Oracle Graphics Builder in Oracle Developer Suite 10g
Dear All,
I would like to immigrate from Oracle Developer 6.0 to Oracle Developer Suite 10g for our company application. I had a design tool called as Graphics Builder in Developer 6.0 but What I see in Oracle Developer Suite 10g that this tool doesn't exist any more. I still need to use all Graphics of the company application.
Is Graphics Builder out of the Developer package of Oracle any more ? If yes, then how can I make the design of Graphics in Developer Suite ? Is it a seperate tool any more I should have next to Developer Suite 10g ?
I would be glad if experinced colleaques guide me on this ?
Many Thanks for your valuable helps,
Regards,
Meriç
Is Graphics Builder out of the Developer package of Oracle any more ?Yes, Oracle has discontinued the "Graphics Builder product. In order to include graphical charts in your 10g Form you will need to use the BI Graph Bean that is included in the <a href="http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html">Oracle Forms 11g Downloads</a> - Oracle Forms 11g Demo Pack. Download this .zip file and look at the *demos.html* document for instructions on how to use this Java Bean.
Hope this helps,
Craig B-)
+If someone's response is helpful or correct, please mark it accordingly.+
Similar Messages
-
How to connect Oracle Form Builder - Oracle Developer Suite 10g - Windows 7
Hi brothers and sisters,
Hope all you are fine. I have installed Oracle Developer Suite 10g on Windows 7 successfully and it is working properly. But when I connect to Oracle Form Builder using Connect window asking:
a. User Name
b. Password
c. Database
a message box appear: 'ORA-12154: TNS:could not resolve the connect identifier specified'
I verify my Connect String with: 'SELECT * FROM v$database', but the problem remain the same.
Please help me how can I connect to Oracle Form Builder.
Noorhi
plz use Net Configuration Assistant or set tnsnames.ora with connect string and computer name.
Net Configuration Assistant.
when its opened then go to .
*Local Net Service Name Configuration.
*Click Next.
*Add.
*Click Next.
* Service Name--Type here connect String which is XE or any Connect String.
*TCP.
*Click Next.
*Host Name--Enter here Computer name or Ip address.
*Yes,Perform a test.
you can enter correct password and username here.
Note:- your Database should be Up if its not Up it will through the same error so plz startup your database first.
sarah -
How to configure webutil 1.06 with oracle Developer suite 10g R2
Hello everyone,
My computer configuration is
OS-> Windows 7 Ultimate (32-bit)
RAM-> 1GB
I have successfully installed oracle XE and developer suite 10g R2 in my computer. Now i want to configure webutil. Please give me the step-by-step procedure for it.
Thanks in advance.hi
plz search this forum u will find so many answered threads anyways.
plz read the following.
Webutil Settings
Requirements
· Download Jacob 1.8 archive and webutil 1.06
(Download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.
webutil can be downloaded from http://otn.oracle.com )
Database Setup
Login as SYS
create user webutil identified by webutil
default tablespace users
temporary tablespace temp;
grant connect, create session, create procedure, create public synonym to webutil;
grant resource, connect to webutil;
grant execute on dbms_lob to webutil;
login as webutl user and run
create_webutil_db.sql
create public synonym webutil_db for webutil.webutil_db;
grant execute on webutil_db to public;
set serveroutput on
declare
a boolean;
begin
a:=webutil_db.closeblob(1);
If a then
dbms_output.put_line('webutil/blob setup '||'TRUE');
else
dbms_output.put_line(' webutil/blob setup '||'FALSE');
end if;
end;
copy jacob.jar and copy frmwebutil.jar to ORACLE_HOME/forms/java directory.
Make sure you can download these using the below
http://machinename.com/forms/java/jacob.jar
http://machinename.com/forms/java/frmwebutil.jar
Create directory webutil under [OraHome]/forms/webutil and .
copy jacob.dll , JNIsharedstubs.dll, d2kwutil.dll
Check the permissions. Read /Execute
Forms.conf AliasMatch ^/forms/webutil/(..*)
$ORACLE_HOME/forms/webutil/$1"
http://machinename.com/forms/webutil/jacob.dll
http://machinename.com/forms/webutil/JNIsharedstubs.dll
http://machinename.com/forms/webutil/d2kwutil.dll
In the default.env update
WEBUTIL_CONFIG=/opt/oracle/product/10gas/forms/server/webutil.cfg
CLASSPATH=c:\temp\webutil\lib\frmwebutil.jar;c:\"Program Files"\Java\j2re1.4.2_06\lib\rt.jar (Include rt.jar)
Also include C:\Dev10g\forms\java\ frmall.jar
Settings for webutil.cfg
logging.file=c:\temp\webutil.log
logging.enabled=TRUE
logging.errorsonly=TRUE
logging.connections=TRUE
transfer.database.enabled=TRUE
transfer.appsrv.enabled=TRUE
transfer.appsrv.workAreaRoot=<Enter Directory /folder on Server>
transfer.appsrv.accessControl=TRUE
transfer.appsrv.read.1=<Enter Directory /folder on Server>
transfer.appsrv.write.1=<Enter Directory /folder on Server>
Entry in the formsweb.cfg
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=on
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=basejpi.htm
baseHTMLjpi=webutiljpi.htm
#archive_jini=frmall_jinit.jar
lookAndFeel=oracle
form=WELCOME.fmx
userid=webutil/Webutil$123@ORCL
width=955
height=545
jpi_download_page=https://java.sun.com/products/archive/j2se/1.4.2_09/index.ht ml
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
jpi_codebase=https://java.sun.com/products/plugin/autodl/jinstall-1_4-windows- i586. cab#Version=1,4,0,0
jpi_mimetype=application/x-java-applet;version=1.4
Sign jacob.jar ( Not mandatory )
Open a DOS command prompt.
Add [OraHome]\jdk\bin to the PATH:
set PATH=[OraHome]\jdk\bin;%PATH%
Sign the file, and check the output for success:
[OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\jacob.jar
[Previously this point stated that frmwebutil.jar also needed to be signed. This is no longer necessary and should not be done.]
Start Forms Builder and connect to a schema in the RDBMS used in step (4).
Open webutil.pll, do a "Compile ALL" (shift-Control-K), and generate to PLX (Control-T).
If the PLX is not generated, the Webutil.pll library would have to be attached with
full path information to all forms wishing to use WebUtil. This is NOT recommended.
Create a new FMB.
Open webutil.olb, and Subclass (not Copy) the Webutil object to the form.
There is no need to Subclass the WebutilConfig object.
Attach the Webutil.pll Library, and remove the path.
Create a new button on a new canvas, with the code
show_webutil_information (TRUE);
in a WHEN-BUTTON-PRESSED trigger.
Compile the FMB to FMX, after doing a Compile-All (Shift-Control-K).
Under Edit->Preferences->Runtime in Forms Builder, click on "Reset to Default" if
the "Application Server URL" is empty.
Then append "?config=webutil" at the end, so you end up with a URL of the form
http://server:port/forms/frmservlet?config=webutil
Compile the webutil.pll and attach it to the fmb. Compile it
Debugging
Clear the browser cache and enable the jinitator / sun java plugin.
For Sun Java Plugin
Start ->Settings ->Control –Panel->Java->Advanced ->Show Java Console
Debugging ->Select All
Clear the plugin cache and once again access the URL. Make sure all the dlls,jar files
are getting downloaded.
FRM-92050 failed to connect to server /forms90/;90serlvet -1
oracle.forms.net,connectionexeption : form session failed during startup.
Java console shows -
When you are not able to download the webutil.jar file
java.lang.ClassNotFoundException:
java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source) at
java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
Cause
Ensure that the ORACLE_HOME in the .Env file points to a correct home.
Frm-40735 when-custom-item-event triger raised unhandled exception ora-06508
Cause
Ported webutil to Unix . The form appears , but when a call is made to webutil
functions, it resulted in the above error .The reason was PLL was not compiled
on unix .
Reference
Metalink Note 418970.1 ORA-06508 When Starting Webutil
Read / Write - image file
The code was not erroring out, but the image was not getting copied in the
image item .
Cause
transfer.appsrv.workAreaRoot=<name of the temp directory >
transfer.appsrv.accessControl=TRUE was not specified in the webutil.cfg file
The root of the location in which WebUtil can store temporary files
uploaded from the client.
While Writing Image file ( remember its the client to which the image
is written to ).
Example
client_image.write_image_file('d:\myimg\','GIF','CTRL.MY_IMG',
maximize_compression, original_depth);
Then ensure that on the thin client , there exist a directory called as "myimg" in the D drive .
One should watch out for the error in the console or the log depending on how
the logging has been set to .In case if the directory does not exist on the
client message appears that cannot create a file ...
These are the steps that occurs -
1) WebUtil creates a working directory that is private to the user
on the applciation server using the value of transfer.appsrv.workAreaRoot
This is that <ipaddress>\<ntuser name> directory
2) The basic forms Write Image file is used to extract a temporary copy
of the image into that directory.
3) The image is downloaded into the client machine and saved as the name
that you specified as the filename in the write_image_file command.
4) The temporary copy of the image held in the workAreaRoot on the Appserver
is cleaned up.
4) Client_host - The command is supposed to run the executable on the client .
But if you are trying to call an exe which is not in the path , you will not
get any error.
Error Message while opening the fmb in the forms builder
Add jacob.jar and frmwebutil.jar to CLASSPATH or FORMS_BUILDER_CLASSPATH ... otherwise there is an error message when opening the canvas in the new created fmb
{code}
hope this helps u.
sarah -
Installed Oracle Developer Suite 10g (9.0.4) in Linux
my system is Linux enterprise 3, update 5 (Kernel 2.4.21-32.ELsmp)
I haved Installed Oracle Developer Suite 10g (9.0.4) by using instruction in Oracle9i Developer Suite Installation for RedHat Install successful.
when I run form builder (oracle_home/bin/f90desm.sh, rwbuilder), it show that:
Segmentation fault
Please help!And how to set RHEL 3 to allow install Oracle
Developer Suite 10g (9.0.4.0.0)?Main documentation link:
http://www.oracle.com/technology/documentation/index.html
Under Development Tools, click Oracle Developer Suite Release 10g (9.0.4), then View Library (Documentation Library for Windows, Linux, Solaris, and HP-UX). The Tab Getting Started has Install guides. -
Problem with Oracle Developer Suite 10g
Hi,
I have installed Oracle Developer Suite 10g. When I try to open the rdf file with the report builder, the error message "REP-0756: Warning: Unable to find PL/SQL library 'SHARE_RP'" shown.
Does anyone know how to resolve this? Thanks!Try this thread: REP-0756: Warning: Unable to find PL/SQL library 'FARSV' and 'fadolif'
-
How to install Oracle Developer Suite 10g on Windows 7 (64-bit)
Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
RegardsBe aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.
-
Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
If possible, Kindly provide me the website link.Pl do not post duplicates
Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
Continue the discussions in your original threads -
Problems installing Oracle Developer Suite 10g in windows 7
Hi Experts;
I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and I couldn't see anything, may be the name is diferent.
Thanks for your help.
AlFirst off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product. While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit). This is a commonly asked question so a search of the forum would have given you several solutions.
The limitations of the Oracle installer are:
1. You must have Administrator rights to install.
2. Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
3. It's unable to recognize Windows Managed virtual memory.
To get around these limitations you must do the following:
1. Modify your Virtual Memory settings and define a specific Min and Max amount. Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
2. You must run the Oracle installer in compatibility mode for Windows XP. To do this,
- Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
3. While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
Now run the Oracle setup.exe and your installation should succeed.
Craig... -
Installation of an Oracle Developer Suite 10g on Windows XP doesnt work
Hello.
I try to instal Oracle Developer Suite 10g on Windows XP. I run setup.exe from DISK1 directory. Universal installer starts and Welcome screen appears. I click "Next" to "Specify file locations" screen. But when I choose Source Path and Destination Name and Path and I click "Next" again, nothing happens. In installation log I can see strange error message. You can see it in part of log bellow:
*** Welcome Page***
Initializing install inventory
Setting up install inventory
*** Specify File Locations Page***
Setting the 'SourceLocation ( FROM_LOCATION )' property to 'C:\xxx\OracleDevSuit\Disk1\stage\products.jar'. Received the value from the UI page.
Setting the 'OracleHome ( ORACLE_HOME )' property to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraClient10g_home1'. Received the value from the UI page.
Initializing OUI access setup
Setting variable 'ORACLE_HOME' to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
Error:*** Alert: null ***
User Selected: Cancel
Can anybody help me? I am very confused about this error message.
Thanks very much.
Petr.Are you logged in as an administrator?
I wouldn't install in Program Files anyway. I'm not sure, but I have a gut feeling that Oracle doesn't like spaces in file and directory names. Install in C:\Oracle directory. -
Install oracle developer suite 10g on ubuntu
Hi,
Is it possible to install oracle developer suite 10g on ubuntu?979155 wrote:
Hi,
Is it possible to install oracle developer suite 10g on ubuntu?Better search at ubuntu forum.
Here one link
1. http://ubuntuforums.org/showthread.php?t=548631
2. http://ubuntuforums.org/showthread.php?t=1393013
3. {thread:id=2432469} {thread:id=669088}
Hope this enough...
Hamid -
How can i install oracle developer suite 10g on centos 5.5
Hello all ,
i would like to install oracle developer suite 10g on centos 5.5
Thank's all :)CentOS is not a supported distro for installing Dev Suite 10g - http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html
Unless you use a certified OS, you are on your own
HTH
Srini -
Want to install Oracle Developer Suite 10g R2 on Windows 7 (64-bit)
Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
RegardsDeveloper Suite 10 is not certified or supported to be installed on Win7 (64bit). Although it can be done, you will have problems later if you manage to get it installed. If you really want to have it on your Win7 laptop, I encourage you to install "Windows XP Mode", which is part of Windows Virtual PC. This is free to licensed Win7 users (does not apply to Home edition). Refer to the following:
http://windows.microsoft.com/en-US/windows7/install-and-use-windows-xp-mode-in-windows-7 -
Oracle Developer Suite 10g on Windows 7
Hi. Does anyone know if running Oracle Developer Suite 10g (10.1.2.0.2) on Windows 7 is supported?
This is a very common question in the Forum. Oracle Developer Suite (ODS) 10g R2 (with patchset 3: 10.1.3.0.2) is supported on Windows 7 32-bit. Last I checked, it was not supported on Windows 7 64-bit. Keep in mind, that this is just for the developer install of ODS. Version 10.1.2.0.2 is not supported, but it will work. Just follow the instructions installing on Windows Vista (search the forum - there are many posts on this topic as well).
The client application is supported on all versions of Windows (32 or 64 bit).
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
Unable to install Oracle Developer Suite 10g on Windows 7
Hello,
I'm getting the following error message when using OUI on the Specify File Locations screen after providing source and destination:
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.
Anyone else have this happen while trying to install? I see that a few people have been successful in getting it installed. The destination was provided by default as C:\Program Files\Oracle\Inventory.
Any help would be appreciated - thanks in advance.The Oracle Developer Suite (ODS) 10g is now certified by Oracle for installation on Windows 7 (32-bit). For installation steps, I recommend you take a look at My Oracle Support article: *How to Install Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) [ID 1292919.1]*. There is no need to run the XP-Mode (Virtual PC) of Windows 7 in order to install and use ODS on Windows 7.
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.This error could be caused by many things. I've seen two. The first (as I recall) was caused by an issue with one of the files in the Inventory directory. We were able to get around the issue by deleting a file (I'm sorry, but I don't recall which file or if we simply deleted the directory). I recommend you check with Oracle Support before you delete any files or the directory, however.
The other issue I've seen cause this is "spaces" in the directory path to the installer. This was the most common cause that I've seen. Make sure there are no spaces in the directory path where the installer is located.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
Using Oracle Developer Suite 10g with the 10g Express Edition Database
I'm new to Oracle and I'm taking an SQL college level course using a text book entitled "Guide to Oracle 10g". Our text book came with Oracle Developer Suite 10g (9.0.4.0.1) but no database. We adopted the 10g Express Edition (XE) as the database. I have both the database and the Developer Suite loaded on Windows XP Pro. I've been using the database for months now and it runs fine and the Developer Suite installed OK.
However, I would like to use some of the Developer Suite apps (for learning purposes) with the database but I can't seem to log on to the database through the Developer apps when I open them and use my 10g XE database user-name and password. For starters, I would like to see if I could use the edition of SQLPlus (release 9.0.1.4.0) that comes with the Developer Suite because it has configuration options that are not available in the SQLPlus command line version that 10g XE contains (which otherwise works fine).
When I open SQLPlus (Developer Suite Version) and try to log on with my database user name and password (and no host string), I get the error:
ORA-12560: TNS:protocol adapter error
I did search the discussion forum first and also reviewed some Oracle pdf's including the concepts pdf but came up empty. I would greatly appreciate any suggestions on how to succeed or a determination of the compatibility of 10g XE with the Developer Suite. Thanks kindly.I think your last idea might be helpful at this point and in case it matters, they are both installed on a sinlge machine (laptop). Thanks in advance:
Here is the Developer Suite tnsnames.ora:
# TNSNAMES.ORA Network Configuration File: C:\DevSuiteHome\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = HOSTNAME)(PORT = 1521))
(CONNECT_DATA =
(SID = PLSExtProc)
Here is the 10G XE tnsnames.ora:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = obw)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)
Maybe you are looking for
-
I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.
-
How do I get my password to work on my iPad2 ? It has worked fine ever since I got in April
How do I get my IPad2 password to work? It has worked fine since I bought it in April
-
Best External HD for backing up?
I want to make a copy of my HD, I have a 120GB HD in my macbook pro 2.2GHz. Can anyone recommend a good, reliable external HD for me to use? Also, what size external. Thanks
-
Rounding - Flash Chart - Stacked Horizontal (Percent)
I have a question about the rounding in the Stacked Horizontal (Percent) Flash Chart I put an example on apex.oracle.com [http://apex.oracle.com/pls/otn/f?p=15:5|http://apex.oracle.com/pls/otn/f?p=15:5] My problem is that the value I should have is n
-
How can i update itunes so i can back up my phone without this popping up? i've tried to update it numerous times over the course of a couple of months but it still won't work! Please help ASAP as i need to back up my phone!