Oracle Database XE with Microsoft Windows Server 2008 (32-bit)

I would like to find out if Oracle Database XE works with Microsoft Windows Server 2008 (32-bit)?
If not, is there any other Oracle Open Source Database version can work with Microsoft Windows Server 2008 (32-bit)?
Any help would be greatly appreciated!

I am installing W2k8 R2 Domain Controller with Oracle Express 10g.
This is the tip to make it work.
Go to the installer OracleXE.exe -> Right click + Select Properties + Compatibility + Run this program in Compatibility Mode fot + Windows 2003 Sp1
Then Select Run this Program as administrator.
After this run the OracleXe.exe and it will install properly.
Remember to double check that everything works fine.

Similar Messages

  • Oracle ODBC version error on windows server 2008 64 bit

    We had installed oracle 10g standard edition on windows server 2008 64 bit. After one hour use of ODBC connection, we are getting a error message like 'Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed'
    Find the link for error message. http://www.google.co.in/imgres?newwindow=1&biw=1600&bih=1075&tbm=isch&tbnid=zc1Vas4O9Eqj4M:&imgrefurl=http://social.tech…
    Please give solution for the said issue. Thanks in advance.

    SAP said it is Oracle not support windows server 2008.

  • Enterprise Manager Job for Scripting DataPump Export for Oracle Database Running On MS Windows Server 2008

    Greetings,
    I would like an example of an Enterprise Manager Job that uses an OS Script for MS Windows that would effectively run a datapump export of my Oracle 11g database (11.2.0.3) running on a Windows 2008 server.  My OEM OMS is running on a Linux server with an Oracle 12c repository.  I'd like to be able to set environment variables for date and time, my export file name (that includes SID, and export date and time, job name, and other information pertinent to the datapump export.  Thus far, I have been unsuccessful with using the % delimiter around my variables.  Also, I have put the "cmd/c" as the "Interpreter" but I am not getting anywhere in a hurry :-( 
    Thanks  Million!!!
    Mike

    1. Try to reach server with IP )(bypath name resolution)
    2. Disabling IPv6 is not good idea
    3. What is server operating system and what is workstation operating system?
    4. Is this new or persistent problkem?
    5. If server and workstation has different SMB version, set higher to lower one (see Petri web for procedure)
    6. Uninstall AV with removal tool and test it without AV
    7. Use network monitor to diagnose network traffic.
    M.

  • Oracle db 11gR2 for windows server 2008(64 bit)

    Hi,
    i want to download the Oracle DB 11gR2 installable for windows server 2008(64 bit), but i am unable to find it in e-delivery or anywhere else in oracle website.
    Please let me know if this installation is possible or not and the link from where i can download the installer.
    Thanks in advance.

    Hi;
    All related information cover at below notes:
    Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
    Release Schedule of Current Database Releases [ID 742060.1]
    Database 11g Release 2 Certification Highlights [ID 1065024.1]
    Regard
    Helios

  • Error on clone database, oracle 10g release 2 for windows server 2008

    Hi,
    OS: Windows Server 2008 X64
    Oracle: oracle 10g release r2 for windows server 2008
    An error occurred when creating a database, stop at last step, Screenshot:
    [http://temp.wsria.com/oracle_create_db.png|http://temp.wsria.com/oracle_create_db.png]
    the trace log content:
    [main] [9:56:35:982] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
    [main] [9:56:35:982] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
    [main] [9:56:35:997] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
    [main] [9:56:36:668] [Host.checkOPS:2055] Inside checkOPS
    [main] [9:56:36:668] [Host.checkOPS:2067] Trying to check cluster existence
    [main] [9:56:36:715] [Library.getInstance:97] Created instance of Library.
    [main] [9:56:36:715] [Library.load:197] Loading orauts.dll...
    [main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orauts.dll
    [main] [9:56:36:715] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:715] [Library.load:197] Loading MSVCRT.dll...
    [main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Library.load:197] Loading orawsec10.dll...
    [main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Library.load:197] Loading orasrvm10.dll...
    [main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Version.isPre10i:189] isPre10i.java: Returning FALSE
    [main] [9:56:36:731] [WindowsSystem.regKeyExists:1006] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
    [main] [9:56:36:746] [WindowsSystem.getCSSConfigType:1163] configType=null
    [main] [9:56:36:746] [Host.checkOPS:2073] cluster existence:false
    [main] [9:56:36:746] [Host.checkOPS:2111] Cluster installed=false
    [main] [9:56:36:902] [InitParamHandler.endElement:506] CustomSGA flag: false
    [main] [9:56:36:902] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
    [main] [9:56:36:918] [InitParamHandler.endElement:508] Mem Percentage: 40
    [main] [9:56:36:918] [InitParamHandler.endElement:526] distributing Memory: 13737443328
    [main] [9:56:36:918] [MemoryCalculator.calculateMemory:122] Setting SGA to MAX_SGA 1610612736
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
    [main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
    [main] [9:56:36:918] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
    [main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
    [main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
    [main] [9:56:36:933] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1477] See for any transportable datafiles in TemplateManager.....
    [main] [9:56:36:933] [TemplateManager.isInstallTemplate:2178] Selected Template by user:=General Purpose
    [main] [9:56:36:933] [TemplateManager.isInstallTemplate:2185] The Message Id to be searched:=GENERAL_PURPOSE
    [main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1489] create new clone data file for tp file.......
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7184] setupOIDCommandlineParameters:
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7185] m_regWithdirService: false
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7186] m_unregWithdirService: false
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7187] m_updateDirService: false
    [main] [9:56:36:933] [Verifier.processRawConfigFile:3523] StorageType == 0
    [main] [9:56:36:933] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\oracle\product\10.2.0\oradata
    [main] [9:56:36:933] [TemplateManager.updateDatafileDestination:1957] updateDatafiles:datafileDir=D:\oracle\product\10.2.0\oradata
    [main] [9:56:36:933] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=1
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo01.log
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=2
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo02.log
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=3
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo03.log
    [main] [9:56:36:965] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
    [main] [9:56:36:965] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [9:56:36:965] [ProgressOnlyHost.performOperation:178] validateTemplate=true
    [main] [9:56:36:965] [OracleHome.isRacEnabled:149] bRacOn = false
    [main] [9:56:36:980] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
    [main] [9:56:37:105] [Host.executeSteps:4044] Executing steps....
    [main] [9:56:37:105] [Host.setUpForOperation:2920] setUpForOperation: Mode = 128
    [main] [9:56:37:121] [Host.executeSteps:4186] setupForOperation returned: true
    [main] [9:56:37:121] [Host.createStepSQLInterface:5948] sid =ora10g
    [main] [9:56:37:136] [SQLEngine.initialize:242] Execing SQLPLUS/SVRMGR process...
    [main] [9:56:37:136] [SQLEngine.initialize:270] m_bReaderStarted: false
    [main] [9:56:37:136] [SQLEngine.initialize:274] Starting Reader Thread...
    [Thread-4] [9:56:37:355] [StepContext$ModeRunner.run:2478] ---- Progress Needed:=true
    [Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
    [Thread-4] [9:56:37:464] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
    [Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
    [Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-4] [9:56:37:479] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
    [Thread-4] [9:56:37:620] [OracleHome.isRacEnabled:149] bRacOn = false
    [Thread-4] [9:56:37:667] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
    [Thread-4] [9:56:37:667] [Oradim.getAddEntryCommand:353] AddEntry=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, ORA10G, -startmode, manual, -spfile]
    [Thread-4] [9:56:38:899] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, ORA10G, -startmode, auto, -srvcstart, system]
    [Thread-4] [9:56:39:55] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
    [Thread-4] [9:56:39:117] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@c73f0d8
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\oracle\product\10.2.0\flash_recovery_area
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1750] old Spool = null
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1751] Setting Spool = D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ora10g\CloneRmanRestore.log
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1752] Is spool appendable? --> true
    [Thread-4] [9:56:39:991] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\oracle\product\10.2.0\admin\ora10g\pfile\init.ora

    Check your SQLNET.AUTHENTICATION_SERVICES settings in sqlnet.ora file.
    ORA-28547 : Connection to server failed, probable Net8 admin error
    thanks
    http://swervedba.wordpress.com/

  • Oracle 10.1.0.4 on Windows Server 2008 64 bits Standard

    Hello,
    For migratiion purposes, we would need to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard, and then upgrade it to 11g.
    We have forced Oracle 10.2.0.4 installation on a Windows Server 2008 64 bits Standard, but we are not sure for 10.1.0.4.
    Since we don't have that software version to try it and we are looking for it, is it possible to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard?
    Could you point me out a document that reference Oracle versions compatibilty with Windows Server 2008?
    Thanks

    At MOS, click on the certifications tab, then enter database in the first drop down box, and select the rdbms. Then enter the relevant info in the other boxes, and then you will see Oracle Database 10.1.0.4.0 is not certified on Microsoft Windows x64 (64-bit) 2008 R2
    Certification is a little more strict than supported, but extended support ended in January.      REMINDER: Premier Support for Oracle Database 10.1 ends January 2009 [ID 761713.1]
    There's always lifetime support, but your case shows how useful that can be.

  • Oracle 11g R2 to MS Access .mdb (Windows Server 2008 64-bit) problem

    I have a need to make connection from Oracle 11g R2 to MS Access database file (mdb). OS is MS Windows Server 2008 64-bit. My configuration is next:
    1. I made System DNS mikeacs (using c:\windows\sys_wow6\odbcad32.exe) to my access mdb file;
    2. I made initmikeacs.ora file in ora_home\hs\admin folder:
    # HS init parameters
    HS_FDS_CONNECT_INFO = mikeacs
    HS_FDS_TRACE_LEVEL = debug
    HS_FDS_SHAREABLE_NAME = c:\Windows
    3. Listener.ora file is:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\Oracle\product\11.2.0\dbhome_1)
    (PROGRAM = extproc)
    (ENVS = "EXTPROC_DLLS=ONLY:C:\Oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    (SID_DESC =
    (SID_NAME = mikeacs)
    (ORACLE_HOME = c:\oracle\product\11.2.0\dbhome_1)
    (PROGRAM = dg4odbc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = cspo02)(PORT = 1521))
    4. Tnsnames.ora is:
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    MIKEACS =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521))
    (CONNECT_DATA=(SID=mikeacs))
    (HS=OK)
    5. After this, I restarted Listener:
    lsnrctl stop;
    lsnrctl start;
    Given feedback:
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
    Start Date 20-RUJ-2010 14:47:21
    Uptime 0 days 0 hr. 0 min. 3 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\Oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
    Listener Log File c:\oracle\diag\tnslsnr\cspo02\listener\alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "mikeacs" has 1 instance(s).
    Instance "mikeacs", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    6. I created db link: create public database link macs using 'MIKEACS' (connected as sysdba);
    7. tnsping mikeacs:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521)) (CONNECT_DATA=(SID=mikeacs)) (HS=OK))
    OK (0 msec)
    Then, when I try fire query (connected as sysdba): select * from mytable@macs;
    get result:
    ERROR at line 1:
    ORA-28513: internal error in geterogeneous remote agent
    ORA-02063: preceding line from MACS;
    Although, when I fire the same query, but connected as other user, get next result:
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [Microsoft][ODBC Driver Manager] Data source name not found and no default
    driver specified {IM002}
    ORA-02063: preceding 2 lines from MACS
    Where is my problem? Please help. Thanks in advance!

    That's the problem. DG4ODBC on 64bit Windows is 64bit and thus it also requires a 64bit ODBC driver.
    If you don't find one - maybe you can install DG4ODBC 32bi on a 32bit platform (please do NOT install it on the 64bit Windows machine) and then use this 32biit DG4ODBC with the 32bit ODBC driver.
    Another option would be to purchase a commercial ODBC driver or a bridged ODBC driver.

  • Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

    Dear All Precious Friends,
    I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
    I have already installed Oracle Database 11g Release 2 -------
    ----Then i configured JAVA Access bridge
    --------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
    -----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
    ..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
    -----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
    Please help my Oracle Friends
    Your early help will be highly appreciated.
    thanks and regards
    Hassan

    You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
    In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
    First look for this link then drill into it:
    Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
    In this section you will find the following:
    This is the full product installation of FMw 11 Release 2 (Forms & Reports)
    Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
    This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
    Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
    Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
    Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
    Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
    This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6.  This is NOT a full product installation - just a patch
    Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
    There are no patch sets for Release 2 as of yet.

  • Oracle 10g xe 32 bit on windows server 2008 64 bit

    I have windows server 2008 64 bit and oracle 10g xe 32 bit
    does it work on ?
    I have tested but no success.
    Any one knows reasons

    You seem to have posted threads before on very similar topics, and you also posted this once in the appropriate forum:
    {thread:id=2270082}
    Please avoid duplicating posts!
    As already stated in one of your other threads, it is not a certified combination. Again, read the Installation Guide !
    If you want to play with it and try to make it "work", that's up to you. And as you say you have already tried, with "no success", it seems you already got an answer.
    I suggest you close this thread and continue in the dedicated 10g XE forum thread (or try the 11g XE Beta - only for 32-bit Windows yet, but there's a chance the general release will be aimed for Windows x64 as well).
    Edited by: orafad on Aug 20, 2011 1:14 PM

  • Installing Oracle SOA suite 10.1.3.1.0 on windows server 2008-64 bit.

    Hi,
    Installing Oracle SOA suite 10.1.3.1.0 on windows server 2008-64 bit.
    Getting the following exception when installing BPEL
    oracle.as.install.util.ActionFailedException : java.io.FileNotFound Exception :
    D:\software\bpel\bpel_oc4j\install\log.properties(The system couldnot find the specified).
    at oracle.as.install.action.LogConfigAction.execution(Unknown Source)
    at oracle.as.install.util.ActionQueue.run(Unknown Source)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(Unknown Source)
    Caused by : java.io.FileNotFoundException : D:\software\bpel\bpel_oc4j\install\log.properties
    (The system cannot find the specified file)
    at java.io.FileInputStrem.open(Native Method)
    at java.io.FileInputStrem.<init>(Unknown Source)
    at oracle.as.install.action.LogConfigAction.execute(Unknown Source)
    at oracle.as.install.util.ActionQueue.run(Unknown Source)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(Unknown Source)
    In the unzipped BPEL software folder for installation there is no such file.
    Have installed several Oracle SOA suite 10.3.1.0 on windows server 2003 - 32 bit using the same software.
    But now am using it along with a patch- p6712338 for windows server 2008-64 bit.

    If this is a production instance, you should NOT read past this sentence -- contact Oracle support to do it right.
    If this is just for testing/experiments, have you tried putting an empty file at D:\software\bpel\bpel_oc4j\install\log.properties? How about putting a copy of the file from one of your "windows server 2003 - 32 bit" installations?
    Good luck, Andy

  • Oracle XE for windows server 2008 64 bit

    I have windows server 2008 64 bit
    I want to install a express edition on it
    but does't getting source link to download
    any one knows pls tell me

    Hi Nine;
    Please see:
    http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
    Also see:
    XE on MS Windows Server 2008?
    Regard
    Helios

  • Want to know if Internet Explorer 10 and 11 are they compatible with Windows Server 2008 32 bit?

    Want to know if Internet Explorer 10 and 11 are they compatible with Windows Server 2008 32 bit?

    Compare & contrast:
    Internet Explorer 11 system requirements
    http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-11-win-7
    Internet Explorer 10 system requirements
    http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-10-win-7
    Internet Explorer 9 system requirements
    http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-9
    Neither IE11 nor IE10 is supported in Vista either.
    ~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

  • Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit

    1.I want to install and configure Oracle FMW version 11.1.1.2.0 in Windows server 2008 64 bit.
    2.I have followed the steps too as described here in these two forum links:
    1.http://cn.forums.oracle.com/forums/thread.jspa?threadID=2245015
    2.Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit
    3.I am giving my installtion steps..
    I have installed JDK: 1.7.0.
    I have succesfully installed web logic version wls1035_generic.jar.
    I have also installed the FMW version 11.1.1.2.0 using all four disks(Install and donot configure.)
    I have also installed patch version 11.1.1.3.0.
    But When I am trying to run config.bat then It Stops at Creating Domain at 0%,nothing happens, process is sleeping:
    It creates domain of size 9.23 mb and after a long time of approx 900 min It displays "DOMAIN CREATION FAILS".
    I have also checked the path ..It doesnt contains any special characters.
    Any ideas???

    Hi John,
    As per ur suggestion , I have successfully installed FMW 11g in Windows server without Domain Fail.
    1). Installed JDK 1.6u29
    2). Installed WebLogic 10.3.3
    3). Installed FMW 11.1.1.2
    4). Installed FMW 11.1.1.3 Patch
    Now According to the Business need ,I want to install FMW 11.1.1.2 in Linux 32 Environment. Can U please guide me the versions of Java, Weblogic, FMW and its patch so that I can Install it in Linux 32 bit without Domain Fail.
    Deepak Jha

  • Does Oracle HTTP server exist for Windows Server 2008 64 bit?

    Hello!
    We are moving our database 10.2.0.4 from Windows 2003 32 bit to the new server Windows Server 2008 64 bit,
    and I didn't search Apache on the companion disk.
    Will it be released later?
    What will be alternative?
    Irina.

    Hi
    Did you find a solution to your question ? I am also looking for installing appex http Server on a W2008 X64 Server.
    Thanks for a answer.
    Matthias

  • Problems installing OBIEE 11g on Windows Server 2008 64 bit

    Hi, I'm trying to install OBIEE 11g on Windows Server 2008 64 bit (standard edition, SP2), and it's blowing up running the installer. The installer gets past the first couple of "info" screens, but blows up prior to coming to the first "real" screen with an error:
    Microsoft Visual C++ Assertion Failed:
    Program: ...
    File: ../../../src/share/native/sun/font/t2k/t2kstrm.c
    Line: 132
    Expression: pos <= t->maxPos
    Has anyone seen this and/or have an idea how to work around this? Note that I did do the prerequisite download / install of the 2005 Visual C++ 64 bit libraries.
    Thanks,
    Scott

    Just to close the loop on this thread, this does indeed seem to be some sort of font / java issue on our servers. I've been completely unable to get the install to work using the GUI. However, if I run it from command line using the -silent and -response paramaters along with a proper response file, the install went perfectly. I'm going to continue working the SR with Oracle - don't want to be stuck using -silent mode when things get more complicated, but at least now I can move forward.
    If anyone else has a better workaround - please let me know. "Silent" mode is workable, but difficult and time consuming.
    Thanks,
    Scott

Maybe you are looking for