Oracle EBS forms not working after dataguard switchover.

Hi Guys,
I have followed steps in document 1070033.1 to configure a data guard for R12 E-business suite and it's working properly now. i tried to perform a switchover to test the data guard, the switchover for the database tier was successful also i was able to configure and start the apps tier with no errors but when logging into the application and trying to run any form an error message is displayed saying "unable to communicate with run time process". the result of "odopmnctl status" show that all OC4Js are running and active. no errors exist in the log files. so why are the forms not running
omari

hi Helios,
The error that raises up when calling the form is "FRM-92101". the application.log file shows the error stack below. your help will be appreciated.-
formsweb: Forms session <2> exception stack trace:
oracle.forms.engine.RunformException: Forms session <2> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:736)
regards,
omari

Similar Messages

  • Adobe form not working after MSS Patch Upgrade

    Hi,
    We have implemented ESS/MSS and in one of the MSS scenario to create a new personnel chnage request we have an Adobe interactive form (WD) which actually validates the users Social Security number by calling an RFC in the ECC 6.0 and updates the form's filed on the front end. There was an issue of "Expired SSO Ticket" and to resolve this SAP recommended to apply SAP_JTECHS (SAPJTECHS13P_14-10003467) and SAP_JTECHF (SAPJTECHF13P_15-10003468) patches to fix the problem. But after applying these patches Adobe form for PCR has stopped working and it just gets hanged, form appears on the front end and when user enters the values and hit enter to validate, it doesnt communicate with the Backend ECC system only the SAP status picture keeps rotating, i turned the trace ON and checked it, its not at all communicating with the ECC system. Where as in other systems where we have not appplied the pacthes, those are working fine. One of the error i noticed in the server log is as below:
    jco.client.mysapsso2=AjExMDAgAA5wb3J0YWw6QkNPTFNUT4gAE2Jhc2ljYXV0aGVudGljYXRpb24BAAdCQ09MU1RPAgADMDAwAwADU1BEBAAMMjAwODExMDMxNjU3BQAEAAAAEAoAB0JDT0xTVE//AQUwggEBBgkqhkiG9w0BBwKggfMwgfACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGB0DCBzQIBATAiMB0xDDAKBgNVBAMTA1NQRDENMAsGA1UECxMESjJFRQIBADAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMDgxMTAzMTY1NzQwWjAjBgkqhkiG9w0BCQQxFgQUfD7V7TS!58cgzIFyucxCSL4ltuswCQYHKoZIzjgEAwQvMC0CFA4Q0!Rr2xYFPwFwXz8WeFF1UALlAhUAmHiTdHw!3s4Q!Jc9gDyY4QSvxa4=, user=, mshost=sapdv2.company.com, r3name=DV2, jco.client.type=B, jco.client.trace=0, group=SRS, codepage=1100}
    Client not connected#
    #1.5 #76C1EDD07B440026000000000007501600045ACC2EF6809D#1225732914577#/Applications/BusinessLogic#sap.com/home~zb2bzsrs#com.sap.isa.core.eai.sp.jco.JCoConnectionStateful#BCOLSTO#1480##hadspd1.bnet_SPD_306896250#BCOLSTO#daca9e30a9cb11dd99c976c1edd07b44#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/Applications/BusinessLogic#Java###Error occcurred in EAI layer "".#2#com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in module RSQL of the database interface.#parameters: [client]='null' [user]='null' [language]='null' [ashost]='null' [systemnumber]='null' [mshost]='null' [gwhost]='null' [gwserv]='null' [group]='null' [systemid]='null'
    Properties: {passwd=?, lang=en, client=150,
    Can someone please suggest what could be the possible reason for such a problem with Adobe form and whats the way out to resolve this. Appreciate a quick help in this regard.
    Thanks in  advance,
    Sarabjeet.

    Hi,
    We had the same issue after the Patch update to SP17 in both Backend as well in Portal, to resolve my colleagues had a look at the standard forms which were working and found that because of the patch update the script used in the custom forms was changed and not the standard and
    on event trigger which was processed in the container they replace the script to the standard one. and it started working.
    But this is not the solution we are looking at solution on having the same version of script as in the standard even after the patch update.
    So to your point to resolve compare the scripts in both standard and customized forms and do the same.
    And also have a look at the SAP Note: 1109392
    .... this is a temporary solution.....
    Hope this helps.
    Cheers-
    Pramod

  • HCM Processes and Forms not working after SP Upgrade

    Hi Friends,
      We recently upgraded our Service pack level of ABAP and Basis.SAP_BASIS -   from SAPKB70016 to SAPKB70019
    SAP_ABA    -   SAPKB70016 to SAPKA70019. Prior to the the SP upgrade everything was working fine. After the upgrade we are having the following issues.
    1. In Portal after opeing the Adobe form, If the move the cursor to the top portion of the form where we can add the attachment("Add attachment" button), the cursor always turns into the wait symbol and we are not able to attach anything into the form.
    2. In a separation form the Date field is an input field and even if the user enters a different date  the system takes the current date. The user also selected the separation reason from dropdown menu, but no display in form.
    3. Transfer form is having the following issue:When initiating the form the u201Csendingu201D manager must input the personnel number (identical to the user ID) of the u201Creceivingu201D manager. This way, once submitted by the sending manager, the system can determine the next agent in the process.Recently, that form has stopped working and the value entered by the sending manager is no longer recognised and the system issues the error message  u201CEnter the system user name of the manageru201D.
    Please help if you have any hint.

    Resolved after consulting with OShttps://forums.sdn.sap.com/questions.jspaS

  • Copy form Wrod document and Paste in Oracle Forms not working

    Hi
    In one Oracle Finacial instance Copy from other document (word or Excel) and Paste in Oracle Financial Forms not working. Any body know the reason for this?
    Eg. Copy Invoice Number form Excel and Paste it in Some of the payable forms or any other forms
    Regards
    Sunil

    Hi
    We have tried this but no output. ie the issue continues the same. This issue is there for all PC including Server. Is there any other solution avaliable. .
    Regards
    Sunil

  • "Find Form" calendar is not working after migration

    Hi,
    We have migrated from Oracle 9i to 10g.we have one form ''FormA" and "find form" for that FormA.Calendar functionality is present in both FormA and "Find FormA".if we try to use calendar functionality in "Find formA",its giving error like FRM-40104 - No such block calendar,FRM-40105(unable to resolve reference to item claendar.cell1.........),FRM-41045 (cannot find item - invalid id).Actually this scenario is not working after migrating the FORMS application to 'OAS10.1.2' from 'OAS904' .
    In 'OAS904' ,The calendar item is present in the 'FormA' form, the 'calendar.show' hides the "Find FormA" and appears in the FOrmA and uses FormA's calendar item and after selecting the date,the date s applied to the "Find FormA"
    But after migration, the "Find FormA" is not hiding, so its not able to retrieve the calendar properties.Because the calendar is present in "FormA".
    Any problem with pll files like 'qmslib65','qmsolb65',qmsevh65'??
    please help me by providing suggestions.
    Thanks

    qmslib65','qmsolb65',qmsevh65Are these libraries self-written or from some third-party tool?

  • Custom Master Detail form not working In EBS

    Custom Master Detail form not working In EBS
    Hi all,
    I have two custom tables -- 1) XXX_DIE_Headers
    2) XXX_DIE_LINES
    I developed a Master Detail form based on above tables. XXX_DIE_Headers is the Master Block (Single record) & XXX_DIE_LINES is the detail block ( Multi line block ).
    Yes, I used Appstand,Template.fmb for developing this form. The Master block has three fields out of which Two are required fields and i have given initial value for them.
    As i deployed it in APPS(EBS),everything about it is working fine (insert,delete,master-detail behaviour) except querying.
    When i press F-11 , It pops up a message "Do you want to save changes you have made" Choice - yes,no,cancel.
    I don't want this message to pop up.
    The scenario is :- I open the form.( without entering ) Press F11 . The message Pops up.
    Please give me suggession on how to work it around so as form directly goes to query mode ,without popping the message.
    regards
    ravi

    It seems that you are changing a database value in your form, do you have any changes in WHEN-NEW-FORM-INSTANCE???
    what the form is trying to tell you that you have changed something, do you want to save it?
    I suggest you debug your form and see what's happening step by step.
    Tony

  • Forms Personalization not working after R12 upgrade

    Hi,
    We have recently upgraded to R12. We have forms personalizations on the People, Enter and Maintain form and this is not working now after the R12 upgrade.
    I went to one of the form personalizations and Validated and Applied again but it still did not work. I also created a new one but had no success with that either.
    Any ideas how to get this working again ? Is there something extra that needs to be done for R12?
    Thanks
    Regards,
    Shalantha

    Pl indicate which version of R12 and on what form you had the personalization in the previous version. Have you checked FND_FORM_CUSTOM_% tables to ensure that the personalization survived the upgrade ?
    Pl see if these MOS Docs can help
    Forms Personalizations Unavailable After Upgrade To 12.1.x          (Doc ID 1245864.1)
    Forms Personalization Not Working After Upgrade To R12.1.3          (Doc ID 1309458.1)
    Form Personalization Value Field Not Being Retained After Upgrade          (Doc ID 1266265.1)
    Do Personalizations Holdup After A Patch Is Applied? (Doc ID 1286576.1)
    HTH
    Srini

  • My sound system does not work AFTER installing pc to tv wireless connection

    my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • Script does not work after download

    Hi,
       I have build a form in SAP enviornment using Adobe Life Cycle designer, while designing I have been using XML datasource and wrote scripts for different events on the elements of the form, the script works perfectly fine while designing, but fails when downloaded through an application. I downloaded form and to check if the scripts are still there or not, the script was present, but would not simply execute, for ex. while on clicking of button, certain fields on the form are to be hidden, but this would not work.
    ex. this.parent.parent.StaticText39.presence
    = "hidden";this.parent.parent.STELL_STEXT.presence
    = "hidden";
    The above scripts work perfect durong designing the form, but would not work after form is downloaded through an applciation. Could any one have answer to wierd behaviour?
    Regards,
    Shishir.P

    Was the form saved as a dynamic XML form?
    While the default preview in LiveCycle Designer may be set to dynamic XML form, thus providing the dynamic behaviour you are seeking, if the form is not saved as a dynamic XML form Adobe Reader and Acrobat will not respect the changes to the presence property at run-time.
    Steve

  • HP Photosmart C6300 printer/scanner not working after Snow Leopard install

    HP Photosmart C6300 printer/scanner not working after Snow Leopard install
    Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

    Keith,
    I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

  • Is it possible to test a text in a Oracle ebs form ...?plz help me..

    Hello,
    Is it possible to test a text in a Oracle ebs form ...?
    If possible then please tell me. It is working in Http /web based application.
    and table test is possible.. in Oracle ebs form?. Is it possible to capture a data from a text field and make comparison to check it. Though i want it all to be done in Oracle Ebs forms .
    Please help me..
    Regards
    Srinivas
    Edited by: 850579 on Apr 26, 2011 7:30 AM

    Hi,
    Thank u Alex i have tested with object test its working. I have got the result. can u tell me is it possible to insert table test in oracle ebs forms.
    can we insert iteration in the middle of the script.
    Regards
    Srinivas

  • Forms not displaying after ATG 7 patch

    Forms not displaying after ATG 7 patch., 11i Linux OS.
    6241631

    Hi;
    AFAIK no, i also cant see this info at below doc
    About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7) [ID 783600.1]
    Please check upper note below part and be sure you have all those steps on your issue:
    -Known Issues
    -Instructions for Applying Oracle Applications Technology Update for 11i.ATG_PF.H.delta.7
    -Implementation and User Documentation
    Regard
    Helios

  • Oracle event alert not activated after fndload to new environment

    Hi,
    Oracle event alert not activated after fndload to new instance, it works in the development instance, checked that the SQL should return row, any hints please.
    Thanks,
    CY

    Please post the details of the application release, database version and OS.
    What was the command used to download/upload the alert?
    Please see if the following docs help.
    Alert Is Not Working After Uploading By FNDLOAD (Doc ID 1087572.1)
    How to transfer alert definition from One Instance to another instance using cmdline script (Doc ID 400295.1)
    How can you move an Oracle Alert from one instance to another from the Operating System level? (Doc ID 376891.1
    Thanks,
    Hussein

  • Tecra M7: Tablet does not work after lid closing

    Has anyone had problems with the tablet not working after closing the lid on a Tecra M7? Bios is 3.20
    Doesn't seem to happen on hibernate or sleep.
    I have the lid set to do nothing on close.

    Hi
    What do you mean with tablet not working after closing the lid?
    Does the notebook freezes or what?? What happens exactly???
    The close the lid settings can be set to hibernation mode or standby mode or no action.
    These settings can be set in the power saver setup actions.
    If you have some problems with some installed Toshiba applications I would recommend reinstalling the TOSHIBA Common Modules and the program which doesnt run correctly!
    Best regards

Maybe you are looking for

  • DrawImage() and multiple classes

    First I should start by saying I am VERY new to Java. I have written a program that uses multiple classes, and i would like to place      boolean b = g.drawImage(cardPics,x2,yPos,50,75),this); in my class. I have passed Graphics g from paint. I am ab

  • Ipod touch usb to firewire

    I know that Apple requires a usb 2 connection between computer and an ipod touch and that firewire is no longer an output on an ipod But can anyone tell me please 1. if I bought an ipod touch could I successfully sync it via usb 1 and an 800mhz imac?

  • PAGES IN OSX 10.8

    I have updated my Macbook Pro to OSX 10.8.  I use Pages for my word processing.  I noted that the "save as" option has been removed.  I do a lot of repeat minutes for organizations and I use a prior copy as the template.  What is the "work around" to

  • Developing plug-in for Indesign CC

    Hi, I am developing a plug-in for Adobe Indesign CC. Based on BasicSelectableDialog plug-in(sample plug-in given in SDK' s folder) i am developing this one. There are 2 panels, Yin and Yang panels are available in BasicSelectableDialog plug-in. I hav

  • Adf11g: Bind params for ViewObject issue

    Hi, In my application I am using VO to generate selectOneChoice. The binding of VO with selectOneChoice is taking lot of time. I am having 12 selectOneChoice which are binded to 12 different VO. And as time taken to bind is too high my page is gettin