Oracle Portal Server prompts for password

Thanks for looking into the problem:
I have entered UID and Password in the DAD files of both Portal and Login Server. But when i try to login my application portal it prompt me to enter the passord again. I want to login into the my Portal Server without entering any password as they are already present in my DAD files.

Hi,
Basically, the UID and password you entered in DADs config files, are UID and password for database schemas ( one for portal schema and other for SSO schema). But when you access portal server, it asks you credentials which are stored for each lightweight user. This user / password is stored in Login Server (SSO).
Hope it clarifies your problem.
Regards,
Ved

Similar Messages

  • Why does Outlook keep prompting for password

    We have seen our community members ask questions about Outlook keeps prompting for credentials many times. This issue could be caused by numerous reasons. Below is a list of the most common reasons for this problem:
    Outlook is configured to prompt you for credentials
    Incorrect password cached in credential storage
    Required Authentication Settings for outgoing server and incoming server
    Outlook Anywhere is not configured to use NTLM Authentication
    Corrupt Outlook profile
    Slow or unstable network connection
    Antivirus programs
    Shared calendars
    Outlook is configured to prompt you for credentials
    If you are using an Exchange account, there is a setting in your Outlook profile to always prompt for logon credentials. To find the setting, please follow:
    1. In Outlook 213, go to File tab > Info >
    Account Settings > Account Settings…
    2. Highlight your Exchange account and click Change button.
    3. Click on More Settings button.
    4. Select the Security tab.
    5. Under the User Identification, make sure the “Always prompt for logon credentials” option is not selected.
    If you are using other types of email, please make sure you have ticked the option “Remember password”.
    Incorrect credential cached in Credential Manager
    Your Windows system stores user credentials on your computer. If the cached credentials are incorrect, you will be prompted for password. This issue usually happens after the password for your domain user account is changed. Before your password changed,
    you saved your credentials. The stored credentials are not overwritten when Outlook triggers the authentication prompt even if you enable the Remember my credentials option.
    To fix this issue, you need to remove the corrupted credentials, follow these steps:
    Click Start,      click Control Panel, and then click Credential Manager.
     Note If View by is set to Category, click User Accounts first, and then click Credential Manager.
    Locate  the set of credentials that has Outlook in the name.
    Click the name to expand the set of credentials, and then click Remove from Vault.
    Repeat step 3 for any additional sets of credentials that have the word Outlook in the name.
    Required Authentication Settings for outgoing server and incoming server
    Different email provider may need different authentication settings. Please make sure you have set the server settings correctly. You can contact your email provider to gather the information.
    In general, we select the “My outgoing server (SMTP) requires authentication” option and the first bullet “Use same settings as my incoming mail server”.
    In addition, click on the Advanced tab and check if you have enter the correct Server Port Number and select the correct encrypt type. Below is a screenshot for an IMAP account:
    Outlook Anywhere is not configured to use NTLM Authentication
    The Outlook Anywhere feature allows you to access your Exchange account remotely from the Internet when you are working outside your organization's firewall.
    When using Outlook Anywhere to connect to your Exchange server, we need to choose
    the authentication method among Basic Authentication, NTLM Authentication and Negotiate Authentication. The difference among them is the way that the passwords are sent when connecting to the server. With Basic Authentication,
    the password is sent in clear text. Using NTLM Authenticationcan significantly reduce the number of password prompts.
    To check the authentication setting, please go to File > Account Settings > Account Settings,
    select the Exchange account, and then click
    Change. In the Change Account wizard, click
    More Settings, and then click the Connection tab. Click the Exchange Proxy Settings button and now, you can see the settings under
    Proxy authentication settings. Try to change the authentication to
    NTLM Authentication and then check the issue again.
    Slow or unstable network connection
    If your network connection is slow or unstable, Outlook may lose connection to the mail server. When Outlook try to reconnect, it will prompt for the credentials. To verify this, please switch to a stable network environment and then check if this issue
    persists.
    Corrupt Outlook Profile
    Corrupt profile may cause Outlook to no longer remember your password. Please try to create a new mail profile in Control Panel and reconfigure your email account in the new profile to fix the issue. To create a new mail profile, you can refer:
    http://support.microsoft.com/kb/829918
    Antivirus software
    Antivirus software usually integrates into your Outlook and it may cause some conflicts. Try to temporarily turn off your antivirus software to check if the issue will be gone.
    Shared Calendar
    Shared calendars can impact the user credentials, this issue may also occur if you have shared calendars opened in Outlook. You can try to unselect the shared calendar to check the result. It’s recommended to not open the shared calendar unless you want
    to view them.
    If you have any comments, welcome to post in the forum. Thank you.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Nope...
    I went through point by point by point, top to bottom, checking and verifying every single item as a possible cause for why my system (Outlook 2013 running on Windows 8.1 and connecting to Exchange 2010) insists on prompting me for my password every single
    time I start Outlook.  None of the solutions worked, my system still prompts me.  I don't even have to supply a password.  When the prompt dialog appears, I just cancel it.  Within a few seconds, the bottom Outlook status bar changes to
    "Need Password" with a key icon to the left.  Then I just click on that message and immediately Outlook connects to Exchange.
    The freaking software is BROKEN!  Period.

  • XFA Pdf form call secure webservice without prompt for password

    Hi,
    We are using XFA forms within the company. We have created many (400+) interactive forms with fields to fill manually.
    Now the business would like to lookup account details. They want user to be able to enter account number and then lookup details through webservice.
    The webservice is created on HOST/CICS and in COBOL. We need security on HTTPS and we cannot accept that the user is prompted for password.
    Our security department state that normal practice is to use KERBEROS token that gets authenticated later - is that possible with Adobe Reader??
    Have anyone developed this functionality within XFA forms and Adobe Reader?
    Thanks in advance,
    Thomas Groenbaek

    Reader can make Web Service calls but the form must be Reader Extended by LiveCycle Server to allow this. It does support secure web service calls but it does uid/pwsd or certificate authentication. Note that the web service can only return simple types. Objects cannot be returned.
    Paul

  • Outlook 2010 prompting for password

    Hi everybody. I ran into an issue yesterday morning where at one of our sites Outlook 2010 has started prompting for a username and password. If the user types in their username as "MYDOMAIN\myuser" and their password, it lets them in but the Exchange
    status shows as "Disconnected". If the user sets their username to just "myuser" without the domain on the front it lets them in and works as expected until they close Outlook, at which point they have to enter their credentials again. 
    The strangest thing about this is that it's only affecting one of our sites and only Outlook 2010. Users running 2007 and 2003 do not have the problem and only users at this physical location have the problem. Does anybody know where I can look? I have tried
    clearing stored credentials, created new Outlook profiles and reset passwords. None of these things seem to have had any effect. 

    After changing a ton of outlook settings, deleting the user's account profile on outlook, deleting their domain profile from the effected computer, trying to fix the registry, deleting stored credentials, etc.... almost everything else I found something
    that FINALLY worked for me after over a year and about 12 different users being effected. 
    in the past I would just give up after much frustration and upgrade them to Office 2013 but that gets very expensive especially when I have 57 other users that could potentially run into the same issue. 
    Here is what I did. 
    - back up the user's data. log out and log into local admin
    - delete the user from the local registry
    - repair Office 2010 through control panel/programs, restart
    - have user log back in with their credentials to make new local profile. recover their backed up documents. log out and log back in as local admin. 
    - install hotfix KB2597011
    - restart computer
    - install hotfix KB2583935
    -restart computer
    - log in, open outlook and setup user's account. 
    Some of these steps may be skipped as I didn't find the hot-fixes until after I repaired office, however I am just providing what I did in the process to end up with a working outlook again. 
    Some things unique to my situation that may or may not help. 
    - I noticed some of the computers have Office2010 32bit installed on 64 bit machines. 
    - Some of the users were swapped over using a profile mover program when we moved to a domain environment. 
    - For me this always happens when the user's passwords expire and they have to log in to the portal to change it. Then outlook starts with the repeated prompt for passwords. It is always computer specific and nothing but what I provided above has worked
    other than re installing windows 7 and then office or upgrading to office 2013. 

  • Prompting for password and username only when using dynamic parameters

    Post Author: Co3023
    CA Forum: Crystal Reports
    How do I stop CR XI prompting for password and username only when using dynamic parameters. When no dynamic parameters are used CR XI isn't prompting for the DB user name and password. The report is run from an application which passes the user name and password. I am using Oracle and the problem is both with the native oracle driver and the ODBC RDO driver.

    Post Author: jehanzeb
    CA Forum: Crystal Reports
    I didnt ask you to change it to static I said I took the parameters totally out of the report. Saved it. Then re-enter the dynamic parameters into the report and it worked for me. That might have worked for you, not sure why you changed it to static.
    Ok I have just created a quick report using dynamic parameters, it didnt ask me for the username password.
    Can you create a sample report - just to test the db? and see if it works? add only 1 or 2 fields in the report, create parameters (dynamic) and see if it works
    why don't you embed the username and password in your application, it won't ask for username password then.

  • Prompting for passwords even i configured ssh password less authentication

    There are two servers :
    1. Site
    2. Testing
    from site server i want to connect testing server with ssh password less authentication.
    i generated public and private keys with ssh-keygen -t rsa on site server.
    cat id_rsa >> authorized_keys
    cat id_rsa.pub >> authorized_keys
    i appended id_rsa.pub ( public key site server ) to authorized_keys ( testing server ) with below command .
    ssh [email protected] "cat >> ~/.ssh/authorized_keys" < ~/.ssh/id_rsa.pub
    am i missing some point in performing procedure for ssh password less authentication ?
    because it prompts for passwords agaian and again
    Edited by: user13376823 on Oct 9, 2012 9:30 AM

    user13376823 wrote:
    There are two servers :
    1. Site
    2. Testing
    from site server i want to connect testing server with ssh password less authentication.
    i generated public and private keys with ssh-keygen -t rsa on site server.
    cat id_rsa >> authorized_keys
    cat id_rsa.pub >> authorized_keysI don't think you should be doing this. I can't see the point of adding the private key and adding the public key means the "Site" can ssh to itself without needing a password!
    >
    i appended id_rsa.pub ( public key site server ) to authorized_keys ( testing server ) with below command .
    ssh [email protected] "cat >> ~/.ssh/authorized_keys" < ~/.ssh/id_rsa.pub
    I would expect you to add the RSA public key to the "authorized_keys2" file and not the "authorized_keys" file.
    >
    >
    am i missing some point in performing procedure for ssh password less authentication ?
    because it prompts for passwords agaian and again
    Edited by: user13376823 on Oct 9, 2012 9:30 AM

  • Seamless Integration Between Weblogic and Oracle Portal Server

    Hi,
    Can someone please give me some insight into Seamless integration from Weblogic Portal Server to Oracle Portal Server.
    The Scenario is as:
    A user logs into the Weblogic Portal, this Portal desktop displays some portlets. Links on these portlets navigate the user to the portlets deployed on Oracle Portal.
    Is this feasible, and what version of the 2 servers would support this feature.
    Can someone please snd across online resources which deal with my doubt.
    many Tx.
    Regards,
    Mukta

    You might want to consider using WSRP to aggregate portlets deployed on
    Oracle into WLP. Check edocs and dev2dev for some info on WSRP in WLP.
    You can use 8.1 SP3 or later.
    Check with Oracle to find out which version of their product offers WSRP
    support.
    Subbu
    Mukta Shetye wrote:
    Hi,
    Can someone please give me some insight into Seamless integration from Weblogic Portal Server to Oracle Portal Server.
    The Scenario is as:
    A user logs into the Weblogic Portal, this Portal desktop displays some portlets. Links on these portlets navigate the user to the portlets deployed on Oracle Portal.
    Is this feasible, and what version of the 2 servers would support this feature.
    Can someone please snd across online resources which deal with my doubt.
    many Tx.
    Regards,
    Mukta

  • RDP prompting for password

    I am trying to setup an rdp connection that will connect to a windows
    2003 domain server without being prompted for credentials. The server however is constantly prompting me for a password.
     So far have checked the following
     1) Group Policy in "Administrative Templates\Windows Components\Terminal
    Services\Encryption and Security\Always prompt client for password upon connection" is not configured.
     2) The registry key "fPromptForPassword" in both DefaultUserConfiguration
    and WinStations is set to 0.
     3) Credentials are stored in the local credentials cache
     I presume the problem is that on the RDP-TCP properties of
    the server I am trying to connect to, "Always prompt for password" is ticked
    and is also greyed out so I am unable to change it.
     Can anyone tell me how this box is ticked and greyed out given the
    above settings and if this will be the cause of my issue.
    Thanks

    Hi,
    It sounds like the setting is configured via group policy.  Please log on to the server as a domain admin and use gpresult to check the group policy settings that are being applied using the following commands:
    gpresult /z>gpresult.txt
    notepad gpresult.txt
    Thanks.
    -TP

  • Outlook 2007 Clients Prompt For Password When Opening

    I am running Exchange 2007 Standard.  New outlook 07 clients prompt for password each time it is opened.  Older clients do not prompt for password.  Is there any way for outlook 07 to not prompt for password?  Users already logged into domain, should their credentials not be recognized automatically like with outlook 03?

    This fixed it for me.
    http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/383d130e-869f-4fce-9502-8b340904b0ba/#636c5a5e-c61f-414b-8e85-562c888b83cc
    Quote:
    Same problem here after restarting SBS 2008 for upgrades (annoying login box popping up after starting Outlook and also other times). 
    This solved the problem for me:
    IIS Mgr on SBS 2008 / - / SBS Web Applications /
    - SSL Settings / Client certificates - Stop / Start web server after changing settings: 
    Autodiscover: Ignore 
    EWS: Ignore 
    OAB: Accept *) 
    owa: Accept *) 
    Rpc: Accept *) 
    RpcWithCert: Accept *) 
    *) All these have to be Accept to get rid of login box 
    Best regards 
    Bjorn
    I was having the same issue. SBS2008, Exchange 2007. Only being prompted in Outlook 2007 clients. Tried a lot of different things to fix it, but none worked. This started happening after a round of security updates but I could not find KB2412171 on the list.

  • BEFW11S4 - Constantly prompts for password submission and always fails

    I decided to do a full reset (45s button on back).  I promptly reset the admin password on first login.  All subsequent "APPY" actions in the admin console forces me to a popup login screen where I have to enter password.  This always fails and eventually I'm redirected to a 401 page (see below).   For example if I want to disable wireless or set a WEP key on the main page a popup appears for password but it always results in a 401.  I've tried clearing all browser information and attempted this on both IE 7 and Firefox 2.0.0.9 with similar results.
    1. I don't remember always getting prompted for password before; after initial login.
    2. Popup submission of password on subsequent authorizations always results in a 401.
    Thanks in advance!
    " 401 Authorization RequiredThis server could not verify that you are authorized to access. Either you supplied the wrong credentials(e.g., bad password), or your browser doesn't understand how to supply the credentials required."

    I managed to fix this...
    I found another support thread that indicated "disabling" Norton Internet Security prior to accessing the Linksys console.  It appears NIS was filtering or preventing the username/password being sent in the clear.
    How I did it...
    1. Right click the NIS icon in the desktop tray.
    2. Select "disable" NIS from the menu and enter a time from the drop-down (i.e. 5 minutes).
    3. Return to IE.  Clear all cached data (just in case).
    4. Proceed to login to Linksys!
    Cheers
    James

  • I cannot download an app from the app store, it keeps loading until it says "You have already purchased this app so it will be downloaded no at  no additional charge", and then it prompt for password and I input it after which nothing happens.

    I cannot download an app from the app store, it keeps loading until it says "You have already purchased this app so it will be downloaded no at  no additional charge", and then it prompt for password and I input it after which nothing happens.
    I know my icloud has record of my installing this app before, but that was the first install that was failed during that time some other apps also keeps loading without respond whey they updated itself, and this app didn't install before I restart the device. But I don't see this app on my device after I restarted the device so it should have been installed on my device. It seems icloud has created some kind of dead loop that makes it not able to get the correct status about this app on my device.
    I have no problem install this app on my other device (iPad) with the same account, but just fail on my iPhone. And it just fine installing other apps...... What happened !!?? @@
    Please help !!! 

    Someone help! I dont know how to do this and please put the words into an easy way to understand because im young...

  • Where can I get Oracle database server 9i for windows 2003

    Hi,
    I need Oracle Database Server 9i for Windows 2003. From Oracle online download, there is one a patch set available. Where can I get the full version?
    Thanks
    Laura

    Hi, I found the solution. There is no software to direcly install Oracle 9i on Windows 2003. I need to install the software for NT/2000 first, the patch it.
    That's why there is only patchset for 2003 for downloading. See the doc below:
    three installation components required to install
    Oracle9i Database release 2 (9.2.0.3.0) on Windows Server 2003. These three
    installation components must be installed in the order listed. If you are
    migrating a pre-existing Oracle9i database to Windows Server 2003, first
    upgrade the database to the Oracle9i Database release 2 (9.2.0.3.0) patch set
    before upgrading the operating system.
    Obtain the following installation components:
    Oracle9i Database Release 2 (9.2.0.1.0) for Windows
    Oracle Universal Installer release 2.2.0.18.0 for Windows
    Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows

  • Office 365 Outlook prompts for password whenever outlook is restarted.

    Hello Folks,
    We have recently deployed Office 365 (We had Kerio email system previously, But we did not do a migration).
    The problem is 
    Office 365 Outlook prompts for password whenever outlook is restarted
    Tried the following workarounds, 
    1) Logon network security under More
    Settings on the Microsoft Exchange Security tab
    is set to a value other than Anonymous Authentication
    2) Tried removing the Generic Credentials from Credential manager.
    The is issue is only for some users (Majority). 
    (OS Platform: Windows 7/Windows 8).
    Thanks in Advance
    Murugupandian Pandi

    The first thing I would recommend to do is to make sure that your install missing Outlook updates and try again.
    I would also recommend asking them in this forum: https://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • File upload functionality in oracle portal server

    I have got a struts portlet on oracle portal server 9.0.4.My functionality is to have a file upload facility. I tried to achieve it , but problem arises when i use any pdk taglibs like
    <pdk-html:link page="/ShowInitialSupportScreen.do?action=initial&levelOfAction=3">
    after uploading when i forward to a result.jsp. and in that file if i use a tag like above, it gives null pointer exception because
    httpservletrequest.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST)
    this returns null when my enctype is multipart/form-data. in the fileupload.jsp
    and the in the internal implementation of the pdk taglib it refers to the PortletRenderRequest from httprequest object.
    The following link says multipart is not supported by the Parallel Page Engine.
    Re: multipart/form-data jsp
    Do you have any idea on this issue. File upload seems to be a basic functionality but doesnt the Oracle portal Server support it?
    With kind regards,
    -Rafeeq

    I got the solution, we cannot achive file upload in portal server cos it does not support Multi-part Data . instead i achieved it by a separate struts application to upload and invoked it from my portal application in an popup window.

  • Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit

    Hi
    Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit machine.
    Please provide the dowload links.
    Thanks

    Please follow this link for download and set requirements for installation of WebLogic 10.3 for Win 2008 Server 64bits:
    http://download.oracle.com/docs/cd/E13196_01/platform/suppconfigs/configs/windows2008/win2008_103.html
    best regards,
    Thiago Leôncio

Maybe you are looking for