Oracle drive and oradav - ORA-20504: User not authorized to perform the req
Anyone have any idea why we may not be allowed to copy files to portal?
We have checked the edit region to allow all files, quota is unlimited and we're using portal as a priviledged user (manage) for the page group.
For some reason we are globally blocked from copying files to /dav_portal/portal.
Any suggestions?
I have the exact same problem on Oracle Portal 10.1.4 while I'm using Windows XP. I never had the webdav problem when I was using Windows 2000/NT on older versions of the portal. There is a note on Metalink (Note:338932.1) that seems relevant to this issue but I haven't been able to try WebDAV while using a different OS than Windows XP to confirm that is the bug I've encountered. The solution in that note says "Wait for the bug fix (no earlier than Portal 11.0) OR Use a client other than Windows XP."
I found another note (Note:367860.1) with the solution being to install and use the Oracle Drive client. Did that, and still got an "Error 5: Access is denied" alert when trying to add a file to a plain portal page with NO tabs and a single Items region that allows users to add content to it. Next, under that page's properties on the Items tab, in the Default WebDAV Types section, changed Default Regular Files to Simple File and tried adding a file using WebDav and ta-daaaa! It worked. However, I don't want to use the Simple File item type, I want to use the regular File!!! And yes, I have made some customizations to the File item (changed defaults, re-order attributes, etc.) Not sure what to do next. Any ideas???
Similar Messages
-
ORADAV problems - ORA-20504: User not authorized to perform the req
Anyone have any idea why we may not be allowed to upload files to portal via oradav or webdav?
We have checked the edit region to allow all files, quota is unlimited and we're using portal as a priviledged user (manage) for the page group.
We are however allowed to upload "zip" files only, but we're not allowed to unzip them! Apparently we're prohibited from uploading or creating files, since unzipping creates files, it fails as well.
Any suggestions?bump
-
Internal Error - User not authorized to use the gross profit module
We have a client who has a limited logistics license and just recently moved to 8.8. in the past he could deliver directly from a pick list but now he is getting an error "User not authorized to use the gross profit module". Is this something related to an authorization setting? Before the move this task was not an issue. Please advise.
Thank you.
ReneHi Gordon, one of our user just experienced the same problem in sales order.
In Form Settings he ticked "Display BP Catalog Number", and while he entered the catalog number he got the same error message.
I'm not sure what this has to do with the gross profit base method...maybe the fields "Gross profit" and "Gross profit base price"? Don't know where to set them up.
Thanks. -
Any knows how to use versioning feature on OracleDrive
I've create library and set Versioning Model to manual , and there is still error no. 58 from Oracle Drive during saving file on that library(directory).
If the answer is "not supported" , maybe a little sugestion to OTN to imporove it -Oracle Drive doesn't support manual versioning in this release. It is planned for the next major release.
thanks for the feedback,
-sancho -
Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.
My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there. -
i sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay
never mind i got it by going into my account and veiwing hidden items and there it was
-
I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro! Anyone have a suggestion??
Zap the PRAM and Reset the SMC, then try again. If the problem remains, update to 10.6.8 and repeat.
-
Web Services Test ORA-28150: proxy not authorized to connect as client
Oracle 11g R2 APEX 4.2 with the latest listener.
Trying to click on the test button on the Oracle.example.hr sample under the SQL WORKSHOP Restful Services and receive the following error:
Internal Service Error 500
Error during evaluation of resource template: GET hr/employees/, SQL Error Code: 28,150, SQL Error Message: ORA-28150: proxy not authorized to connect as client
I have the APEX_REST_PUBLIC_USER and APEX_LISTENER created from the supplied scripts and have executed the DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE.
We can't get the web services to work.
2 days wasted on this issue; Any help would be greatly appreciated!
Edited by: 970698 on Nov 13, 2012 6:39 AM
Edited by: 970698 on Nov 13, 2012 6:40 AMThe error is saying that for whatever reason APEX_REST_PUBLIC_USER cannot proxy to the SCHEMA (APEX WORKSPACE) where the RESTful Service is defined.
Allow me explain how RESTful Services are invoked in Listener 2.0
- It is important that the RESTful Service is invoked as the SCHEMA user that the RESTful Service is defined in, to make sure the correct database security rules/constraints are applied when executing the query/pl sql block associated with the service.
- The mechanism Listener uses to do this is called connection proxying, which is a facility provided by the Oracle database to switch a connection from one user to another.
- Of course if you could switch from user A to user B without restriction that would not be good. Instead user B must grant user A the privilege to proxy to user B's identity.
- Thus when an APEX workspace first has a RESTful Service created in it, it performs this grant, giving APEX_REST_PUBLIC_USER the privielge to proxy to the workspace/schema where the RESTful Service is defined.
- Then when the RESTful Service definition is being evaluated for execution by the listener it proxies from APEX_REST_PUBLIC_USER to the workspace schema user immediately before executing the query/plsql of the service.
- It looks like the granting of the proxy privilege has not happened/failed for some reason.
Can you tell me:
- If the workspace where the service was defined is a newly created workspace, i.e it was created after installing APEX 4.2?
- If the workspace was created before or after running apex_rest_config.sql?
A manual workaround for your problem would as the SYS user, do:
ALTER USER <apex_workspace_name> GRANT CONNECT THROUGH apex_rest_public_user;
Regards,
Colm -
" User not authorized" error while deploying webdynpro application on WAS
I am getting following error while deploying dyn pro application on WAS
Error
May 17, 2005 6:37:21 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[002]Deployment aborted
Settings
SDM host : DYNPRO
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/720359/LOCALS1/Temp/temp50603PVTOSAP.ear
Result
=> deployment aborted : file:/C:/DOCUME1/720359/LOCALS1/Temp/temp50603PVTOSAP.ear
Aborted: development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [DYNPRO] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: User not authorized.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted
Additional Log :
May 17, 2005 6:37:21 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[002]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7162 - 630_SP]/>
<!NAME[D:\usr\sap\DYN\DVEBMGS00\SDM\program\log\sdmcl20050517131312.log]/>
<!PATTERN[sdmcl20050517131312.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
May 17, 2005 6:43:12 PM Info: -
Starting deployment -
May 17, 2005 6:43:12 PM Info: Loading selected archives...
May 17, 2005 6:43:12 PM Info: Loading archive 'D:\usr\sap\DYN\DVEBMGS00\SDM\program\temp\temp50603PVTOSAP.ear'
May 17, 2005 6:43:14 PM Info: Selected archives successfully loaded.
May 17, 2005 6:43:14 PM Info: Actions per selected component:
May 17, 2005 6:43:14 PM Info: Update: Selected development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08' updates currently deployed development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.09.04.27'.
May 17, 2005 6:43:15 PM Info: Error handling strategy: OnErrorStop
May 17, 2005 6:43:15 PM Info: Update strategy: UpdateAllVersions
May 17, 2005 6:43:15 PM Info: Starting: Update: Selected development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08' updates currently deployed development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.09.04.27'.
May 17, 2005 6:43:15 PM Info: SDA to be deployed: D:\usr\sap\DYN\DVEBMGS00\SDM\root\origin\local\PVtoSAP\LOKAL\0.2005.05.17.18.37.08\temp50603PVTOSAP.ear
May 17, 2005 6:43:15 PM Info: Software type of SDA: J2EE
May 17, 2005 6:43:15 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
May 17, 2005 6:43:15 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
May 17, 2005 6:43:15 PM Error: Aborted: development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [DYNPRO] with user name: [J2EE_ADMIN]
Check your login information.
Exception is:
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: User not authorized.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
May 17, 2005 6:43:17 PM Error: -
At least one of the Deployments failed -Hi Abhijeet,
1. Execute the remoteGUI
<<Installed drive>>:\usr\sap\J2E\JC00\SDM\program\RemoteGui.bat
2. Click the "Connect to SDM server" (Menu "SDM GUI --> Login")
3. Give the hostname (DYNPRO) and port (50018)
4. Enter the password and click login.
Check whether you are able to login or not. If you are not able to login through the RemoteGUI, then the password might be wrong. Check the password.
Regards,
Santhosh.C -
i am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
here is my listener file
lsn =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.125.128)(PORT = 1575))
#ADR_BASE_LISTENER = /u01/app/oracle
(SID_LIST_LISTENER=
(SERVICE_NAME=kull)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
tnsnames.ora
to_lsn=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = kull )
my database name is kull
please somebody helpBiswaranjan wrote:
i have two database one is kull and another is kk
i configured listener.ora in kull
and tnsnames.ora in kk
when i am running lsnrctl start listener in database kull
This makes no sense. You don't configure a listener nor a tnsnames.ora "in a database". I hope this is just a language issue and not reflective of a fundamental misunderstanding of how tns works.
read: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ Help! I can’t connect to my database
read: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ Help! I can’t connect to my database (part duex)
it is showing the message
Alias lsn
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 05-JUL-2013 19:08:06
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/11.2.0/db_1/log/diag/tnslsnr/server1/lsn/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1575)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1575)))
The listener supports no services
The command completed successfully
and in another database in kk when i am giving the command tnsping to_lsn
it is giving this message
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = kull)))
OK (0 msec)
but when i am cross check sqlplus system/manager@ to_lsn
it is giving the following error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor -
TNS-01190: The user is not authorized to execute the requested listener com
Hello All,
I just re-installed oracle forms10g and oracle 10g rel 2 on windows vista. The first time i installed both software, i swithched d pc off without turning off the listener on my laptop. When i rebooted, i found that i could not startup both forms 10g and oracle 10g database let alone loggin in. So i re-installed both prodcts. Every time i try to turn off the listener i get the error TNS-01190: The user is not authorized to execute the requested listener com. I have tried several ways to turn this off, but all effort has failed. After reading several literature on this issue, I learnt that if you change the password then any user who knows the password should be able to turn off the listener. But I still get thesame error on trying to add a password. Please can anyone help me by telling me how i can deduce the oracle user that has the administrative right to perform this task.
Pls forgive me for the long text. Thanks again. Pls note I am not an expert so pls be explicit in your explanations.
cheers
ajMany thanks for your reply. It did not allow me to set up the password. It came back with thesame error TNS-01190 The user is not authorized to execute the requested listener command.
I used the change_password command in lsnrctl from Dos. Note that I have created several users eg Oracle, on windows and gave it the Administrator privilege. But still it will not let me stop the listener or create a password for it. Hope anyone has experienced this before? Due to this my system has been on for the past 24hrs, approximately. Many thanks.
Cheers
Aj -
You are not authorized to open the form ORA-01403: no data found
Hi,
I have created a new Oracle 10g forms. It compiles sucessfully but when it is opened it gives a error message : You are not authorized to open the form ORA-01403: no data found.
I am already connected to database. Can anyone please help what is the reason for this issue and any possible resolution?Sounds like you have some kind of security enabled. However, because you didn't share the details about your environment or what you are doing there isn't much we can do is guess.
Exactly which Forms version are you using?
Exactly which database version are you using?
Are you using anything like Oracle E-Business (e.g. template.fmb)?
Did you create the form with Oracle Designer?
If you create a simple form using only the DataBlock and Layout Wizards against the Oracle demo schema (SCOTT), does this form run?
Any additional details outlining what you are doing or have already done might be helpful. -
I tried the Aperature trial and liked it, but did not purchase it when the trial ended. A few weeks later, i purchased snow lepord and purchased aperture via the app store. I have had not been able to use it since. Each time i open it , afer a few seconds i get the spinning wheel of death and Aperture is frozen. I have to force quit Aperture to shot down mycomputer. I have re-installed Aperture 3 times with th e same result. I have iphoto on my computer as well is this causing the problem? I want my money back!!! Can anyone help?
You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip. -
Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
IngoHi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo -
I just recently upgraded to the new itunes and getting this, ADAdPolicyEngine_DidEnterStation, could not be located in the dynamic link library C:|programsFiles(x86|itunes.dll, itunes.exe Entry point not found itunes Error 7 windows errors127
See iTunes launch errors caused by iAdCore.dll.
Review the rest of the user tip if required.
tt2
Maybe you are looking for
-
Dear Guru, I am getting error while I am doing initial upload via MB1C. Error is: No commitment item entered in item 00000 1000 399999 Please help, Swapnil
-
Clear wsdl cache every time a bpel process call is made.
Hi All, I have a bpel process which gets input xml of the size of 6MB. This bpel process interacts with a java component using the WSIF approach to reorder the xml input recieved. The strange problem that i am currently encountering right now is for
-
Return it or don't return it - faulty cable
I've had a cable swapped out (for the 2nd time) as it burned out. The Apple site says I must return the faulty cable or I'll get charged. They've also given a returns label. However, inside the package I received is a piece of paper that says 'Don't
-
GetData(): rows has no properties
Hello, I've got the following code: function Update(id) { var observer = new Object; var rows = null; var chat = new Spry.Data.XMLDataSet("/xmldataset.php?liste=x&id=" + id, "/data/field", {useCache:false}); observer.onDataChanged = function(dataSet,
-
Dynamic change in contentPane in JApplet
Hi all, I implemented an Swing application that sets the contentPane dynamically when an action is Permormed. e.g public void actionPerformed(ActionEvent e) { if (something){ frame.setContentPane(createXXContentPane()); else frame.setContentPane