Oracle GRID Installation
Hello Everyone,
We are planning for a Oracle DB Upgrade and it includes several other upgrades as well including storage, hardware, OS and SAP etc.
In the process we need to install the Oracle Grid. As per the SAP recommended installation we should use /oracle directory for the oracle, but oracle is saying to go for /opt directory for this. For the information we will be using RHEL 6 and Oracle 11.2.0.4 Grid. Is it going to create some issue in future and what about the BRTools*. Have anyone faced this situation before?
Thanks.
Kind Regards
Anand
Hi Anand,
Please refer to below SAP note for configuration
1932366 - Configuration of an Oracle Grid Administrator Account
Follow SAP suggestions as it would be useful in future from support perspective.
Hope this helps.
Regards,
Deepak Kori
Similar Messages
-
Configure ASM for oracle Grid installation
Hi,
I do not know how to configure ASM for oracle grid infrastructure. As i tried to install oracle grid infrastructure says [INS - 30507] Empty ASM disk group.
I have to configure Asm before installing 11g R2. Please let me know what i have to do and provide the steps to configure and administer asm.
Thanks in advance.http://docs.oracle.com/cd/E11882_01/install.112/e24660.pdf
ORACLE-BASE - Oracle Database 11g Release 2 RAC On Oracle Linux 5.8 Using VirtualBox -
Oracle Grid Installer cannot list available disks
Hi all,
I'm trying to install Oracle Database 11g R2 64-bit with ASM on an Oracle Enterprise Linux 5.5 64-bit.
The problem I'm facing is that the Grid Infrastructure Installer cannot list available disks. In the setp of creating Diskgroups, I only see blank disk.
Following the main actions I took:
[root@srv07 ~]# fdisk /dev/sdb
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1638, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-1638, default 1638):
Using default value 1638
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@srv07 ~]# rpm -qa | grep oracleasm
oracleasm-support-2.1.3-1.el5
oracleasm-2.6.18-194.el5-2.0.5-1.el5
[root@srv07 ~]# oracleasm configure -i
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface [grid]:
Default group to own the driver interface [asmdba]:
Start Oracle ASM library driver on boot (y/n) [y]:
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
[root@srv07 ~]# /usr/sbin/oracleasm createdisk DISK1 /dev/sdb1
Writing disk header: done
Instantiating disk: done
[root@srv07 ~]# /usr/sbin/oracleasm listdisks
DISK1
[root@srv07 ~]# /usr/sbin/oracleasm scandisks
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...The log generated by the Installer can be viwed from: http://www.ahmedbaraka.com/temp/infralog.txt
Any guideline is appreciated.Hi Srini,
I have tried as you mentioned like installing Java in C:\Java... and I have tried the by setting the JRE_LOCATION of local path. No use of it.
tried with -jreloc and setting the java path in environment variables too.
As I understand, the problem i have seen at files copied path is not expected as required. Please see the path below...
C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-06_03-36-31PM\jre\bin\javaw.exe.
After running the Setup.exe -deinstall... temporary folder is creating with timestamp and all the required files are coping here...
"jre" folder also created and copied required java files directly into jre folder, but not in jre\bin folder.
folder path is like this
C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-06_03-36-31PM\jre\javaw.exe.
Setup application is expecting jre\bin\javaw.exe, but folder structure is created as jre\javaw.exe. There it is coming the issue.
I have even tried with copying all the files into bin folder and executed the setup.exe, it again creating a new temporary file
not able to resolve it... -
ASM installation failure from Oracle GRID under Windows 7 64 bit
I am a rookie..I am running Oracle database 11gR2 running on a Windows 7 64 bit system.
I am implementing ASM onto my system solely for learning purposes
The implementation of ASM has changed between database releases 11gR1 and 11gR2 such that it is no longer configured locally but is now implemented from within Oracle GRID. Unfortunately, the book I am using to study my OCP from was written at the time of 11gR1 so I can no longer follow its instructions to create and configure ASM. Instead of using DBCA I now need to use ASMCA to configure ASM.
As a preliminary requirement I successfully installed Oracle Grid and configured it to run on my standalone server.
I created two partitions on my harddrive ...... drive G: and drive H: with intent of using them as my ASM disks. 45 Gig and 50 gig in size respectively formatted with the NTFS filesystem.
I ran ASMCA in an attempt to create an ASM instance
I specified these partition drives '\\.\G:' and '\\.\H:' in the disk discovery path which were successfully picked up.
However when ASMCA executed the creation process after some time it failed with the following message:
One or more diskgroup(s) creation failed as below:
DiskGroup mydisks creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-00600: internal error code, arguments: [17090], [], [], [], [], [], [], [], [], [], [], []
Check C:\app\peter\cfgtoollogs\asmca\asmca-12101712AM0558.log for details.
Which I did and found many things
Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logInfo:141] Oradim Command : C:\app\11.2.0\grid\bin\oradim.exe -new -asmsid +ASM -startmode manual -srvcstart demand -spfile
[Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logEntry:113] Entering oracle.sysman.assistants.usmca.util.UsmcaUtil Method : executeCommand
[Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logInfo:141] Command: C:\app\11.2.0\grid\bin\oradim.exe -new -asmsid +ASM -startmode manual -srvcstart demand -spfile
[Thread-40] [ 2012-10-17 00:25:07.254 EST ] [UsmcaLogger.logInfo:141] Instance created.
Ok. As above the ASM instance appeared to have been successfully created so as part of my investigative process to confirm what the script actually did successfully execute I attempted to log into the ASM instance to see how far it would get. It fails with the following result
C:\Windows\system32>set ORACLE_SID=+ASM
C:\Windows\system32>sqlplus sys as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Wed Oct 17 10:16:36 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I checked Windows Task Manager
There is an OracleOHService and it is running
LISTENER is running ie the local listener running on port 1521 that was originally created with a previous basic stand alone installation of the Oracle 11gR2 database . (ie before I installed Oracle GRID). No other listeners are running.
Can t see any evidence of any ASM service on Windows Task manager started/stopped or otherwise. Neither can I see evidence of a CSS service.
The log file that was generated is large I am not clear on what I should be looking for in order to find clues as to how I might manually resolve this problem and possibly 'salvage' the installation. Any advice would be appreciated.Hi,
read the documentation:
http://www.oracle.com/pls/db112/to_pdf?pathname=install.112/e24169.pdf
and you will find multiple errors, you probably did.
Especially the part on preparing storage.
Regards
Sebastian -
Hello,
It may sound too easy to someone but I need to ask it anyway.
I am in the middle of building Oracle RAC 11.2.0.3 on Linux. I have 2 storage and I created three LUNs in each of storage so 6 LUNs in total look in both of servers. If I choose NORMAL as a redundancy level, is it right to choose my 6 disks those are created for OCR_VOTE at the grid installation? Or should I choose only 3 of them and configure mirroring at latter stage?
The reason why I am asking this is that I didn't find any place to create asm disk group for ocr and voting disks at the oracle grid infrastructure installation window. In fact, I would to like to create two disk groups in which one of groups contains three disks those were brought from storage 1 and the second one contains rest three 3 disk that come from the last storage.
I believe that you will understand the manner and help me on choosing proper way.
Thank you.Hi,
You have 2 Storage H/W.
You will need to configure a Quorum ASMDisk to store a Voting Disk.
Because if you lose 1/2 or more of all of your voting disks, then nodes get evicted from the cluster, or nodes kick themselves out of the cluster.
You must have the odd number of voting disk (i.e 1,3 or 5) one voting disk per ASM DISK, So 1 Storage will hold more voting disk than another storage.
(e.g 3 Voting Disk - 2 voting stored in stg-A and 1 voting disk store in stg-B)
If fail the storage that hold the major number of Voting disk the whole cluster (all nodes) goes down. Does not matter if you have a other storage online.
It will happen:
https://forums.oracle.com/message/9681811#9681811
You must configure your Clusterware same as RAC extended
Check this link:
http://www.oracle.com/technetwork/database/clusterware/overview/grid-infra-thirdvoteonnfs-131158.pdf
Explaining: How to store OCR, Voting disks and ASM SPFILE on ASM Diskgroup (RAC or RAC Extended) | Levi Pereira | Oracl… -
Oracle documentation for Installation for Oracle Grid Infrastructure
Hi
I want to install 11g Release 2 "Oracle Grid Infrastrucure" on Aix system without Cluster/RAC option. The requirement is to configure ASM on an Standalone system without any Cluster and RAC. Is there any documentation available for this installation.
I have already checked the below link which provide information on Installation for Oracle Grid Infrastructure for a Cluster.
http://download.oracle.com/docs/cd/E11882_01/install.112/e10814/toc.htm
Please let know if there is any documentation for Installation for Oracle Grid Infrastructure for a standalone system.Hi there. Well, the installation of Grid Infrastructure would ask you that what kind of installation you want to do, single instance or cluster? If you would choose single instance installation, it would not be much different from doing any other oracle installation. The key factor to do it and why its mandatory is because from 11.2 onwards, ASM can't be managed from DBCA but from its own tool only, ASMCA and that runs from Grid Home. So I don't think that not finding the docs should be a show stopper for you. I haven't done it on AIX so I am not sure that I can be of some help about it. I have done it on OEL 5 and it didn't throw any issues for me.
HTH
Aman.... -
Oracle Grid infrastructure installation tutorial
Dear friends who can help me by providing some link for Oracle Grid infrastructure installation
tutorial. I need installation procedure description with GNS, SCAN as well as DNS and DHCP
configuration for Grid Infra. I already searched in NET and can't found same exhaustive instructions.
I just want to compare my and others installations ways.
I hope see your comments soon.
thanks in advanceora_tech wrote:
Hi,
Refer blog post by Guenadi Jilevski:
http://gjilevski.wordpress.com/2011/10/05/build-two-node-oracle-rac-11gr2-11-2-0-3-with-gns-dns-dhcp-and-haip/
This might be helpful :)
thanks,
X A H E E Rthanks for quick answer :) -
Oracle grid infrastructure installation take long time on step 15 (perform prerequisite checks )
I'm starting install and configure Oracle RAC 11gR2 on redhat 6.3 , when i reached step 15 (perform prerequisite checks ) it's taking long time more than 10 hours and still checking .... i closed it and start installation again it's same still waiting in perform prerequisite checks 75% complete
it is normal ?? what should i do ?? how i can monitoring installation steps and why this step take all this time please help .Pl identify which exact version of 11gR2 - currently only 11.2.0.3 is certified/supported on Linux 6.x - Oracle&reg; Database - if you are using 11.2.0.1 or 11.2.0.2, then you will need to use Linux 5.x
HTH
Srini -
Hello!
I try install Oracle Grid Infrastructure 11.2.0.1. OS - OEL 6.4 x86_64
But running script "/u01/app/oracle/product/11.2.0/grid/root.sh" failed:
[root@localhost grid]# /u01/app/oracle/product/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/oracle/product/11.2.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2013-07-03 01:27:08: Checking for super user privileges
2013-07-03 01:27:08: User has super user privileges
2013-07-03 01:27:08: Parsing the host name
Using configuration parameter file: /u01/app/oracle/product/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'grid', privgrp 'oinstall'..
Operation successful.
CRS-4664: Node localhost successfully pinned.
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /u01/app/oracle/product/11.2.0/grid/crs/install/roothas.pl line 296.
/u01/app/oracle/product/11.2.0/grid/cfgtoollogs/crsconfig/roothas.log:
2013-07-03 01:27:08: The configuration parameter file /u01/app/oracle/product/11.2.0/grid/crs/install/crsconfig_params is valid
2013-07-03 01:27:08: Checking for super user privileges
2013-07-03 01:27:08: User has super user privileges
2013-07-03 01:27:08: ### Printing the configuration values from files:
2013-07-03 01:27:08: /u01/app/oracle/product/11.2.0/grid/crs/install/crsconfig_params
2013-07-03 01:27:08: /u01/app/oracle/product/11.2.0/grid/crs/install/s_crsconfig_defs
2013-07-03 01:27:08: ASM_DISCOVERY_STRING=
2013-07-03 01:27:08: ASM_DISKS=ORCL:ASMDATA01,ORCL:ASMDATA02,ORCL:ASMDATA03,ORCL:ASMDATA04
2013-07-03 01:27:08: ASM_DISK_GROUP=DATA
2013-07-03 01:27:08: ASM_REDUNDANCY=NORMAL
2013-07-03 01:27:08: ASM_SPFILE=
2013-07-03 01:27:08: ASM_UPGRADE=false
2013-07-03 01:27:08: CLSCFG_MISSCOUNT=
2013-07-03 01:27:08: CLUSTER_GUID=
2013-07-03 01:27:08: CLUSTER_NAME=
2013-07-03 01:27:08: CRS_NODEVIPS=
2013-07-03 01:27:08: CRS_STORAGE_OPTION=0
2013-07-03 01:27:08: CSS_LEASEDURATION=400
2013-07-03 01:27:08: DIRPREFIX=
2013-07-03 01:27:08: DISABLE_OPROCD=0
2013-07-03 01:27:08: EMBASEJAR_NAME=oemlt.jar
2013-07-03 01:27:08: EWTJAR_NAME=ewt3.jar
2013-07-03 01:27:08: EXTERNAL_ORACLE_BIN=/opt/oracle/bin
2013-07-03 01:27:08: GNS_ADDR_LIST=
2013-07-03 01:27:08: GNS_ALLOW_NET_LIST=
2013-07-03 01:27:08: GNS_CONF=false
2013-07-03 01:27:08: GNS_DENY_ITF_LIST=
2013-07-03 01:27:08: GNS_DENY_NET_LIST=
2013-07-03 01:27:08: GNS_DOMAIN_LIST=
2013-07-03 01:27:08: GPNPCONFIGDIR=/u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:08: GPNPGCONFIGDIR=/u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:08: GPNP_PA=
2013-07-03 01:27:08: HELPJAR_NAME=help4.jar
2013-07-03 01:27:08: HOST_NAME_LIST=
2013-07-03 01:27:08: ID=/etc/init.d
2013-07-03 01:27:08: INIT=/sbin/init
2013-07-03 01:27:08: IT=/etc/inittab
2013-07-03 01:27:08: JEWTJAR_NAME=jewt4.jar
2013-07-03 01:27:08: JLIBDIR=/u01/app/oracle/product/11.2.0/grid/jlib
2013-07-03 01:27:08: JREDIR=/u01/app/oracle/product/11.2.0/grid/jdk/jre/
2013-07-03 01:27:08: LANGUAGE_ID=AMERICAN_AMERICA.AL32UTF8
2013-07-03 01:27:08: MSGFILE=/var/adm/messages
2013-07-03 01:27:08: NETCFGJAR_NAME=netcfg.jar
2013-07-03 01:27:08: NETWORKS=
2013-07-03 01:27:08: NEW_HOST_NAME_LIST=
2013-07-03 01:27:08: NEW_NODEVIPS=
2013-07-03 01:27:08: NEW_NODE_NAME_LIST=
2013-07-03 01:27:08: NEW_PRIVATE_NAME_LIST=
2013-07-03 01:27:08: NODELIST=
2013-07-03 01:27:08: NODE_NAME_LIST=
2013-07-03 01:27:08: OCFS_CONFIG=
2013-07-03 01:27:08: OCRCONFIG=/etc/oracle/ocr.loc
2013-07-03 01:27:08: OCRCONFIGDIR=/etc/oracle
2013-07-03 01:27:08: OCRID=
2013-07-03 01:27:08: OCRLOC=ocr.loc
2013-07-03 01:27:08: OCR_LOCATIONS=
2013-07-03 01:27:08: OLASTGASPDIR=/etc/oracle/lastgasp
2013-07-03 01:27:08: OLRCONFIG=/etc/oracle/olr.loc
2013-07-03 01:27:08: OLRCONFIGDIR=/etc/oracle
2013-07-03 01:27:08: OLRLOC=olr.loc
2013-07-03 01:27:08: OPROCDCHECKDIR=/etc/oracle/oprocd/check
2013-07-03 01:27:08: OPROCDDIR=/etc/oracle/oprocd
2013-07-03 01:27:08: OPROCDFATALDIR=/etc/oracle/oprocd/fatal
2013-07-03 01:27:08: OPROCDSTOPDIR=/etc/oracle/oprocd/stop
2013-07-03 01:27:08: ORACLE_BASE=/u01/app/oracle
2013-07-03 01:27:08: ORACLE_HOME=/u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:08: ORACLE_OWNER=grid
2013-07-03 01:27:08: ORA_ASM_GROUP=asmadmin
2013-07-03 01:27:08: ORA_DBA_GROUP=oinstall
2013-07-03 01:27:08: PRIVATE_NAME_LIST=
2013-07-03 01:27:08: RCALLDIR=/etc/rc.d/rc0.d /etc/rc.d/rc1.d /etc/rc.d/rc2.d /etc/rc.d/rc3.d /etc/rc.d/rc4.d /etc/rc.d/rc5.d /etc/rc.d/rc6.d
2013-07-03 01:27:08: RCKDIR=/etc/rc.d/rc0.d /etc/rc.d/rc1.d /etc/rc.d/rc2.d /etc/rc.d/rc4.d /etc/rc.d/rc6.d
2013-07-03 01:27:08: RCSDIR=/etc/rc.d/rc3.d /etc/rc.d/rc5.d
2013-07-03 01:27:08: RC_KILL=K19
2013-07-03 01:27:08: RC_KILL_OLD=K96
2013-07-03 01:27:08: RC_START=S96
2013-07-03 01:27:08: SCAN_NAME=
2013-07-03 01:27:08: SCAN_PORT=0
2013-07-03 01:27:08: SCRBASE=/etc/oracle/scls_scr
2013-07-03 01:27:08: SHAREJAR_NAME=share.jar
2013-07-03 01:27:08: SILENT=false
2013-07-03 01:27:08: SO_EXT=so
2013-07-03 01:27:08: SRVCFGLOC=srvConfig.loc
2013-07-03 01:27:08: SRVCONFIG=/var/opt/oracle/srvConfig.loc
2013-07-03 01:27:08: SRVCONFIGDIR=/var/opt/oracle
2013-07-03 01:27:08: VNDR_CLUSTER=false
2013-07-03 01:27:08: VOTING_DISKS=
2013-07-03 01:27:08: ### Printing other configuration values ###
2013-07-03 01:27:08: CLSCFG_EXTRA_PARMS=
2013-07-03 01:27:08: CRSDelete=0
2013-07-03 01:27:08: HAPatch=0
2013-07-03 01:27:08: HAS_GROUP=oinstall
2013-07-03 01:27:08: HAS_USER=grid
2013-07-03 01:27:08: HOST=localhost
2013-07-03 01:27:08: IS_SIHA=1
2013-07-03 01:27:08: OLR_DIRECTORY=/u01/app/oracle/product/11.2.0/grid/cdata/localhost
2013-07-03 01:27:08: OLR_LOCATION=/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr
2013-07-03 01:27:08: ORA_CRS_HOME=/u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:08: SUPERUSER=root
2013-07-03 01:27:08: UPGRADE=
2013-07-03 01:27:08: crscfg_trace=1
2013-07-03 01:27:08: crscfg_trace_file=/u01/app/oracle/product/11.2.0/grid/cfgtoollogs/crsconfig/roothas.log
2013-07-03 01:27:08: hahome=
2013-07-03 01:27:08: hosts=
2013-07-03 01:27:08: osdfile=/u01/app/oracle/product/11.2.0/grid/crs/install/s_crsconfig_defs
2013-07-03 01:27:08: parameters_valid=1
2013-07-03 01:27:08: paramfile=/u01/app/oracle/product/11.2.0/grid/crs/install/crsconfig_params
2013-07-03 01:27:08: platform_family=unix
2013-07-03 01:27:08: srvctl_trc_suff=0
2013-07-03 01:27:08: user_is_superuser=1
2013-07-03 01:27:08: ### Printing of configuration values complete ###
2013-07-03 01:27:08: Oracle CRS stack is not configured yet
2013-07-03 01:27:08: CRS is not yet configured. Hence, will proceed to configure CRS
2013-07-03 01:27:10: OLR location = /u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr
2013-07-03 01:27:10: Oracle CRS Home = /u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:10: Validating /etc/oracle/olr.loc file for OLR location /u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr
2013-07-03 01:27:10: /etc/oracle/olr.loc already exists. Backing up /etc/oracle/olr.loc to /etc/oracle/olr.loc.orig
2013-07-03 01:27:10: Opening file OCRCONFIG
2013-07-03 01:27:10: Opening file OCRCONFIG
2013-07-03 01:27:10: create Local Only OCR...
2013-07-03 01:27:10: create Local Only OCR on Linux...
2013-07-03 01:27:10: OCR locations = /u01/app/oracle/product/11.2.0/grid/cdata/localhost/local.ocr
2013-07-03 01:27:10: Validating OCR locations in /etc/oracle/ocr.loc
2013-07-03 01:27:10: Checking for existence of /etc/oracle/ocr.loc
2013-07-03 01:27:10: Backing up /etc/oracle/ocr.loc to /etc/oracle/ocr.loc.orig
2013-07-03 01:27:10: Setting ocr location /u01/app/oracle/product/11.2.0/grid/cdata/localhost/local.ocr
2013-07-03 01:27:10: Creating or upgrading Oracle Local Registry (OLR)
2013-07-03 01:27:10: Running as user grid: /u01/app/oracle/product/11.2.0/grid/bin/ocrconfig -local -upgrade
2013-07-03 01:27:10: Invoking "/u01/app/oracle/product/11.2.0/grid/bin/ocrconfig -local -upgrade" as user "grid"
2013-07-03 01:27:11: OLR successfully created or upgraded
2013-07-03 01:27:11: /u01/app/oracle/product/11.2.0/grid/bin/clscfg -localadd
2013-07-03 01:27:11: Running as user grid: /u01/app/oracle/product/11.2.0/grid/bin/clscfg -localadd
2013-07-03 01:27:11: Invoking "/u01/app/oracle/product/11.2.0/grid/bin/clscfg -localadd" as user "grid"
2013-07-03 01:27:11: Keys created in the OLR successfully
2013-07-03 01:27:12: Creating local-only OCR (/u01/app/oracle/product/11.2.0/grid/bin/crsctl pin css -n localhost) ... succeeded
2013-07-03 01:27:12: Registering ohasd
2013-07-03 01:27:12: init file = /u01/app/oracle/product/11.2.0/grid/crs/init/init.ohasd
2013-07-03 01:27:12: Copying file /u01/app/oracle/product/11.2.0/grid/crs/init/init.ohasd to /etc/init.d directory
2013-07-03 01:27:12: Setting init.ohasd permission in /etc/init.d directory
2013-07-03 01:27:12: init file = /u01/app/oracle/product/11.2.0/grid/crs/init/ohasd
2013-07-03 01:27:12: Copying file /u01/app/oracle/product/11.2.0/grid/crs/init/ohasd to /etc/init.d directory
2013-07-03 01:27:12: Setting ohasd permission in /etc/init.d directory
2013-07-03 01:27:12: Removing "/etc/rc.d/rc3.d/S96ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc3.d/S96ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc5.d/S96ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc5.d/S96ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc0.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc0.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc1.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc1.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc2.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc2.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc4.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc4.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc6.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc6.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: The file ohasd has been successfully linked to the RC directories
2013-07-03 01:27:12: Starting ohasd
2013-07-03 01:27:12: itab entries=
2013-07-03 01:27:18: Created backup /etc/inittab.no_crs
2013-07-03 01:27:18: Appending to /etc/inittab.tmp:
2013-07-03 01:27:18: h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
2013-07-03 01:27:18: Done updating /etc/inittab.tmp
2013-07-03 01:27:18: Saved /etc/inittab.crs
2013-07-03 01:27:18: Installed new /etc/inittab
2013-07-03 01:29:18: ohasd failed to start: Inappropriate ioctl for device
2013-07-03 01:29:18: ###### Begin DIE Stack Trace ######
2013-07-03 01:29:18: Package File Line Calling
2013-07-03 01:29:18: --------------- -------------------- ---- ----------
2013-07-03 01:29:18: 1: main roothas.pl 166 crsconfig_lib::dietrap
2013-07-03 01:29:18: 2: main roothas.pl 296 main::__ANON__
2013-07-03 01:29:18: ####### End DIE Stack Trace #######
selinux and firewall is disabled.Hi,
Refer the below metalink note :- OHASD Failed to Start: Inappropriate ioctl for device [ID 1069182.1]
Thanks -
Oracle Grid Agent Installation
Can I install Oracle Grid Agent 10.2.0.5.0 on IBM Itaniam 64bit machine with Linux 4.7 Cent OS
You can, and you can get it working, but remember that CentOS is not certified by Oracle, so you might run into trouble, but it will work ... on the other hand, you can run Oracle products on many system that are not certified, but the result might not be as good as if you would have a Oracle certified system, like free Oracle linux ...
-
Hi Oracle Experts,
I am trying to setup a new GRID Standalone Infrastructure on a previously installed Oracle 11g database.
It runs all fine but when prompts to run the root.sh script it does not allow to proceed as it prompts to overwrite the existing path for /usr/bin/local
well, I google'd and tried with overwrite : Y . It prompted to run the script but it failed ...
Could you please help me on this ..
[root@asm ~]# /u01/app/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
To configure Grid Infrastructure for a Stand-Alone Server run the following command as the root user:
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/roothas.pl
[root@asm ~]# /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/ crs/install/roothas.pl
2015-03-18 01:42:25: Checking for super user privileges
2015-03-18 01:42:25: User has super user privileges
2015-03-18 01:42:25: Parsing the host name
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'oracle', privgrp 'oinstall'..
Operation successful.
CRS-4664: Node asm successfully pinned.
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
acfsroot: ACFS-9320: Missing advmutil.
acfsroot: ACFS-9320: Missing advmutil.bin.
acfsroot: ACFS-9320: Missing fsck.acfs.
acfsroot: ACFS-9320: Missing fsck.acfs.bin.
acfsroot: ACFS-9320: Missing mkfs.acfs.
acfsroot: ACFS-9320: Missing mkfs.acfs.bin.
acfsroot: ACFS-9320: Missing mount.acfs.
acfsroot: ACFS-9320: Missing mount.acfs.bin.
acfsroot: ACFS-9320: Missing acfsdbg.
acfsroot: ACFS-9320: Missing acfsdbg.bin.
acfsroot: ACFS-9320: Missing acfsutil.
acfsroot: ACFS-9320: Missing acfsutil.bin.
acfsroot: ACFS-9301: ADVM/ACFS installation can not proceed:
acfsroot: ACFS-9302: No installation files found at /u01/app/11.2.0/grid/install/usm/EL5/x86_64/2.6.18-8/2.6.18-8.el5xen-x86_64/bin.
asm 2015/03/18 01:43:06 /u01/app/11.2.0/grid/cdata/asm/backup_20150318_014306.olr
Successfully configured Oracle Grid Infrastructure for a Standalone Server
when I checked for ASM instance its not running ... but just ohasd service and nothing else ..
[root@asm grid]# ps -ef | grep pmon
oracle 5831 1 0 01:15 ? 00:00:01 ora_pmon_db11g1
root 12625 8794 0 02:30 pts/2 00:00:00 grep pmon
[root@asm grid]#
[root@asm grid]#
[root@asm grid]# ps -ef | grep d.bin
oracle 12643 1 5 02:30 ? 00:00:00 /u01/app/11.2.0/grid/bin/ohasd.bin reboot
root 12715 8794 0 02:30 pts/2 00:00:00 grep d.bin
[root@asm grid]#
Could you please help .hi,
The issue not with /usr/bin/local. When you excute root.sh, it will try configure the ASM with New GRID HOME. Issue started, whent tried to start
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting <<=================================================================
acfsroot: ACFS-9320: Missing advmutil.
Please let us know the below details
==> Acfs is configured the servers??
==>acfsutil registry
acfsutil info fs output.
==> With out ASM instance , How the database, CRS STarted ???
==> Please try stop and start the crs.
==> crsctl query crs activeversion output
Regards
Krishnan -
Hi All,
I am currently trying to install the 11gR2 grid infra for cluster , First i ran the cluvfy i got the issue " exectask could not be retrieved from node "saixlab52"
" then i tried to started while installing i am getting "Internal error" and installation got aborted , below is the error i am getting in the logfiles , i have checked the first node oifcfg is there ... second node the file is not there ... seems it's not copying to the remote node ..
pls provide me any of the suggestions ..
======================================
Checking node reachability...
Check: Node reachability from node "saixlab51"
Destination Node Reachable?
saixlab52 yes
saixlab51 yes
Result: Node reachability check passed from node "saixlab51"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
saixlab52 passed
saixlab51 passed
Result: User equivalence check passed for user "oracle"
Version of exectask could not be retrieved from node "saixlab52"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
saixlab51 passed
=========================================
===================================
NFO: All remote nodes are configured for passwordless SSH connectivity
INFO: Validating Public nodes for user equivalence
INFO: Validating Hostnames for nodes
INFO: Validating node readiness
INFO: Checking for node liveliness
INFO: Validating Public Hosts for User Equivalence
INFO: Validating for 9.2, 10gR1 or Local CSS
INFO: Setting public and VIP node info to the bean
INFO: Validating Public And Private Interfaces Across Cluster Nodes
INFO: Validating Node VIPs
INFO: Completed validating state <CRSNodeInformationUI>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getSubnetInformation
INFO: Collecting interface information for node saixlab51
INFO: Collecting interface information for node saixlab52
INFO: Creating scratch path on node saixlab52
INFO: Created scratch path on node saixlab52
INFO: Copying oifcfg to node saixlab52
INFO: A cluster operation has failed while collecting interface information on node saixlab52: Message: error: No such file or directory, file: '/tmp/OraInstall2011-03-18_11-30-52AM/ext/bin/oifcfg' :failed
INFO: Removing scratch path from node saixlab52
SEVERE: [FATAL] [INS-00001] Unknown irrecoverable error
CAUSE: No additional information available.
ACTION: Refer to the logs or contact Oracle Support Services.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:679
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Grid Infrastructure
====================================
Regards
KamalHi,
Thanks for your reply !!
But the cksum values seems fine .. no problem .
Regards
Kamal -
Two questions on ASM for Grid Installation
Grid Infrastructure version : 11.2.0.3
Platform : Oracle Enterprise Linux 5.6
Question1.
oracle:dba will be owner of our Grid software (not grid user). What should be permission set for LUNs ( /dev/sda1, ..) before the grid installation ?
Question2.
Currently, the shared LUNs appear as
/dev/sdb ,
/dev/sdc,
/dev/sdd
does a single partition need to be created before presenting LUN to ASM ?
For example, I should choose p (primary partition ) below. Right ?
# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x8b157fd2.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): c
DOS Compatibility flag is not set
Command (m for help): u
Changing display/entry units to sectors
Command (m for help): n
Command action
e extended
p primary partition (1-4)Check the step 5 here.You use oracleasm utility which changes permission.
Installing Grid Infrastructure for a Standalone Server
Ta
Jag -
RAC - Oracle Grid Infrastructure configure failed
Hi, am trying to install 2 node RAC on Oracle VMs. Before the installation during the -preinst check there were few issues which were resolved (ex user equivalence). After that during the installation process of the Grid it failed at step "Configure Oracle Grid Infrastructure for a cluster". After it failed at this step, subsequent steps too failed which I asked OUI to ignore and then I ran both the post installation scripts. And then ran post crsinst which failed. Pasting below the output of the root.sh script, post crsinst and other checks.
[root@bsfrac01 grid]# sh root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2011-02-13 00:11:55: Parsing the host name
2011-02-13 00:11:55: Checking for super user privileges
2011-02-13 00:11:55: User has super user privileges
Using configuration parameter file: /u01/app/11.2/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'bsfrac01'
CRS-2672: Attempting to start 'ora.mdnsd' on 'bsfrac01'
CRS-2676: Start of 'ora.mdnsd' on 'bsfrac01' succeeded
CRS-2676: Start of 'ora.gipcd' on 'bsfrac01' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'bsfrac01'
CRS-2676: Start of 'ora.gpnpd' on 'bsfrac01' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'bsfrac01'
CRS-2676: Start of 'ora.cssdmonitor' on 'bsfrac01' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'bsfrac01'
CRS-2672: Attempting to start 'ora.diskmon' on 'bsfrac01'
CRS-2676: Start of 'ora.diskmon' on 'bsfrac01' succeeded
CRS-2676: Start of 'ora.cssd' on 'bsfrac01' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'bsfrac01'
CRS-2676: Start of 'ora.ctssd' on 'bsfrac01' succeeded
ASM created and started successfully.
DiskGroup DATA1 created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'bsfrac01'
CRS-2676: Start of 'ora.crsd' on 'bsfrac01' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 0ea2052d8a714fd7bf46d9d5c785483e.
Successfully replaced voting disk group with +DATA1.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 0ea2052d8a714fd7bf46d9d5c785483e (ORCL:DISK1) [DATA1]
Located 1 voting disk(s).
*Failed to rmtcopy "/tmp/filekRIMbG" to "/u01/app/11.2/grid/gpnp/manifest.txt" for nodes {bsfrac01,bsfrac02}, rc=256*
*Failed to rmtcopy "/u01/app/11.2/grid/gpnp/bsfrac01/profiles/peer/profile.xml" to "/u01/app/11.2/grid/gpnp/profiles/peer/profile.xml" for nodes {bsfrac01,bsfrac02}, rc=256*
rmtcopy aborted
Failed to promote local gpnp setup to other cluster nodes
CRS-2673: Attempting to stop 'ora.crsd' on 'bsfrac01'
CRS-2677: Stop of 'ora.crsd' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'bsfrac01'
CRS-2677: Stop of 'ora.asm' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'bsfrac01'
CRS-2677: Stop of 'ora.ctssd' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'bsfrac01'
CRS-2677: Stop of 'ora.cssdmonitor' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'bsfrac01'
CRS-2677: Stop of 'ora.cssd' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'bsfrac01'
CRS-2677: Stop of 'ora.gpnpd' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'bsfrac01'
CRS-2677: Stop of 'ora.gipcd' on 'bsfrac01' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'bsfrac01'
CRS-2677: Stop of 'ora.mdnsd' on 'bsfrac01' succeeded
Initial cluster configuration failed. See /u01/app/11.2/grid/cfgtoollogs/crsconfig/rootcrs_bsfrac01.log for details
[root@bsfrac01 grid]#
[oracle@bsfrac01 bin]$ ./cluvfy stage -post crsinst -n bsfrac01,bsfrac02 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "bsfrac01"
Destination Node Reachable?
bsfrac01 yes
bsfrac02 yes
Result: Node reachability check passed from node "bsfrac01"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
bsfrac01 passed
bsfrac02 passed
Result: User equivalence check passed for user "oracle"
ERROR:
PRKC-1094 : Failed to retrieve the active version of crs: {0}
Checking time zone consistency...
Time zone consistency check passed.
ERROR:
PRKC-1093 : Failed to retrieve the version of crs software on node "java.io.IOException: /u01/app/11.2.0/grid/bin/crsctl: not found
" : {1}
ERROR:
Cluster manager integrity check failed
PRVF-5434 : Cannot identify the current CRS software version
UDev attributes check for OCR locations started...
Result: UDev attributes check passed for OCR locations
UDev attributes check for Voting Disk locations started...
ERROR:
PRVF-5197 : Failed to retrieve voting disk locationsPRKC-1092 : Failed to retrieve the location of votedisks: java.io.IOException: /u01/app/11.2.0/grid/bin/crsctl: not found
Result: UDev attributes check failed for Voting Disk locations
Check default user file creation mask
Node Name Available Required Comment
bsfrac01 0022 0022 passed
bsfrac02 0022 0022 passed
Result: Default user file creation mask check passed
Checking cluster integrity...
Node Name
bsfrac01
Cluster integrity check failed This check did not run on the following node(s):
bsfrac02
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations
ERROR:
PRKC-1094 : Failed to retrieve the active version of crs: {0}
ERROR:
PRVF-5300 : Failed to retrieve active version for CRS on this node
OCR integrity check failed
Checking CRS integrity...
ERROR:
PRKC-1094 : Failed to retrieve the active version of crs: {0}
ERROR:
PRVF-5300 : Failed to retrieve active version for CRS on this node
CRS integrity check failed
OCR detected on ASM. Running ACFS Integrity checks...
Starting check to see if ASM is running on all cluster nodes...
PRVF-5137 : Failure while checking ASM status on node "bsfrac01"
PRVF-5137 : Failure while checking ASM status on node "bsfrac02"
Starting Disk Groups check to see if at least one Disk Group configured...
PRVF-5112 : An Exception occurred while checking for Disk Groups
PRVF-5114 : Disk Group check failed. No Disk Groups configured
Task ACFS Integrity check failed
Checking Oracle Cluster Voting Disk configuration...
ERROR:
PRKC-1093 : Failed to retrieve the version of crs software on node "java.io.IOException: /u01/app/11.2.0/grid/bin/crsctl: not found
" : {1}
ERROR:
PRVF-5434 : Cannot identify the current CRS software version
PRVF-5431 : Oracle Cluster Voting Disk configuration check failed
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
bsfrac01 does not exist passed
bsfrac02 does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@bsfrac01 bin]$ /u01/app/11.2/grid/bin/ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 3
Total space (kbytes) : 262120
Used space (kbytes) : 408
Available space (kbytes) : 261712
ID : 1671840043
Device/File Name : +DATA1
Device/File integrity check succeeded
Device/File not configured
Device/File not configured
Device/File not configured
Device/File not configured
Cluster registry integrity check succeeded
Logical corruption check bypassed due to non-privileged user
ASM looks to be up and running..
[oracle@bsfrac01 bin]$ /usr/sbin/oracleasm listdisks
DISK1
DISK2
DISK3
DISK4
DISK5
DISK6
[oracle@bsfrac01 bin]$ /usr/sbin/oracleasm status
Checking if ASM is loaded: yes
Checking if /dev/oracleasm is mounted: yes
Please help.before installation have u configure the private interconnect on both the nodes to same network adapter..
for example on node 1 if the private interconnect is on eth0 then on the node 2 it should use eth0 only...
for private interconnect use the hostonly option on both the nodes in the network configuration page of the vmware or virtual box..
and for public network it can be bridged
more over if you are installing on the laptop its good to configure the SSH using the OUI.. rather than doing it manually.. as it saves time
the private and the public networks should not have same range of ip address. like if public address are like 192.168.2.222/255.255.255.0 and private address have to be different like 10.10.1.2/255.0.0.0 (this is just an example)
have to configured the NTP.
any ways try installing the oracle rac on virtual box follow the steps given the below website they are pretty straight forward...
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php -
11.2.0.2 Grid Installation for a Standalone Server FAILED!
OS: OEL-5.5 x86_64 (kernel-2.6.18-194.17.4.0.1.el5, glibc-2.5-49.el5_5.7)
Product: Oracle 11gR2 (11.2.0.2.0) x86_64 for Linux
Hi,
I was trying to perform a clean and full 11.2.0.2 installation for a Standalone Server (Single database + ASM + Restart), but unlike 11.2.0.1, this standalone patch, shipped as set of full installation files, has serious flaws mainly due to insane installation and configuration scripts. My environment is as follows:
ORACLE_BASE=/opt/oracle
ORACLE_HOME=/opt/oracle/product/11.2.0/db_1
GRID_HOME=/opt/oracle/product/11.2.0/grid
all owned by oracle:dba. ASMLib was configured with four 256 GB partitions on four physical disks.
1. During grid installation the Prepare, Copy files, Link binaries, Setup files, Execute Root Scripts (root.sh), Update Inventory, Oracle Net Configuration Assistant all succeeded, but ASM Configuration Assistant FAILED and installation couldn't continue. That was because root.sh script (and inside it calling scripts) changed the ownership of ORACLE_BASE and GRID_HOME to root:dba, so that admin and diag directories creations in ORACLE_BASE were not permitted. After fixing that manually as root (immediately after executing root.sh), the installation continues and succeeds.
2. During installation of Client software the error message window appears stating that cannot find the /opt/oracle/product/11.2.0/db_1/oui/bin/runInstaller.var file. By pressing the Continue button the installation continues ignoring this.
3. If Oracle Scheduler Agent is selected for installation during Client software installation, the Oracle Enterprise Manager 11g Database Control Release 11.2.0.2.0 cannot start (https problem - cannot establish connection). To fix this, I had to deinstall Client software and install it again without Oracle Scheduler Agent.
4. The Performance window in Enterprise Manager 11g Database Control Release 11.2.0.2.0 cannot display any graph ("Initializing" and "Transferring data from localhost..." never end).
Are those issues known issues? If they are, why did Oracle ship that standalone patch without testing it before? Given that prior release (11.2.0.1) was free of any errors above, it is really beyond me to figure out this negligence.
NJAre those issues known issues? Have you created service request ? That would be much better to be sure about the workaround you found.
Nicolas.
Maybe you are looking for
-
Output can not be issued.
I want to see output of outbound delivery when I clicked print preview, i get message Output can not be issued. What is issue, if any body know plz do reply. Thnx in adv.
-
So a few weeks ago my MacBook Pro 2011 started having charging problems. I would use it normally. Then plug it in to charge anywhere between 5-20 percent like I've been doing for the past year that I've had it (since August 2011). Anyway, what hap
-
Hi, I just bought a Zen Vision and so far I think it is great. I was trolling the Creative site when I came across the Firmware updates. Can anyone tell me if it is worth it to update from .30.02 to .40? Though I am yet to use it I would not like to
-
Message Types for respective Modules
Hello All, Could you please let me know how we can determine the message type and idoc types for respective Modules based ont the description. Example FICO i.e. Invoice or etc. Thank you. Regards, Dinesh
-
In audit few statemntns SQL statements is not populating
Hi, I enable audit,for few (SELECT,CREATE TABLE)statements audit not populating sqltext in sys.aud$.But i can see few more SELECT&CREATE TABLE activityit populates SQLTEXT. if it not populates sql text ,what ll be the reason behind this?