate the date and alert the user with an appropriate message
Can anyone please provide me the solution in detail.
Thanks in advance
Edited by: user10185520 on Aug 26, 2008 6:15 AM

I have the same task to validate input parameters with Oracle BI Publisher 5.6.3 running under Oracle eBS 10.5.10.2. My validation goes beyond of what I can do during parameter registration. I am using Data Templates.
My first logical place was the before report trigger. So, I built a report trigger which returns 'false' in case the parameters are not proper. Guess what... XMLP just returns a hard-coded message
!!Error : trigger '" + datatrigger.getName() + "' returns status as 'false'
First of all, this is a bad style to hardcode messages visible by the user (especially during French implementation). Second of all, it is not informative at all. It would be nice to change oracle.apps.xdo.dataengine.XMLPGEN.executeTrigger() to read, for example, a message from the message stack when the trigger returns 'false' and let the user read it.
Anyway, what I did was I built a special data group, decalred before any other data group, query like
select my_package.my_validation fro dual
If parameters fail the validation my PL/SQL package throws an application exception with a message. At least, in this case the error message gets available as the description of the concurrent request.
I wish the before report trigger worked!!!

How to stop a Scheduler Job in Oracle BI Publisher 10g

Hello!
Can someone tell me how can I stop a scheduler job in Oracle BI Publisher 10g?
I scheduled a bursting job to run a report but is running during two days.
I would like to stop it.
Thanks.
Edited by: SFONS on 19-Jan-2012 07:16

Unfortunately there is no way to stop a job once it is being executed. Yes as you read, it is not possible once job has started.
Same thing applies for running queries.
Once queries are sent to the DB BIP loses control over them. The message you see (if any) "Click Here to Cancel" does not stop any query
it is just a message.
I guess you will have to stop/kill the process in your DB
regards
Jorge
p.s If you consider your question answered then please mark my answer as *"Correct"* or *"Helpful"*

Japanese Characters in Oracle BI Publisher

We are using Oracle BI Publisher(10.1.3.4). We have a report in Japanese. The output of the report is in HTML and is getting displayed properly. When we send it as a mail using either schedule button or send button, the japanese text is not getting displayed properly. It is showing like
å®šæœŸå•¥å ´æ¤œæŸ»ã¯ã€ä»Šå›žã®å•¥å >´æ¤œæŸ»ã®ç´„1å¹´å¾Œã«å®Ÿæ–½ã„ãŸã—ã¾ã™
If someone has dealt with this earlier, kindly help. The encoding used is UTF-8(Unicode). It works fine for Spanish and Portuguese but not for Japanese.
Edited by: 975903 on Dec 11, 2012 1:56 AM

see link
https://blogs.oracle.com/BIDeveloper/entry/non-english_characters_appears

How to configure JDBC connection in oracle BI publisher with teradata datab

Hi,
I am going to use Oracle BI publisher to create report.
Our database is Teradata.
How to create database connection for Teradata in BI publisher.
How to create JDBC connection.
What should be the Database Driver Class?
What should be the connection string format?
Please provide me the suggetion.
Thanks,
Santanu Manna

Hi;
I suggest please refer below which could be helpful on your issue:
How To Generate XML Output (Excel, HTML, PDF) for FSG Reports [ID 804913.1]
E-XMLP: BI Publisher Report RTF Template to Excel output is not same as PDF,RTF or HTML format.[Article ID 1515711.1]
BI Publisher Enterprise Excel Output File Size is Too Large [ID 1271544.1]
Regard
Helios

Error while trying to Log In to Oracle BI Publisher through Microsoft Word

Hi:
I get a runtime error when I try to log in to Oracle BI Publisher through MS Word. It says - "File or assembly name XDOUtilities, or one of its dependencies, was not found."
Please help.
OBIEE Version 10.1.3.2
BI Publisher Version 10.1.3.2

Hi,
Check your Deployments with in weblogic Admin console.
Might one of your App might get into failed state or prepared state.
If it is prepared state then make it active and try to access your App again.
Regards,
kal

Oracle BI Publisher - Passing multiple wildcard search to a bind variable

Hi,
Please help me in resolving the below mentioned issue:
I have developed a report in oracle BI Publisher with a SQL query.
While scheduling the report to run I used to pass mutilple parameters like CGAMSVC08,RLCSVC51
If the pass the parameter with wildcard search like C% it works.
When I pass two or more parameter values with wildcard search like C%,R% its not working.
Could you please let me know how should I give the bind variable in the SQL query. Currently I'm paramater like the one shown below for passing multiple paramaters:
Where (',' || :PRMRETRID || ',' like '%,'||RL.RETROFIT_ID|| ',%')
Edited by: user1101445 on May 23, 2012 2:02 AM

HI Tyler.
Well, here's the latest.
I found this little gem in the BIEE 10.1.3.3.3 Release Notes Documentation...
This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, and 10.1.3.3.3.
Reports that use the BI Publisher data template as the data model may fail with the
following error: "Data not defined."
This error will occur if you defined a parameter in your data template but you do not
pass a value to it via the user interface. If you do not specify this parameter in the "Parameters" section of the report definition that you created using the BI Publisher Edit Report interface, then you will receive the error.
To work around this issue, either define the parameter in the Edit Report interface or remove the parameter from the data template.
That bit is now working.
Having set this up and using your guide it works if my SOAP parameters declaration passes a single value like this...
<parameterNameValues>
<item>
<name>P_INVOICE_ID</name>
<multiValuesAllowed>true</multiValuesAllowed>
<values>
<item>16641</item>
</values>
</item>
</parameterNameValues>
But if I try and pass two or more like this...
<parameterNameValues>
<item>
<name>P_INVOICE_ID</name>
<multiValuesAllowed>true</multiValuesAllowed>
<values>
<item>16641,18421</item>
</values>
</item>
</parameterNameValues>
BIP states "java.sql.SQLException: ORA-01722: invalid number"
My SQL where clause is..
<sqlStatement name="Q1">
<![CDATA[select * from vw_invoice_summary
where invoice_summary_id IN (:P_INVOICE_ID)]]>
</sqlStatement>
And the BIP error records the parameter value as P_INVOICE_ID 16641,18421 (which are legit invoice IDs)
In summary, works if I pass one invoice ID, fails if I pass two or more.
Any ideas? Or do you reckon this is now a post for the BIP forum?
Kind regards.
Simon

Report server url to use Oracle BI publisher desktop

Hi,
I have installed Oracle 10g database and Oracle 10g developer suite.
I want to learn to use Oracle BI publisher for making reports.
Today i have installed Oracle BI publisher desktop for making reports in ms-word 2007. when i try to log on in BI Publisher option in ms-word. It ask for username, password & report server.
In my system having java environment and OC4J with Oracle 10g developer suite.
Should i need to installed the BI Publisher Server to fill up the report server url details?
please advice.
Thanks.
Edited by: 968895 on Apr 3, 2013 9:12 PM

Take a look at data templates. You can use the "BeforeReportTrigger" option using a PL/Sql function to accomplish this. Look at the Report Designers guide for information about datatemplates.
Thanks,
Bipuser

Validation of input parameters in Oracle BI Publisher reports

Hi
I am new to Oracle Bi Publisher.
In my project i am using oracle BIPfor generating simple reports.
here i need validation for input parameters (Date field) and i want to make it (Date field) disable, so that user can select the date through the Calendar component only.
Can anyone please provide me the solution in detail, it is urgent.

I have the same task to validate input parameters with Oracle BI Publisher 5.6.3 running under Oracle eBS 10.5.10.2. My validation goes beyond of what I can do during parameter registration. I am using Data Templates.
My first logical place was the before report trigger. So, I built a report trigger which returns 'false' in case the parameters are not proper. Guess what... XMLP just returns a hard-coded message
!!Error : trigger '" + datatrigger.getName() + "' returns status as 'false'
First of all, this is a bad style to hardcode messages visible by the user (especially during French implementation). Second of all, it is not informative at all. It would be nice to change oracle.apps.xdo.dataengine.XMLPGEN.executeTrigger() to read, for example, a message from the message stack when the trigger returns 'false' and let the user read it.
Anyway, what I did was I built a special data group, decalred before any other data group, query like
select my_package.my_validation fro dual
If parameters fail the validation my PL/SQL package throws an application exception with a message. At least, in this case the error message gets available as the description of the concurrent request.
I wish the before report trigger worked!!!

Oracle BI Publisher

Similar Messages

Maybe you are looking for