Oracle Linux 6.4 Bootable disk?
Hello, I am about to download Oracle Linux 6.4 and install it on a 32 bit computer.
How can I make a bootable disk so when I reboot this computer it goes straight into the install process?
Do I download Oracle Linux Release 6 Update 4 for x86 (32 Bit) and then download Oracle Linux Release 6 Update 4 Boot iso image for x86 (32 bit)?
Do i burn the content of the Oracle Linux Release 6 Update 4 Boot iso image for x86 (32 bit) on the same disk as the Oracle Linux Release 6 Update 4 for x86 (32 Bit)?
Can someone please tell me how to do this?
Installing a 32-bit OS on reasonable and recent hardware does not make sense. It will only limit your addressable memory and disk space for no good reason.
Anyway, you need to download the binary software distribution image, which is about 2 - 4 GB. You do not need the boot or source media.
Before burning the DVD, make sure to verify the checksum of the downloaded ISO image. It is not unlikely that the download is corrupted and won't work properly.
You can find the checksum value when clicking the View Digest button on the E-Delivery software download web page.
Under Microsoft Windows, see the following knowledgebase article:
http://support.microsoft.com/kb/841290
Under Linux and Mac OS X, enter the following at the system command prompt (Terminal):
openssl sha1 name.iso
The checksum must match!
To burn the iso image to DVD:
http://windows.microsoft.com/en-US/windows7/Burn-a-CD-or-DVD-from-an-ISO-file
For information using Apple Mac OS X and older versions of MS Windows:
http://www.wikihow.com/Burn-ISO-Files-to-DVD
And last not least, remember to set the media startup priorities of you computer BIOS accordingly: Floppy, DVD, Harddrive, Network.
Similar Messages
-
Why Oracle Linux 5 cannot recover disk space after delete files ?
Folks,
Hello. When I create a Virtual Machine for Oracle Linux 5 to install EBS R12, I allocate 300GB to the VM. I download EBS R12 Source Files (45.7GB) and unzip the files (46GB). Total size of stage area directory(EBS_R12) is 91.7GB.
Because some files are corrupted and cannot install, I move the folder EBS_R12 into trash but cannot empty trash. I move EBS_R12 from trash back to the directory. Then at root user, use command "rm -rf " to delete EBS_R12 completely.
I shut down Oracle Linux 5 and restart it, 91.7GB disk space cannot recover.
I download some other files into Oracle Linux files and then delete those files, but disk space cannot be recovered either.
It seems that OEL5 virtual disk only can expand but cannot be reduced. The VM disk space is less than 200GB now and not enough to install EBS R12.
Can any folks tell me how to make 91.7GB disk space and some more disk space come up ?Folks,
Hello. Thanks a lot for replying.
Host OS is Windows 7, Guest OS is Oracle Linux 5 on the top of VMPlayer 3. The VM of Oracle Linux 5 is created on the external USB drive and not on the local hard disk.
There is a directory /tmp/VMwareDnd/376c7cae/EBS_R12 in Oracle Linux 5 file system. I copy/Paste the folder of EBS_R12 from Windows 7 into Oracle Linux 5. All of zip files and unzipped files are placed in the folder of EBS_R12.
After EBS_R12 is deleted, the external USB drive(F:) doesn't come up 91.7GB disk space.
My question is:
Where to run "boot>linux rescue" command ?
Does this command work correctly in the external USB drive ? -
Installing Oracle Linux on external hard-disk or DVD
Hi All,
Is it possible to install Oracle Enterprise Linux on external hard-disk or DVD?
I already have Windows 7 and want to install Oracle Enterprise Linux either in dual-boot mode or on external hard-disk/DVD. I want to install Oracle E-Business Suite on Linux.
Can you also let me know the minimum RAM capacity required for running Oracle E-Business Suite R12 on Oracle Enterprise Linux?
Pointers and workarounds are highly appreciated.
Regards,
KashifIt's technically possible, but why bother? Since you are asking this question you will very likely run into more trouble with such a setup. In addition, Oracle Enterprise Linux is designed for server hardware and will give you additional trouble if you install it on a desktop or laptop computer.
I would recommend to you to install Oracle Virtualbox and install OEL as a guest OS and run Linux side by side with your Windows system. There is plenty of information for this task on the web. For the latest version and info on Virtualbox see http://www.virtualbox.org/
System and hardware requirements for Oracle e-suite will be a different questions, for which you might find answers here:
http://download.oracle.com/docs/html/B15721_03/inst_req.htm
Edited by: Dude on Apr 3, 2011 5:55 AM -
Step 6 error insufficient disk space in oracle linux
hi am in step 6 installing my oracle oracle in oracle Linux am getting insufficient disk space on this volume for the selected oracle
i have this dir oracle_base = /u01/app/oracle/product
sofware location /u01/app/oracle/product/11.2.0/db_1
database file location /u01/app/oracle/product/oradata
how can i check space becuase is have enough space
Edited by: Tshifhiwa on 2012/01/27 2:40 PM
i type free -m
total used free shared buffers cached
Mem: 1988 1844 143 0 36 1365
-/+ buffers/cache: 443 1545
Swap: 3999 0 3999
Edited by: Tshifhiwa on 2012/01/27 2:40 PM
Edited by: Tshifhiwa on 2012/01/27 3:44 PM
Edited by: Tshifhiwa on 2012/01/27 4:05 PMTshifhiwa wrote:
hi am in step 6 installing my oracle oracle in oracle Linux am getting insufficient disk space on this volume for the selected oracle
i have this dir oracle_base = /u01/app/oracle/product
sofware location /u01/app/oracle/product/11.2.0/db_1
database file location /u01/app/oracle/product/oradata
how can i check space becuase is have enough space
Edited by: Tshifhiwa on 2012/01/27 2:40 PM
i type free -m
total used free shared buffers cached
Mem: 1988 1844 143 0 36 1365
-/+ buffers/cache: 443 1545
Swap: 3999 0 3999
Edited by: Tshifhiwa on 2012/01/27 2:40 PM
Edited by: Tshifhiwa on 2012/01/27 3:44 PM
Edited by: Tshifhiwa on 2012/01/27 4:05 PM<Sigh!>
http://lmgtfy.com/?q=check+disk+space+in+linux -
Poor SSD disk IO speed in Oracle Linux 6.3 (Windows migration)
Hello,
I am trying to migrate from Windows to Oracle Linux, but I'm seeing very poor disk IO speeds. It's probably a tuning thing, but I'm relatively new to Oracle Linux and could use some detailed advice.
I took one physical server and migrated it from Windows 2008R2 to Oracle Linux 6.3 while maintaing the same Oracle version (11.2.0.3 Enterprise with ASM) and the same hardware (quad CPU 48 core HP DL585 G7 with 128GB RAM, 7 LSI 9200-8e HBAs, 28 Samsung SSD Drives). Disk IO performance, as measured using Oracle IO Calibration, was ~7,800MB/Second and 440K IOPS under windows but fell to ~2,400MB/Second and 250K IOPS under Linux.
Oracle Linux and the DB were installed using default values. The Oracle tools seem to have done a great job setting all of the obvious IO tuning parameters like the scheduler, but I figure that there are other important IO-related OS or DB parameters and that I have failed to configure the system properly.
My goal for the migration is sequential read IO speed and I would have bet money that Linux would provide better performance than Windows. I still think that it should. What basic IO tuning should I do for Oracle Linux using ASM and SSD drives?
Thank you!
Some details:
Oracle DB 11.2.0.3 enterprise installed via the GUI with the "Data Warehousing" template
ASM - single disk group, 28 SSD disks, AU=4MB
Oracle memory: Automatic memory management, 64GB allocated
Non-default Oracle params: filesystemio_options=setall, disk_asynch_io=true
Edited by: 975524 on Dec 7, 2012 8:56 AMThanks "dude" for the advice. Unfortunately, I am still seeing low IO speeds.
The default scheduler for OEL 6.3 with the DB pre-install package is deadline, which seemed like a far better choice than CFS. Based on your advice, I tried noop this morning and got the same results. I also tested with and without hugepages and saw only a small difference - at least in IO speed - I did not test overall DB performance. Lastly, I understand the /dev/shm issue, but even with the default configuration I'm getting 64MB allocated to Oracle, which is far more than is needed to test sequential IO - in fact I can get better results by using less RAM.
To answer your questions, I am testing using Oracle IO Calibration, which is an IO testing feature of the Oracle DB that is similar to the standalone Oracle Orion tool. I also performed a few tests using IOMeter, but found that the Linux version of that product was not giving me consistent data. The overall trend was the same however - IO on the Linux version far lower than the same hardware running Windows. The system is functioning very well, so I assume that everything has been installed correctly, but I do not think that it was installed optimally - thus my cry for help.
I am so surprised that Linux is showing slow IO!
Edited by: 975524 on Dec 7, 2012 9:22 AM -
How to see new disk in oracle linux 5
Dear,
i am using oracle VM and created 2 guest OS (both Olx5) i also created a shared disk and assigned to both linux servers.
question: how can i see the disk in each server. using fdisk -l it just shown the one there before.
in HPUX we have ioscan to detect new devices. is there away to check for new disk in oracle linux.
Thanks in advance.
Tomfdisk -l shows only existing partitions. So if your new disk has not partition created it will be not shown in the output.
AFAIK there is not such command which will list all devices but there are several ways how to find the devices. All informations you can find in /proc directory (fdisk -l reads /proc/partitions when device is not passed as argument).
You can find devices (local disks) for example using following commands (hope it helps):
cat /var/log/dmesg |egrep 'sd[a-z]: s|hd[a-z]: h'
cat /proc/diskstats |egrep -v 'ram|fd'|awk {'print $3'} -
How to compile Oracle Linux source?
I accidentally downloaded source DVD "Oracle Linux Release 5 Update 2 source - DVD" instead of installable ISO image. Is there anyway I can compile it to make bootable ISO image?
I tried to search this forum as well as other places but couldn't find any information hence thought of opening a thread before I proceed to download correct file which will again take 10+ hrs with my Internet speed :(
Any help is highly appreciated. Also I need to know which packages are required to be installed for compiling the source if at all that is possible. I am using Ubuntu 11.10 Desktop.
Thanks in advance for any help and hope to get a reply soon :) I need to urgently install Oracle 11gR2 on it.
Edited by: user6582219 on Apr 12, 2012 1:10 AM
While browsing the forum for any possible solution I came to a thread that discuss installation of a package oracle-rdbms-server-11gR2-preinstall. When searched through search engine I came to know about recent certification Oracle 11gR2 on Oracle Linux 6, here is the link https://blogs.oracle.com/linux/entry/announcing_oracle_database_11g_r2
https://blogs.oracle.com/linux/entry/announcing_oracle_database_11g_r2
Thing is I already have Oracle Linux 6 Update 2 (the latest) installed on my machine in dual boot mode so I dropped the idea of installing version 5.2. As per the documentation 11gR2 was not certified earlier on Linux 6.2 so I thought of installing 5.2 but it is not necessary now.
I would still appreciate if someone could answer my question just for knowing the procedure compiling source. May be it can help someone else trying to achieve this.
I have another couple of important questions and need guidance from the experts over here. I am not sure if it is appropriate to open a new thread but for now I am posting them here.
Before proceeding here are my environment details:
Machine: x86 32 bit with 2 GB RAM/250 GB HD.
OS: Kubuntu 11.10 Desktop and Oracle Linux 6 Update 2 in dual boot mode.
Here are my partition details for your reference but as I am planning to do the installation from the scratch following new ideal scheme you can jump to last paragraph following the line "*********************************" for my questions.
Unfortunately my partition plan went wrong and here is what I have now:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x3d5ba9e1
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1002047 500000 83 Linux
/dev/sda2 151525080 361253654 104864287+ 7 HPFS/NTFS/exFAT
/dev/sda4 1003518 151001087 74998785 5 Extended
/dev/sda5 1003520 7002111 2999296 82 Linux swap / Solaris
/dev/sda6 7004160 11001855 1998848 83 Linux
/dev/sda7 11003904 51001343 19998720 83 Linux
/dev/sda8 51003392 110041087 29518848 83 Linux
Partition table entries are not in disk order
/dev/sda1 here is /tmp, /dev/sda2 is my data partition, I have separate /home / (root) partition for Kubuntu and remianing around 20 GB in extended partition is used for Oracle Linux 6.2 with default Oracle suggested LVM partition. I also have separate /boot for Kubuntu and I chose not to install grub while installing Oracle Linux. I later modified grub.cfg to add entries for Oracle Linux and now I can boot both OSs successfully.
My issue now is I cannot extend 20 GB space (in extended partition) that I have given to Oracle though I have around 40 GB space available. This is because I alreay have 4 primary partitions (one for /boot others for "data" and one extended partition). So I have to make primary partition out of free space and install Oracle in a single partition without following recommended partition layout scheme.
Now I want to do the installation of both the OS from the scratch and really need an advice on partition layout scheme. Here is summary of what I wan to achieve:
1. Keep the "data" partition (primary) intact and carve an ideal partition layout for both the OS with separate /boot, /tmp, /home, swap (and may be for /usr???). Also may be I can share swap?
2. How do I go about using LVM and is it recommended for this case? What would be ideal locations for each partitions and sizes? I already used 100 GB for "data" so now I want to keep 60 GB for Oracle Linux (and Oracle DB for which I will again make few sub-partitions) and remaining will be for Kubuntu.
Well, I am not sure if this is the right place to ask these questions but since I can see very knowlegeable top contributors here that are willing to help novice users I thought of posting these questions.
I would really really appreciate if someone can provide me rough draft of partition scheme in my case considering the sub-partitions needed for Oracle DB. I went thorugh number of forums and documentations to come up with solutuion and finally thought of getting help after much confusion.
I really need to carefully plan this time because it's third time I am doing reinstallation from the scratch because of poor plan I followed previously.
Thank you very much in advance and please let me know in case more information is needed from my side.
Regards,
RameshI accidentally downloaded source DVD "Oracle Linux Release 5 Update 2 source - DVD" instead of installable ISO image. Is there anyway I can compile it to make bootable ISO image?Google will be your best friend for such a question, for instance, "Creating a Custom centos Linux bootable ISO Image". There is no need to duplicate the effort. I recommend you download the correct installation DVD, e.g. 5.8
Thing is I already have Oracle Linux 6 Update 2 (the latest) installed on my machine in dual boot mode so I dropped the idea of installing version 5.2. As per the documentation 11gR2 was not certified earlier on Linux 6.2 so I thought of installing 5.2 but it is not necessary now.So you don't need to install 5.2 anymore, but you want the information how to compile a installation DVD from the 5.2 source anyway?!
I have another couple of important questions and need guidance from the experts over here. I am not sure if it is appropriate to open a new thread but for now I am posting them here.Questions may be important for you, but not necessarily for others. No one will complain if you create a new thread for particular questions or subjects. It is better to separate your topics and questions rather than creating a multi-mega thread, which does little to help anyone else but you. It means more work on your end, but it will be easier for anyone to participate or answer your questions, and it will allow you to better award answers.
Regarding your partitioning questions: It is generally difficult to address such topics in a forum. You are asking for a book of information. My advice is to drop the old fashioned concepts of dual or triple boot options and install Oracle VirtualBox instead. It will make all of these questions obsolete and you can use whatever defaults when installing your virtual machine guest OS. Its a far more superior way of dealing with multiple operating systems on one and the same computer.
I am using Ubuntu 11.10 Desktop.
I need to urgently install Oracle 11gR2 on it.For what it's worth, if you can combine the two source below you should be able to install and run 11gR2 on Ubuntu 11.10.
Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
However, check out VirtualBox. -
Oracle Linux 6.0 64 bit instalation problem
Hi,
I downloaded Oracle Linux 6.0 64 bit from Oracle site. I unpacked it and burned it on dvd, but it can't boot so I can't install it. I could't do it even with virtual machine. I also put disk detection latency to 15 sec so I could give Linux enough time to boot, but it did't help. So any sugestion? :) I have core i7 2600 and Gigabyte UD4 P67 B3, bit I don't think it is a problem.
Thx
Edited by: MarcusO on 2011.03.30 00:15This directory contains image files used during the Oracle Linux 6
installation process.
The boot.iso file that is sometimes found in the images directory has
been removed for space reasons. It is available as a separate download
from ULN. boot.iso is an ISO 9660 image of a bootable CD-ROM. It is useful
in cases where the CD-ROM installation method is not desired, but the
CD-ROM's boot speed would be an advantage.
To use this image file, burn the file onto CD-R (or CD-RW) media as you
normally would.
From Images folder, installation DVD.
Can anyone tell me what to do -
Oracle Linux 6.2 Installation Issue
Basic Oracle Linux 6.2 installation problems.
There are two iso files supplied for the installation.
V29609-01.iso (install files)
V29610-01.iso (bootable disc)
I boot from V29610-01.iso and the setup files run fine.
I am then prompted to identify the location of the second disc.
I encountered a problem where my DVD drive door would not open to insert the second disc.
To work around this problem I created a partition on my hard disc to copy
the installation files for the second disc to.
I boot from windows 7 (my primary operating system) and copy the installation files from the disc
to the partition.
I reboot from V29610-01.iso.
When prompted to identify the location of the install disc/files on my hard drive
I selected the drive where I copied the files to and press <enter>
I receive a message that it cannot find the image disc there.
I shut down.
I boot from windows 7 and this time copy the actual disc image
V29609-01.iso there instead
I reboot from V29610-01.iso and repeat the same procedure.
It still can't locate the disc image.
(I noticed the boot disc always defaults to the following structure in its displayed path \image\image.img
for the image file that it is trying to locate)
I shutdown.
I boot from windows 7 and this time create a directory called image and
rename V29609-01.iso to image.img and copy it to the image directory. Still no luck.
Why can't it locate the disc image?
Thankyou@ O.P.,
What are you actually trying to accomplish? Replacing your Windows OS with dual boot Linux? In the later case I recommend you to use VirtualBox and forget about the old-fashioned and obsolete dual boot. Of course your system must not be older than 7 years with a x86_64 CPU and VT-x or AMD-d option. Why do you want to install a 32-bit OS?
Anyway, the V29609-01.iso install DVD is bootable. You will need to burn the .iso disk image doing a raw disk copy, but not the content of the mounted .iso image or you will loose the bootloader. There is plenty of information in Google searching for "burn iso image". If you use Virtualbox you can boot right of the disk image file without burning a DVD. -
Problem Installing Oracle Linux 6.3 - 'Disc not found message box'
I'm trying to install Oracle linux on a old laptop. Single disk drive.
I downloaded V33412-01Oracle Linux Release 6 Update 3 Boot iso image for x86_64 (64 bit)
burned it as an ISO image on a CD.
Inserted the CD,started the system, cd booted and the installation started.
Skipped the verify media (I verifed it during another installation try)
selected English
selected US
When prompted for installation method, I tried selecting 'LOCAL CD/DVD' since that's where my CD is at. I get a 'Disc not found message box'.
I've also tried to select the /dev/sda1, which the installation accepted, only to fail later saying it can't find the ISO image.
I also tried putting the ISO image and unzipping the contents of the file onto a USB stick and selcting this during the install - same error.
I tried putting V33413-01 onto the USB stick and selcting that - its too big to burn on a CD, that didn't work..
Any ideas here? Though this was a easy installation but I'm scratching my head as to how to continue?Not very clearly - for me at least.
Not sure - and not sure where to find instructions on how to do this.
It mentions that you don't need the source CDs
Oracle Linux Release 6 Update 3 source DVD 1 V33413-01 3.1G
Oracle Linux Release 6 Update 3 source DVD 2 V33414-01 1.7G
Not sure what to do with these anyway.
Installation
To install Oracle Linux 6.3 from DVD media, follow the following steps:
1. Download the compressed binary DVD images
Download Oracle Linux 6.3 DVD from the Oracle Software Delivery Cloud.
You do not need to download source DVDs to install Oracle Linux.
2. Verify the downloaded media
Verify the downloaded file by comparing its sha1sum or md5sum with the published
sha1sum or md5sum.
3. Write the DVD image to DVD
Use your favorite cd burning software to write these images directly to DVD.
You should not simply copy the files onto the DVD. You must use a DVD burner
that can accept an ISO image as input, and which can create a bootable DVD
from it. To test if you have burned the images correctly, insert a burned
DVD and ensure that multiple files and directories are visible.
6. Insert the DVD, and boot
Insert the DVD into your system, boot from DVD, and follow the on-screen instructions
to deploy Oracle Linux! -
Is it possible to install Oracle linux from usb?
Hi Guys,
Is it possible to install Oracle linux from usb? If yes, may I know the exact procedures to do so.
I am using linux ubuntu and I tried to make a bootable usb with the dvd iso of oracle linux 6 using Unetbootin software. The installation started well.
but after formatting the harddisk, I got an error as shown below
Missing ISO 9660 image
The installer has tried to mount image #1, but cannot find it on the hard drive.
I think ISO 9660 image is something connected with the CD image or something. But not sure...
Can anyone help me out with this situation.... Thank you..
Edited by: 839414 on Feb 24, 2011 12:47 AMHI
I know this is an old post but has anyone resolved this issue? I am trying to install OEL 6U4 via usb with no luck. Keep getting Missing ISO 9660 Image. I have tried all the tools under the sun to write it to USB, also tried copying the iso to the Boot disk.. as stated above... no luck ....
I have checked the installation files using md5 and they are fine... just in case downloaded it again as well as 6U3 and 6U0.
I have installed almost every version of linux there is... but OEL is definitely the most difficult and after 3 days, I am ready to give up. Any idea?
BTW. I am using utilities on windows 8 to write the iso to USB.
Thanks
P -
Oracle Linux 6.2 with RAC 11g cluster install fails on root.sh ioctl
I have 2 HP Servers I'm trying to install a cluster to.
I've tried Oracle Linux 6.2 and 6.3 with the same error on both nodes when running the root.sh script.
I have tried the permissions, run-levels, etc that I have found in the forum and nothing has worked except the deconfigure works great. /u01/app/11.2.0/grid/crs/install/rootcrs.pl -deconfig -force
root.sh Errors:
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start at /u01/app/11.2.0/grid/crs/install/rootcrs.pl line 443.
I can't see whats wrong, I did use ASM to configure iSCSI disks from a storage device which appeared to work correctly:
# oracleasm listdisks
VOL1
VOL2
VOL3
VOL5
# ls /dev/oracleasm/disks/
VOL1 VOL2 VOL3 VOL5
When I created the disks with ASM I used multipath successfuly:
# oracleasm createdisk VOL1 /dev/mapper/23535333762373932
The other node can see the disks just fine with oracleasm listdisks
I chose 3 disks for the OCR - VOL1-3
There was one forum work around to edit the $GRID_HOME/crs/install/s_crsconfig_lib.pm which I did no Oracle Linux 6.3 to no avail. I also tried using NFS mounted volumes for the OCR drives but got the same error.
Using the install: linux.x64_11gR2_gridoracleasm (aka asmlib) may not be supported on RHEL(OEL) 6.x. You do NOT need asmlib and it's days are numbered.
upon review of this document, even though it was for 10g, it still appears to be relevant
"10g: Using Openfiler iSCSI with an Oracle RAC database on Linux [ID 371434.1]"
and
udev utility can be used for disk mounting consistency between the nodes. It is the preferred tool. Note:371814.1 explains how to use the udev option.
and
Can't install GI 11gr2 (11.2.0.3) root.sh fail
Edited by: onedbguru on Dec 13, 2012 3:40 PM -
"Bad page state in process swapper" with Oracle Linux 5.9
Dear All,
We got "localhost kernel: BUG: Bad page state in process swapper pfn:5e13c2e" when booting Oracle Linux 5.9.
The system is installed with -
1. CPU: 2 x Xeon E5-2690
2. Mem: 384 GB
3. QLE 2562 FC
4. Oracle Linux 5.9 (64-bit) (2.6.39-300.26.1.el5uek)
5. mutlipath enabled
6. kernel created with (mkinitrd -v -f --with=sd-mod with=dm-multipath /boot/initrd-2.6.39-300.06.1.el5uek.img $(uname -r))
Below is part of the log file.
Did you have the idea what cause the issue?
Regards,
CL
Nov 1 11:03:04 localhost syslogd 1.4.1: restart.
Nov 1 11:03:04 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 1 11:03:04 localhost kernel: Initializing cgroup subsys cpuset
Nov 1 11:03:04 localhost kernel: Initializing cgroup subsys cpu
Nov 1 11:03:04 localhost kernel: Linux version 2.6.39-300.26.1.el5uek ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Thu Jan 3 18:31:38 PST 2013
Nov 1 11:03:04 localhost kernel: Command line: ro root=/dev/mapper/lun_osp3 rhgb quiet numa=off
Nov 1 11:03:04 localhost kernel: BIOS-provided physical RAM map:
Nov 1 11:03:04 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009a400 (usable)
Nov 1 11:03:04 localhost kernel: BIOS-e820: 000000000009a400 - 00000000000a0000 (reserved)
Nov 1 11:03:04 localhost kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Nov 1 11:03:04 localhost kernel: BIOS-e820: 0000000000100000 - 000000007df4c000 (usable)
Nov 1 11:03:04 localhost kernel: BIOS-e820: 000000007df4c000 - 000000007df89000 (reserved)
Nov 1 11:03:04 localhost kernel: BIOS-e820: 000000007df89000 - 000000007e01c000 (ACPI data)
Nov 1 11:03:04 localhost kernel: BIOS-e820: 000000007e01c000 - 000000007e240000 (ACPI NVS)
Nov 1 11:03:05 localhost kernel: BIOS-e820: 000000007e240000 - 000000007f34c000 (reserved)
Nov 1 11:03:05 localhost cpuspeed: Enabling ondemand cpu frequency scaling governor
Nov 1 11:03:05 localhost kernel: BIOS-e820: 000000007f34c000 - 000000007f800000 (ACPI NVS)
Nov 1 11:03:05 localhost kernel: BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
Nov 1 11:03:05 localhost kernel: BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
Nov 1 11:03:05 localhost kernel: BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Nov 1 11:03:05 localhost kernel: BIOS-e820: 0000000100000000 - 0000006080000000 (usable)
Nov 1 11:03:06 localhost kernel: NX (Execute Disable) protection: active
Nov 1 11:03:06 localhost kernel: SMBIOS 2.7 present.
Nov 1 11:03:06 localhost rpc.statd[5742]: Version 1.0.9 Starting
Nov 1 11:03:06 localhost kernel: No AGP bridge found
Nov 1 11:03:06 localhost kernel: last_pfn = 0x6080000 max_arch_pfn = 0x400000000
Nov 1 11:03:07 localhost hcid[5810]: Bluetooth HCI daemon
Nov 1 11:03:07 localhost hcid[5810]: Register path:/org/bluez fallback:1
Nov 1 11:03:07 localhost sdpd[5814]: Bluetooth SDP daemon
Nov 1 11:03:07 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Nov 1 11:03:07 localhost kernel: total RAM covered: 393216M
Nov 1 11:03:07 localhost kernel: Found optimal setting for mtrr clean up
Nov 1 11:03:07 localhost kernel: gran_size: 64K chunk_size: 64K num_reg: 9 lose cover RAM: 0G
Nov 1 11:03:07 localhost kernel: last_pfn = 0x7df4c max_arch_pfn = 0x400000000
Nov 1 11:03:07 localhost pcscd: pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
Nov 1 11:03:07 localhost kernel: found SMP MP-table at [ffff8800000fdb60] fdb60
Nov 1 11:03:07 localhost kernel: Using GB pages for direct mapping
Nov 1 11:03:07 localhost kernel: init_memory_mapping: 0000000000000000-000000007df4c000
Nov 1 11:03:07 localhost kernel: init_memory_mapping: 0000000100000000-0000006080000000
Nov 1 11:03:08 localhost pcscd: hotplug_libusb.c:402:HPEstablishUSBNotifications() Driver ifd-egate.bundle does not support IFD_GENERATE_HOTPLUG. Using active polling instead.
Nov 1 11:03:08 localhost pcscd: hotplug_libusb.c:411:HPEstablishUSBNotifications() Polling forced every 1 second(s)
Nov 1 11:03:07 localhost kernel: RAMDISK: 3795a000 - 37ff0000
Nov 1 11:03:08 localhost kernel: ACPI: RSDP 00000000000f0490 00024 (v02 ACRSYS)
Nov 1 11:03:08 localhost kernel: ACPI: XSDT 000000007dfa6090 0009C (v01 ACRSYS ACRPRDCT 00000001 AMI 00010013)
Nov 1 11:03:08 localhost kernel: ACPI: FACP 000000007dfafb10 000F4 (v04 ACRSYS ACRPRDCT 00000001 AMI 00010013)
Nov 1 11:03:08 localhost kernel: ACPI: DSDT 000000007dfa61b8 09956 (v02 ACRSYS ACRPRDCT 00000000 INTL 20091112)
Nov 1 11:03:08 localhost kernel: ACPI: FACS 000000007e23df80 00040
Nov 1 11:03:08 localhost kernel: ACPI: APIC 000000007dfafc08 00224 (v03 ACRSYS ACRPRDCT 00000001 AMI 00010013)
Nov 1 11:03:08 localhost kernel: ACPI: FPDT 000000007dfafe30 00044 (v01 ACRSYS ACRPRDCT 00000001 AMI 00010013)
Nov 1 11:03:08 localhost kernel: ACPI: SRAT 000000007dfafe78 004B0 (v01 A M I AMI SRAT 00000001 AMI. 00000000)
Nov 1 11:03:08 localhost kernel: ACPI: SLIT 000000007dfb0328 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000)
Nov 1 11:03:08 localhost kernel: ACPI: HPET 000000007dfb0358 00038 (v01 ACRSYS ACRPRDCT 00000001 AMI. 00000005)
Nov 1 11:03:08 localhost kernel: ACPI: PRAD 000000007dfb0390 000BE (v02 PRADID PRADTID 00000001 MSFT 04000000)
Nov 1 11:03:08 localhost kernel: ACPI: SPMI 000000007dfb0450 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
Nov 1 11:03:08 localhost kernel: ACPI: SSDT 000000007dfb0490 6B344 (v02 INTEL CpuPm 00004000 INTL 20091112)
Nov 1 11:03:08 localhost kernel: ACPI: EINJ 000000007e01b7d8 00130 (v01 AMI AMI EINJ 00000000 00000000)
Nov 1 11:03:08 localhost kernel: ACPI: ERST 000000007e01b908 00230 (v01 AMIER AMI ERST 00000000 00000000)
Nov 1 11:03:08 localhost kernel: ACPI: HEST 000000007e01bb38 000A8 (v01 AMI AMI HEST 00000000 00000000)
Nov 1 11:03:08 localhost kernel: ACPI: BERT 000000007e01bbe0 00030 (v01 AMI AMI BERT 00000000 00000000)
Nov 1 11:03:08 localhost kernel: ACPI: DMAR 000000007e01bc10 00178 (v01 A M I OEMDMAR 00000001 INTL 00000001)
Nov 1 11:03:08 localhost kernel: ACPI: MCFG 000000007e01bd88 0003C (v01 ACRSYS ACRPRDCT 00000001 MSFT 00000097)
Nov 1 11:03:08 localhost kernel: NUMA turned off
Nov 1 11:03:09 localhost kernel: Faking a node at 0000000000000000-0000006080000000
Nov 1 11:03:09 localhost kernel: Initmem setup node 0 0000000000000000-0000006080000000
Nov 1 11:03:09 localhost kernel: NODE_DATA [000000607ffd9000 - 000000607fffffff]
Nov 1 11:03:09 localhost kernel: Zone PFN ranges:
Nov 1 11:03:09 localhost kernel: DMA 0x00000010 -> 0x00001000
Nov 1 11:03:09 localhost kernel: DMA32 0x00001000 -> 0x00100000
Nov 1 11:03:09 localhost kernel: Normal 0x00100000 -> 0x06080000
Nov 1 11:03:09 localhost kernel: Movable zone start PFN for each node
Nov 1 11:03:09 localhost kernel: early_node_map[3] active PFN ranges
Nov 1 11:03:09 localhost kernel: 0: 0x00000010 -> 0x0000009a
Nov 1 11:03:09 localhost kernel: 0: 0x00000100 -> 0x0007df4c
Nov 1 11:03:09 localhost kernel: 0: 0x00100000 -> 0x06080000
Nov 1 11:03:10 localhost kernel: ACPI: PM-Timer IO Port: 0x408
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled)
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled)
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] enabled)
Nov 1 11:03:10 localhost kernel: ACPI: LAPIC (acpi_id[0x18] lapic_id[0x28] enabled)
Nov 1 11:03:11 localhost kernel: ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x2a] enabled)
Nov 1 11:03:11 localhost kernel: ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x2c] enabled)
Nov 1 11:03:11 localhost kernel: ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x2e] enabled)
Nov 1 11:03:11 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Nov 1 11:03:11 localhost kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Nov 1 11:03:11 localhost kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
Nov 1 11:03:12 localhost kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Nov 1 11:03:12 localhost kernel: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
Nov 1 11:03:12 localhost kernel: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
Nov 1 11:03:12 localhost kernel: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
Nov 1 11:03:12 localhost kernel: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
Nov 1 11:03:12 localhost kernel: ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] enabled)
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC (acpi_id[0x19] lapic_id[0x29] enabled)
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x2b] enabled)
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x2d] enabled)
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x2f] enabled)
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
Nov 1 11:03:13 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
Nov 1 11:03:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
Nov 1 11:03:15 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
Nov 1 11:03:15 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
Nov 1 11:03:15 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
Nov 1 11:03:15 localhost hidd[5960]: Bluetooth HID daemon
Nov 1 11:03:15 localhost kernel: ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
Nov 1 11:03:15 localhost kernel: IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
Nov 1 11:03:15 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
Nov 1 11:03:15 localhost kernel: IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
Nov 1 11:03:15 localhost kernel: ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48])
Nov 1 11:03:15 localhost kernel: IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
Nov 1 11:03:15 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 1 11:03:15 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 1 11:03:15 localhost kernel: Using ACPI (MADT) for SMP configuration information
Nov 1 11:03:15 localhost kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
Nov 1 11:03:15 localhost kernel: SMP: Allowing 32 CPUs, 0 hotplug CPUs
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 000000000009a000 - 000000000009b000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 000000007df4c000 - 000000007df89000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 000000007df89000 - 000000007e01c000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 000000007e01c000 - 000000007e240000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 000000007e240000 - 000000007f34c000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 000000007f34c000 - 000000007f800000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 000000007f800000 - 0000000080000000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 0000000080000000 - 0000000090000000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
Nov 1 11:03:16 localhost kernel: PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Nov 1 11:03:16 localhost automount[5994]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
Nov 1 11:03:16 localhost kernel: Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
Nov 1 11:03:16 localhost kernel: Booting paravirtualized kernel on bare hardware
Nov 1 11:03:17 localhost kernel: setup_percpu: NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
Nov 1 11:03:17 localhost kernel: PERCPU: Embedded 26 pages/cpu @ffff88607f200000 s77440 r8192 d20864 u131072
Nov 1 11:03:17 localhost kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 99271377
Nov 1 11:03:17 localhost kernel: Policy zone: Normal
Nov 1 11:03:17 localhost kernel: Kernel command line: ro root=/dev/mapper/lun_osp3 rhgb quiet numa=off
Nov 1 11:03:17 localhost kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Nov 1 11:03:17 localhost kernel: xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Nov 1 11:03:17 localhost kernel: Checking aperture...
Nov 1 11:03:17 localhost kernel: No AGP bridge found
Nov 1 11:03:17 localhost kernel: Queued invalidation will be enabled to support x2apic and Intr-remapping.
Nov 1 11:03:17 localhost kernel: BUG: Bad page state in process swapper pfn:5e13c2e
Nov 1 11:03:18 localhost kernel: page:ffffea0149452a10 count:0 mapcount:0 mapping: (null) index:0x0
Nov 1 11:03:18 localhost kernel: page flags: 0x20000000000080(slab)
Nov 1 11:03:18 localhost kernel: Pid: 0, comm: swapper Not tainted 2.6.39-300.26.1.el5uek #1
Nov 1 11:03:19 localhost kernel: Call Trace:
Nov 1 11:03:19 localhost kernel: [<ffffffff811147dd>] bad_page+0x9d/0x120
Nov 1 11:03:19 localhost gpm[6080]: *** info [startup.c(95)]:
Nov 1 11:03:19 localhost kernel: [<ffffffff81114923>] free_pages_prepare+0xc3/0x100
Nov 1 11:03:19 localhost gpm[6080]: Started gpm successfully. Entered daemon mode.
Nov 1 11:03:19 localhost kernel: [<ffffffff81118a82>] __free_pages_ok+0x32/0xf0
Nov 1 11:03:19 localhost kernel: [<ffffffff81118b60>] __free_pages+0x20/0x30
Nov 1 11:03:19 localhost kernel: [<ffffffff815045b6>] __free_pages_bootmem+0x66/0x90
Nov 1 11:03:19 localhost kernel: [<ffffffff819f13c1>] __free_pages_memory+0x101/0x170
Nov 1 11:03:19 localhost kernel: [<ffffffff819f1487>] free_all_memory_core_early+0x57/0x70
Nov 1 11:03:19 localhost kernel: [<ffffffff81514605>] ? bad_to_user+0x76f/0x76f
Nov 1 11:03:19 localhost avahi-daemon[6171]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
Nov 1 11:03:19 localhost kernel: [<ffffffff819e41a7>] numa_free_all_bootmem+0x87/0xa0
Nov 1 11:03:19 localhost avahi-daemon[6171]: Successfully dropped root privileges.
Nov 1 11:03:20 localhost kernel: [<ffffffff819e227b>] mem_init+0x3b/0x110
Nov 1 11:03:20 localhost avahi-daemon[6171]: avahi-daemon 0.6.16 starting up.
Nov 1 11:03:20 localhost kernel: [<ffffffff819c4140>] ? early_idt_handlers+0x140/0x140
Nov 1 11:03:20 localhost avahi-daemon[6171]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Nov 1 11:03:20 localhost kernel: [<ffffffff819c4140>] ? early_idt_handlers+0x140/0x140
Nov 1 11:03:20 localhost kernel: [<ffffffff819c4779>] mm_init+0x9/0x20
Nov 1 11:03:20 localhost avahi-daemon[6171]: Successfully called chroot().
Nov 1 11:03:20 localhost kernel: [<ffffffff819c4ec5>] start_kernel+0x145/0x390It could be a hardware issue. I suggest to run Memtest. You can download a free stand-alone disk image, which you can burn to CD from here:
http://www.memtest86.com/download.htm
Then burn the iso disk image and restart the computer from the appropriate media. Be sure to follow the instructions of your CD/DVD software to properly burn .ISO images. There is plenty of info on the web. -
Compiling VMtools on Oracle Linux 6.2 gives errors
I am trying to compile the vmtools on a Oracle Linux 6.2 VMware installation. I'm getting strange compilation errors on all the vmtools. Log pasted below.
I have found thread VMware Tools and Oracle Linux Howto and followed the items in there with no help and no change.
yum -y install kernel-headers is all up to date
yum -y install kernel-devel is all up to date
Here are the issues I see:
1. Compiling the shared folder says linux/smp_lock.h does not exist, and then fails with SPIN_LOCK_UNLOCKED undeclared and unknow field `get_sb'
2. The network device driver fails in vmxnet.c
3. The vmblock module fails in dentry.c
4. The communication service fails in vmci_drv.c
5. The VM communication interface fails in vmci_drv.c
6. The X configuration is skipped because there are "no drivers for X.ora version: 7.9.6" (see the bottom of the log below).
start of pasted log
========================================================
[root@vdev-oem bin]# ./vmware-config-tools.pl
Initializing...
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: [ OK ]
Virtual Printing daemon: [ OK ]
Unmounting HGFS shares: [ OK ]
Guest filesystem driver: [ OK ]
The module vmmemctl has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmmemctl to override.
Before you can compile modules, you need to have the following installed...
make
gcc
kernel headers of the running kernel
Searching for GCC...
Detected GCC binary at "/usr/bin/gcc".
The path "/usr/bin/gcc" appears to be a valid path to the gcc binary.
Would you like to change it? [no]
Searching for a valid kernel header path...
Detected the kernel headers of the running kernel at
"/lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include".
The path "/lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include" appears to
be a valid path to the kernel headers of the running kernel.
Would you like to change it? [no]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmhgfs-only'
make -C /lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
CC [M] /tmp/vmware-root/modules/vmhgfs-only/backdoor.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/backdoorGcc64.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/bdhandler.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpName.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpNameLite.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/dentry.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/dir.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/file.o
/tmp/vmware-root/modules/vmhgfs-only/file.c:120: warning: initialization from incompatible pointer type
CC [M] /tmp/vmware-root/modules/vmhgfs-only/filesystem.o
/tmp/vmware-root/modules/vmhgfs-only/filesystem.c:48:28: error: linux/smp_lock.h: No such file or directory
/tmp/vmware-root/modules/vmhgfs-only/filesystem.c:72: error: âSPIN_LOCK_UNLOCKEDâ undeclared here (not in a function)
/tmp/vmware-root/modules/vmhgfs-only/filesystem.c:137: error: unknown field âget_sbâ specified in initializer
/tmp/vmware-root/modules/vmhgfs-only/filesystem.c:137: warning: initialization from incompatible pointer type
/tmp/vmware-root/modules/vmhgfs-only/filesystem.c: In function âHgfsGetSbâ:
/tmp/vmware-root/modules/vmhgfs-only/filesystem.c:493: error: implicit declaration of function âget_sb_nodevâ
make[2]: *** [tmp/vmware-root/modules/vmhgfs-only/filesystem.o] Error 1
make[1]: *** [_module_/tmp/vmware-root/modules/vmhgfs-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
make: *** [vmhgfs.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only'
The filesystem driver (vmhgfs module) is used only for the shared folder
feature. The rest of the software provided by VMware Tools is designed to work
independently of this feature.
If you wish to have the shared folders feature, you can install the driver by
running vmware-config-tools.pl again after making sure that gcc, binutils, make
and the kernel sources for your running kernel are installed on your machine.
These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmxnet-only'
make -C /lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
CC [M] /tmp/vmware-root/modules/vmxnet-only/vmxnet.o
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c: In function âvmxnet_probe_deviceâ:
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:1007: error: âvmxnet_change_mtuâ undeclared (first use in this function)
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:1007: error: (Each undeclared identifier is reported only once
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:1007: error: for each function it appears in.)
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c: In function âvmxnet_load_multicastâ:
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:2915: error: âstruct net_deviceâ has no member named âmc_listâ
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:2925: error: âstruct net_deviceâ has no member named âmc_countâ
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:2926: error: dereferencing pointer to incomplete type
/tmp/vmware-root/modules/vmxnet-only/vmxnet.c:2927: error: dereferencing pointer to incomplete type
make[2]: *** [tmp/vmware-root/modules/vmxnet-only/vmxnet.o] Error 1
make[1]: *** [_module_/tmp/vmware-root/modules/vmxnet-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
make: *** [vmxnet.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmxnet-only'
The fast network device driver (vmxnet module) is used only for our fast
networking interface. The rest of the software provided by VMware Tools is
designed to work independently of this feature.
If you wish to have the fast network driver enabled, you can install the driver
by running vmware-config-tools.pl again after making sure that gcc, binutils,
make and the kernel sources for your running kernel are installed on your
machine. These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmblock-only'
make -C /lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/block.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/control.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/dbllnklst.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/dentry.o
/tmp/vmware-root/modules/vmblock-only/linux/dentry.c: In function âDentryOpRevalidateâ:
/tmp/vmware-root/modules/vmblock-only/linux/dentry.c:107: error: implicit declaration of function âpath_lookupâ
make[2]: *** [tmp/vmware-root/modules/vmblock-only/linux/dentry.o] Error 1
make[1]: *** [_module_/tmp/vmware-root/modules/vmblock-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
make: *** [vmblock.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmblock-only'
The vmblock module enables dragging or copying files from within a host and
dropping or pasting them onto your guest (host to guest drag and drop and file
copy/paste). The rest of the software provided by VMware Tools is designed to
work independently of this feature (including guest to host drag and drop and
file copy/paste).
If you would like the host to guest drag and drop and file copy/paste features,
you can install the driver by running vmware-config-tools.pl again after making
sure that gcc, binutils, make and the kernel sources for your running kernel
are installed on your machine. These packages are available on your
distribution's installation CD.
[ Press Enter key to continue ]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmci-only'
make -C /lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
CC [M] /tmp/vmware-root/modules/vmci-only/vmciDatagram.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciEvent.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciGuestDs.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciGuestKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciProcess.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciQueuePair.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciUtil.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmci_drv.o
/tmp/vmware-root/modules/vmci-only/vmci_drv.c:91: error: unknown field âioctlâ specified in initializer
/tmp/vmware-root/modules/vmci-only/vmci_drv.c:91: warning: initialization from incompatible pointer type
/tmp/vmware-root/modules/vmci-only/vmci_drv.c: In function âvmci_initâ:
/tmp/vmware-root/modules/vmci-only/vmci_drv.c:151: error: implicit declaration of function âinit_MUTEXâ
make[2]: *** [tmp/vmware-root/modules/vmci-only/vmci_drv.o] Error 1
make[1]: *** [_module_/tmp/vmware-root/modules/vmci-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
make: *** [vmci.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmci-only'
The communication service is used in addition to the standard communication
between the guest and the host. The rest of the software provided by VMware
Tools is designed to work independently of this feature.
If you wish to have the VMCI feature, you can install the driver by running
vmware-config-tools.pl again after making sure that gcc, binutils, make and the
kernel sources for your running kernel are installed on your machine. These
packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmci-only'
make -C /lib/modules/2.6.39-200.24.1.el6uek.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
CC [M] /tmp/vmware-root/modules/vmci-only/vmciDatagram.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciEvent.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciGuestDs.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciGuestKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciProcess.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciQueuePair.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciUtil.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmci_drv.o
/tmp/vmware-root/modules/vmci-only/vmci_drv.c:91: error: unknown field âioctlâ specified in initializer
/tmp/vmware-root/modules/vmci-only/vmci_drv.c:91: warning: initialization from incompatible pointer type
/tmp/vmware-root/modules/vmci-only/vmci_drv.c: In function âvmci_initâ:
/tmp/vmware-root/modules/vmci-only/vmci_drv.c:151: error: implicit declaration of function âinit_MUTEXâ
make[2]: *** [tmp/vmware-root/modules/vmci-only/vmci_drv.o] Error 1
make[1]: *** [_module_/tmp/vmware-root/modules/vmci-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.39-200.24.1.el6uek.x86_64'
make: *** [vmci.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmci-only'
The VM communication interface socket family is used in conjunction with the VM
communication interface to provide a new communication path among guests and
host. The rest of this software provided by VMware Tools is designed to work
independently of this feature. If you wish to have the VSOCK feature you can
install the driver by running vmware-config-tools.pl again after making sure
that gcc, binutils, make and the kernel sources for your running kernel are
installed on your machine. These packages are available on your distribution's
installation CD.
[ Press the Enter key to continue.]
The module vmxnet3 has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmxnet3 to override.
The module pvscsi has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=pvscsi to override.
Detected X.org version 7.9.6.
No drivers for X.org version: 7.9.6.
Skipping X configuration because X drivers are not included.
Creating a new initrd boot image for the kernel.
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: [ OK ]
Guest operating system daemon: [ OK ]
Virtual Printing daemon: [ OK ]
The configuration of VMware Tools 8.3.2 build-257589 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an X server session.
To enable advanced X features (e.g., guest resolution fit, drag and drop, and
file and text copy/paste), you will need to do one (or more) of the following:
1. Manually start /usr/bin/vmware-user
2. Log out and log back into your desktop session; and,
3. Restart your X session.
Enjoy,
--the VMware teamActually, I did exactly that:
yum -y install gcc
yum -y install kernel-uek-devel-`uname -r`
yum -y install kernel-uek-headers-`uname -r`
The headers with the uname gave an error that the headers do not exist. The others ran fine.
I did:
yum -y install kernel-uek-headers
and that worked.
However, NONE of this changed the errors - they were exactly the same before and after. The problem is still not resolved.
However, I did try a different approach. I found the VMware Operating System Packages (OSPs) through the following link: http://www.vmware.com/download/packages.html. I installed that, and it seemed to work fine.
The problem that we had, which was the original reason why I wanted to have the VMware tools, was that the disk was sized too small and I thought with the tools we could resize the disk. It didn't work, we could not edit the size in the VMware console. So we ended up blowing away that VM and are in the process of recreating it at a larger size. I'll take a snapshot of the state before the OSP install so I can test the compile version in case someone posts something useful here. -
Find out the devices of an ASM Diskgroup in Oracle Linux
Hi
I want to drop an ASM Diskgroup and I want to find out what are the devices attached to that Disk group that I am going to drop.
I am in RAC 10.2.0.4 on Oracle Linux
When I query with this:
SELECT name, header_status, path FROM V$ASM_DISK;
The column path says:
ORCL:FRA1
ORCL:FRA2
but really what I want to know what is the real device in the OS that represent that ASM Disk.
How can i find out the name of my real devices ?
ThanksI thought you were supposed to run this query when connected to the ASM instance, not the regular instance. But I tried it here and it works fine with my regular instances:
SQL> SELECT name, header_status, path FROM V$ASM_DISK;
NAME HEADER_STATUS PATH
ASMDG01_0005 MEMBER /dev/raw/raw6
ASMDG01_0004 MEMBER /dev/raw/raw5
ASMDG01_0002 MEMBER /dev/raw/raw3
ASMDG01_0003 MEMBER /dev/raw/raw4
ASMDG01_0000 MEMBER /dev/raw/raw1
ASMDG01_0001 MEMBER /dev/raw/raw2
FORMER /dev/raw/raw7
FORMER /dev/raw/raw8
FORMER /dev/raw/raw9Edited by: marcusrangel on Jun 26, 2012 6:05 PM
Maybe you are looking for
-
I updated itunes to version 11.0 and now it will not open and says it is corrupted?
i updated itunes to version 11.0 and now it will not open and says it is corrupted? how do i get it to work it updated fine then asked to restart comp so i did now it will not open
-
IPad air, links in email won't open
I did General/Restrictions , it said enabled, but as per suggestions I disabled then enabled, then shut down for 2 minutes. It did not solve the problem
-
Bad USB mic quality with Vista and 4GB *F
Finally. After spending many, many nights up until the AM searching and troubleshooting I've finally found a solution to my problem. The problem being awful mic quality on my Vista 64, 4GB machine with my Logictech USB mic. The solution has come in a
-
Hi, I intend to create a custom policy step for OWSM. In the execute method of my step (that extends AbstractStep) I want to set the Response Message using the setResponseMessage() method. According to the Extensibility Guide, this method should be p
-
Saving back to tha DB from an down loaded XLS
Hi, In my application from a JSP I need to genarate some reports and user will be able to export that data to XL. Once after viewing it , he will be editing some data and then the requirement is that he should be able to save the new data back to Dat