Oracle RAC 10g on Windows XP Professional

Hi All,
I read many articlaes that we can not install Oracle 10g RAC on Windows xp professional but the problem is I have a laptop where I am installing VMWARE with Unix O/S I can not upgrade my XP to Server edition as I do not have money o buy license.
Please help me what all files I need to change to make my XP one of the nodes os RAC 10g.

Thanks for replying.
Can by downloading the kit,I will be able to install Oracle RAC?
My question was:
I have windows xp on my machine.I have vmware software also.I need to install Oracle RAC 10g on winxp and an guest opertaing system which will be linux.I want to test RAC by making 1 node on linux and one node on guest operating system winxp.
Problem is RAC can only be installed on Server edition.Can it be possible to do it on WinXP?

Similar Messages

PLSQL 10g on Windows 7 Professional

Hi everyone,
I have installed Oracle Client 10g on Windows 7 Professional, but when I run PLSQL and type all of my user credentials my PLSQL window closes, but if I right click on the icon and choose run as administrator or run this program in compatibility mode works pretty well. Is there a way to make it work without having all these issues?

Hi everyone,
I downloaded the version called Oracle 10g client from the Oracle website and I only choosed the options SQL Plus and Net Configuration Assistant to install, but after I make all the connection requirements to connect to Oracle, when I run SQL Plus Release 10.2.0.1.0 and type username and password it dissapear, but if I open SQL Plus using right click to run as administrator works fine.
I don't understand how come older versions like 8.0 works fine on Windows 7, but the newest don't.

Installin Oracle 10G on Windows XP Professional Virtual running

I have a Windows 7 Professional installed on my Laptop. I am trying to install Oracle 10 G on Windows XP Professional which comes with windows 7 Professional . Installation works fine but database administration page does not appear on reboot. Please let me know how to fix it please.

c:> emctl start dbconsole

Oracle 10g on Windows XP Professional SP2

I have problem installing oracle 10 g on Windows XP Professional. When the installation goes to "Configuration Assistants", it shows three options, Oracle Net configuration Assistant, Oracle Database Configuration Assistant and iSQL *Plus Configuration Assistant. However, the status of "Oracle Net Configuration Assistant" keep showing "In progress.." for more than 6 hours. It seems the program is not responding, then I stopped the program, uninstall it and tried to install it again but the installation still stopped at "Configuration Assistants". I did the installation/uninstall 3 times already. Could anyone help and provide some solutions?

Thanks Eric Jenkinson for the reply.
I tried the link listed above and I have some troble installing the sample database. Here are some problems.
1) During the"completing database creation process" (About 85% finished), a window pops up and it said please see the following file for details.
C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\sample\emConfig.log
in tnhe log file I see the following in the last few lines
oracle.sysman.emcp.util.PlatformInterface serviceCommand
: Waiting for service 'OracleDBConsolesample' to fully start
: oracle.sysman.emcp.EMConfig perform
: C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\sample\emConfig.log
oracle.sysman.emcp.EMConfig perform
: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: start「database control」
     at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:569)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:181)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:150)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:430)
     at java.lang.Thread.run(Thread.java:534)
2) Then I tried to enter the Enterprise Manager Database control
by entering http://home:1158/em
However, the URL changed to
http://home:1158/em/console/database/instance/repDown
I opened the portlist.ini and got 1158
Enterprise Manager Console HTTP Port (sample) = 1158
(home is the PC name)
In the web page, it said the following
"Enterprise Manager is not able to connect to the database instance "
Anyone have any idea? Thank you so much.

Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0

Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi

Hi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho

Gracefully Shutting all the services pertaining to Oracle RAC 10g R2

Hi !!
Can anyone guide me in Gracefully Shutting Down All the services, processes pertaining to Oracle RAC 10g R2 - Clusterware, Oracle Software, Oracle RAC Database, Netservices, EMConsoles......
Any Scripts / Metalink ID's / Comments would be very much helpful....
Cheers n Thanks

If its for both Linux and Windows .... Then it would be better ...

Install Oracle RAC 10g (10.2.0.1) on HP-UX B.11.31 U ia64 failed

Hi All
I am installing Oracle RAC 10g 10.2.0.1 on HP-UX B.11.31 U ia64 but can not complete
hosts file
#Public IPs
10.144.1.111 spgdb01
10.144.1.112 spgdb02
#Private IPs
10.144.2.2 spgdb01p
10.144.2.3 spgdb02p
#Virtual IPs
10.144.1.113 spgdb01v
10.144.1.114 spgdb02v
I do installation with runInstaller without error. It copy and link is ok. When I run root.sh then It cannot complete as following
Checking to see if Oracle CRS stack is already configured
Checking to see if any 9i GSD is up
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/oracle/product/10.2.0' is not owned by root
WARNING: directory '/oracle/product' is not owned by root
WARNING: directory '/oracle' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 0: spgdb01 spgdb01p spgdb01
node 1: spgdb02 spgdb02p spgdb02
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
Now formatting voting device: /ora/crs/votedisk01
waitpid(-1, 0x7fffdf50, WUNTRACED) .................................................................................................... [sleeping]
Now formatting voting device: /oracle/oradata1/crs/votedisk02
Now formatting voting device: /oracle/oradata2/crs/votedisk03
Format of 3 voting devices complete.
Startup will be queued to init within 30 seconds.
====================
I have waited for 10 mins but still not complete
Additionally, log from runInstaller, I got
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-04-28_12-13-31AM. Please wait ...-bash-4.2$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
Private Interconnect : null
Private Interconnect : null
Private Interconnect : null
Private Interconnect : null
So, please help me fix this issue
Thank you

I had this problem and resolved it by transporting the file to the installation server with the correct ftp datatype (binary).
On page 54 of the install guide (..Server\Oracle_Business_Intelligence\doc\doc\bi.1013\b31765.pdf) that comes with the installation files, there is an instruction to make sure that any ftp activity is done in binary.
This may not have occured with the license.xml file if you use a tool which offers the "feature" of automatic datatype recognition.
Hope this helps.

Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
specific settings in Oracle RAC setup for performance evaluations?
Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
balancing)
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
Edited by: user2033016 on Jun 29, 2011 10:02 PM

user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed?

Forward me the link for installing Oracle Client 10g on Windows 7 64-bit?

Hi
Can anybody send me the link for downloading Oracle Client 10g on Windows 7 64-bit?
Regards

Arizuddin wrote:
Actually i installed TOAD for oracle v9.5 on laptop with Windows 7 ultimate
it gives 'Cannot find OCI DLL: oci.dll'. It seems TOAD for Oracle is a 32-bit only app, which means that it requires a 32-bit Client.
You might also want to stay away from installing Toad under "Program files (x86)".
Consider taking a look at Oracle SQL Developer - a very good alternative to the toad.
http://www.oracle.com/technetwork/developer-tools/sql-developer/index.html
For other questions specific to Toad, please see e.g. toadfororacle.com.

Problem after installing Oracle DevSuite 10g on Windows 7 (64-bit)

Hi All,
I have successfully installed Oracle DevSuite 10g on Windows 7 -64 bit machine.
But when I open the existing .rdf file which is having around 3MB file... report builder is getting closed automatically. And the same is working for the .rdf file having just 100 KB file.
Can anyone please guide me thru?
Thanks,
Harish Nunna

5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     IBM AIX on POWER Systems (64-bit) (American English)     General     Oracle Fusion Middleware Family     Apr 8, 2008     2.1 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Oracle Solaris on x86 (32-bit) (American English)     General     Oracle Fusion Middleware Family     Aug 29, 2008     1.6 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     IBM: Linux on POWER Systems (American English)     General     Oracle Fusion Middleware Family     Jul 17, 2008     1.1 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Microsoft Windows Itanium (64-bit) (American English)     General     Oracle Fusion Middleware Family     Jun 3, 2008     2 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     HP Tru64 UNIX (American English)     General     Oracle Fusion Middleware Family     May 16, 2008     1.7 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Linux Itanium (American English)     General     Oracle Fusion Middleware Family     May 14, 2008     1.6 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     IBM: Linux on System z (American English)     General     Oracle Fusion Middleware Family     Sep 15, 2009     1.5 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Linux x86 (American English)     General     Oracle Fusion Middleware Family     Apr 5, 2008     1.7 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     HP-UX PA-RISC (64-bit) (American English)     General     Oracle Fusion Middleware Family     Apr 4, 2008     1.9 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     HP-UX Itanium (American English)     General     Oracle Fusion Middleware Family     Apr 4, 2008     1.6 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Oracle Solaris on SPARC (64-bit) (American English)     General     Oracle Fusion Middleware Family     Mar 8, 2008     1.7 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Microsoft Windows (32-bit) (American English)     General     Oracle Fusion Middleware Family     Mar 8, 2008     1.6 GB
None of these say windows -7 patch. Its only for windows 32 bit.

Failover not happening the Oracle RAC 10g

Hi All,
I am new to RAC.
I have installed Oracle RAC 10g on Redhat Linux 4.0. Till yesterday failover was happening that is when i stopped one instance on node01 the vip of node01 was transferred to node02.This was shown using ifconfig -a but now that is now happening.Don't know as what has happened.Can you please help me out
Below information is given:
[oracle@node01 ~]$ crs_stat -t
Name Type Target State Host
ora.hitesh.db application ONLINE ONLINE node02
ora....h1.inst application ONLINE ONLINE node01
ora....h2.inst application OFFLINE OFFLINE
ora....SM1.asm application ONLINE ONLINE node01
ora....01.lsnr application ONLINE ONLINE node01
ora.node01.gsd application ONLINE ONLINE node01
ora.node01.ons application ONLINE ONLINE node01
ora.node01.vip application ONLINE ONLINE node01
ora....SM2.asm application ONLINE ONLINE node02
ora....02.lsnr application ONLINE ONLINE node02
ora.node02.gsd application ONLINE ONLINE node02
ora.node02.ons application ONLINE ONLINE node02
ora.node02.vip application ONLINE ONLINE node02
Listner status on node01 is given:
[oracle@node01 ~]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 06-APR-2013 12:59:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER_NODE01
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 06-APR-2013 11:59:03
Uptime 0 days 1 hr. 0 min. 25 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /home/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /home/oracle/oracle/product/10.2.0/db_1/network/log/listener_node01.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.131)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status BLOCKED, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+ASM1", status BLOCKED, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "hitesh" has 2 instance(s).
Instance "hitesh1", status READY, has 2 handler(s) for this service...
Instance "hitesh2", status READY, has 1 handler(s) for this service...
Service "hiteshXDB" has 2 instance(s).
Instance "hitesh1", status READY, has 1 handler(s) for this service...
Instance "hitesh2", status READY, has 1 handler(s) for this service...
Service "hitesh_XPT" has 2 instance(s).
Instance "hitesh1", status READY, has 2 handler(s) for this service...
Instance "hitesh2", status READY, has 1 handler(s) for this service...
The command completed successfully
[root@node01 oracle]# crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthy
[root@node01 oracle]# ps -ef | grep lmon
oracle 5741 1 0 12:07 ? 00:00:03 ora_lmon_hitesh1
root 22582 20805 0 13:01 pts/2 00:00:00 grep lmon
oracle 23643 1 0 11:58 ? 00:00:01 asm_lmon_+ASM1
Please let me know what information else is required
Edited by: user12924280 on Apr 6, 2013 12:36 AM

Since you didn't say "thank you", I assumed my time was of no value to you.
However, I shall try again.
There is no relationship between instance failure and VIP failover. How can there be? What if you are running ten instances on each node, and one fails? Would you want the VIP to relocate? And I've already told you how to test it: kill the node. Just reboot it.

Upgrade oracle rac 10g r2 10.2.0.3 to 10.2.0.4

Hi all,
I goint to upgrade oracle rac 10g r2 10.2.0.3 to 10.2.0.4 on Solaris 9, in the README file(patchset) does not say that upgrade the OCR, but int he Doc ID 316889.1 to say; it is necessary to upgrade or nothing happens if Iit does not upgrade?
Mexman
Edited by: ACS on 28/10/2009 12:19 PM

Hi!
I suppose if you have a Metalink note on which explains is necessary update OCR you must follow it. Software maker always are in reason!
Chiao!

Oracle RAC 10g on Solaris 10 in a non-global zone

I need to run Oracle RAC 10g on Solaris 10 in a non-global zone as I must cap the CPUs used for Oracle licensing limitations. My question is a simple one, but one for which I'm getting conflicting information depending upon whom I ask.
If I want to run RAC in a non-global zone on two nodes, does this require the use of Solaris Cluster?
I know there are good reasons to use Solaris Cluster, but the company for which I work cannot afford the additional expense of Solaris Cluster at this time. Is it possible to run Oracle RAC 10g in a capped container without Solaris Cluster or is Solaris Cluster absolutely required?
Thanks in advance for any insight you can provide.

AFAIK, Oracle 10g RAC is not supported in solaris containers.
It is however supported in Solaris zone clusters...in order to use it, you would have to use Sun Cluster 3.2 (iinm).

Oracle RAC 11g On Window Server 2003 Installation Step by Step

Hi all
I tired searching onlie to get steps of installationg Oracle RAC 11g On Window Server 2003
I have tow nodes
EMC storage
Any body can help please ...
Thanks in Advance.
Edited by: MHAIDAR on Jun 15, 2011 1:19 AM

I tired searching onlie to get steps of installationg Oracle RAC 11g On Window Server 2003check this
http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnWindows2003UsingVMware.php

Domain migration of Oracle RAC nodes on windows 2008

Hello masters,
We are planning to migrate servers from old domain to a new domain due to company name change. That is, our DB servers named like db-node-x.old-domain.com will be migrated to db-node-x.new-domain.com. The servers are all on Windows 2008 R2 and Oracle RAC 11g2. As dba, i have no idea about what will happen to DBs. Please let me know any possible solutions?
Thanks in advance.

user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed?

Oracle RAC 10g on Windows XP Professional

Similar Messages

Maybe you are looking for