Oracle database 10g RAC and ASm installation

Hi all,
I want to ask to everybody something about Oracle 10g RAC and ASm configuration. We plan to migrate to Oracle 10g from 9i, and we will begin configuring oracle but we have to decide which configuration are the best.
Our materials are bellow:
Hardware: RP 3440 (HP)
OS : HPUX 11i Ver 1
Storage: EVA 4000 (eva disk group)
The problem is:
Our supplier recommand us to use HP serviguard + HP serviceguard extension for RAC+ RAc and Raw device as configuration.
But we want to use Oracekl Clusterware + RAC + ASM
My question is if anybody know what is the best configuration, we want to use ASm.
Can we use HP serviguard and ASM.
Some documentations or link explain oracle RAC and ASM configuration will be appreciate.
Thanks for your help.
Regards.
raitsarevo

Hi Experts ,
Using this command
$ emca
STARTED EMCA at Mon Mar 09 16:13:13 GMT+07:00 2009
Enter the following information about the database to be configured
Listener port number:
Following error comes:
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/emSDK/conf/InventoryLoader
at oracle.sysman.emcp.EMConfig.getFreePorts(EMConfig.java:4225)
at oracle.sysman.emcp.EMConfig.checkParameters(EMConfig.java:994)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:265)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:692)
at oracle.sysman.emcp.EMConfigAssistant.performSetup(EMConfigAssistant.java:641)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:340)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:180)
Moreover this command does not work on Aix 5.3
emca -config dbcontrol db -repos recreate
Regards,
Edited by: LazyDBA10g on Mar 16, 2009 6:20 AM

Similar Messages

Oracle database 10g RAC and ASM configuration

Hi all,
I want to ask to everybody something about Oracle 10g RAC and ASm configuration. We plan to migrate to Oracle 10g from 9i, and we will begin configuring oracle but we have to decide which configuration are the best.
Our materials are bellow:
Hardware: RP 3440 (HP)
OS : HPUX 11i Ver 1
Storage: EVA 4000 (eva disk group)
The problem is:
Our supplier recommand us to use HP serviguard + HP serviceguard extension for RAC+ RAc and Raw device as configuration.
But we want to use Oracekl Clusterware + RAC + ASM
My question is if anybody know what is the best configuration, we want to use ASm.
Can we use HP serviguard and ASM.
Some documentations or link explain oracle RAC and ASM configuration will be appreciate.
Thanks for your help.
Regards.
raitsarevo

Hello,
there's no extra RAC software package, but the option is only offered, if one of the supported cluster layers for the respective OS has been installed before.
10.1.0.3 looks like a complete redesign, but anyway it is a patch, you have to install 10.1.0.2 first.

Oracle database 10g RAc an ASM configuration

Hi all,
I want to ask to everybody something about Oracle 10g RAC and ASm configuration. We plan to migrate to Oracle 10g from 9i, and we will begin configuring oracle but we have to decide which configuration are the best.
Our materials are bellow:
Hardware: RP 3440 (HP)
OS : HPUX 11i Ver 1
Storage: EVA 4000 (eva disk group)
The problem is:
Our supplier recommand us to use HP serviguard + HP serviceguard extension for RAC+ RAc and Raw device as configuration.
But we want to use Oracekl Clusterware + RAC + ASM
My question is if anybody know what is the best configuration, we want to use ASm.
Can we use HP serviguard and ASM.
Some documentations or link explain oracle RAC and ASM configuration will be appreciate.
Thanks for your help.
Regards.
raitsarevo

Hello,
there's no extra RAC software package, but the option is only offered, if one of the supported cluster layers for the respective OS has been installed before.
10.1.0.3 looks like a complete redesign, but anyway it is a patch, you have to install 10.1.0.2 first.

Solaris 10 and Hitachi LUN mapping with Oracle 10g RAC and ASM?

Hi all,
I am working on an Oracle 10g RAC and ASM installation with Sun E6900 servers attached to a Hitachi SAN for shared storage with Sun Solaris 10 as the server OS. We are using Oracle 10g Release 2 (10.2.0.3) RAC clusterware
for the clustering software and raw devices for shared storage and Veritas VxFs 4.1 filesystem.
My question is this:
How do I map the raw devices and LUNs on the Hitachi SAN to Solaris 10 OS and Oracle 10g RAC ASM?
I am aware that with an Oracle 10g RAC and ASM instance, one needs to configure the ASM instance initialization parameter file to set the asm_diskstring setting to recognize the LUNs that are presented to the host.
I know that Sun Solaris 10 uses /dev/rdsk/CwTxDySz naming convention at the OS level for disks. However, how would I map this to Oracle 10g ASM settings?
I cannot find this critical piece of information ANYWHERE!!!!
Thanks for your help!

You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
Tim
---

Oracle Database 10g - RAC install

1)
I am trying to install Oracle 10g RAC (for Solaris Operating System (SPARC)) using 'Enterprise/Standard Edition for Solaris Operating System (SPARC, 64-bit) - ship_rel10_sol64_db.cpio.gz' downloaded installation. There is no separate installation for RAC, so I assume this is the right install to use for RAC, right?
Since I don't have cabeling for Interconnect done yet, I tried to install Database/RAC prior CRS installation, but no option has been offered for RAC. Do I need to have clustering software installed first in order to be able to installl Oracle Database RAC?
2)
Why is Oracle Database 10g release 10.1.0.3 patch set (for Solaris Operating System (SPARC)) so large - 648 MB?
Do I need to install 10.1.0.2 first?

Hello,
there's no extra RAC software package, but the option is only offered, if one of the supported cluster layers for the respective OS has been installed before.
10.1.0.3 looks like a complete redesign, but anyway it is a patch, you have to install 10.1.0.2 first.

Oracle Database 10g R2, and new topics..

Hi , it's my first time here and don't know from where to download the course on line for preparing
the exam for Oracle Database 10g: Administration I
any body know where i can get it from ?
Thanks a lots,

You can find the Oracle By Example tutorials at the following link;
http://www.oracle.com/technology/obe/start/index.html

Oracle Database 10g XE and PDF files

Hi everyone, I'm a newbie: l'm starting to develop my first Oracle application and l have this (maybe stupid) question: can I store pdf files as data inside Database 10g XE ?
If it's possible witch datatype has to have Column name ?
MANY THANKS

A PDF is considered a Large OBject (LOB). You need to decide whether you want it stored inside the database (BLOB) or stores outside the database (BFILE)
A BLOB can be updated, but counmts towards the 4GB data XE can store.
A BFILE is read-only (actually BFILE is just a pointer to the PDF) but the size of the PDF does not count towards the 4GB.

Oracle Database 11gR2 RAC - Configure ASM Libraries on VM

Folks,
Hello. I am installing Oracle 11gR2 RAC system using 2 Virtual Machines (rac1 and rac2 - Oracle Linux 5.6) on the top of VMPlayer.
I am configuring ASM libraries on rac1 using the command:
[root@rac1 dev]# oracleasm configure -i
But this message comes up:"Command not found."
I cannot find the directory where "oracleasm" is located. Can any folk help to solve the issue ?
Thanks in advance.

I would suggest you to take a look at these guides
http://www.oracle-base.com/articles/11g/Articles11g.php#db11g_release_2_installations
Many of them are installed in virtual machines.

Can i patch oracle database on RAC and not patch the RAC software

Hi there
Kindly advise on implications of doing the following
1 i have oracle cluster version 10.2.0.1.0 running 2 nodes
2 i have database version 10.2.0.1.0
i have 4 different databases
I want to patch only one database
question !!
Can i patch the database to 10.2.0.4 on both nodes with out patching the cluster software ?
I' m doing this in order to fix a bug that is messing the live Db
Is That possible
Please answer
Thanks
Francis

Can i patch the database to 10.2.0.4 on both nodes with out patching the cluster software ? Can you? yes
Should you? NO

Oracle database 10G R2 and apache?

I just downloaded 10gr2 for windows. I didn't find apache with it.
Do you have any ideas?
Thanks,
Eric

Are you looking for a stand-alone Apache download? Apache should be installed to handle various Oracle functions, but it's not a stand-alone Apache install.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Running Oracle database 10g and 11g on same 5 RAC nodes

Hello Gurus,
Could any body throw light if I can install and sucessfully run Oracle database 10g and 11g on the same Oracle RAC installation setup.My setup is below
Number of nodes-5
OS- windows 2003 or RHEL5
storage- DELL EMC SAN
Clusterware- oracle version11g
File system-Automatic storage management(ASM)
After I successfully setup clusterware,ASM on the nodes,I would want to install 11g database on all 5 nodes .
Then Install 10g database on only 3 of the nodes using the same clusterware.
What are your views on the same.
Also FYI... as per metalink node 220970.1(RAC: Frequently Asked Questions) one can do such a setup.
what iam looking for is practical experience if anyone has implemented this in production system,if yes any issues faced and how tough it is to support.
Thanks,
Imtiyaz

You could run an 11g database and 10g database on the same cluster as long as you use Clusterware 11g.
The administration aspect will drastically change according to the platform you run on. As of now, it appears you don't know whether it will be Linux or Windows.
It would be practical to support the same database release.

Oracle Database 10g relase 1 Installation Problem on RHEL 3 ES

Dear all
I'm trying to install oracle database 10g r1 X86_64 on Intel Xeon Machine with EM64T technology with RHEL 3 ES update 2 X86_64 edition. The problem is described below :
Oracle OUI .runInstaller collapsed with such a following error:
An unexpected exception has been detected in native code outside the
VM.
Unexpected Signal : 11 occurred at PC=0x8077470
Function=[Unknown.]
Library=(N/A)
Is there anyone can help me ??

Check pushitz website and ensure that you have all the required rpms installed properly.
Check the log files in the installation directory. That should give some more details as to what exactly is going on.

Unable to continue Oracle Database 10g R2 installation on IBM AIX 5.3L

I am facing some difficulties in installing the above. My environment is as follows:
Server is a IBM system P, OS is AIX 5.3L and oracle version is Oracle Database 10g R2 (10.2).
I encounter my problem when asked to changed/edit the shell script when changing oracle users. I can't find the % vi .login file. And I'm not sure how to proceed.
Please advice as to what needs to be done.
Thank you

i'm using bash shell.If you are using a bash shell then .bash_profile is used by default.
It is located in user's home, if it does not exist then simply create it.
can this file be edited after installation?Yes. And also you can set the enviroment temporary (just for current session)
I just can't find the vi .login file."vi" is command (text editor very common in Unix and Unix like world)
.login does not need to exist (see .bash_profile as above). Note .login is ignored by bash shell.

Installation of Oracle Database 10g 10.2.0.3 on Windows 2003 Server

Hi Guys,
We have to install Oracle Database 10g 10.2.0.3 on Windows 2003.
I read on net, metalink and OTN as well and it seems there is no single 10.2.0.3 setup available to do so.
One has to upgrade from earlier version to 10.2.0.3.
Is that so? Is this the only way?
I mean if we want new and fresh 10.2.0.3 then don't we have installer for it?
In this case we will have to install 10.1.0.2 and then upgrade? (we have 10.1.0.2 installable with us)
And if at all that is the only path available then for 10.2.0.3 on Windows 32 bit - Patchset 5337014 i.e. p5337014_10203_WINNT.ZIP from metalink is the correct patch?
Thanks in advance!
Av.

Hi guys,
I donwloaded patchset - 5337014, and in its readme it is specified to download and install patch - 5601428.
So I downloaded 5601428 and set ORACLE_HOME and then fired command -
D:\oracle_pathces\5601428>optach apply
and i got error saying -
This Oracle Home does not have components/versions required by the patch.
ERROR: OPatch failed during pre-reqs check.
Following is the command and its output,
D:\Oracle_Patches\5601428>opatch apply
"set PERL5LIB=D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\lib"
"D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\bin\MSWin32-x86\perl.exe D:\oracle\pro
duct\10.1.0\db_1\OPatch\opatch.pl ..."
OPatch Version 1.0.0.0.48
Perl Version 5.006001
Oracle Home = D:\ORACLE\PRODUCT\10.1.0\DB_1
Location of Oracle Inventory = D:\ORACLE\PRODUCT\10.1.0\DB_1\inventory
Oracle Universal Installer shared library = D:\ORACLE\PRODUCT\10.1.0\DB_1\oui\li
b\win32\oraInstaller.dll
Path to Java = "D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\ORACLE\PRODUCT\10.1.0\DB_
1\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
D:\oracle\product\10.1.0\db_1\OPatch\opatch.pl version: 1.0.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
This Oracle Home does not have components/versions required by the patch.
ERROR: OPatch failed during pre-reqs check.
D:\Oracle_Patches\5601428>
Probably thought that following is the culprit -
Location of Oracle Inventory Pointer = N/A
so fired -
D:\Oracle_Patches\5601428>optach lsinventroy
gave following output -
D:\Oracle_Patches\5601428>opatch lsinventory
"set PERL5LIB=D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\lib"
"D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\bin\MSWin32-x86\perl.exe D:\oracle\pro
duct\10.1.0\db_1\OPatch\opatch.pl ..."
Using ORACLE_HOME/oui to look up oui libs...
Oracle Home = D:\ORACLE\PRODUCT\10.1.0\DB_1
Location of Oracle Inventory = D:\ORACLE\PRODUCT\10.1.0\DB_1\inventory
Oracle Universal Installer shared library = D:\ORACLE\PRODUCT\10.1.0\DB_1\oui\li
b\win32\oraInstaller.dll
Path to Java = "D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\ORACLE\PRODUCT\10.1.0\DB_
1\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
""D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe" -classpath "D:\oracle\prod
uct\10.1.0\db_1\oui\jlib\OraInstaller.jar;D:\oracle\product\10.1.0\db_1\oui\jlib
\srvm.jar;D:\oracle\product\10.1.0\db_1\OPatch\jlib\opatch.jar;D:\oracle\product
\10.1.0\db_1\oui\jlib\xmlparserv2.jar;D:\oracle\product\10.1.0\db_1\oui\jlib\sha
re.jar;." -Dopatch.retry=10 -Dopatch.delay=30 opatch/LsInventory "D:\oracle\pr
oduct\10.1.0\db_1\oui" "d:\oracle\product\10.1.0\db_1" opatch.pl 1.0.0.0.48 FALS
E"
Retrieving inventory.
There is no Interim Patch
D:\oracle\product\10.1.0\db_1\OPatch\opatch.pl version: 1.0.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
OPatch succeeded.
So thought is my opatch the culprit? Its version as seen in above dump is - 1.0.0.0.48, so is that causing any problem? And if yes, then how to get it resolved?
FYI: OS - Win2003, DB - 10.1.0.2.0
Can any one help in this?
Thanks!
Av.

Oracle Database 10g Express Edition Beta 2 Installation

Oracle Database 10g Express Edition Beta 2 Release for Microsoft Windows installation successful, no problems.

Hi Rekha,
The format mask 999G999G999G999G990D0000 is the format mask that I selected from the software itself. I also use this format mask for a single record update. If' s ok, no error, but with tabular form with multiple record update, it shows error .I also changed the decimal point to two digits ,select from software pop-up window (this was tested in the workspace provide by Oracle). It still shows error. Last test I put the space like 1 111,111.00 in a single record update it shows error (but if I put 1 in front of 111,111 without space it's ok-no space before). My point is from user point of view.In the first time user input 100000 the software accept it. Opp! it has to be 1100000. The user comes back after submit and put 1 without comma.It shows error (in tabular form with multiple record update not in single row update). While in the first time the user do not to key any comma at all. This may makes some confuses both the users and the developers which had to check error by adding program to checking some where in Page Processing or Page Rendering.
Thanks
Tritep

Oracle database 10g RAC and ASm installation

Similar Messages

Maybe you are looking for