Oracle Portal (WebDB 3.0) for linux out yet?

Does anyone know when Oracle Portal for Linux will be available for download ?

Similar Messages

How can Oracle Portal 11g improve ROI for a utility company

I want to prepare a presentation regarding Oracle Portal 11g for a group of senior management in my company which sells electricity for commercial building. So i need to know from where i can find related papers that gives some practical examples for how implementing an Oracle Portal 11g can reduce operational costs and can improve ROI over time. So that if the company buy Oracle Portal 11g which costs for example X dollars then the company can cover this cost from reducing the operational costs in few years.
Appreciate a lot any help and support.
Best Regards
John.

The supported way to install Oracle Portal is available in Note [url https://support.oracle.com/epmos/faces/DocContentDisplay?id=1436807.1]1436807.1, 'How to Perform a New Installation of Oracle Portal 11g With Oracle Access Management 11g as Single Sign-On Solution ?'.
A few remarks about this note :
<li>The note mentions FMW 11.1.1.6 - FMW 11.1.1.7 is out already and should be used instead
<li> The note mentions OAM 11.1.1.5 - use OAM 11.1.2 instead as it will allow you to consume a future patch for DAS support
Thanks,
EJ

Where can I download Oracle 8.1.6 Client for Linux?

I only found Oracle 8.1.6 Server for Linux on the download section of oracle.com, but I need the Client, to use with Cold Fusion Server 4.5.1 SP1 on my Linux box...
Where can I get it?
Thanks in advance.
Marco Di Folco.
[email protected]

It is the same file, download it and when you run the installer it will ask you if you are installing th eclient or the server.
Todd

Oracle 10.2.0.3 for Linux x86-64 patchset

Dear Team,
Let us know the url for Oracle 10.2.0.3 for Linux x86-64
64bit patchset
Thanks,
Aj

Hi,
Download patch
Let us know the url for Oracle 10.2.0.3 for Linux x86-64 *5337014* ---------------> RDBMS 10.2.0.3 patchset from http://metalink.oracle.com
Regards,
Xaheer

Oracle Portal Virtual Host Enhacement for Multiple Virtual Hosts

I open the TAR Number: 4326752.996
The TAR is related to " REQUEST ASSISTANCE FOR MULTIPLE VIRTUAL HOSTS AND MULTIPLE PAGE GROUPS CONFIG. "
This is the Scenario: We Have Oracle Portal installed in a single Box. yes I know I know... but Not everybody is Yahoo or Google for Clusters and all the good stuff, we just want our website managed by Oracle Portal since all our ERP is running Oracle Database. Anyway. 1 Box running Oracle Portal Infrastructure and MidTier.
It turns out that our previous configuration we have the LAMP Solution with PHP, Apache with Virtual Servers configuration very trivial for a regular web server however we have about 6 Virtual domains.
For example:
www.abc.com
www.def.com
www.ghi.com
www.jkl.com
www.mno.com
www.pqr.com
We also like to post all our Intranet Information in this great Portal:
http://intranet.com
Where intranet.com is the same server but setup in our Internal DNS without be a Real Internet Register Domain.
So bottom line we start doing great with Install our single box install, later [GRRRRRR does not come by default in port 80 GRRRRRR, ok need to move and setup the virtual host to resolve our main External website www.abc.com ]
For starters ok it worked we have our main website running Oracle Portal.
Now is time to go to the step number 2.
Setup another Page Group in Portal to be the Page_Group_INTERNAL.
I figure if Apache can setup Virtual Hosts pointing to Independent parts of the File System without be shared. I was expecting some kind of custom configuration where I can setup httpd.conf to point to some specific PageGroups to make sure
www.abc.com => Page_Group_External
never share information with:
intranet.com => Page_Gorup_Internal
My TAR was very quick closed with the Argument that is not what It supposed to do.
Since a virtual host is a common thing to do on Linux and Apache, I wonder if You guys could list this as one of the default features to have multiple virtual domains assosiated with Page Groups that they never talk or share Resources I think that would be really great.
In the mean time I guess we have no option but to put a password for every internal page or take the risk of share our Information to the Internet. Perhaps designate another box with Oracle Portal but In that case Is not really cost/bennefit to use a killer technology for our external site since we just have no more than 30 pages.
Anyway just figure drop you guys a note any advise will be really appreciated.
Best Regards Dino.

Hi Martin,
1. To change the target URL of KM resources you can to the following:
Access the URL Generation Service Configuration by navigating to:
System Administration -> System Configuration -> Knowledge Management -> Configuration
Content Management -> Global Services -> URL Generator Service
Change the Host property to "portal.company.com".
2. You change the Port by opening the Visual Administrator and going to : Dispatcher -> Services -> HTTP Provider
Change there the "Ports" entry from (Port:50000,Type:http)to (Port:80,Type:http). Then go on "Save".
3. To remove the "/irj" from the portal URL you can create a index.jsp with the following content, and save it in the J2EE Documentation folder:
<Drive>:\usr\sap\<SAPSID>\JC<J2EE_instance_number>\j2ee\cluster\server0\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root
<%
//Send the redirect using server redirection (not client script)
//This will also send the HTTP GET parameters
String queryString = request.getQueryString() ;
if (queryString==null ) {
response.sendRedirect
("irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default") ;
} else {//redirect with HTTP GET parameters
response.sendRedirect
("irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default?" + queryString) ;
%>
Hope this helps,
Robert

Oracle Portal Portlet 404 Error for Specific Users

I have a single portlet in Oracle Portal that is returning the message "Error: The listener returned the following error: 404 Not Found" that is occurring for just 2 out of my 350+ users. I have tried clearing user cache, clearing portlet cache, deleting these two users from portal and recreating their accounts, changing their usernames, rebooting the entire app server and nothing is working. There are other users for which the portlet will return the exact same data that the 2 problem users are requesting without an issue.
Portal version is 10.1.2.3. Any help that anyone can provide would be greatly appreciated as I am about ready to beat my head against a wall.

Hi Kirk,
Please check below MOS ID, your issue will be resolved.
Error: The Listener Returned The Following Message: 404 Not Found [ID 456421.1]
Mark if this helps you.
Regards,
Kishore

WebDB 2.2 for Linux?

Hi;
I have a nicely working install of Oracle 8i on Linux with remote clients accessing via a variety of tools (SQL Nav, Developer 2000 stuff, PHP, etc).
I now have a requirement for WebDB 2.2 on Linux. I have read some snippets about how you can utilize the Solaris 2.2 WebDB files and the OWS for linux to run WebDB 2.2 on Linux.
Can anyone possibly lend a hand with some more info?
Thanks
Chris Price
Montage IT Services

I have resolved the problem.
I mounted the file system ORACLE in noexec
mode and therefore I could not execute the
commands.
Bye

Oracle 10g R 10.2 for Linux x86-64 - /proc/sys/vm/disable_cap_mlock problem

Hi All,
During installation - Oracle Database Configuration Assistance, I have got below error and thus I stuck. As per Metalink note 293988.1, this will be resolved if I do [root@localhos]# echo 1 > /proc/sys/vm/disable_cap_mlock . But problem is when I do this because I dont have /proc/sys/vm/disable_cap_mlock file in my system, it giving ¨bash: /proc/sys/vm/disable_cap_mlock: No such file or directory¨ error. So I am unable to get rid of this error. I also set SELinux Default and Current mode as permissible and rebooted it.
No use, Its giving same error.
ORA-27125: Unable to create shared memory segment.
DB Details_
Oracle 10g Release 2 (10.2) for Linux x86-64
Choosen Basic Installation
OS Details:_
*[root@localhost vm]# uname -rm*
2.6.32-100.0.19.el5 x86_64
*[root@localhost vm]# uname -a*
Linux localhost.localdomain 2.6.32-100.0.19.el5 #1 SMP Fri Sep 17 17:51:41 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
*[root@localhost etc]# cat /etc/redhat-release*
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
*[root@localhost etc]# make -v*
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for x86_64-redhat-linux-gnu
This is bugging me since last two days. Any help would be appreciated.
Thanks in advance.
Regards,
Mahi

From what I can gather form your post, the ORA-27125: Unable to create shared memory segment is probably the result of:
a) not enough physical memory available.
b) /dev/shm not configured properly.
c) kernel parameters are not set according to Oracle requirements.
Since this is happening during the installation of Oracle I suggest to check the SHMMAX kernel parameter. This is all mentioned in the pre-installation steps. Oracle 11g will actually check these kernel parameters prior to installing. Not sure about 10g now, which you are trying to install.
The most common, easiest way to prepare the system for Oracle RDBMS is to install the "oracle-validated" package. If you don't have access to ULN, you can setup public yum.
http://public-yum.oracle.com/ Then you can simply type as the root user: yum install oracle-validated
Edited by: waldorfm on Nov 3, 2010 1:18 PM

Price: Oracle 9i Enterprise second Edi. for Linux Redhat 9

We are planing to use Oracle 9i Second edition for Linux as our DB for our ecommerce website. Can you please tell me How much that will cost me in USD? Also suggest approprate DB version for Linix Redhat9.

From a shell window within X Windows, type
oemapp dbastudio
and it should launch the main tool.

Problems trying to download Oracle 9i Rel. 2 for linux

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg
I'm trying to download the Oracle 9i Release 2 for Linux (Enterprise/Standard Edition), I have
a Linux Server running Red Hat 7.2, and the browser I am using is Konqueror 3.0.0-12, the exact
problem is that when I agree to the terms of the license, it appears on the screen for a few
seconds the page where the files are in, but it then returns to the page of the license terms
without an error. If I try to download on a Windows PC (with Microsoft's Internet Explorer) it
works. Is it a problem with the browser or with Linux?
Thanks for your helping.
Julio Lopez

-- Unable to download Oracle9i Database Release 2 Enterprise/Standard Edition for Intel Linux:
I have the exact same problem with the Red Hat 7 but even when I try to download on Windows, I am unable to - it gives an invalid page error. I hope I can get an answer as well.
thanks.

Is CVI for linux out ?

Hello all,
I haven't been back here for a while... I've beenusing the beta version of CVI for Linux for the last 6 months or so, but I haven't heard anything about the final version. Has it been released yet ? A quick search didn't lead to anything recent.
Thanks.

Hi,
We do have the NI LabWindows/CVI Run-Time Module for Linux. Here is a white paper that contains information on software recommendations, supported Linux distributions, etc. There is also a list of the differences between the Windows version and Linux version here that lists the exceptions where functions are not supported or behave differently.
Jason
Applications Engineer
National Instruments

Where can I get Oracle 8i 8.1.5 for Linux (RH 6.0) On CD?

I'm stuck in a 28.8 baud neighborhood. Most of my connections
are 14.4 but at night - sometimes - I can get 28.8. There is no
Cable Modem support (Not available), not DSL (maybe by Q1 2999),
and ISDN is foolishly priced ($1800.00 to start and $300.00 per
month.) I have a smalll 100/T Base network with Win95, WinNT
4.0 (Server and Client) and Red Hat 6.0 Linux. I'd really like
to get Oracle 8i 8.1.5 Server for the Linux box and access it
via my NT Client. But, as I mentioned above, downloading is
very impracticle. It would take +100 hours and we have
power/phone outages almost every day. Where can I get this
stuff on a CD?
Thanks
Jeff Schwartz
null

On the oracle store (oraclestore.oracle.com->database->media)
you can order a trial copy for $40 ($39.95). Allow me to ask you
where do you live? I wouldn't like to move into your
neighbourhood.
Jeff Schwartz (guest) wrote:
: I'm stuck in a 28.8 baud neighborhood. Most of my connections
: are 14.4 but at night - sometimes - I can get 28.8. There is
no
: Cable Modem support (Not available), not DSL (maybe by Q1
2999),
: and ISDN is foolishly priced ($1800.00 to start and $300.00 per
: month.) I have a smalll 100/T Base network with Win95, WinNT
: 4.0 (Server and Client) and Red Hat 6.0 Linux. I'd really like
: to get Oracle 8i 8.1.5 Server for the Linux box and access it
: via my NT Client. But, as I mentioned above, downloading is
: very impracticle. It would take +100 hours and we have
: power/phone outages almost every day. Where can I get this
: stuff on a CD?
: Thanks
: Jeff Schwartz
null

Where can I find Oracle Tuxedo Application Rehosting Workbench for Linux?

Actually it is in the absolutely wrong place , but I publish this in behalf of other people searching for this so they will not waste 2 hours like I did. It is , of course , under Windows platform products - if you search under Linux you will not find anything.
https://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=15364657

Please see these links.
Oracle Tuxedo Downloads
http://www.oracle.com/technetwork/middleware/tuxedo/downloads/index.html
Oracle Software Delivery Cloud
https://edelivery.oracle.com/
If you could not find the software then please log a SR or contact your Oracle Sales representative.
Thanks,
Hussein

Oracle instant Client and unixODBC for Linux has Error

Hi experts,
I have two Redhat EL 5. On the first Rehat(xxx.xxx.xxx.121 --> called Redhat1) I have installed Oracle 10g database server. On the second Redhat(xxx.xxx.xxx.123 --> called Redhat2) I want to connect to Oracle database server on xxx.xxx.xxx.121 via ODBC. But it does not work. Pls help me!
I have done steps as following:
Login to Redhat2 as root and type commands:
1)Install Instant Client + sqlplus
# rpm -ivh oracle-instantclient-basic-10.2.0.4-1.i386.rpm
# rpm -ivh oracle-instantclient-sqlplus-10.2.0.4-1.i386.rpm
2)Setting environment variable
# LD_LIBRARY_PATH=/usr/lib/oracle/10.2.0.4/client/lib:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
# SQLPATH=/usr/lib/oracle/10.2.0.4/client/lib:${SQLPATH}; export SQLPATH
3)Testing connection to Redhat1(Oracle DB server) using sqlplus
# sqlplus abc/[email protected]:1521/lab2
Connected.
5)Begin to install unixODBC
# rpm -ivh oracle-instantclient-odbc-10.2.0.4-1.i386.rpm
# rpm -ivh unixODBC-2.2.11-7.1.i386.rpm
# rpm -ivh unixODBC-devel-2.2.11-7.1.i386.rpm
# rpm -ivh unixODBC-kde-2.2.11-7.1.i386.rpm
6)After installation above packages I check for existing of odbc.ini and odbcinst.ini in /etc --> ok
# ls /etc | grep odbc
odbc.ini
odbcinst.ini
7) Tar unixODBC-2.2.14-linux-x86-32.tar.gz and copy file to /usr/local/bin, /usr/local/include, /usr/local/lib
# tar -xzf unixODBC-2.2.14-linux-x86-32.tar.gz
# ls /usr/local/bin/
dltest isql iusql odbc_config odbcinst
# ls /usr/local/include
autotest.h odbcinstext.h odbcinst.h sqlext.h sql.h sqltypes.h sqlucode.h unixodbc_conf.h uodbc_extras.h uodbc_stats.h
# ls /usr/local/lib
libboundparam.la libgtrtst.la libodbccr.la libodbcinst.la libodbc.la
libboundparam.so libgtrtst.so libodbccr.so libodbcinst.so libodbc.so
libboundparam.so.1 libgtrtst.so.1 libodbccr.so.1 libodbcinst.so.1 libodbc.so.1
libboundparam.so.1.0.0 libgtrtst.so.1.0.0 libodbccr.so.1.0.0 libodbcinst.so.1.0.0 libodbc.so.1.0.0
# NLS_LANG=AMERICAN_AMERICA.UTF8; export NLS_LANG
# TNS_ADMIN=/root; export TNS_ADMIN
# ODBCINI=/etc/odbc.ini; export ODBCINI
7)Retest sqlplus to Redhad1(Oracle database server) with local tnsname
# sqlplus vonphoto/vonphoto@lab2
SQL*Plus: Release 10.2.0.4.0 - Production on Sat Mar 27 03:20:55 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
8) Edit odbc.ini and odbcinst.ini
---odbcinst.ini
# Included in the unixODBC package
[Oracle 10g ODBC driver]
Description = Oracle ODBC driver for Oracle 10g
Driver = /usr/lib/oracle/10.2.0.4/client/lib/libsqora.so.10.1
Setup =
FileUsage =
CPTimeout =
CPReuse =
---odbc.ini
[ora_dns]
Driver = Oracle 10g ODBC driver
DSN = ora_dns
ServerName = xxx.xxx.xxx.121
UserID = vonphoto
Application Attributes = T
Attributes = W
BatchAutocommitMode = IfAllSuccessful
BindAsFLOAT = F
CloseCursor = F
DisableDPM = F
DisableMTS = T
EXECSchemaOpt =
EXECSyntax = T
Failover = T
FailoverDelay = 10
FailoverRetryCount = 10
FetchBufferSize = 64000
ForceWCHAR = F
Lobs = T
Longs = T
MetadataIdDefault = F
QueryTimeout = T
ResultSets = T
SQLGetData extensions = F
Translation DLL =
Translation Option = 0
DisableRULEHint = T
TraceFile = /backup/sql.log
Trace = Yes
9)Testing the driver and the data source
# odbcinst -q -d
[Oracle 10g ODBC driver]
# odbcinst -q -s
[ora_dns]
10) Test connection via ODBC from Redhat2(xxx.xxx.xxx.123) to Redhat1(xxx.xxx.xxx.121)
# isql -v ora_dns
isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directory
I have spent 4 days to search on the internet. But it still error.
Pls help me.

Apologies - thought it was a database to database connection that you were trying to create.
isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directoryThe readline library is in package readline-4.3-13 on RHEL4 and in readline-5.1-1.1 for RHEL5 on my servers (minor version number are of course dependent on the kernel version used).
This is also not an ODBC or Oracle issue. It seems that isql is using rlwrap or similar - this requires the readline library. And possibly LD_LIBRARY_PATH to be set too.

Oracle instant Client and unixODBC for Linux not work

Hi experts,
I have two Redhat EL 5. On the first Rehat(xxx.xxx.xxx.121 --> called Redhat1) I have installed Oracle 10g database server. On the second Redhat(xxx.xxx.xxx.123 --> called Redhat2) I want to connect to Oracle database server on xxx.xxx.xxx.121 via ODBC. But it does not work. Pls help me!
I have done steps as following:
Login to Redhat2 as root and type commands:
1)Install Instant Client + sqlplus
# rpm -ivh oracle-instantclient-basic-10.2.0.4-1.i386.rpm
# rpm -ivh oracle-instantclient-sqlplus-10.2.0.4-1.i386.rpm
2)Setting environment variable
# LD_LIBRARY_PATH=/usr/lib/oracle/10.2.0.4/client/lib:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
# SQLPATH=/usr/lib/oracle/10.2.0.4/client/lib:${SQLPATH}; export SQLPATH
3)Testing connection to Redhat1(Oracle DB server) using sqlplus
# sqlplus abc/[email protected]:1521/lab2
Connected.
5)Begin to install unixODBC
# rpm -ivh oracle-instantclient-odbc-10.2.0.4-1.i386.rpm
# rpm -ivh unixODBC-2.2.11-7.1.i386.rpm
# rpm -ivh unixODBC-devel-2.2.11-7.1.i386.rpm
# rpm -ivh unixODBC-kde-2.2.11-7.1.i386.rpm
6)After installation above packages I check for existing of odbc.ini and odbcinst.ini in /etc --> ok
# ls /etc | grep odbc
odbc.ini
odbcinst.ini
7) Tar unixODBC-2.2.14-linux-x86-32.tar.gz and copy file to /usr/local/bin, /usr/local/include, /usr/local/lib
# tar -xzf unixODBC-2.2.14-linux-x86-32.tar.gz
# ls /usr/local/bin/
dltest isql iusql odbc_config odbcinst
# ls /usr/local/include
autotest.h odbcinstext.h odbcinst.h sqlext.h sql.h sqltypes.h sqlucode.h unixodbc_conf.h uodbc_extras.h uodbc_stats.h
# ls /usr/local/lib
libboundparam.la libgtrtst.la libodbccr.la libodbcinst.la libodbc.la
libboundparam.so libgtrtst.so libodbccr.so libodbcinst.so libodbc.so
libboundparam.so.1 libgtrtst.so.1 libodbccr.so.1 libodbcinst.so.1 libodbc.so.1
libboundparam.so.1.0.0 libgtrtst.so.1.0.0 libodbccr.so.1.0.0 libodbcinst.so.1.0.0 libodbc.so.1.0.0
# NLS_LANG=AMERICAN_AMERICA.UTF8; export NLS_LANG
# TNS_ADMIN=/root; export TNS_ADMIN
# ODBCINI=/etc/odbc.ini; export ODBCINI
7)Retest sqlplus to Redhad1(Oracle database server) with local tnsname
# sqlplus vonphoto/vonphoto@lab2
SQL*Plus: Release 10.2.0.4.0 - Production on Sat Mar 27 03:20:55 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
8) Edit odbc.ini and odbcinst.ini
---odbcinst.ini
# Included in the unixODBC package
[Oracle 10g ODBC driver]
Description = Oracle ODBC driver for Oracle 10g
Driver = /usr/lib/oracle/10.2.0.4/client/lib/libsqora.so.10.1
Setup =
FileUsage =
CPTimeout =
CPReuse =
---odbc.ini
[ora_dns]
Driver = Oracle 10g ODBC driver
DSN = ora_dns
ServerName = xxx.xxx.xxx.121
UserID = vonphoto
Application Attributes = T
Attributes = W
BatchAutocommitMode = IfAllSuccessful
BindAsFLOAT = F
CloseCursor = F
DisableDPM = F
DisableMTS = T
EXECSchemaOpt =
EXECSyntax = T
Failover = T
FailoverDelay = 10
FailoverRetryCount = 10
FetchBufferSize = 64000
ForceWCHAR = F
Lobs = T
Longs = T
MetadataIdDefault = F
QueryTimeout = T
ResultSets = T
SQLGetData extensions = F
Translation DLL =
Translation Option = 0
DisableRULEHint = T
TraceFile = /backup/sql.log
Trace = Yes
9)Testing the driver and the data source
# odbcinst -q -d
[Oracle 10g ODBC driver]
# odbcinst -q -s
[ora_dns]
10) Test connection via ODBC from Redhat2(xxx.xxx.xxx.123) to Redhat1(xxx.xxx.xxx.121)
# isql -v ora_dns
isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directory
I have spent 4 days to search on the internet. But it still error.
Pls help me.

I don't understand your step 7 (the first step 7, actually).
What is that unixODBC-2.2.14-linux-x86-32.tar.gz, where did it come from, and why are you doing all that?
unixODBC should be installed after step 5.
I guess that that is the cause of your problem.
isql is not linked against readline at all on my RHEL 5 system.
Do you notice any improvement after removing the files from that tar.bz file?
Yours,
Laurenz Albe

Oracle Portal (WebDB 3.0) for linux out yet?

Similar Messages

Maybe you are looking for