Oracle NACHA payment format - CR/LF after 94 characters?

Trying to update the standard Oracle Payables APXNACHA.rdf to throw a CR/LF after each 94 characters, but as far as I can see from the layout, it should be doing that anyway.
Somehow, the developer has managed to get the fields from the various repeating frames to print beside each other so the eventual output is all on one line.
Any ideas on how this was done, and what I should do to break it into 94 character chunks again?
TIA,
Rob

Danny,
Thanks for this - I've figured out what they did. The report produces standard layout, with carriage returns and line feeds. Proved that by running it in the previewer.
What they then did was define a new prt file with no carriage return/line feed characters defined, effectively stripping these from the report output.
I've created a prt with these in and it works fine.
Regards,
Rob

Similar Messages

NACHA payment format

Has anyone customized the NACHA Payment program in 11.5.10.2? Our bank requires carriage returns after each record type rather than one long record which is why we have to do this? Can it be done with BI Publisher or do we have to modify the Oracle report? I tried changing the output of the NACHA payment program to XML and it errored.

Danny,
Thanks for this - I've figured out what they did. The report produces standard layout, with carriage returns and line feeds. Proved that by running it in the previewer.
What they then did was define a new prt file with no carriage return/line feed characters defined, effectively stripping these from the report output.
I've created a prt with these in and it works fine.
Regards,
Rob

Is it possible to maintain multiple payment formats with a single Program

Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Payment Format R12 -- IBY_FD_EXTRACT_EXT_PUB

Hi Gurus,
I've one requirement in R12, need to define custom Payment formats in instance. In our prior instance 11.5.7, we are generating custom payment format through concurrent program defined and attached to the Payment formats in payabales, and this one is being used in the Payments creation in 11.5.7 (which we knows very well). In the standard program 'Format' we are generating one text file through custom coding.
Now we need to design similar functionality in R12, as per the Oracle we need to customize IBY_FD_EXTRACT_EXT_PUB.Get_Pmt_Ext_Agg i am using for placing the custom code in that package as suggested in the metalink. The template document also needs to redefined for our purpose, we will not be using the output file. In place of that we need to generate text which we are producing like in the older versions. This text file we will upload to the banks. Our client don't want to change the process needs to adhere to the same old concept.
My requirement is that , is there a way where we can remove template functionality and only generate text output through IBY_FD_EXTRACT_EXT_PUB.Get_Pmt_Ext_Agg package. Or do I still need to use the template and manage it. Please suggest is that packaged function which I am referring suits for requirement or not.
Thanks in advance for your valuable suggestions.
regards,
Nagendra

Hi vinit,
Thanks for your inputs. Actually I am bit confused with the rtf files how to modify them. As my requirement is to shown the same kind of output what we are generating in the 11.5.7, means in the text output format. For generating this we are using the query in the old instance and when ever any payment is created in the format request we will be getting the output, where it was used to send it to the bank.
Now in R12 I want to use the same thing, for that what approach will be better, since what r12 structure conveys is that we need to use the template which they have provided. My question is whether is it mandatory for me to use the package IBY_FD_EXTRACT_PUB and template for this. As I found of lot things in the google regarding, where it suggests to customize the package and update the template. But how can I sync custom code with package and again with package to the template. I found all these things but not exactly getting how to put them in manner.
Can you please explain me in detail steps.
Regards,
Nagendra

R12 Nacha Payment (ACH)- Missing Supplier Bank Info in the file

Hi All
Env: R12.1.1.
Implemented Nacha payment in AP
Payment Instruction Format: US NACHA CCD Format
The file was generated but supplier's bank routing number and account number were missing in the file.
I must have missed some steps setting up external bank for suppliers.
The routing number was generated as 000000000 and bank account number as null.
Any thoughts or comments?
Thanks,
Joon

I had the same issue..
Try this it worked for me..
Go to the Supplier setup --> query for a supplier -->Go to Payment Details --> Payment Method and Set Electronic as default.
Create an invoice to the supplier... with immediate payment --> make a payment (Make sure payment method is EFT and uses US Naacha Payment process profile)

XML Payment Format (APXMLPMT) Obsolete in R12

Hi all,
We are using the XML Payment Format APXMLPMT in R11. In the "Functional Upgrade Guide: Release 11i to Release 12" is stated to be obsolate, but with
no clear indication on what to use for R12.
What are our options?
Thanks,
Knut

Knut,
Review the following note:
Note: 435151.1 - Is the Format Payments (Evergreen) APXPBFEG.rdf Obsolete in Release 12?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=435151.1
Regards,
Hussein

DME Payment Formats

Hi, I am working on a DME issue. Here the Funct Consultant has created a new payment format in which it ll pick the IBAN number in place of Bank A/C number of vendor for Automatic Payment transaction (F110) of Open Orders. The requirement is while doing the payments if the IBAN is blank then it should pick the bank ac number for that vendor.i might need to add a Function Module for this one but I ve debugged the program but not getting from where its getting the value for IBAN. Could you please give me some suggestion in order to solve this.
Thanks.

Hello Sam
When configuring the payment methods for the country (transaction OBVCU), choose the payment medium program as RFFOM100.
From se38, pls read the documentation for the program, which will give you the various options & the required config too.
You would also need to configure the instructions keys as required.
To generate the DME file, you have to run the automatic payment program with this payment method.
After the payments have been successfully posted, you can go to DME administration and with the help of dme manager download files on your PC.
SAP has determined that the standard print programs for automatic payments will no longer be supported, and will be replaced by transfer structures created by a tool called the DME Engine.
This tool enables the business to create DME output files without ABAP development, and can be attached to a print program and form for the creation of Payment Advices.
Outside of the DME Engine (DMEE), the majority of the configuration takes place within the following IMG menu path:
IMG Path: Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Media -> Make Settings for Payment Media Formats from Payment Medium Workbench
Config
Assign Selection Variants
IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Media -> Make Settings for Payment Medium Formats from Payment Medium Workbench -> Create / Assign Selection Variants or transaction
OBPM4..select your format that you are using
Check in FBZP config that all is linked!
Although this is bitty but you need to work through it!
Start with FBZP, create all there than go to DMEE either to create your own format or use the standard ones.. than go to the menu path above and work through from create to assign...

Ap payment format

I have to pay from new bank.
I created new rdf with the file to upload connected it t executable and program .
The problem I can not create new payment format because the lov of format payment doesn't include my program.

You need to define new payment program in AP.
Navigation Setup->Payment->Programs
HTH
DineshS

Need to enter invoice and payment in the system after a manual check issued

Client Need to enter invoice and payment in the system after a manual check is issued for some urgent transactions.
Please suggest few ways to do this .

Hi,
If client can maintain a separate check book sequence for manual issue, we can configure a separate payment document with the same sequence and later record the invoice and generate payment ....
Regards,
Ivruksha

Payment Format Program Output in XML

Hi All,
I am trying to create a new payment format and should display the output in XML.
For this I created a PL/SQL procedure , created my tags and displayed the out put in XML format. Using this I created one RTF template and did the data def and data Template.
I defined the payment format, programs and a document.
When I run the payment batch using this format , It says no output is generated.
But the xml output is generated, the template is not shown as attached.
If I run the concurrent program alone of the payment format I can see the template attched and the output generated in XML.
BUt when I run the same through a payment batch selecting the document from which the program format is run it does not seem to take the template and hence no output even though there is XML.
Can someone throw some light.
Thanks.

Hi,
I got it...Now I am able to generated the output in PDF.
It is a 2 step process, I had to submit XML Report Publisher Program once the format program is run so that it picks the tempalte and generates the output.
So, Now is there a way to skip this 2 step process ?
coz finally I have to print the out of the format to a printer.
Thanks
Edited by: user576422 on Oct 21, 2008 2:22 PM

Payment format for Hungary

Hi,
does anyone know if there is a payment format tree available for payment file format KOZOS (Pan European Payments) at the Deutsche Bank in Hungary?
I know I can build it in DMEE, but I would prefer not to. (Don't have time.) If there is a structure I can copy, it would help.
Thanks!
Moly

Hi Moly,
Thanks for your quick reply and nice to acknowledge that you had built the new file structure by yourself. Is it therefore possible to send me a copy that file structure; or provide me the basic settings of the .xml file?
Thanks in advance.
Best regards,
Arjanto

Payment format - payment advise

Hello,
I have the following problem: we have a company code in CZ. The payment run creates payment advises for every payment. Now we have the requirement that an advise should be printed out only from e.g. 4 items on. In the customizing I changed the note to payee and also developed a function module to reference to the table t042e. But nothing solves the problem. The payment advises are printed for every payment item. I think that this is "hard" coded in the payment format? but how can I find this code? And is it possible to change it?
Thanks for your answers

Hi Alexander,
I think this can be solved using customization. Go to Finatial Accounting> Accounts Receivable and Accounts payable> Business Transactions --> Outgoing Payments --_ Automatic Outgoing Payments > Maintenance of company code dat for a payment Method - In this point you should look for the section "Payment advice note upward of-lines"
Here do the apropriate modifications
Best Regards
João Fernandes

Payment format DMEE

Hello,
I am creating payment method in country using transaction FBZP.
in the payment medium format, I wanted to use MT101.
But I noticed that this format is not displayed in transaction DMEE with tree type PAYM even if it is shown in the match code in transaction FBZP ( in the payment format medium).
Why is this situation ? what Should I do to see it in DMEE ?
Thanks

SAP has provided some of the DME structures for different countries. like GB_BACS for GB etc.
If your client is not part of those structure, probably you are required to create your own structure. It also depends on the bank of your client. They may want the file in a different format. Therefore, you need to first talk to the bank and get a sample file in which they need the format.
You can create the DME structure by using transaction code DMEE - Tree Type is PAYM.
You can create the DME structure as a flat file or XML file based on the requirement of your client (bank).
You can also copy the standard structure to Z structure and modify it according to your requirements.
Please also make sure that you have made settings in OBPM1, OBPM2, OBPM3 and OBPM4 (More importantly you should maintain the path where it needs to be downloaded)
Complete your FBZP settings - Importantly payment methods in country, select your DME structure.
Take help of basis consultant in order to create the directories. You can see the directories in AL11.
If there are no directory path maintained in OBPM4, then the file gets saved to temporary directory in AL11.
If you are using DME structure, then forget the classic payment medium.
1. First ask the bank for the format, file type etc. Ask bank for any document available.
2. The see for that country if SAP has provided any standard DME structure (Transaction Code DMEE - Tree Type PAYM)
3. If this is not sufficient, then copy the standard DME strcutre and modify it accordingly to your requirement.
4. Assign this DME structure in FBZP - Payment Methods in country. * Use payment medium workbench
5. Check with your basis whether any secured folders are created in AL11 (where the output file needs to get generated) - If not ask them to create.
6.Check your settings in OBPM1 / OBPM2 / OBPM3 / OBPM4 - (In OBPM4 make sure you have given the secured folder path and file name for your variant)
7. Run F110 - Check you have maintained your variant details properly for program RFFOAVIS_FPAYM
If you maintain all these steps correct, hope your DME file should get generated.
Regards,
Ravi

How to create payment term '90 days after Bill of lading + 7 days after...'

Hi all,
I was wondering how you can create this special payment term:
"90 days after Bill of Lading, the calculation of the Net Due Date has to start 7 days after the invoice date".
90 days after Bill of Lading is no problem to create.
The start of the Net Due Date 7 days after the invoice date is a more tricky one.
The transaction code for Payment terms is OBB8.
In the Display View: "Terms of Payment": Details, you can find that the document date is the baseline date (and the start date).
Do someone know how you can change the document date into invoice date ? And if so, how can you add 7 days after the invoice date?
Thanks.
Kind regards,
Pamela

Hi,
thanks for your reply and possible solution.
Unfortunately, i can't change the payment terms to my requirement.
The problem is that I need a variable date (starting from the invoice date, which we don't know yet),
and SAP only allows a fixed date.
If you know how to proceed, let me know.
Thanks in advance,
Regards,
Pam

RE: Oracle DATE data format conversion..

<C.M> Motta's question about dates and oracle>
Dealing with dates and Oracle is somewhat of a nuisance. Oracle is very
particular about how date strings are formatted, and if you get it wrong,
you get the (unhelpful) message that C.M. Motta showed us. However, if
you pass a DateTimeData to Oracle, Forte' does the right formatting for you.
If you do need to format the date prior to interacting with Oracle, use the
following format:
dd-mmm-yy <time component>
You can change the default format, but it is not easy.
If you customise Express generated code that interacts with an Oracle
database, again, make sure that you pass a DateTimeData, and not the
.TextValue.
Good luck!
Richard Kirk

Date: Wed, 06 Nov 1996 08:18:37 -0500
To: "C. M. Motta" <[email protected]>
From: Jim Milbery <[email protected]>
Subject: Re: Oracle DATE data format conversion..
Cc: [email protected]
Cheers:
Most likely what is happening is that you are using the default date
format of Oracle, and you are sending a four-character year. As follows:
SQL> insert into jimbo values ('01-dec-1997')
2 /
insert into jimbo values ('01-dec-1997')
ERROR at line 1:
ORA-01830: date format picture ends before converting entire inputstring
>
Oracle defaults to a format of 'dd-MON-yy'
You can either truncate the year, or manipulate the date to match the standard
database as follows:
insert into jimbo values (to_Date('01-jan-1997', 'DD-MON-YYYY'))
\jimbo
At 09:21 AM 11/6/96 -0200, you wrote:
Forte Users,
First, Id like to thank all those who answered my question on
droplist & SQL. I got just what I was looking for: its up and runnunig
now.
I have another question: Im trying to insert a DATE into an Oracle
database. The source date is:
data : DateTimeData = new;
data.SetCurrent();
So, when I try to insert data.Value or data.textvalue into DB, I
get the following exception:
ORA-01830: date format picture ends before converting entire
input string.
Are there any suggestions?
Thanks for your help,
C.M. Motta
====================================================================
Jim Milbery
Milbery Consulting Group
132 N. West St., Allentown, PA 18102
O: 610 - 432 - 5350 F: 610 - 432 - 5380
E-Mail : [email protected]
====================================================================

Oracle NACHA payment format - CR/LF after 94 characters?

Similar Messages

Maybe you are looking for