Oracle Installation Issue on Linux

When I execute runInstaller Command it's give's following Error...
"runInstaller: line 88: /usr/Software/database/install/.oui: Permission denied"
What would I do to resolve this issue....
Please Help me...
Tharaka

Refer & you can easily install linux
http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/
http://kamranagayev.wordpress.com/2010/04/25/video-tutorial-installing-oel-and-oracle-10gr2/

Similar Messages

  • P6 R8.1 Web Service installation issue on Linux

    We are trying to install P6R8.1 web services on weblogic in linux. We have the following setup:
    1. Oracle 11g standard database in CentOS-5.4 64-bit
    2. P6R8.1/ Weblogic 10.3.3.4 installed on CentOS 5.4 64-bit (separate server).
    We have installed as per the oracle installation guide without any warning/ failure. After deploying the .war file (p6ws.war), it also showing Active in Weblogic admin console. But while trying to access the application (http://localhost:7001/p6ws) we are getting error: 403 Forbidden.
    We have tested the weblogic by deplyoing some sample .war file and it works fine
    After examining, we have found that there is no index.jsp file in the root of the p6ws.war file and it is only 29 mb compare to primaveraweb.ear file which is 194 mb of our existing installation (P6V7 with similar environment).
    Is our .war file is not properly generated or we are missing some steps? Or there is any other issue?
    Any help will be highly appreciated.
    Best Regards,
    Sandip

    In previous versions the following was sufficient:
    http://HOST:PORT/p6ws/
    The correct URL as of version 8.0 of P6 Web Services is the following:
    http://HOST:PORT/p6ws/services
    See the following: "Error 403--Forbidden" When Attempting To View Available Services For P6 Web Services (Doc ID 1293112.1)

  • Oracle installation problem on linux

    HI,
    I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
    AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
    "Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
    PLEAE HELP ME please help me !!!!!!
    Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
    Please help Me..

    Try setting the LD_ASSUME_KERNEL=2.2.5 environment variable before you run the installer.
    I needed to do this to get the 8.1.7 installer running on RedHat 7.1 and 7.2.
    Scott
    HI,
    I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
    AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
    "Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
    PLEAE HELP ME please help me !!!!!!
    Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
    Please help Me..

  • Oracle Installation Issue on windows 7 64 bit - database 11.2.0.3

    Hi ,
    I am trying to install 11.2.0.3 database on windows 7 prof 64 bit in lenova lap
    The issue is at the last screen the installer just hangs in the prerequists check.
    this is the installer log out put last portion
    INFO: Verification Result for Node:Laksiri
    INFO: Expected Value:50MB (51200.0KB)
    INFO: Actual Value:664.5859MB (680536.0KB)
    INFO:
    INFO: *********************************************
    INFO: Swap Size: This is a prerequisite condition to test whether sufficient total swap space is available on the system.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO:
    INFO: Verification Result for Node:Laksiri
    INFO: Expected Value:2.7944GB (2930184.0KB)
    INFO: Actual Value:3.7259GB (3906912.0KB)
    INFO:
    INFO: *********************************************
    INFO: Free Space: Laksiri:C:\Users\IBM_AD~1\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO:
    INFO: Verification Result for Node:Laksiri
    INFO: Expected Value:500MB
    INFO: Actual Value:93.9114GB
    INFO:
    INFO: *********************************************
    INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO:
    INFO: Verification Result for Node:Laksiri
    INFO: Expected Value:64-bit
    INFO: Actual Value:64-bit
    INFO:
    INFO: *********************************************
    INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO:
    INFO: Verification Result for Node:Laksiri
    INFO: Expected Value:5076
    INFO: Actual Value:561
    INFO:
    INFO: All forked task are completed at state performChecks
    INFO: Completed background operations
    INFO: Moved to state <performChecks>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <performChecks>
    INFO: Completed validating view at state <performChecks>
    INFO: Validating state <performChecks>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.db.action.PrereqAction
    INFO: Completed validating state <performChecks>
    INFO: Verifying route success
    INFO: Get view named [SummaryUI]
    and i found in the windows appliction log
    Log Name: Application
    Source: Application Hang
    Date: 4/17/2012 12:01:24 PM
    Event ID: 1002
    Task Category: (101)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: Laksiri
    Description:
    The program javaw.exe version 5.0.300.3 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: 6a8
    Start Time: 01cd1c618e421f8e
    Termination Time: 6
    Application Path: C:\Users\IBM_AD~1\AppData\Local\Temp\OraInstall2012-04-17_11-45-50AM\jdk\jre\bin\javaw.exe
    Report Id:
    Can some one tell what is the reason?

    Hi,
    As far as I can find on Google, I only see people solving a similar problem, by totally removing all Java installation and then install the latest Java 6 update.
    Have a look e.g. here: http://www.java-forums.org/awt-swing/34794-java-application-fails-launch-without-error.html
    It is not about installing oracle, but the person does have similar problems
    Success!!
    FJFranken
    Edit: Another link: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/java-tm-platform-se-binary-is-not-responding/38ea1c33-bd72-46aa-b87c-9172be7c57cc?msgId=1b3c5027-bc10-4425-b55c-038982d24953

  • Oracle Installation issue

    Dear All,
    I am successfully installed Oracle 10g on Windows 7,when i am trying to open sqlplus in command line,when i press Enter,it gone and it hidden ,i don't know why.
    Appreciate your help.
    Thanks

    Pl identify which version of "10g" and which version of Windows 7.
    These issues have been discussed many times in these forums - use the search feature to find threads like these
    Re: installation of 10g on windows 7 home premium 64 bit
    Re: which version of oracle works on windows 7
    HTH
    Srini

  • Installation issue with Linux 7.2

    I am getting the following error message while installing Oracle 8.1.7 on Linux 7.2
    Error in invoking target install of makefile
    /home/oracle/OraHome1/network/lib/ins_net_client.mk
    Any suggestion or help!!
    Thanks

    I'm having the same problem but with Linux 7.3 If you look at the make.log in
    $ORACLE_HOME/install it will give you more information. I found my problem is
    running $ORACLE_HOME/bin/genclntsh

  • 11i Installation Issue in Linux

    While running the rapidwiz i am facing the following problem
    [oracle@vision rapidwiz]$ ./rapidwiz
    Rapid Install Wizard is validating your file system......
    >> The Rapidwiz will use /home/oracle/oraInventory
    /home/oracle/oraInventory
    /home/oracle/oraInventory
    /home/oracle/oraInventory directory.
    >> Creating this directory now and setting write permissions...
    >> Please execute the script /tmp/oraInstRoot.sh as root to fix the above errors
    But I could find the oraInstRoot.sh in the / tmp folder is empty..
    How can I proceed in this scenario..?
    Many thanks in advance...

    Yes- all said above is correct.
    However, if you are a little bit concerned about permissions and all that stuff later on - not that I know anything right now that may be an issue- I would rather change the permissions on /tmp folder to allow anyone and everyone do stuff with it.
    i.e run the command 'chmod -R 777 /tmp' ( logging in as root though) to give all permissions to everyone.
    That way I wont loose my head trying to figure out if files created as a result of running rapidwiz as root will give the appsmgr or oracleapps users the right priviledges when I decide to continue as such.
    Just to mention, that I suspect the user installing the application was probably created but not given the right sets of persion to write to the /tmp folder, hence no oraInstRoot.sh file was created.
    ark_505 - was the /home/oracle/oraInventory folder created ? ( sounds silly a question...but you never know what you learn from these kind of questions) and were there log files created there ? Also confirm if the oraInstRoot.sh file was not created in the /home/oracle folder.
    All the best in the new year ahead

  • Oracle installation prob on linux

    i am new to RHEL and was installing oracle 10g , at the time of the database creation it gives an error ora-12547 TNS:lost contact. in the end it says invalid username/pwd. i have the checked the logs and everytime it uses the conection discriptor it throws the error. I tried using emca but its rejecting the sys pwd that i entered before installation. nothing is working. How to solve it and install oracle properly .......???

    yes checked the log, connection to : descriptor.*******version information****
    tracing not turned on.
    this error struct:
    ns main err code: 12547
    TNS-12547: TNS: lost contact
    ns secondary err code: 12560
    nt main erro code: 517
    TNS-00517: Lost contact
    nt secondary err code:32

  • Oracle installation issues on ubuntu

    I have installed Ubuntu 10.04 and 32bit and Installing Oracle 11g 2. I am following below link to install oracle 11g.
    http://blogs.oracle.com/toxophily/entry/installing_oracle_11g_db_on
    When I run "useradd -s /bin/bash -m -g oinstall -G dba oracle passwd oracle" it does not execute successfully.
    root@OraUbuntu:/home# whoami
    root
    root@OraUbuntu:/home# useradd -s /bin/bash -m -g oinstall -G dba oracle passwd oracle
    Usage: useradd [options] LOGIN
    Options:
    -b, --base-dir BASE_DIR       base directory for the home directory of the
    new account
    -c, --comment COMMENT         GECOS field of the new account
    Regards,

    root@OraUbuntu:/home/raj/Desktop/Oracle/linux_11gR2_database_1of2/database# ./runInstaller
    ./runInstaller: 154: /home/raj/Desktop/Oracle/linux_11gR2_database_1of2/database/install/.oui: Permission denied
    root@OraUbuntu:/home/raj/Desktop/Oracle/linux_11gR2_database_1of2/database# whoami
    root
    root@OraUbuntu:/home/raj/Desktop/Oracle/linux_11gR2_database_1of2/database# su oracle
    oracle@OraUbuntu:/home/raj/Desktop/Oracle/linux_11gR2_database_1of2/database$ whoami
    oracle
    oracle@OraUbuntu:/home/raj/Desktop/Oracle/linux_11gR2_database_1of2/database$ ./runInstaller
    ./runInstaller: 154: /home/raj/Desktop/Oracle/linux_11gR2_database_1of2/database/install/.oui: Permission denied
    oracle@OraUbuntu:/home/raj/Desktop/Oracle/linux_11gR2_database_1of2/database$

  • Forms 10g Installation issue on windows 7 Professional service pack 1

    hi
    I am trying to install oracle forms 10g  64 bit windows 7 Professional service pack 1 ..
    Below are 2 files that i am using ..
    ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
    ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
    But it failed but the error is .. 
    Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2.    Actual 6.1     Failed <<<<
    just wondering if there are any workaround ..

    Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7.  You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified.  You must have a My Oracle Support account to obtain the patch.
    Now, to your question - is there a workaround; the answer is yes.  There are known issues with this installer.  I'll list them and their workaround.
    1.  The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
    Workaround:  Right-click the Installer and select Properties.  Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for:  Windows XP SP3).
    2.  The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
    Workaround:  You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes.  See this Microsoft article for more information on changing VM settings.  http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
    This change will require you to restart your computer.  After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
    3.  The Oracle installer MUST be installed as an "Administrator". 
    Workaround:  Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab.  Click the "Run this program as an administrator" checkbox.
    4.  Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
    Run the Oracle installer and it should now install succesfully.
    Craig...

  • Installation problem on Linux Slackware 7.1 (Oracle 8i)

    I try install Oracle 8i Enterprise in Linux Slackware 7.1 (kernel 2.2.16), but the runInstaller don't work.
    I read the installation manuals and make all steps, but the runInstaller don't work.
    I get this message:
    ./runInstaller
    The Java RunTime Environment was not found at bin/jre. Hence, the Oracle Universal Installer cannot be run.
    Please visit http://www.javasoft.com and install JRE version 1.1.8 or higher and try again.
    : No such file or directory
    I try --> ln -s /usr/local/jre118_v3 /usr/local/java
    and --> ln -s /usr/local/jre118_v3 /usr/local/jre
    and put in PATH --> /usr/local/jre/bin
    Nothing work's.
    Somebody can help me ?????
    Thank's ....

    Hello!
    I also tried to install Oracle 8.1.6.1 (after giving up the 8.0.5 installation due to segmentation faults all over..), it also failed.
    After trying to install Oracle 8.1.6.1 on RedHat 7.0 and it still crashed, i sent a mail to some guru that wrote the oracle-how-to document for redhat, here is what he replied.
    My guess is that this also applies to the newest slackware version, because i presume that slackware 7.0 also use the newest glibc libraries;
    Thanks for the feedback.
    Oracle 8.1.6 does not work under Red Hat >Linux 7. Yes, that's the problem
    that I mentioned in the doc--you get to 80% >and the DBCA crashes and the
    Oracle executables die.
    I've heard, but I haven't tried it myself, >that if you install the latest
    glibc errata (2.1.94) then the DBCA >completes but the Oracle executables
    still die. The DBCA problem was apparently >a Java issue that is fixed in
    the errata. But you're still out of luck >since the exes won't work.
    It might appear that this is a problem with >Red Hat Linux 7. But it appears
    that it is a problem with some assumptions >that Oracle made, assumptions
    that worked with glibc 2.1.3 (the C library >included with RHL 6.2) but which
    prove false with later glibc versions. As >other Linux distributions adopt
    the new glibc Oracle will fail to work on >them as well.
    The best advice I can give at this point is >to install and run Oracle on
    Red Hat Linux 6.2. Hopefully Oracle will >address the glibc issues with the
    8.1.7 release.
    ChrisI then installed Orace on RedHat 6.1 and it worked like a dream.
    Maybe you guys should try your luck on an earier version of slackware?
    Hope that helped...
    null

  • Error during Oracle installation in Oracle Enterprise Linux

    Hi All,
    I was trying to install Oracle 10g in Oracle Enterprise Linux, and I'm getting the following error when I give the command *./runInstall*.
    [oracle@localhost database]$ ./runInstaller -responseFile /home/oracle/database/response/enterprise1.rsp -nowelcome
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_12-58-11AM. Please wait ...[oracle@localhost database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
    Copyright (C) 1999, 2005, Oracle. All rights reserved.
    Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
    127.0.0.1:0.0
    127.0.0.1:0.0
    OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
    OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
    - For csh: % setenv DISPLAY 192.168.1.128:0.0
    - For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
    Use the following command to see what shell is being used:
    echo $SHELL
    Use the following command to view the current DISPLAY environment variable setting:
    echo $DISPLAY
    - Make sure that client users are authorized to connect to the X Server.
    OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
    % xhost +
    To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
    % <full path to xclock... see below>
    If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
    Typical path for 'xclock': '/usr/X11R6/bin/xclock'
    I have tried to set the DISPLAY variable to my IP address, but it still gives the same issue.
    Please find the logs for the same:
    [oracle@localhost database]$ /sbin/ifconfig
    eth0 Link encap:Ethernet HWaddr 00:0C:29:95:3B:4F
    inet addr:192.168.64.128 Bcast:192.168.64.255 Mask:255.255.255.0
    inet6 addr: fe80::20c:29ff:fe95:3b4f/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:532694 errors:0 dropped:0 overruns:0 frame:0
    TX packets:288167 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:792077163 (755.3 MiB) TX bytes:16147337 (15.3 MiB)
    Interrupt:193 Base address:0x2024
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:3280 errors:0 dropped:0 overruns:0 frame:0
    TX packets:3280 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1739143 (1.6 MiB) TX bytes:1739143 (1.6 MiB)
    [oracle@localhost database]$ export DISPLAY=192.168.64.128:0.0
    [oracle@localhost database]$ echo $DISPLAY
    192.168.64.128:0.0
    Please suggest on what can be done as this is the last step for the Oracle installation which I'm unable to complete.
    Let me know for any more details needed.
    Thanks
    Ravi
    Ph: +919583750774

    Hi,
    Thanks for the immediate response.
    Now I'm getting the following error:
    [oracle@scondw01 database]$ ./runInstaller -force -responseFile /u01/database/response/enterprise1.rsp -silent -nowelcome
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_09-10-03PM. Please wait ...[oracle@scondw01 database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
    Copyright (C) 1999, 2005, Oracle. All rights reserved.
    Unexpected Signal : 11 occurred at PC=0xB7C297CE
    Function=(null)
    Library=/tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
    NOTE: We are unable to locate the function name symbol for the error
    just occurred. Please refer to release documentation for possible
    reason and solutions.
    Current Java thread:
    at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.chgrp(Native Method)
    at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.changeGroup(OiipgBootstrap.java:1206)
    at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.writeInvLoc(OiipgBootstrap.java:900)
    at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(OiipgBootstrap.java:408)
    at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(OiicSessionInterfaceManager.java:400)
    at oracle.sysman.oii.oiic.OiicSilentInterfaceManager.doInvSetupOperations(OiicSilentInterfaceManager.java:679)
    at oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(OiicInvSetupWCCE.java:217)
    at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
    at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
    at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
    at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:546)
    at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:929)
    at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
    Dynamic libraries:
    08048000-08056000 r-xp 00000000 08:01 511751 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/bin/java
    08056000-08059000 rwxp 0000d000 08:01 511751 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/bin/java
    a4d43000-a4d4a000 r-xp 00000000 08:01 659354 /tmp/OraInstall2012-04-05_09-10-03PM/oui/lib/linux/liboraInstaller.so
    a4d4a000-a4d4b000 rwxp 00006000 08:01 659354 /tmp/OraInstall2012-04-05_09-10-03PM/oui/lib/linux/liboraInstaller.so
    a4d4b000-a4d88000 r-xs 00000000 08:01 659257 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/jewt4-nls.jar
    a4d88000-a4f2f000 r-xs 00000000 08:01 659256 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/jewt4.jar
    a4f2f000-a4f67000 r-xs 00000000 08:01 659275 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraPrereq.jar
    a4f67000-a5085000 r-xs 00000000 08:01 659274 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/classes12.jar
    a5085000-a508d000 r-xs 00000000 08:01 659272 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/swingaccess.jar
    a508d000-a50da000 r-xs 00000000 08:01 659255 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3-nls.jar
    a50da000-a50e0000 r-xs 00000000 08:01 659273 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3-swingaccess.jar
    a50e0000-a5365000 r-xs 00000000 08:01 659254 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3.jar
    a5365000-a538c000 r-xs 00000000 08:01 659259 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/help4-nls.jar
    a538c000-a53f1000 r-xs 00000000 08:01 659258 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/help4.jar
    a53f1000-a54a6000 r-xs 00000000 08:01 659271 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/oracle_ice.jar
    a54a6000-a54c3000 r-xs 00000000 08:01 659269 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_zh_TW.jar
    a54c3000-a54e0000 r-xs 00000000 08:01 659268 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_zh_CN.jar
    a54e0000-a54fe000 r-xs 00000000 08:01 659267 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_pt_BR.jar
    a54fe000-a551b000 r-xs 00000000 08:01 659266 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_ko.jar
    a551b000-a5537000 r-xs 00000000 08:01 659265 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_ja.jar
    a5537000-a5554000 r-xs 00000000 08:01 659264 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_it.jar
    a5554000-a5571000 r-xs 00000000 08:01 659263 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_fr.jar
    a5571000-a558e000 r-xs 00000000 08:01 659262 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_es.jar
    a558e000-a55ad000 r-xs 00000000 08:01 659261 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_de.jar
    a55ad000-a55c9000 r-xs 00000000 08:01 659260 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp.jar
    a55c9000-a55ea000 r-xs 00000000 08:01 659270 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstImages.jar
    a55ea000-a55f0000 r-xs 00000000 08:01 659345 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ojmisc.jar
    a55f0000-a56ce000 r-xs 00000000 08:01 659342 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/emCfg.jar
    a56ce000-a56e1000 r-xs 00000000 08:01 659344 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/orai18n-mapping.jar
    a56e1000-a57e1000 r-xs 00000000 08:01 659343 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/orai18n-collation.jar
    a57e1000-a5866000 r-xs 00000000 08:01 659341 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/xml.jar
    a5866000-a5868000 r-xs 00000000 08:01 659349 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraInstallerNet.jar
    a5868000-a5876000 r-xs 00000000 08:01 659350 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/share.jar
    a5876000-a593d000 r-xs 00000000 08:01 659347 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/srvm.jar
    a593d000-a5a65000 r-xs 00000000 08:01 659346 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/xmlparserv2.jar
    a5a65000-a5a72000 r-xs 00000000 08:01 659351 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/oneclick.jar
    a5a72000-a5e0f000 r-xs 00000000 08:01 659348 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraInstaller.jar
    a5e0f000-a5e2b000 r-xs 00000000 08:01 642421 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/sunjce_provider.jar
    a5e2b000-a5ee6000 r-xs 00000000 08:01 642420 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/localedata.jar
    a5ee6000-a5ef3000 r-xs 00000000 08:01 642419 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/ldapsec.jar
    a5ef3000-a5ef6000 r-xs 00000000 08:01 642418 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/dnsns.jar
    a60fa000-a62fa000 r-xp 00000000 08:01 330503 /usr/lib/locale/locale-archive
    b5bfb000-b618a000 r-xs 00000000 08:01 511764 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/charsets.jar
    b618a000-b619b000 r-xs 00000000 08:01 511802 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/jce.jar
    b619b000-b6274000 r-xs 00000000 08:01 511803 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/jsse.jar
    b6274000-b628a000 r-xs 00000000 08:01 196225 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/sunrsasign.jar
    b62d4000-b79c2000 r-xs 00000000 08:01 511810 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/rt.jar
    b79c2000-b79d6000 r-xp 00000000 08:01 659151 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libzip.so
    b79d6000-b79d9000 rwxp 00013000 08:01 659151 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libzip.so
    b79d9000-b79f9000 r-xp 00000000 08:01 659136 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libjava.so
    b79f9000-b79fb000 rwxp 0001f000 08:01 659136 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libjava.so
    b79fb000-b7a0b000 r-xp 00000000 08:01 659150 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libverify.so
    b7a0b000-b7a0d000 rwxp 0000f000 08:01 659150 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libverify.so
    b7a0d000-b7a16000 r-xp 00000000 08:01 344676 /lib/libnss_files-2.3.4.so
    b7a16000-b7a17000 r-xp 00008000 08:01 344676 /lib/libnss_files-2.3.4.so
    b7a17000-b7a18000 rwxp 00009000 08:01 344676 /lib/libnss_files-2.3.4.so
    b7a1f000-b7a23000 rwxs 00000000 08:01 249425 /tmp/hsperfdata_oracle/5761
    b7a23000-b7a44000 r-xp 00000000 08:01 344698 /lib/tls/libm-2.3.4.so
    b7a44000-b7a45000 r-xp 00020000 08:01 344698 /lib/tls/libm-2.3.4.so
    b7a45000-b7a46000 rwxp 00021000 08:01 344698 /lib/tls/libm-2.3.4.so
    b7a46000-b7a58000 r-xp 00000000 08:01 344660 /lib/libnsl-2.3.4.so
    b7a58000-b7a59000 r-xp 00011000 08:01 344660 /lib/libnsl-2.3.4.so
    b7a59000-b7a5a000 rwxp 00012000 08:01 344660 /lib/libnsl-2.3.4.so
    b7a5e000-b7a66000 r-xp 00000000 08:01 659161 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
    b7a66000-b7a67000 rwxp 00007000 08:01 659161 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
    b7a67000-b7e6d000 r-xp 00000000 08:01 659159 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
    b7e6d000-b7e88000 rwxp 00405000 08:01 659159 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
    b7e9c000-b7fc1000 r-xp 00000000 08:01 344696 /lib/tls/libc-2.3.4.so
    b7fc1000-b7fc3000 r-xp 00124000 08:01 344696 /lib/tls/libc-2.3.4.so
    b7fc3000-b7fc5000 rwxp 00126000 08:01 344696 /lib/tls/libc-2.3.4.so
    b7fc7000-b7fc9000 r-xp 00000000 08:01 344656 /lib/libdl-2.3.4.so
    b7fc9000-b7fca000 r-xp 00001000 08:01 344656 /lib/libdl-2.3.4.so
    b7fca000-b7fcb000 rwxp 00002000 08:01 344656 /lib/libdl-2.3.4.so
    b7fcc000-b7fda000 r-xp 00000000 08:01 344700 /lib/tls/libpthread-2.3.4.so
    b7fda000-b7fdb000 r-xp 0000d000 08:01 344700 /lib/tls/libpthread-2.3.4.so
    b7fdb000-b7fdc000 rwxp 0000e000 08:01 344700 /lib/tls/libpthread-2.3.4.so
    b7fe9000-b7ffe000 r-xp 00000000 08:01 344641 /lib/ld-2.3.4.so
    b7ffe000-b7fff000 r-xp 00015000 08:01 344641 /lib/ld-2.3.4.so
    b7fff000-b8000000 rwxp 00016000 08:01 344641 /lib/ld-2.3.4.so
    Heap at VM Abort:
    Heap
    def new generation total 576K, used 387K [0xa6550000, 0xa65f0000, 0xa70d0000)
    eden space 512K, 69% used [0xa6550000, 0xa65a8f48, 0xa65d0000)
    from space 64K, 50% used [0xa65d0000, 0xa65d8080, 0xa65e0000)
    to space 64K, 0% used [0xa65e0000, 0xa65e0000, 0xa65f0000)
    tenured generation total 1408K, used 1090K [0xa70d0000, 0xa7230000, 0xafb50000)
    the space 1408K, 77% used [0xa70d0000, 0xa71e0938, 0xa71e0a00, 0xa7230000)
    compacting perm gen total 4864K, used 4693K [0xafb50000, 0xb0010000, 0xb3b50000)
    the space 4864K, 96% used [0xafb50000, 0xaffe5698, 0xaffe5800, 0xb0010000)
    Local Time = Thu Apr 5 21:10:05 2012
    Elapsed Time = 0
    # HotSpot Virtual Machine Error : 11
    # Error ID : 4F530E43505002EF
    # Please report this error at
    # http://java.sun.com/cgi-bin/bugreport.cgi
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
    # An error report file has been saved as hs_err_pid5761.log.
    # Please refer to the file for further information.
    Please let me know what can be the solution.
    thanks
    Ravikanth

  • Oracle Application Server 10.1.3.1 installation issue

    Hi,
    I am trying to install Oracle Applicaiton server on linux and i have installed it on similar boxes before without any issues, however this time around after i am done with the installation, it is not showing me the enterprise console. It gives a successful installation message but with the following message.
    Application Server Control Console is not running in this instance of Oracle Application Server. You can manage this instance remotely through another instance of Oracle Application Server that is configured to run Application Server Control Console.
    What should I do to get the admin console. I also looking around and saw but emctl utitlity is not there in ORACLE_HOME/bin
    Edited by: user9938780 on Dec 11, 2008 11:34 AM

    the 10.1.3.1 version does not use emctl
    if you do a opmnctl status -app you can see your applications, one of them is ascontrol
    you can reach the emconsole through http://hostname:7777/em
    to start you can issue opmnctl startproc application=ascontrol
    reg
    Michel
    Edited by: MichelS on Dec 11, 2008 11:53 AM
    Edited by: MichelS on Dec 11, 2008 11:54 AM

  • Oracle 9iAS Installation Issues, Win 2000

    Hi Folks,
    I'm trying to Install 9IAS on a WIN2000 PE.
    I already have Oracle NT Personal Edition (download nt817personal), up and running.
    My Question is do I need to use Oracle nt817ee (Enterprise Edition)
    Any suggestions ?
    Thanks

    I agree with your 5 P's, but Oracle is killing themselves by not improving the installation issues. Oracle is in a fight to the death with Microsoft, and there are a lot of people who give up on Oracle products because the learning curve is too steep just to be able to login as Scott. I have a lot of experience with Windows and Oracle, and have installed the RDBMS on probably 50 separate machines in the last several years, yet I still cringe when I double click setup.exe since I never know if universal installer is going to abort. I'm not a Unix or Linux guru, and I tried and tried to get Oracle RDBMS 8i to install on several flavors of Red Hat, but I gave up. DB2 and Interbase both installed without the hassles. Take a look at the Linux forum on Technet, and look at the effort that some people are doing to try to get it to work. It should not be this hard. I would like to use Linux/Oracle on some of our servers, but frankly it is too hard currently. You shouldn't need a metal link account to install software on a clean install of Windows, or be a guru at writing device drivers for Linux to install Oracle on that platform.

  • Installation of oracle 10g on RedHat Linux EE 3

    Hi,
    I am going to Install of oracle 10g on RedHat Linux EE 3, rigth now i am running oracle 9i on windows platform. I need following things:
    -I want to export all my data from oracle 9i on windows. For this what is the best way should i transport my tablespace and install oracle 10g on linux and import them after creating db or should i simply export and import it from there.
    -Is there any issues that i should look at before i transfer my database.
    -We are a Industrial Laboratory and use scientific notation in our database. Would this import export can takecare of all the things or should i set some character set setting before import/export.
    -Any thing else if you thing that i should take care.
    Thanks & Regard
    Rashid K.K

    You cannot use transportable tablespace. Platform independent transportable tablespace run only on newer versions (10g). You have to create the tablespaces on you linux machine and than exp/imp (full=y).
    Bye, Aron

Maybe you are looking for

  • Crystal report error on Target Machine

    We have to provide application exe to our clients. The application is developed in Visual Studio.Net 2010 and by using SAP crystal report CRforVS_13_0. Client must be able to fire reports on their target machine on which the Dot Net framework and u20

  • Problem when using package

    hi... i have a question abt. package . i have created a package called mypack with a file class1.java. I have one more file with the same file name class1.java outside of the mypack also. If i call the class1 which is inside the mypack by using mypac

  • Rollover state not working on active state

    Hi, I have a problem with menu states. When a menu item is in its active state the rollover state isn't working. Is this supposed to happen or is there a solution to this? Thanks.

  • Can I install Windows 7 with this version "Windows 7 Home Premium SP1 64bit (Full) System Builder DVD 1 Pack"

    Its so hard to tell if I am ordering the right version, Will this version run smoothly and well, and does it have full support for drivers and etc. Thanks For The Help

  • Help! I screwed something up in my system

    Here is how I caused the problem. I used a JavaScript to make a widget. Part of this called another file that put a black box around input items, and I was testing the widget. Well, now my entire system is doing this--putting a black box around every