Oracle Mobile Server 10g, where to download?

Hi,
I can't find where to download it?

Same thing. You need mobile server to perform the replication and create the oracle lite database. You can use it at as a stand-alone database without the replication, but if you are looking to use it as a stand-alone database, I recommend going with Oracle PE or XE.

Similar Messages

  • Oracle Application Server 10g Enterprise Edition

    Hi,
    I would like to integrate Oracle E-Business Suite Release 12.1.1 with Oracle Portal.
    Idid some research in metalink and found that Note: 376811.1.
    What I understood from the doc is,
    1. install Oracle Application Server 10g Enterprise Edition.
    2. Integrate with EBiz 12.1.1.
    Please let me know where can I get the link to download, Oracle Application Server 10g (10.1.4) Enterprise Edition.
    Is it required to install OID and SSO before oracle portal installation?
    A step by step solution/documentation to integrate 12.1.1 with portal will highly be appreciated.
    Thanks and Regards,
    DIP

    Idid some research in metalink and found that Note: 376811.1.
    What I understood from the doc is,
    1. install Oracle Application Server 10g Enterprise Edition.
    2. Integrate with EBiz 12.1.1.
    Please let me know where can I get the link to download, Oracle Application Server 10g (10.1.4) Enterprise Edition.
    - download and install OAS 10.1.2.0.2
    --> Go to this link: http://www.oracle.com/technology/software/products/middleware/index.html
    --> download Application Server 10gR2 (10.1.2.0.2) from the right side portlet of Previous Releases
    - then upgrade its portal to 10.1.4:
    --> go to metalink/MOS: search for 'oracle portal upgrade master note' and follow the note that matches best
    Is it required to install OID and SSO before oracle portal installation?- Yes it is. It will be included in the OAS 10.1.2.0.2 installation
    >
    A step by step solution/documentation to integrate 12.1.1 with portal will highly be appreciated.
    Go to MOS/metalink: search for 'Installing Oracle Application Server 10g with Oracle E-Business Suite' and follow the note
    that should be all you need.
    hope that helps!
    AMN

  • How to start the oracle application server 10g

    Hi..
    I have Installed Oracle application server 10g but I am not able to start and dploy the forms in the server.

    Please see this link for the proper order to [start and stop application server 10g|http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/start.htm#i1014590].
    If you encounter any errors, do not forget to give exact description of errors, their exact error message and codes, where do you get them and what have you done recently. Please also do not forget to include your complete product version.
    thanks,
    AMN

  • ORACLE APPLICATION SERVER 10G R2...64BIT??

    From where can i download ORACLE APPLICATION SERVER 10G R2...64BIT for Windows 2003 Server

    Hi,
    Please see these links.
    Oracle Application Server 10g Release 2 (10.1.2.0.2)
    http://www.oracle.com/technetwork/middleware/ias/downloads/101202-095224.html
    Oracle e-Delivery website
    http://edelivery.oracle.com/
    Thanks,
    Hussein

  • Embedded License Resource Kit for Oracle Application Server 10g

    Hi,
    I work for a company and we are an Oracle partner. We would like to deliver our flagship product with Oracle Database and Application Server (10g) embedded.
    According to an Oracle press release back in october 2003, Embedded License Resource Kits for Oracle Database and Oracle Application Server are available through the Oracle Partner Network (http://www.oracle.com/corporate/press/2484668.html)
    I found a kit for Oracle Database through OPN but was not able to find one for Oracle Application Server 10g.
    Does such a kit still exist for Oracle Application Server, and if yes where can I download it?

    Go to MyOracleSupport/Metalink.
    Click patches and Updates on the top left bar. Download the patches.
    Each patch comes with its readme.txt. Do read it. It shows you how to install the patch. it also gives syntax with example for various scenarios of how to install it, or remove a patch either. In most of the patches, Installing a patch again does not hurt your system.
    It's a good practice to keep db inventory clean before attempting to install the patch because otherwise the patch installation will fail.
    hope that helps!
    AMN

  • Oracle Application Server 10g Cloning - Urgent

    Hello All,
    I have been given a new assignment which involves Oracle Applications server 10g, i am new to oracle application server and hoping that some one will please clarify my doubts.
    i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
    1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
    2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?
    Eagerly waiting for a reply

    user12077492 wrote:
    i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
    1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
    2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?1) Yes, it is possible. The DB that comes with OAS as the infrastructure DB for it (I presume you are installing a full OAS with infrastructure and midtier both) does not affect the DB you already have on your system ... obviously ... as long as you install them in their separate homes.
    2) I always say, this term cloning is somewhat loosely used in general communication meaning making copies. In OAS context, Cloning works for middletiers only. You cannot clone an infrastructure.
    To make a redundant/alternate environment for OAS, you can do the following:
    - a) either use the same infra on machine 1, and install another midtier and register with the same infra.
    - b) or install a separate infra on machine 2, and also a midtier registered with it.
    Here for the first option a), Cloning can be used because you can (*only*) clone a middle-tier. There are pros and cons for this setup, including that you share the SSO, and OID, and hence users and groups bases, etc on those two environments - something that you may or may not want. But then there are also some way-outs to avoid them or minimize their effects too. Please see the following reference for cloning and search on Metalink for how to minimize effects, once you get better familiar with the processes.
    Oracle® Application Server Administrator's Guide
    10g Release 2 (10.1.2)
    B13995-08
    [10 Cloning Application Server Middle-Tier Instances|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/cloning.htm#BCGBDIDF]
    For b), you will need to Stage a server as defined in this reference.
    [11 Staging a Test Environment from a Production Environment|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/prodtest.htm]
    There are some notes on Metalink which address issues about benefits or procedures of Cloning and Staging an environment too.
    There are some other ways to export/transport your applications to another instance across DB. Please also read about them.
    hope that helps!
    AMN

  • Oracle application server 10g help

    Hi,
    I need to work on a project that pulls data from the oracle database and should be able to generate reports based on user entered criteria and they want me to use the oracle application server 10g.
    (I also need to do manipulations on the data pulled out.)
    How do i start and what are the things that i need to install..
    If somebody could guide me in a few words, i can pick it up from there...
    Thanks

    Hi,
    Thanks a lot for replying..
    This is a simple overview of my project..
    Basically i need to convert a client server application which was initially in Access (and coded in VBA) and oracle to oracle based web application.
    The application that was built in access has various flaws and hence we decided to rewrite them with lot of new features..
    what i would need is several web pages(probably intranet based...) where i pull data from the oracle db, and then do manipulations on them and then based on certain criteria come up with a report based on users needs...
    I hope this info is enough to guide me
    Thanks.

  • Oracle Application Server 10g (Application Running)

    Dear All Sir/Madam
    It is my humble request that please tell me how to run Application on Application Server 10g.
    I developed my Application in Oracle developer suit 10g (build internet appliacation), and I am using *10g database*.
    Now please tell me the complete procedure who to configure oracle application server 10g on linux.

    Hello Ghulam,
    Notice that you can deploy different kind of applications within the Application Server framework, e.g. JEE applications, PL/SQL applications, Forms Applications etc. Based on what you initially mentioned, it seems that your have developed a Forms application. The above document reference refers to Application Server 10.1.3, which was a JEE / SOA release. You are probably better off with the [url http://download.oracle.com/docs/cd/B14099_18/web.1012/b14032/toc.htm]Forms Deployment Guide.
    One note : Application Server 10.1.2.x is soon to be desupported. Consider to move to version [url http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html]11.1.2 !
    Thanks,
    EJ

  • Oracle Application Server 10g Installation Guide for Windows

    The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
    How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

    Hi,
    The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
    Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
    The Docs are located under the Documentation tab.
    Alternatively, here is the direct link to the Documentation Tab interface of the Library:
    http://download.oracle.com/docs/cd/B10468_04/docs.htm
    Regards,
    Les

  • Oracle application server 10g and apex

    Hi allm
    Can someone show me a guide on how to use Oracle Application Server 10g with APEX. I'm currently using Oracle HTTP Server but decided to use OAS instead so that I can use the Report Server and the Oracle BI Publisher for the reports.
    I'm currently using this guide (http://www.oracle.com/technology/products/database/application_express/howtos/howto_useoas10g.html) but I can't seem to find the marvel.conf and the oracle_apache.conf.
    Also, is it really necessary to use OAS instead of Oracle HTTP Server if I want to use Oracle BI Publisher?
    Thanks.
    Allen
    Edited by: A.Sandiego on Sep 3, 2008 12:01 AM

    Hi,
    Thanks for the response.
    Unfortunately I still get the same problem. Somehow I just can't find the marvel.conf anywhere in my machine. I setup my APEX not by using the companion cd but by downloading the apex_3.1.2 then running the apexins.sql. Then install the Oracle HTTP Server only and configured the dads.conf located in the ORACLE_HTTP_SERVER_HOME/Apache/Apache/mod_plsql/conf. It works perfectly with this.
    I then installed Oracle Application Server 10g. I'm trying to figure out how to use this instead of the Oracle HTTP Server.
    Thanks.
    Allen

  • Oracle Application Server 10g R3 with patch set 10.1.3.5.0

    Hi All,
    Can anyone help me on this, When I install Oracle Application Server 10g Release 3 (10.1.3.1.0) and patch set 10.1.3.5.0 on Linux. I am not able to find forms and reports container.
    This version doesn't support forms and reports or I have go OAS 10g R2 (10.1.2.0.2) with patch set 3 (10.1.2.3.0). What is the difference between these two releases.
    Please help me.
    Regards,

    Hi James,
    1)Yes it supports IE 8 .Please review the below link for certification details on browers :-
        http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BAJGCBEA
         Note: Oracle Application Server supports only those browsers.
    2)Forms only support Windows 7 32 bit only.
        Please refer to the note:1292919.1 "Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)"
    3)Could you provide more information of JVM because when you install 10gR2 it has JDK and JRE present in it.
    Regards,
    Prakash.

  • Deploying  Jave portlet on Oracle Application Server 10g

    I have installed Oracle 10g Application server, donwloaded and installed JDevleoper 9.0.5.1 and the latest Java Portal Development and as well as the JDeveloper portlet-addin. Now, I followed the instructions from the http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/BUILD.JSR168.PORTLETS.USING.JAVA.PORTLET.WIZARD.9IJDEVELOPER.HTML
    On using JDeveloper addin wizrd to create a java portlet and so far so good. However, I am stuff on the last bit on deployment. It document says "# Now use the URL provided in the log page at the bottom of JDeveloper to get part of your URL (e.g. http://myserver.uk.oracle.com:8888/my-portlet) and complete the URL.
    http://myserver.uk.oracle.com:8888/my-portlet/portlets?WSDL
    Now use this URL to register your portlet with OracleAS Portal.
    But when i deploy my application (just a test thing), from the deployment tab I get:
    ---- Deployment started. ---- 22-Mar-2005 14:11:27
    Target platform is Oracle Application Server 10g (hotseatConnection).
    Wrote WAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.war
    Wrote EAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear
    Invoking DCM servlet client...
    C:\Java\j2sdk1.4.2_03\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Java\JDeveloper9.0.5.1\jdev\lib\oc4j_remote_deploy.jar http://194.83.41.114:1811/Oc4jDcmServletAPI/ ias_admin **** redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat
    Initializing log
    Servlet interface for OC4J DCM commands
    Command timeout defined at 600 seconds
    Executing DCM command...
    Executing command redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat UNDEFINED
    Command = REDEPLOY
    Reading application's ear file
    Ear file was successfully read
    Opening connection to Oc4jDcmServlet
    Setting userName to ias_admin
    Sending command to DCM servlet
    HTTP response code = 200, HTTP response msg = OK
    Command was successfully sent to Oc4jDcmServlet
    Receiving session id from servlet to check command status
    Session id = c253297271317c3f930003c405ea91ff598582f0be0
    Please, wait for command to finish...
    Checking command status...
    Setting userName to ias_admin
    Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
    Checking command status
    HTTP response code = 200, HTTP response msg = OK
    Command has not finished yet
    Checking command status...
    Setting userName to ias_admin
    Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
    Checking command status
    HTTP response code = 200, HTTP response msg = OK
    Command has not finished yet
    Checking command status...
    Setting userName to ias_admin
    Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
    Checking command status
    HTTP response code = 200, HTTP response msg = OK
    Command has not finished yet
    Checking command status...
    Setting userName to ias_admin
    Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
    Checking command status
    HTTP response code = 200, HTTP response msg = OK
    Command has not finished yet
    Checking command status...
    Setting userName to ias_admin
    Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
    Checking command status
    HTTP response code = 200, HTTP response msg = OK
    Command has not finished yet
    Checking command status...
    Setting userName to ias_admin
    Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
    Checking command status
    HTTP response code = 200, HTTP response msg = OK
    Command has not finished yet
    Checking command status...
    Setting userName to ias_admin
    Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
    Checking command status
    HTTP response code = 200, HTTP response msg = OK
    Command has not finished yet
    Checking command status...
    Setting userName to ias_admin
    Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
    Checking command status
    HTTP response code = 200, HTTP response msg = OK
    Command has not finished yet
    Checking command status...
    Setting userName to ias_admin
    Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
    Checking command status
    HTTP response code = 200, HTTP response msg = OK
    Command has not finished yet
    Checking command status...
    Setting userName to ias_admin
    Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
    Checking command status
    HTTP response code = 200, HTTP response msg = OK
    Command has finished
    Receiving command exit value
    Receiving command output
    **** No output was received from command
    Closing connection to Oc4jDcmServlet
    DCM command completed successfully.
    Output:
    Exit status of DCM servlet client: 0
    Elapsed time for deployment: 1 minute, 45 seconds
    ---- Deployment finished. ---- 22-Mar-2005 14:13:12
    My question is, HOW DO I ACCESS the deployed application, since it didn't specify the URL where it's deployed????
    Many thanks
    P/S
    I have tried:
    http://{myserver}:8888/{my-portlet}/portlets?WSDL but that doesn't work

    Hi FormsEleven,
    When you say you can do this or you have done for demo then considering following directory structure if I have two forms having common form names how it will be resolved?
    Or how the url to access these forms will be?
    As shown in the following structure consider we have Form1 in sub directory1 as well as in sub-directory2 then how the link to access these forms will be?
    - Hosting Directory (formsweb.cfg entry)
      - Sub Directory1
          - Form1
          - Form2 
      - Sub Directory2
          - Form1
          - Form4
      - Sub Directory3
          - Form5
          - Form6

  • Oracle Application Server 10g Forms and Reports Services

    Hi there,
    I want to install Oracle Application Server 10g Forms and Reports Services. What must I download? The installation guide says that "Oracle Application Server 10g (9.0.4) Forms and Reports Services allows you to install and configure Forms and Reports Services without the need to install and configure all of Oracle Application Server 10g (9.0.4)" but it does not clearly state what exactly to download.
    Oracle Application Server 10g Release 2 (10.1.2.0.2)
    [http://www.oracle.com/technology/software/products/ias/htdocs/101202.html]
    or
    Oracle Developer Suite 10g (10.1.2.0.2)
    [http://www.oracle.com/technology/software/products/ids/htdocs/101202winsoft.html]
    Faoilean.

    You might find better assistance in the APplication Server forum - Oracle Application Server - General

  • Oracle Application Server 10g Disaster Recovery

    Hi all,
    This is regarding Disaster Recovery approach for Oracle Application Server 10g. There are two environments Active (DC-PROD) and Stand-By (DR-PROD). Each environment have 2 nodes where OAS Instances are installed in both nodes and each environment has a Virtual Hostname (Virtual IP) used. The 2 nodes hostnames of DC-PROD environment differs from 2 nodes of the other environment DR-PROD.
    However the Virtual Hostname is same between two environments.
    The env DC-PROD is setup already and is working fine. Now we have to setup DR-PROD env for disaster Recovery purpose. DR-PROD is also setup independently from DC-PROD. Each env has seperate DB servers in RAC mode. We are using EMC SRDF replication technology to do DB replication between DC-PROD and DR-PROD environments.
    There is no disk replication between Oracle Application Servers of two environments DC-PROD and DR-PROD. DC-PROD is NOT setup using Oracle AS Guard for some reasons and we are in a situation that DC-PROD should not be touched at all.
    So if the Database is replicated from DC-PROD to DR-PROD servers using EMC SRDF replication technology, while bring up OAS Infra services in DR-PROD node, OC4J is failing to come up. After some workarounds, OC4J cameup but we are unable to login to OIDDAS console.
    ssoServer.log shows the following: -
    Mon May 30 11:01:23 IST 2011 [DEBUG] AJPRequestHandler-ApplicationServerThread-8 DatabaseConfigReadergetting partner apps configs: select site_id, site_token, site_name, home_url, success_url, logout_url, encryption_key, encryption_mask_pre, encryption_mask_post, start_date, end_date, administrator_id, administrator_info from wwsso_papp_configuration_inf_t where site_id = '06B9F06C'
    Mon May 30 11:01:23 IST 2011 [DEBUG] AJPRequestHandler-ApplicationServerThread-8 Partner Site ID: 06B9F06C
    Mon May 30 11:01:23 IST 2011 [DEBUG] AJPRequestHandler-ApplicationServerThread-8 exception before getAuthLevel
    oracle.security.sso.server.conf.ConfigurationException: Partner application configuration not found:06B9F06C
    at oracle.security.sso.server.conf.DatabaseConfigReader.getPartnerConfiguration(DatabaseConfigReader.java:143)
    Please provide us the inputs to achieve Disaster Recovery for OAS 10g without using Oracle AS Guard.
    This is very urgent and your inputs are greatly appreciated.
    Regards,
    Mahendra.

    Another point to add for the environment details. Both DC-PROD and DR-PROD environments does not have connectivity at all. Only the DB connectivity is there for doing DB replication.
    EMC SRDF replication technology is a block by block replication i.e., a disk replication. Hope these details are sufficient for environment specifications.

  • How to convert HTTP to HTTPS in Oracle Application Server 10g(10.1.3)

    Can you please suggest notes to convert HTTP to HTTPS in Oracle Application Server 10g(10.1.3) as we need this to integrate the custom apps with EBS(12.1.3)?
    Appreciate your quick response,
    RM

    For Oracle EBS R12, the docs provided above should be helpful. If you want to configure the application server with SSL (assuming you have 10gAS installed), please refer to Oracle AS10g documentation -- Secure Sockets Layer (SSL)
    Oracle Application Server 10g Release 3 Documentation
    http://www.oracle.com/technetwork/middleware/ias/documentation/index.html
    Secure Sockets Layer (SSL)
    http://download.oracle.com/docs/cd/B25221_04/core.1013/b25209/part4.htm#BEHBDFGD
    Thanks,
    Hussein

Maybe you are looking for

  • How do I Copy and Paste a sentence using an iPad 2 with the iOS5?

    When I am in Safari and I want to copy a selected quote from a webpage how can I do it?     I have seen you tube videos showing how to this but with the new iOS 5 It won't work for me.

  • Opening multiple RAW files in Adobe Camera RAW

    Former CS6 user. Now trying CC but can't find a way to select an open only the RAW files in ACR, in a folder that has both RAW and jpeg files. There are options for select certain types of files but RAW is not an option like it was in CS6. I need to

  • Having problems with restoring my iphone 4 to iphone 4s

    Hi everyone, I have been having a nightmare with backup and restoring my from my iphone 4 to iphone 4s since Friday night. Naturally, I got home with my new Iphone 4s and wanted to get it up and running with my current contacts, sms and notes (and ap

  • Strange POF behaviour in 3.6.1.3

    Hi All, We have been seeing some strange POF behaviour in 3.6.1.3 paricularly around classes with boolean fields. Here is my test case: package org.gridman.pof; import com.rbs.odc.dashboard.server.cluster.model.Case; import com.tangosol.io.pof.Config

  • TS3694 error code 17

    I was able to get a Ipad Air, and after update it been in reset mode with error code 17?? any help