Oracle Grid Infrastructure installation on Windows 2008 SRV R2

Hi
There are many problems to configure and install grid infrastructure in windows 2008 server. is there any step by step documentation for this case?
how can i configure the storage for OCFS, ACFS is not supported on Windows 2008 server. How can i manage OUI setup masks exactly.
Thank you for your helping hand.

Have you looked at the instructions in the documentation? http://download.oracle.com/docs/cd/E11882_01/install.112/e10817/toc.htm
If these steps are not adequate, could you explain what is missing?

Similar Messages

Grid Infrastructure installation on Windows 2008 R2 problem

Hello there,
I tried to install Grid Infra 11gr2 on windows 2008 R2. I followed all the documentation, but i'm unable to install it. It always end with an error at the grid configuration step (OracleOHService ends unexpectedly, ohasd log says "caught exception"). I've got an SR opened, no answer for the moment ...
Did someone a least managed to install grid infra on 2008 R2 ?
It is certified, 2008 R2 is mentioned in the documentation, this is not my first RAC installation on windows (10g, 11gr1 on 2003, 2008 R1). But this time I'm totally stuck.
PS : I love Linux.

Make sure you have the shared storage configured correctly, on either Oracle ASM or OCFS for Windows. In my testing, i used a storage cabinet and iSCSI to connect to the disks.
If you have attempted to install Grid once, then before attempting another installation, you must clean out the failed installation (http://download.oracle.com/docs/cd/E11882_01/install.112/e10817/rem_orcl.htm#CHDGBBIJ) and zero out the disks used by Oracle ASM. Also, use the asmtool to mark the disks so that Oracle ASM can identify them correctly.
Also, make sure that Microsoft Clustering is disabled (and preferably not installed) on the servers you are using in your Oracle cluster.
Most of the time, a failed installation is due to the shared storage not being configured correctly, or being configured so that it works during installation of Oracle Grid, but once the server is restarted, Oracle Grid fails to start.

How do I define 2 disk groups for ocr and voting disks at the oracle grid infrastructure installation window

Hello,
It may sound too easy to someone but I need to ask it anyway.
I am in the middle of building Oracle RAC 11.2.0.3 on Linux. I have 2 storage and I created three LUNs in each of storage so 6 LUNs in total look in both of servers. If I choose NORMAL as a redundancy level, is it right to choose my 6 disks those are created for OCR_VOTE at the grid installation? Or should I choose only 3 of them and configure mirroring at latter stage?
The reason why I am asking this is that I didn't find any place to create asm disk group for ocr and voting disks at the oracle grid infrastructure installation window. In fact, I would to like to create two disk groups in which one of groups contains three disks those were brought from storage 1 and the second one contains rest three 3 disk that come from the last storage.
I believe that you will understand the manner and help me on choosing proper way.
Thank you.

Hi,
You have 2 Storage H/W.
You will need to configure a Quorum ASMDisk to store a Voting Disk.
Because if you lose 1/2 or more of all of your voting disks, then nodes get evicted from the cluster, or nodes kick themselves out of the cluster.
You must have the odd number of voting disk (i.e 1,3 or 5) one voting disk per ASM DISK, So 1 Storage will hold more voting disk than another storage.
(e.g 3 Voting Disk - 2 voting stored in stg-A and 1 voting disk store in stg-B)
If fail the storage that hold the major number of Voting disk the whole cluster (all nodes) goes down. Does not matter if you have a other storage online.
It will happen:
https://forums.oracle.com/message/9681811#9681811
You must configure your Clusterware same as RAC extended
Check this link:
http://www.oracle.com/technetwork/database/clusterware/overview/grid-infra-thirdvoteonnfs-131158.pdf
Explaining: How to store OCR, Voting disks and ASM SPFILE on ASM Diskgroup (RAC or RAC Extended) | Levi Pereira | Oracl…

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

Oracle Grid infrastructure installation tutorial

Dear friends who can help me by providing some link for Oracle Grid infrastructure installation
tutorial. I need installation procedure description with GNS, SCAN as well as DNS and DHCP
configuration for Grid Infra. I already searched in NET and can't found same exhaustive instructions.
I just want to compare my and others installations ways.
I hope see your comments soon.
thanks in advance

ora_tech wrote:
Hi,
Refer blog post by Guenadi Jilevski:
http://gjilevski.wordpress.com/2011/10/05/build-two-node-oracle-rac-11gr2-11-2-0-3-with-gns-dns-dhcp-and-haip/
This might be helpful :)
thanks,
X A H E E Rthanks for quick answer :)

Oracle grid infrastructure installation take long time on step 15 (perform prerequisite checks )

Oracle grid infrastructure installation take long time on step 15 (perform prerequisite checks )
I'm starting install and configure Oracle RAC 11gR2 on redhat 6.3 , when i reached step 15 (perform prerequisite checks ) it's taking long time more than 10 hours and still checking .... i closed it and start installation again it's same still waiting in perform prerequisite checks 75% complete
it is normal ?? what should i do ?? how i can monitoring installation steps and why this step take all this time please help .

Pl identify which exact version of 11gR2 - currently only 11.2.0.3 is certified/supported on Linux 6.x - Oracle&reg; Database - if you are using 11.2.0.1 or 11.2.0.2, then you will need to use Linux 5.x
HTH
Srini

Grid infrastructure with GNS @ windows 2008 R2

hello!
i want to install grid infrastructure (for a 2 node rac) with gns on a windows 2008 r2 server. the dns/dhcp server is also windows 2008 r2. can anyone provide an example which ips, dns-forwards etc. i have to configure on the dns/dhcp server? i read a lot of documentation, but the installation always fails with the following message:
"GNS konnte nicht hinzugefügt werden. -- gns couldn't be added
CLSGN-00154: Ungültige Subdomain: "ora-cluster.ki-grp.local" -- invalid subdomain "..."
add gns -i 10.62.1.50 -d ora-cluster.ki-grp.local ... failed
FirstNode configuration failed at C:\Oracle\11.2.0\grid\crs\install/crsconfig_lib.pm line 8385."
i enter the following parameters at universal installer:
Cluster-Name: ora-cluster
SCAN-Name: ora-cluster-scan.ora-cluster.ki-grp.local
SCAN-Port: 1521
GNS-Subdomain: ora-cluster.ki-grp.local
GNS-VIP-Adresse: 10.62.1.50
cluster-nodes: 000srvorarn1.ki-grp.local und 000srvorarn2.ki-grp.local
network interfaces:
interconnect: 1.1.1.0
public: 10.62.1.0
thx in advance and best regards,
christian

Make sure you have the shared storage configured correctly, on either Oracle ASM or OCFS for Windows. In my testing, i used a storage cabinet and iSCSI to connect to the disks.
If you have attempted to install Grid once, then before attempting another installation, you must clean out the failed installation (http://download.oracle.com/docs/cd/E11882_01/install.112/e10817/rem_orcl.htm#CHDGBBIJ) and zero out the disks used by Oracle ASM. Also, use the asmtool to mark the disks so that Oracle ASM can identify them correctly.
Also, make sure that Microsoft Clustering is disabled (and preferably not installed) on the servers you are using in your Oracle cluster.
Most of the time, a failed installation is due to the shared storage not being configured correctly, or being configured so that it works during installation of Oracle Grid, but once the server is restarted, Oracle Grid fails to start.

Oracle Grid Infrastructure for Windows.

Hi, i am very new to Oracle world, please forgive me if my question is too silly.
I am currently practice Oracle on my Windows 2008 server. When i try to install ASM, i found i have to install 'Oracle Grid Infrastructure'. ok, i went o Oracle download page, i found the 'Oracle Grid Infrastructure 11g Release 2 (11.2.0.1.0)'. But it only has Linux\Solaris\HP-UX\AIX\zLinux to choose from. Where can I found the Windows version?

new4oracle wrote:
Hi, i am very new to Oracle world, please forgive me if my question is too silly.
I am currently practice Oracle on my Windows 2008 server. When i try to install ASM, i found i have to install 'Oracle Grid Infrastructure'. ok, i went o Oracle download page, i found the 'Oracle Grid Infrastructure 11g Release 2 (11.2.0.1.0)'. But it only has Linux\Solaris\HP-UX\AIX\zLinux to choose from. Where can I found the Windows version?edelivery.oracle.com
Select the media pack for your version of oracle. When you drill down there will be several zip files for download. the first two are for the database, the third is ASM/GI

I cannot find Oracle Grid Infrastructure Patch Set 2 for windows x64

So maybe i'm stupid, but i've searched metalink every way i can think of to find the patches mentioned in the following preinstall instructions for 11.2.0.2 for windows
"To upgrade Oracle Grid Infrastructure release 11.2.0.1 to Oracle Grid Infrastructure release 11.2.0.2, you must first do at least one of the following:
* Patch the Oracle Grid Infrastructure release 11.2.0.1 home with the patch 9413827 and patch 9706490.
* Install Oracle Grid Infrastructure Patch Set 1 (GI PSU1) or Oracle Grid Infrastructure Patch Set 2 (GI PSU2)."
I've searched in Patches and Updates and https://updates.oracle.com.
I've got a 2 node 11gR2 (11.2.0.1) RAC on Windows 2k8 that i want to patch to 11.2.0.2 before implementing as production. I can find all the Unix flavored patches, but not the Windows Patch.
Feel free to make fun of me for using Windoze or not knowing how to use metalink, whatever you like, as long as you include a url to the Patch I'm looking for.
thanks
John

The first thing that i tried was the out-of-place upgrade, which failed 3/4 of the way through. This left me with a circumstance where i couldn't use srvctl to administer my RAC because of version mismatched files. The RAC appeared to be up but administering it was impossible no matter what home i set. I deinstalled 11.2.0.2 grid and the 2nd node of my RAC was broken and couldn't see the ASM instance at all. i actually had to modify the windows registry to get the 2nd node to behave properly.
That's when i read more carefully the installation instructions for the upgrade and came across the text i included.
"To upgrade Oracle Grid Infrastructure release 11.2.0.1 to Oracle Grid Infrastructure release 11.2.0.2, you must first do at least one of the following:
Patch the Oracle Grid Infrastructure release 11.2.0.1 home with the patch 9413827 and patch 9706490.
Install Oracle Grid Infrastructure Patch Set 1 (GI PSU1) or Oracle Grid Infrastructure Patch Set 2 (GI PSU2).
Adding nodes to a cluster during a rolling upgrade is not supported.#
Oracle Clusterware and Oracle ASM upgrades are always out-of-place upgrades. With Oracle Grid Infrastructure 11g release 2 (11.2), you cannot perform an in-place upgrade of Oracle Clusterware and Oracle ASM to existing homes."
This mentions both the out-of-place upgrade and the need for the intermediate patches to be installed first. I'm not sure what to believe at this point. I read the above instructions as saying the intermediate patches need to be installed BEFORE the out-of-place upgrade would be successful, but i can't say that i understand why that would be the case.
Has someone done a successful upgrade on Windows from 11.2.0.1 directly to 11.2.0.2?
I appreciate y'all's help.
thanks,
JR

Oracle ebs installation on windows 2008 R2

Hi Hussein,
I am doing oracle EBS installation on windows 2008. As per installation doc below are the pre-requisite
The Prerequisites Software are:
1.Chose and Operating System windows 2008 (32 bit):
Select the Windows Operating system and install it. After installed OS successfully need to change DNS entries or Active Directories as per your environment.
2.Install the Microsoft Visual C++ 2008 software.
See the post for installation of – Microsoft Visual C++ 2008
3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
See the post for installation of – MKS Toolkit.
I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
Regards,
Raj

hi Raj
3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
See the post for installation of – MKS Toolkit.
I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
Yes go for cygwin
please see
Using Cygwin to Maintain Oracle E-Business Suite Release 12 on Windows[Article ID 414992.1]
Oracle E-Business Suite R12 Installation Steps on Windows XP
;) AppsMAstI :)
Sharing is Caring

Grid Infrastructure installable for Oracle Restart only (No ASM)?

Hello,
Can Oracle Grid Infrastructure be installed for its Oracle Restart functionality only? i.e., No ASM,; this box uses local RAID 5 filesystems only.
This is a standalone 32-bit RHEL 5 system with Oracle Database 10gR2 already installed that I intend to upgrade to 11gR2. Just experimenting with installing Grid Infrastructure for only its restart capability. There isn't anything out there I've found that addresses this other than the Oracle doc stating that the Infrastructure must be installed if I want to use ASM or Oracle Restart.
I'm currently in the installer in a Software Only installation waiting for my SysAdmin to run the root.sh script, but in looking at this script, it looks like it might try to do things with CRS, voting files and the like, which do not exist.
Thank you!
-Jon

Hi Erik,
Can Oracle Grid Infrastructure be installed for its Oracle Restart functionality only? Yes ... you can do that installing Software Only
I'm currently in the installer in a Software Only installation waiting for my SysAdmin to run the root.sh script, but in looking at this script, it looks like it might try to do things with CRS, voting files and the like, which do not exist.Don't worry about that ... at the end of the execution of the root.sh script will report a proceedings to configure only Oracle Restart.
Only this resource "ora.evmd" will appear online.
Regards,
Levi Pereira

Assistance needed during Oracle 11G R2 client installations in Windows 2008

Hi,
I am installing Oracle 11G R2 client in Windows 2008 R2 enterprise server. It has JR6 installed. But whenever I am launching the installer from OUI, I am getting the error 'Java: “Could not find the main class. Program will exit” and the installation is getting terminated. Any inputs/suggestions will be great for me.
Thanks in advance.

Hi,
are you able to run java manually? I.e. java --help in the cmd? Are your environment variables (JAVA_HOME) set properly?

Oracle documentation for Installation for Oracle Grid Infrastructure

Hi
I want to install 11g Release 2 "Oracle Grid Infrastrucure" on Aix system without Cluster/RAC option. The requirement is to configure ASM on an Standalone system without any Cluster and RAC. Is there any documentation available for this installation.
I have already checked the below link which provide information on Installation for Oracle Grid Infrastructure for a Cluster.
http://download.oracle.com/docs/cd/E11882_01/install.112/e10814/toc.htm
Please let know if there is any documentation for Installation for Oracle Grid Infrastructure for a standalone system.

Hi there. Well, the installation of Grid Infrastructure would ask you that what kind of installation you want to do, single instance or cluster? If you would choose single instance installation, it would not be much different from doing any other oracle installation. The key factor to do it and why its mandatory is because from 11.2 onwards, ASM can't be managed from DBCA but from its own tool only, ASMCA and that runs from Grid Home. So I don't think that not finding the docs should be a show stopper for you. I haven't done it on AIX so I am not sure that I can be of some help about it. I have done it on OEL 5 and it didn't throw any issues for me.
HTH
Aman....

Problem with installation of Oracle Grid Infrastructure failed on Oracle Linux 6.4 x86_64

Hello!
I try install Oracle Grid Infrastructure 11.2.0.1. OS - OEL 6.4 x86_64
But running script "/u01/app/oracle/product/11.2.0/grid/root.sh" failed:
[root@localhost grid]# /u01/app/oracle/product/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
    ORACLE_OWNER= grid
    ORACLE_HOME= /u01/app/oracle/product/11.2.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
   Copying dbhome to /usr/local/bin ...
   Copying oraenv to /usr/local/bin ...
   Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2013-07-03 01:27:08: Checking for super user privileges
2013-07-03 01:27:08: User has super user privileges
2013-07-03 01:27:08: Parsing the host name
Using configuration parameter file: /u01/app/oracle/product/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'grid', privgrp 'oinstall'..
Operation successful.
CRS-4664: Node localhost successfully pinned.
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /u01/app/oracle/product/11.2.0/grid/crs/install/roothas.pl line 296.
/u01/app/oracle/product/11.2.0/grid/cfgtoollogs/crsconfig/roothas.log:
2013-07-03 01:27:08: The configuration parameter file /u01/app/oracle/product/11.2.0/grid/crs/install/crsconfig_params is valid
2013-07-03 01:27:08: Checking for super user privileges
2013-07-03 01:27:08: User has super user privileges
2013-07-03 01:27:08: ### Printing the configuration values from files:
2013-07-03 01:27:08:    /u01/app/oracle/product/11.2.0/grid/crs/install/crsconfig_params
2013-07-03 01:27:08:    /u01/app/oracle/product/11.2.0/grid/crs/install/s_crsconfig_defs
2013-07-03 01:27:08: ASM_DISCOVERY_STRING=
2013-07-03 01:27:08: ASM_DISKS=ORCL:ASMDATA01,ORCL:ASMDATA02,ORCL:ASMDATA03,ORCL:ASMDATA04
2013-07-03 01:27:08: ASM_DISK_GROUP=DATA
2013-07-03 01:27:08: ASM_REDUNDANCY=NORMAL
2013-07-03 01:27:08: ASM_SPFILE=
2013-07-03 01:27:08: ASM_UPGRADE=false
2013-07-03 01:27:08: CLSCFG_MISSCOUNT=
2013-07-03 01:27:08: CLUSTER_GUID=
2013-07-03 01:27:08: CLUSTER_NAME=
2013-07-03 01:27:08: CRS_NODEVIPS=
2013-07-03 01:27:08: CRS_STORAGE_OPTION=0
2013-07-03 01:27:08: CSS_LEASEDURATION=400
2013-07-03 01:27:08: DIRPREFIX=
2013-07-03 01:27:08: DISABLE_OPROCD=0
2013-07-03 01:27:08: EMBASEJAR_NAME=oemlt.jar
2013-07-03 01:27:08: EWTJAR_NAME=ewt3.jar
2013-07-03 01:27:08: EXTERNAL_ORACLE_BIN=/opt/oracle/bin
2013-07-03 01:27:08: GNS_ADDR_LIST=
2013-07-03 01:27:08: GNS_ALLOW_NET_LIST=
2013-07-03 01:27:08: GNS_CONF=false
2013-07-03 01:27:08: GNS_DENY_ITF_LIST=
2013-07-03 01:27:08: GNS_DENY_NET_LIST=
2013-07-03 01:27:08: GNS_DOMAIN_LIST=
2013-07-03 01:27:08: GPNPCONFIGDIR=/u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:08: GPNPGCONFIGDIR=/u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:08: GPNP_PA=
2013-07-03 01:27:08: HELPJAR_NAME=help4.jar
2013-07-03 01:27:08: HOST_NAME_LIST=
2013-07-03 01:27:08: ID=/etc/init.d
2013-07-03 01:27:08: INIT=/sbin/init
2013-07-03 01:27:08: IT=/etc/inittab
2013-07-03 01:27:08: JEWTJAR_NAME=jewt4.jar
2013-07-03 01:27:08: JLIBDIR=/u01/app/oracle/product/11.2.0/grid/jlib
2013-07-03 01:27:08: JREDIR=/u01/app/oracle/product/11.2.0/grid/jdk/jre/
2013-07-03 01:27:08: LANGUAGE_ID=AMERICAN_AMERICA.AL32UTF8
2013-07-03 01:27:08: MSGFILE=/var/adm/messages
2013-07-03 01:27:08: NETCFGJAR_NAME=netcfg.jar
2013-07-03 01:27:08: NETWORKS=
2013-07-03 01:27:08: NEW_HOST_NAME_LIST=
2013-07-03 01:27:08: NEW_NODEVIPS=
2013-07-03 01:27:08: NEW_NODE_NAME_LIST=
2013-07-03 01:27:08: NEW_PRIVATE_NAME_LIST=
2013-07-03 01:27:08: NODELIST=
2013-07-03 01:27:08: NODE_NAME_LIST=
2013-07-03 01:27:08: OCFS_CONFIG=
2013-07-03 01:27:08: OCRCONFIG=/etc/oracle/ocr.loc
2013-07-03 01:27:08: OCRCONFIGDIR=/etc/oracle
2013-07-03 01:27:08: OCRID=
2013-07-03 01:27:08: OCRLOC=ocr.loc
2013-07-03 01:27:08: OCR_LOCATIONS=
2013-07-03 01:27:08: OLASTGASPDIR=/etc/oracle/lastgasp
2013-07-03 01:27:08: OLRCONFIG=/etc/oracle/olr.loc
2013-07-03 01:27:08: OLRCONFIGDIR=/etc/oracle
2013-07-03 01:27:08: OLRLOC=olr.loc
2013-07-03 01:27:08: OPROCDCHECKDIR=/etc/oracle/oprocd/check
2013-07-03 01:27:08: OPROCDDIR=/etc/oracle/oprocd
2013-07-03 01:27:08: OPROCDFATALDIR=/etc/oracle/oprocd/fatal
2013-07-03 01:27:08: OPROCDSTOPDIR=/etc/oracle/oprocd/stop
2013-07-03 01:27:08: ORACLE_BASE=/u01/app/oracle
2013-07-03 01:27:08: ORACLE_HOME=/u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:08: ORACLE_OWNER=grid
2013-07-03 01:27:08: ORA_ASM_GROUP=asmadmin
2013-07-03 01:27:08: ORA_DBA_GROUP=oinstall
2013-07-03 01:27:08: PRIVATE_NAME_LIST=
2013-07-03 01:27:08: RCALLDIR=/etc/rc.d/rc0.d /etc/rc.d/rc1.d /etc/rc.d/rc2.d /etc/rc.d/rc3.d /etc/rc.d/rc4.d /etc/rc.d/rc5.d /etc/rc.d/rc6.d
2013-07-03 01:27:08: RCKDIR=/etc/rc.d/rc0.d /etc/rc.d/rc1.d /etc/rc.d/rc2.d /etc/rc.d/rc4.d /etc/rc.d/rc6.d
2013-07-03 01:27:08: RCSDIR=/etc/rc.d/rc3.d /etc/rc.d/rc5.d
2013-07-03 01:27:08: RC_KILL=K19
2013-07-03 01:27:08: RC_KILL_OLD=K96
2013-07-03 01:27:08: RC_START=S96
2013-07-03 01:27:08: SCAN_NAME=
2013-07-03 01:27:08: SCAN_PORT=0
2013-07-03 01:27:08: SCRBASE=/etc/oracle/scls_scr
2013-07-03 01:27:08: SHAREJAR_NAME=share.jar
2013-07-03 01:27:08: SILENT=false
2013-07-03 01:27:08: SO_EXT=so
2013-07-03 01:27:08: SRVCFGLOC=srvConfig.loc
2013-07-03 01:27:08: SRVCONFIG=/var/opt/oracle/srvConfig.loc
2013-07-03 01:27:08: SRVCONFIGDIR=/var/opt/oracle
2013-07-03 01:27:08: VNDR_CLUSTER=false
2013-07-03 01:27:08: VOTING_DISKS=
2013-07-03 01:27:08: ### Printing other configuration values ###
2013-07-03 01:27:08: CLSCFG_EXTRA_PARMS=
2013-07-03 01:27:08: CRSDelete=0
2013-07-03 01:27:08: HAPatch=0
2013-07-03 01:27:08: HAS_GROUP=oinstall
2013-07-03 01:27:08: HAS_USER=grid
2013-07-03 01:27:08: HOST=localhost
2013-07-03 01:27:08: IS_SIHA=1
2013-07-03 01:27:08: OLR_DIRECTORY=/u01/app/oracle/product/11.2.0/grid/cdata/localhost
2013-07-03 01:27:08: OLR_LOCATION=/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr
2013-07-03 01:27:08: ORA_CRS_HOME=/u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:08: SUPERUSER=root
2013-07-03 01:27:08: UPGRADE=
2013-07-03 01:27:08: crscfg_trace=1
2013-07-03 01:27:08: crscfg_trace_file=/u01/app/oracle/product/11.2.0/grid/cfgtoollogs/crsconfig/roothas.log
2013-07-03 01:27:08: hahome=
2013-07-03 01:27:08: hosts=
2013-07-03 01:27:08: osdfile=/u01/app/oracle/product/11.2.0/grid/crs/install/s_crsconfig_defs
2013-07-03 01:27:08: parameters_valid=1
2013-07-03 01:27:08: paramfile=/u01/app/oracle/product/11.2.0/grid/crs/install/crsconfig_params
2013-07-03 01:27:08: platform_family=unix
2013-07-03 01:27:08: srvctl_trc_suff=0
2013-07-03 01:27:08: user_is_superuser=1
2013-07-03 01:27:08: ### Printing of configuration values complete ###
2013-07-03 01:27:08: Oracle CRS stack is not configured yet
2013-07-03 01:27:08: CRS is not yet configured. Hence, will proceed to configure CRS
2013-07-03 01:27:10: OLR location = /u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr
2013-07-03 01:27:10: Oracle CRS Home = /u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:10: Validating /etc/oracle/olr.loc file for OLR location /u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr
2013-07-03 01:27:10: /etc/oracle/olr.loc already exists. Backing up /etc/oracle/olr.loc to /etc/oracle/olr.loc.orig
2013-07-03 01:27:10: Opening file OCRCONFIG
2013-07-03 01:27:10: Opening file OCRCONFIG
2013-07-03 01:27:10: create Local Only OCR...
2013-07-03 01:27:10: create Local Only OCR on Linux...
2013-07-03 01:27:10: OCR locations = /u01/app/oracle/product/11.2.0/grid/cdata/localhost/local.ocr
2013-07-03 01:27:10: Validating OCR locations in /etc/oracle/ocr.loc
2013-07-03 01:27:10: Checking for existence of /etc/oracle/ocr.loc
2013-07-03 01:27:10: Backing up /etc/oracle/ocr.loc to /etc/oracle/ocr.loc.orig
2013-07-03 01:27:10: Setting ocr location /u01/app/oracle/product/11.2.0/grid/cdata/localhost/local.ocr
2013-07-03 01:27:10: Creating or upgrading Oracle Local Registry (OLR)
2013-07-03 01:27:10: Running as user grid: /u01/app/oracle/product/11.2.0/grid/bin/ocrconfig -local -upgrade
2013-07-03 01:27:10:   Invoking "/u01/app/oracle/product/11.2.0/grid/bin/ocrconfig -local -upgrade" as user "grid"
2013-07-03 01:27:11: OLR successfully created or upgraded
2013-07-03 01:27:11: /u01/app/oracle/product/11.2.0/grid/bin/clscfg -localadd
2013-07-03 01:27:11: Running as user grid: /u01/app/oracle/product/11.2.0/grid/bin/clscfg -localadd
2013-07-03 01:27:11:   Invoking "/u01/app/oracle/product/11.2.0/grid/bin/clscfg -localadd" as user "grid"
2013-07-03 01:27:11: Keys created in the OLR successfully
2013-07-03 01:27:12: Creating local-only OCR (/u01/app/oracle/product/11.2.0/grid/bin/crsctl pin css -n localhost) ... succeeded
2013-07-03 01:27:12: Registering ohasd
2013-07-03 01:27:12: init file = /u01/app/oracle/product/11.2.0/grid/crs/init/init.ohasd
2013-07-03 01:27:12: Copying file /u01/app/oracle/product/11.2.0/grid/crs/init/init.ohasd to /etc/init.d directory
2013-07-03 01:27:12: Setting init.ohasd permission in /etc/init.d directory
2013-07-03 01:27:12: init file = /u01/app/oracle/product/11.2.0/grid/crs/init/ohasd
2013-07-03 01:27:12: Copying file /u01/app/oracle/product/11.2.0/grid/crs/init/ohasd to /etc/init.d directory
2013-07-03 01:27:12: Setting ohasd permission in /etc/init.d directory
2013-07-03 01:27:12: Removing "/etc/rc.d/rc3.d/S96ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc3.d/S96ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc5.d/S96ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc5.d/S96ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc0.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc0.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc1.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc1.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc2.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc2.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc4.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc4.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc6.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc6.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: The file ohasd has been successfully linked to the RC directories
2013-07-03 01:27:12: Starting ohasd
2013-07-03 01:27:12: itab entries=
2013-07-03 01:27:18: Created backup /etc/inittab.no_crs
2013-07-03 01:27:18: Appending to /etc/inittab.tmp:
2013-07-03 01:27:18: h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
2013-07-03 01:27:18: Done updating /etc/inittab.tmp
2013-07-03 01:27:18: Saved /etc/inittab.crs
2013-07-03 01:27:18: Installed new /etc/inittab
2013-07-03 01:29:18: ohasd failed to start: Inappropriate ioctl for device
2013-07-03 01:29:18: ###### Begin DIE Stack Trace ######
2013-07-03 01:29:18:     Package         File                 Line Calling
2013-07-03 01:29:18:     --------------- -------------------- ---- ----------
2013-07-03 01:29:18: 1: main            roothas.pl            166 crsconfig_lib::dietrap
2013-07-03 01:29:18: 2: main            roothas.pl            296 main::__ANON__
2013-07-03 01:29:18: ####### End DIE Stack Trace #######
selinux and firewall is disabled.

Hi,
Refer the below metalink note :- OHASD Failed to Start: Inappropriate ioctl for device [ID 1069182.1]
Thanks

Oracle Grid Infrastructure 11g Release 2 (11.2.0.3.0)

Hi,
I want to download Oracle Grid Infrastructure 11g Release 2 (11.2.0.3.0) for installation on Oracle Solaris 11 as Oracle Grid Infrastructure 11g Release 2 (11.2.0.1.0) cannot be installed on Solaris 11,
I know its available but cannot find the link to download it, is it not available for download from OTN network ?
If you happen to know the link please let me know or is there a way I can install 11.2.0.1.0 on Solaris 11.
Thank you for you help.
Rgds
Terry

11/10/11: Patch Set 11.2.0.3 for Linux, Solaris, Windows, AIX and HP-UX Itanium is now available on support.oracle.com.
You have to ask support to send you the cloud link where you can download the binaries OR you can ask them to send you the media also.
It says right on the above link
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html

Oracle Grid Infrastructure installation on Windows 2008 SRV R2

Similar Messages

Maybe you are looking for