Oracle database 10.2.0.2 x86 installation error

Dear Oracle DB expert,
i am not sure it has been answer before, as I have tried to search from historical question in this forum but could not have answer. The question is I have a testing database server, I have follow all the step from preparation to start installation. The installation database went well from checking to copy all file but fail at linking stage: The error is :
Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'
When I check the log the error for further infor is "
INFO : genclntsh: Failed to link libclntsh.so.10.1
INFO : *** Error code 1
My environtment are :
O/S windows 7 proffesional 32 bit
Oracle VirtualBox
Solaris 10 32-bit i386 kernel
Oracle db : 10202_database_solx86
I am not sure about the problem above, when I tried to get the answer from google some of them mention related with the not match between O/S with Oracle database. Is it because 10202_database_solx86 is for 64 bit? So the installation could not be happened?
Or I have missed some steps of installation therefore get those errors?
Please give me assistant on this matter about the problem I have. I am planning to move to Solaris 64 bit environtment but I could not affort to buy test environtment for 64 bit at the moment.
Thanks and Regards,
Buz

Hi Helios,
I have installed from the scratchs again from O/S to database and follow Database documentation that also ask the installer to look further:
at /u01/app/oracle/product/10.2.0/db_1/install/make.log. And based on that log file here is the log it seems the problem at ntcontab.o etc: detail below;
fatal: symbol 'ntcontab' in file /u01/app/oracle/product/10.2.0/db_1/lib/lib
n10.a(ntcontab.o): section [3].data: size 0x60: symbol (address 0, size 0x70) li
es outside of containing section
ld: fatal: file processing errors. No output written to /u01/app/oracle/product/
10.2.0/db_1/lib/libclntsh.so.10.1
genclntsh: Failed to link libclntsh.so.10.1
*** Error code 1
Do you know what mean of this please assist me on this problem so I could fix it.
Thank you Helios,
Rgds, Buz

Similar Messages

Oracle Database 10g Express Edition Beta 2 Installation

Oracle Database 10g Express Edition Beta 2 Release for Microsoft Windows installation successful, no problems.

Hi Rekha,
The format mask 999G999G999G999G990D0000 is the format mask that I selected from the software itself. I also use this format mask for a single record update. If' s ok, no error, but with tabular form with multiple record update, it shows error .I also changed the decimal point to two digits ,select from software pop-up window (this was tested in the workspace provide by Oracle). It still shows error. Last test I put the space like 1 111,111.00 in a single record update it shows error (but if I put 1 in front of 111,111 without space it's ok-no space before). My point is from user point of view.In the first time user input 100000 the software accept it. Opp! it has to be 1100000. The user comes back after submit and put 1 without comma.It shows error (in tabular form with multiple record update not in single row update). While in the first time the user do not to key any comma at all. This may makes some confuses both the users and the developers which had to check error by adding program to checking some where in Page Processing or Page Rendering.
Thanks
Tritep

Oracle Database Express Edition 11g r2 win_32bit installer

hello frnds ,I installed oracle database express edition 11.2 r2 release and during the installation I faced this problem .plz help me out give your suggestions.
The installer is unable to instantiate the file c:\Users\Sanjeev\AppData\Local\Temp\{1A2BC859-9070-483E-BC9D-A24D29920FDF}\KEY_XE.reg .The file does not appear to exist.

Pl post OS details. Pl review previous threads on this topic
https://forums.oracle.com/search.jspa?view=content&resultTypes=&dateRange=all&q=KEY_XE.reg&rankBy=relevance&contentType=…
Are you heeding and following all of the instructions in the fine Install Guide ?
HTH
Srini

Connect to Oracle database from Perl on Solaris x86

Hi,
How can I connect to Oracle database using Perl scripts on Solaris x86. It seems that DBD-Oracle Perl module requires Oracle client installed to work. Is there any Oracle client available for Solaris x86? Any one got a workaround? Thanks.
Angus Lee

Yes, you absolutely must have some portions of the rdbms installed before you can proceed. If your Solaris x86 machine is only a client, then you can get away with installing just ?/rdbms/mesg and ?/rdbms/lib.
I have Oracle 7.3.4, 8.0.5, 8.0.6, and 8.1.6 for Intel Solaris 2.6. I don't know if they'll run on Solaris 8 or 9 but I'm trying to upgrade at this very moment. As long as you conform to Oracle developer license, then you may download them from my machine.
I believe the reason Oracle dropped their Intel Solaris port is probably because Sun went through a period where they themselves dropped their Intel port. They've picked back up and if enough Oracle on Intel Solaris customers scream, then Oracle might pick it back up again too.
Send me an email if you're interested in the downloads.

Oracle Application server 10.1.3.1 Installation error

I am facing a problem while installing OAS 10.1.3.1,
i can't able to move forward, its showing copying files for HTTP server files 1.3.31.0.0 and copying 'owm-3_0.jar' and not moving....
Please look at the below log and please suggest the alternative to resolve this.......
after clicking install in the last its showing in log like-
"Starting install Install Phase 1 of component HTTP Server Files
Calling Query globalVarQueries2.1.0.4.1 getGlobalVariable
variable = oracle.calypso.configured
Query Exception: VariableNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
false
Setting variable 's_webCacheInstalling' to 'false'. Received the value from a code block.
Calling Query globalVarQueries2.1.0.4.1 setGlobalVariable
variable = oracle.apache.serverRoot
value = /lvidmu01apps/app/oracle/Apache/Apache
Query Returned: true
Calling Query globalVarQueries2.1.0.4.1 getGlobalVariable
variable = oracle.iappserver.http_listen_sslmode
Query Exception: VariableNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
false
Calling Query globalVarQueries2.1.0.4.1 getGlobalVariable
variable = oracle.as.midtier
Query Returned: true
Setting variable 's_ASMidtier' to 'true'. Received the value from a code block.
Calling Query globalVarQueries2.1.0.4.1 getGlobalVariable
variable = oracle.apache.standalone
Query Exception: VariableNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
false
Calling Query areasQueries10.1.0.4.0 getAllOracleHomes
Query Returned: /lvidmu01apps/app/oracle,
Calling Query portQueries2.1.0.17.7 getFreeApachePort
lowerPortNumber = 7777
upperPortNumber = 7877
oracleHomes = /lvidmu01apps/app/oracle,
currentOracleHome = /lvidmu01apps/app/oracle
portName = Oracle HTTP Server port"

Hi - I'm also facing the same issue. were you able to reslove the issue.
Any help would be really great.
Thanks,
Yudhvir Singh

Oracle 10g Express Edition Installation Error

I have downloaded 10g Express Edition and am trying to install. After clicking on the OracleXE.exe file, I get the following error:
Error applying transforms. Verify that the specified transform paths are valid. C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
I have verified that the path and file exists. What else should I do?

Here is the Ipconfig settings:
ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : jfunk
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : Yes
Ethernet adapter Local Area Connection 11:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.100.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection 5:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com 3C920 Integrated Fast Ethernet
Controller (3C905C-TX Compatible) #4
Physical Address. . . . . . . . . : 00-08-74-48-AE-AB
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.5
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 200.105.128.40
200.105.128.41
C:\Documents and Settings\funk>
No luck in changing the Temp environment setting. Here is the latest log.
=== Verbose logging started: 8/22/2007 16:55:24 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: c:\PROGRA~1\COMMON~1\INSTAL~1\Driver\11\INTEL3~1\IDriver.exe ===
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'c:\temp\_is5F\Oracle Database 10g Express Edition.msi' against software restriction policy
MSI (c) (10:B8) [16:55:24:765]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\Oracle Database 10g Express Edition.msi is not digitally signed
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\Oracle Database 10g Express Edition.msi is permitted to run at the 'unrestricted' authorization level.
MSI (c) (10:B8) [16:55:24:775]: Cloaking enabled.
MSI (c) (10:B8) [16:55:24:775]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (10:B8) [16:55:24:775]: End dialog not enabled
MSI (c) (10:B8) [16:55:24:775]: Original package ==>
MSI (c) (10:B8) [16:55:24:775]: Package we're running from ==> c:\temp\_is5F\Oracle Database 10g Express Edition.msi
MSI (c) (10:B8) [16:55:24:775]: Transforming table Property.
MSI (c) (10:B8) [16:55:24:775]: APPCOMPAT: looking for appcompat database entry with ProductCode '{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}'.
MSI (c) (10:B8) [16:55:24:775]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (10:B8) [16:55:24:775]: MSCOREE not loaded loading copy from system32
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
MSI (c) (10:B8) [16:55:24:785]: Unable to create a temp copy of transform 'C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST'.
MSI (c) (10:B8) [16:55:24:785]: Note: 1: 2203 2: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST 3: -2147287037
MSI (c) (10:B8) [16:55:24:785]: Couldn't find cached transform C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST. Looking for it at the source.
MSI (c) (10:B8) [16:55:24:785]: Resolving source.
MSI (c) (10:B8) [16:55:24:785]: Resolving source to launched-from source.
MSI (c) (10:B8) [16:55:24:785]: Setting launched-from source as last-used.
MSI (c) (10:B8) [16:55:24:785]: SOURCEDIR ==> c:\temp\_is5F\
MSI (c) (10:B8) [16:55:24:785]: SOURCEDIR product ==> {F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
MSI (c) (10:B8) [16:55:24:785]: Unable to create a temp copy of transform 'C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST'.
MSI (c) (10:B8) [16:55:24:785]: Note: 1: 2203 2: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST 3: -2147287037
MSI (c) (10:B8) [16:55:24:785]: Couldn't find cached transform C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST. Looking for it at the source.
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:795]: Original transform ==> c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:795]: Transform we're running from ==> C:\temp\5d536d5.mst
MSI (c) (10:B8) [16:55:24:795]: Found missing cached transform c:\temp\_is5F\1033.MST. Adding it to re-cache list.
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: Verifying transform --> 'c:\temp\_is5F\1033.MST' against software restriction policy
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\1033.MST is not digitally signed
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\1033.MST is permitted to run at the 'unrestricted' authorization level.
MSI (c) (10:B8) [16:55:24:795]: Validating transform 'C:\temp\5d536d5.mst' with validation bits 0
MSI (c) (10:B8) [16:55:24:795]: Transform 'C:\temp\5d536d5.mst' is valid.
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: PatchPackage 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Media 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: PatchPackage 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: TRANSFORM: 'PatchPackage' table is missing or empty. No pre-transform fixup necessary.
MSI (c) (10:B8) [16:55:24:795]: TRANSFORM: Applying regular transform to database.
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: ActionText 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: AdminExecuteSequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: Condition 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdminUISequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdvtExecuteSequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdvtUISequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AppId 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AppSearch 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2251 2: c:\temp\_is5F\Oracle Database 10g Express Edition.msi 3: Property
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
DEBUG: Error 2251: Database: c:\temp\_is5F\Oracle Database 10g Express Edition.msi Transform: Cannot delete row that doesn't exist. Table: Property
1: 2251 2: c:\temp\_is5F\Oracle Database 10g Express Edition.msi 3: Property
Error applying transforms. Verify that the specified transform paths are valid.
c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 1708
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
MSI (c) (10:B8) [16:55:24:805]: Product: Oracle Database 10g Express Edition -- Installation failed.
MSI (c) (10:B8) [16:55:24:805]: Attempting to delete file C:\temp\5d536d5.mst
MSI (c) (10:B8) [16:55:24:805]: Unable to delete the file. LastError = 32
=== Verbose logging stopped: 8/22/2007 16:55:24 ===
I am on my last attempt here if there are no other concrete solutions. Guess I will have to wait for 11g to make it to the Windows environment. Any other previous version of 10g that I can try????

Two Oracle databases on one AIX Server - Note working, Pls Help

Dear Friends,
I have installed Two SAP systems with Two Oracle Databases on one AIX machine, The Installation of both the systems went fine without any errors, and also i have been able to login to both the systems seperately. (that means i cant start both the systems at a time, its one at a time)
But the problem is of the Oracle Listener, i am not able to start both the systems with single Oracle Listener processes(tnslistener). I tried all the possible scenarios as mentioned in note 98252 but nothing seems to be of any use so far.
the thing is i can start either one of the SAP Systems, But my objective is to start both the SAP Systems with one listener processes (LISTENER) and one listener port (1527)
Or
you can say i am also ready to keep two different listeners for TWO seperate Oracle databases, I tried doing so as per one of the sap notes in which you have to keep different names of listener and different numbers for listener port for second ORACLE database. I tried doing exactly mentioned in the note but yet unsuccessful...
Now i am completely lost as what is to be done since its critical i want you to immediately look into it and suggest me the appropriate solution so that i can set up both of my DEVELOPMENT and QUALITY system running...
To troubleshoot this if you require anything from my side then please feel free to ask me since our functional consultants have to soon start working on the SAP systems.
Regards
Ayush

The note you specified talk about 2 database instances not 2 databases... (I was starting to wonder how you deploy 2 databases), you can have multiple database instances on a DB. The note also give you detailed explanation of the configuration of listener.ora
Now, if this is the case and you have installed 2 instances (not databases) on the same host and configured the listener according to the note, then you should be able to call R3trans -d from both SID's.. if the R3trans fails please post the contents of trans.log here.
the thing is i can start either one of the SAP Systems, But my objective is to start both the SAP Systems with one listener processes (LISTENER) and one listener port (1527)
Then, the configuration of your listener.ora file must be incorrect.
Regards
Juan

How to create the oracle database for MDM

Hello Friends,
I am new to MDM technology. I have been asked to install MDM 5.5 on windows with oracle database.
i have gone through the installation guides and master guide of MDM. But in the installation the procedure is not given to create the data base after oracle installation. i want to know do i need to create the database manually if yes then what should be the DBSID of the database and schema name etc.
Please help.
Thanks,
Manoj

Well, let's rock.
Oracle database creation
Use Oracle Database Configuration Assistant (Start -> Programs -> ...) to create a new database.
The database naming (on Step 3) is up to you. I used MDM as for SID and MDM.<MYHOSTNAME>.<MYDOMAIN> as for the db name.
Be sure you select UTF8 for the character set (on Step 12) - this requirement is mentioned in the SAP MDM Installation Guide.
All other settings can go default.
Listener and TNS name configuration
The next step is to configure a listener and tns name for your database.
Run the Oracle Net Configuration Assistance and select the "Listener configuration". Default settings on the wizard pages should suite your configuration.
Click Finish.
Run the Oracle Net Configuration Assistance again and select the "Local Service Name configuration". Add one. Choose the name of the database for the service name. It was MDM.<MYHOSTNAME>.<MYDOMAIN> for me.
Ensure that you use name of the database that you've entered during the database creation.
Everything else should go as suggested by default.
Once you are at the Test stage of the wizard and get the "invalid login/password" message, clisk "Change login" and use SYSTEM user and the password you\ve entered during databae creation.
After the test passes, you can connect to your Oracle database through the MDM Console.
Please, let me know if you have any questions, I'll help.
Thanks!

Error while pulling data from an Oracle database. ORA-01858: a non-numeric character was found where a numeric was expected

I'm trying to pull data from an Oracle database using SSIS. When I try to select a few fields from the source table, it returns the following error message:
 [OLE DB Source [47]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
 An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E14 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
 An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
The source columns are a combination of numeric and texts, and I've also tried selecting one of them, which didn't work. I'm using the Oracle client 11.2.0.1, and it works fine with any other data sources I have connected to so far. How can I resolve this
error?

Hi H.James,
According to your description, the issue is a non-numeric character was found where a numeric was expected while pulling data from an Oracle database in SSIS.
Based on the error message, the issue should be you are comparing a number column to a non-number column in a query. Such as the query below (ConfID is a number, Sdate is a date):
where C.ConfID in (select C.Sdate
 from Conference_C C
 where C.Sdate < '1-July-12')
Besides, a default behavior for the Oracle OleDb Provider that change the NLS Date Format of the session to 'YYYY-MM-DD HH24:MI:SS can also cause the issue. For more details about this issue, please refer to the following blog:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2012/01/20/every-bug-is-a-microsoft-bug-until-proven-otherwise.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Errors while installind Oracle Database 11gR2

At the step "Oracle Database Configuration Assistant i got the following error: link
And i don't know why, and what to do. Can you help me?
Thanks!
Edited by: Roger22 on 14.07.2010 20:25

Wed Jul 14 20:38:54 2010
AUD: OS Error = 1502 encountered while writing audit record
AUD: OS Error = 1502 encountered while writing audit record
Starting ORACLE instance (normal)
Wed Jul 14 20:39:13 2010
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as D:\oracle\product\11.2.0\dbhome_1\RDBMS
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in client-side pfile D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ADMIN\ORCL\PFILE\INIT.ORA on machine ROGER
System parameters with non-default values:
processes                = 150
nls_language             = "ROMANIAN"
nls_territory            = "ROMANIA"
memory_target            = 816M
control_files            = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL01.CTL"
control_files            = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL02.CTL"
db_block_size            = 8192
compatible               = "11.2.0.0.0"
undo_tablespace          = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain                = ""
dispatchers              = "(PROTOCOL=TCP) (SERVICE=orclXDB)"
audit_file_dest          = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ADMIN\ORCL\ADUMP"
audit_trail              = "DB"
db_name                  = "orcl"
open_cursors             = 300
diagnostic_dest          = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN"
Wed Jul 14 20:39:18 2010
PMON started with pid=2, OS id=5252
Wed Jul 14 20:39:18 2010
VKTM started with pid=3, OS id=4052 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Wed Jul 14 20:39:18 2010
GEN0 started with pid=4, OS id=4392
Wed Jul 14 20:39:18 2010
DIAG started with pid=5, OS id=4924
Wed Jul 14 20:39:18 2010
DBRM started with pid=6, OS id=5692
Wed Jul 14 20:39:18 2010
PSP0 started with pid=7, OS id=5120
Wed Jul 14 20:39:18 2010
DIA0 started with pid=8, OS id=3532
Wed Jul 14 20:39:19 2010
MMAN started with pid=9, OS id=4196
Wed Jul 14 20:39:19 2010
DBW0 started with pid=10, OS id=504
Wed Jul 14 20:39:19 2010
LGWR started with pid=11, OS id=1252
Wed Jul 14 20:39:19 2010
CKPT started with pid=12, OS id=3776
Wed Jul 14 20:39:19 2010
SMON started with pid=13, OS id=5408
Wed Jul 14 20:39:19 2010
RECO started with pid=14, OS id=4776
Wed Jul 14 20:39:19 2010
MMON started with pid=15, OS id=4980
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Wed Jul 14 20:39:19 2010
MMNL started with pid=16, OS id=752
starting up 1 shared server(s) ...
ORACLE_BASE from environment = D:\oracle\product\11.2.0\app\Sorin
Wed Jul 14 20:39:19 2010
AUD: OS Error = 1502 encountered while writing audit record
Wed Jul 14 20:43:13 2010
AUD: OS Error = 1502 encountered while writing audit record
AUD: OS Error = 1502 encountered while writing audit record
Wed Jul 14 20:48:34 2010
alter database open
ORA-1507 signalled during: alter database open...
alter database mount
Wed Jul 14 20:48:41 2010
ORA-00210: nu se poate deschide fisierul de control specificat
ORA-00202: fisier de control: 'D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL02.CTL'
ORA-27041: fisierul nu a putut fi deschis
OSD-04002: fişierul nu a putut fi deschis
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00210: nu se poate deschide fisierul de control specificat
ORA-00202: fisier de control: 'D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: fisierul nu a putut fi deschis
OSD-04002: fişierul nu a putut fi deschis
O/S-Error: (OS 2) The system cannot find the file specified.
Wed Jul 14 20:48:43 2010
Checker run found 2 new persistent data failures
ORA-205 signalled during: alter database mount
...This is what that file contains
Roger..

Installation of Oracle Database 10g 10.2.0.3 on Windows 2003 Server

Hi Guys,
We have to install Oracle Database 10g 10.2.0.3 on Windows 2003.
I read on net, metalink and OTN as well and it seems there is no single 10.2.0.3 setup available to do so.
One has to upgrade from earlier version to 10.2.0.3.
Is that so? Is this the only way?
I mean if we want new and fresh 10.2.0.3 then don't we have installer for it?
In this case we will have to install 10.1.0.2 and then upgrade? (we have 10.1.0.2 installable with us)
And if at all that is the only path available then for 10.2.0.3 on Windows 32 bit - Patchset 5337014 i.e. p5337014_10203_WINNT.ZIP from metalink is the correct patch?
Thanks in advance!
Av.

Hi guys,
I donwloaded patchset - 5337014, and in its readme it is specified to download and install patch - 5601428.
So I downloaded 5601428 and set ORACLE_HOME and then fired command -
D:\oracle_pathces\5601428>optach apply
and i got error saying -
This Oracle Home does not have components/versions required by the patch.
ERROR: OPatch failed during pre-reqs check.
Following is the command and its output,
D:\Oracle_Patches\5601428>opatch apply
"set PERL5LIB=D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\lib"
"D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\bin\MSWin32-x86\perl.exe D:\oracle\pro
duct\10.1.0\db_1\OPatch\opatch.pl ..."
OPatch Version 1.0.0.0.48
Perl Version 5.006001
Oracle Home = D:\ORACLE\PRODUCT\10.1.0\DB_1
Location of Oracle Inventory = D:\ORACLE\PRODUCT\10.1.0\DB_1\inventory
Oracle Universal Installer shared library = D:\ORACLE\PRODUCT\10.1.0\DB_1\oui\li
b\win32\oraInstaller.dll
Path to Java = "D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\ORACLE\PRODUCT\10.1.0\DB_
1\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
D:\oracle\product\10.1.0\db_1\OPatch\opatch.pl version: 1.0.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
This Oracle Home does not have components/versions required by the patch.
ERROR: OPatch failed during pre-reqs check.
D:\Oracle_Patches\5601428>
Probably thought that following is the culprit -
Location of Oracle Inventory Pointer = N/A
so fired -
D:\Oracle_Patches\5601428>optach lsinventroy
gave following output -
D:\Oracle_Patches\5601428>opatch lsinventory
"set PERL5LIB=D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\lib"
"D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\bin\MSWin32-x86\perl.exe D:\oracle\pro
duct\10.1.0\db_1\OPatch\opatch.pl ..."
Using ORACLE_HOME/oui to look up oui libs...
Oracle Home = D:\ORACLE\PRODUCT\10.1.0\DB_1
Location of Oracle Inventory = D:\ORACLE\PRODUCT\10.1.0\DB_1\inventory
Oracle Universal Installer shared library = D:\ORACLE\PRODUCT\10.1.0\DB_1\oui\li
b\win32\oraInstaller.dll
Path to Java = "D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\ORACLE\PRODUCT\10.1.0\DB_
1\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
""D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe" -classpath "D:\oracle\prod
uct\10.1.0\db_1\oui\jlib\OraInstaller.jar;D:\oracle\product\10.1.0\db_1\oui\jlib
\srvm.jar;D:\oracle\product\10.1.0\db_1\OPatch\jlib\opatch.jar;D:\oracle\product
\10.1.0\db_1\oui\jlib\xmlparserv2.jar;D:\oracle\product\10.1.0\db_1\oui\jlib\sha
re.jar;." -Dopatch.retry=10 -Dopatch.delay=30 opatch/LsInventory "D:\oracle\pr
oduct\10.1.0\db_1\oui" "d:\oracle\product\10.1.0\db_1" opatch.pl 1.0.0.0.48 FALS
E"
Retrieving inventory.
There is no Interim Patch
D:\oracle\product\10.1.0\db_1\OPatch\opatch.pl version: 1.0.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
OPatch succeeded.
So thought is my opatch the culprit? Its version as seen in above dump is - 1.0.0.0.48, so is that causing any problem? And if yes, then how to get it resolved?
FYI: OS - Win2003, DB - 10.1.0.2.0
Can any one help in this?
Thanks!
Av.

Oracle Database 10g Release 1(10.1.0.3) for Solaris x86

I've downloaded this version of oracle to be installed on solaris x86 for version 5.10 but unfortunatly the following error has occurred:
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.6, 5.7, 5.8 or 5.9. Actual 5.10
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2006-02-15_11-16-32AM/installActions2006-02-15_11-16-32AM.log
so it is failed to install ...
please advise,,
thx alot...

from metalink:
General Notes For Oracle Database - Enterprise Edition On
Solaris Operating System x86:
Sun Solaris OS 10 Information:
o Oracle will announce certification of the following database products on the Sun Solaris 10 operating system shortly after it is announced as being generally available by Sun. This is planned for March 2005.
+ Oracle Database 9iR2 (with 9.2.0.4 Patchset) for Sun Solaris SPARC32
+ Oracle Database 9iR2 (with 9.2.0.5 Patchset) for Sun Solaris SPARC64
+ Oracle Database 10gR1 (with 10.1.0.3 Patchset) for Sun Solaris SPARC64
+ Oracle Database 10gR1 (includes 10.1.0.3 Patchset) for Sun Solaris x86
o When Oracle Database 10gR2 releases on Sun platforms later in 2005, the following releases will be certified on the Sun Solaris 10 operating system:
+ 10gR2 Database for Sun Solaris SPARC64
+ 10gR2 Database for Sun Solaris AMD64
+ 10gR2 Database for Sun Solaris x86
pasquale rago

Problems with installation of Oracle Database 11g, Enterprise edition

I am having trouble with the whole DHCP setting on my windows vista business OS.
I went throught the steps to install a loopback adapter which is supposed to be a solution for DHCP-enabled computers. When I check to see if I have a loopback adapter, it is showing that it is the "local area connection 2."
But at some point during the installation, it says that I need to make the loopback adapter the primary network setting. Is this what is preventing a successful installation? I went through the installation process to the end despite this error message and it seemed to install ok. I created a database using the Database Config Manager. Now I am having trouble accessing this database. Is this related to the error message I described above?
I created a username and password at the database creation page.
When I go into command prompt I type in "sql plus" and then my username and password.
But it says "ORACLE not available."
Any help would be much appreciated.

Don't bother with a loopback adapter unless you are using a laptop that needs Oracle to work whether connected or unconnected to the business network. Much simpler to just arrange for DHCP to assign you a fixed IP address (a lease reservation).
It's the change of IP address which trips Oracle up, not the existence of DHCP. So if you can make sure your IP address will be the same, no matter how you acquire it, that's all you have to do.
Installing a loopback adapter which isn't the primary interface at the point you install Oracle will mean your installation will get very confused as to whether to address things via the 127... address or the "normal" IP address. And yes, at that point, you'll not be able to connect to instances, or run listeners or do all sorts of other things reliably.
If it were me, I'd uninstall the mess you probably now have as far as Oracle goes, install something like VirtualBox (free) or VMware Workstation (costs) and enjoy your Oracle experience inside the confines of a virtual machine whose networking setup you can configure and control to your heart's content, without it screwing up your real machine's ability to connect to your work's network when it needs to.

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Oracle Database 10g relase 1 Installation Problem on RHEL 3 ES

Dear all
I'm trying to install oracle database 10g r1 X86_64 on Intel Xeon Machine with EM64T technology with RHEL 3 ES update 2 X86_64 edition. The problem is described below :
Oracle OUI .runInstaller collapsed with such a following error:
An unexpected exception has been detected in native code outside the
VM.
Unexpected Signal : 11 occurred at PC=0x8077470
Function=[Unknown.]
Library=(N/A)
Is there anyone can help me ??

Check pushitz website and ensure that you have all the required rpms installed properly.
Check the log files in the installation directory. That should give some more details as to what exactly is going on.

Oracle database 10.2.0.2 x86 installation error

Similar Messages

Maybe you are looking for