Oracle Real time decesioning tool

Hi,
I have 2 questions in Oracle RTD.
1)I am using Oracle BI 11.1.1 and I want to change the persistance interval to 5 mins by default it is 60 mins So medel counts are getting incremented after 1 hr.
So can you help us to reduce the persistance interval.
2)RTD SDDS database is not refreshing automatically bacause we are unable to change the values in JConsole.
To reflect the data we are manually refreshing models and running the method CompleteSnapshot.
Please help us in resolving the issues.
Note:To Solve question 1 we tried to change the value in Application-->ModelDefaults-->Persistance level but its not getting incremented.

Hi,
Try Mark Rittman's blog:
http://www.rittmanmead.com/category/real-time-decisions/
Good Luck,
Daan Bakboord

Similar Messages

  • Where can i check in the real time monitoring tool if there are active calls in progress?

    where can i check in the real time monitoring tool if there are active calls in progress? 

    Hi
    Selecting Call Manager -->Call Process ---> call activity
    HTH
    Regards
    Carlo

  • Oracle Real TIme Decisions

    Hi,
    I've installed OBIEE 11g server in my local machine. I Would like to know the URL to launch Oracle Real time decisions. Could anyone plz help me.
    Regards,
    Arun

    Hi,
    Use the below link:
    http://machinename:9704/ui
    if you are trying to launch RTD in the same machine where you installed BI 11g then try with localhost/ipaddress/machine name
    http://localhost:9704/ui
    hope it helps!
    Regards,
    Pandian

  • Oracle Real Time Decisions (RTD)

    Hi,
    We r trying to setup an Oracle Real Time Decisions (RTD) environment.
    Can any one pls let me know how to integrate Oracle Real Time Decisions (RTD) with Siebel CRM & Oracle BI EE.
    Any document would be of great help.
    Your kind response will be appreciated.
    Thanks.

    Hi,
    Try Mark Rittman's blog:
    http://www.rittmanmead.com/category/real-time-decisions/
    Good Luck,
    Daan Bakboord

  • Real time ETL tool

    I wanted to know if Oracle has a ETL tool? and if so is it possible to get real time Data extraction form our application for our Datawharehouse ( not incremental)
    null

    Oracle's Extract Transform and Load(ETL) tool is known as Oracle Warehouse Builder(OWB). The ETL process is primarily incremental.
    TCL('tickle')scripts can be registered with Oracle Enterprise Manager. These are used to schedule and run initial and incremental loader jobs.
    null

  • Real time visual tools

    Hi all,
    Is there any other real time visual administration tools like and other than iHAT...

    Hi shail,
    right iHAT is pretty fine.I have deployed it and is nice but felt EM's topology view is better than iHAT itself.
    i feel more a lil more enhancements should be made for real -time statistics like load,performance,n/w traffiic,whats going on inside oc4j (which EM already gives info of) etc, because EM needs to be constantly refreshed all the time manually at most pages for real-time values...if every page is automated refreshed then it EM would be even good.EM is really awesome but a lil more enhancements would be cool.This is my opinion lop :P
    Edited by: wings on Jul 28, 2009 11:21 AM
    Edited by: wings on Jul 28, 2009 11:22 AM
    Edited by: wings on Jul 28, 2009 11:23 AM

  • Real Time Monitor Tool - Charting

    Afternoon all,
    I am using RTMT 8.1 to monitor Call Activity on a specific H323 gateway within our voice network. I've produced the chart which is correctly showing me real time information over a period of a couple of minutes. However, I want to display the chart over a period of 24 hours.
    Do I need to change the polling rate to 30 or 60 minutes and allow the chart to run for 24 hours before presenting it? Is there any way of producing historical data on RTMT? Any help would be apprecaited.
    Regards, Jamie

    Hi Jamie,
    Indeed in RTMT itself you should be able to achieve it by setting in counter properties "No. of data points shown on chart" to 50.
    Next form Edit > Polling Rate. Set it to 30 minutes. Now it shown over 24 hours but with sample rate of 2/hour it may not really be useful.
    So it would be better to have a higher sample rate and use the "Start counter logging" option to log the results to a locale csv file. So you can review the data afterwards with permformance log viewer or with Windows permance (perfmon.msc) from that locale csv file. Though you would need to leave RTMT running to log this information.

  • Cisco Unified Real-Time Monitoring Tool Administration Guide

    Hello Pros,
    I am in process of upgrading CUCM from 8.6 to 9.1.2 and receiving "not enough disk space on the partition" error.
    The show status from CLI shows 13499216K free space but I don't understand why we are getting the error message. I tried FTP and SFTP, from GUI and CLI with no luck.  Do I need to start deleting files (traces, firmwares, etc..)? Even if I do so it wil free up the space in active partition and change nothing in my inactive partition as all thoses files are in my active partition.  Your help is very much appreciated.
    Memory Total:        4016964K
            Free:         161516K
            Used:        3855448K
          Cached:        1745416K
          Shared:              0K
         Buffers:           9216K
                            Total            Free            Used
    Disk/active         14410496K        2301468K       11960264K (84%)
    Disk/inactive       14410560K       13499216K         167512K (2%)
    Disk/logging        50179664K       18651876K       28937612K (61%)
    MK

    Hi MK,
    If the percentage of disk usage is above the high water mark that you configured, the system sends an alarm message to syslog, generates a corresponding alert in RTMT Alert Central, and automatically purges log files until the value reaches the low water mark. So, try lowering the high water mark value as well and then restart the Log Partition Monitoring service.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/6_1_1/rtmt/611-rtmt-admin/rtalert.html#wp1270174
    HTH
    Manish

  • Oracle Real Time Scheduler(ORS) Integration

    Hi,
    Currently I am working on ORS integration with the help of web- services. I created a web-service client in java but I am not able to receive a response from the ORS. When I use the soapUI to send the request the response that I receive is an XSD.
    Can you please help me out as to how to get a response from ORS.
    Thanks in advance
    Vikram

    Hi,
    Hi,
    I am also looking for the same..
    Did you get any link or documents?
    Thanks,
    Dev

  • Integration between Webcenter Sites and Oracle Real time Decision(RTD)

    Hi,
    I want to integrate RTD with Webcenter Sites for automated targetting purpose. Can you please provide any implementation view on this?
    Thanks,
    Krishnendu Chatterjee

    Hi,
    Hi,
    I am also looking for the same..
    Did you get any link or documents?
    Thanks,
    Dev

  • Authoritative, Real-time, Spinning Beach Ball Diagnostic Tool/Utility?

    Dear Mac Mavens,
    Is there an effective, real-time diagnostic tool/utility that authoritatively explains why my Mac is so-darn-slow...soooo mmaaannnnyyyyy times during the day?
    The spinning beach ball is ubiquitous on my machine.
    For example:
    Sometimes--but not always--it can take Evernote, MS-PowerPoint, MS-Word, MS-Excel, and the like, as long as 3-5 minutes to become active.
    Another example: Viewing "Open Recent" in just about any application can take 2-4 minutes.
    Sometimes, again, not always: it can take 2-3 minutes for a browser tab to open.
    To date, I have purchased, and run, virtually all the major "Keeper," "Cleaner," "Go Faster," "Tools" utilities (each promising to speed up a Mac)...but none of them either report a meaningful problem (however, some of the do report many, many trivial problems)--and none of them have had any effect whatsoever on system performance.
    Also, I constantly check "Monitor" (which routinely reports CPU at ~3-7%) and iStat Mini (which routinely reports CPU at ~5%). Additionally, many, many times, I've examined the console.logs looking (without success) for anomalous events.
    Hence this request. Is there a useful tool/utility/magic incantation which can help diagnosis this productivity-sapping issue and explain--in real-time--the cause of a spinning beach ball?
    Conjecture: Given the consistently low reported CPU utilization...16Gb memory (1333 MHz DDR3)...1Tb SATA disk...2.8 GHz Intel Core 5 (1 processor, 4 cores)...in this somewhat beefy Mid-2010 27-inch--could the dominant constraint be the internal bus? If the bus is relatively slow...would that explain the too, too frequent beach ball?
    Your specific suggestions are welcomed and greatly appreciated; thank you.
    Plane Wryter

    When you have the problem, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • What is the sql query for the real time reports Resource Stats?

    Does anyone know what the query is that the real time report tool uses for the Resource Stats page?  Trying to develop a custom report that displays similar information that is updated regularly.

    Hi,
    009 wrote:
    Hi Frank,
    Just wanted your opinion on the above given SQLI'm not sure I understand it.
    I added some more formatting to help me read it:
    SELECT      A
    ,     CASE WHEN LAG(A,1) OVER (ORDER BY A) IS NULL
              OR A=LAG(A,1) OVER (ORDER BY A)
              THEN LAG(B,1) OVER (ORDER BY A)
         END B_LAG
    ,     B
    FROM     (
         SELECT A, B
         FROM
              SELECT '1'A,'Apple' B FROM DUAL UNION ALL
              SELECT '1'A,'cat'B FROM DUAL UNION ALL
              SELECT '2'A,'bat'B FROM DUAL UNION ALL
              SELECT '3'A,'rat'B FROM DUAL UNION ALL
              SELECT '2'A,'yellow'B FROM DUAL UNION ALL
              SELECT '1'A,'pin'B FROM DUAL
         CONNECT BY PRIOR A=B
         ORDER BY A
    );What is the purpose of the CONNECT BY in what you have so far?
    Is the idea that you will add another CONNECT BY query, using
    CONNECT BY  b_lag  = PRIOR b?
    Do you think that will be better than using ROW_NUMBER?
    Will it work if (a, b) is not unique?

  • CAD Real Time Stats show NA for agent state and call log

    Hello
    For our lab uccx, the agent/users CAD display shows NA for the agent state and call log.  I have
    Not Ready and Log out codes set and have the testers do those actions to generate data.
    I have rebooted the server and have also checked the services page and confirmed
    all the services are running.
    I went through the admin guide to see if I missed any configuration but does not appear so.
    I tried launching the real time stats tool from the UCCX Admin and it launches OK
    but I noticed that it shows not connected.
    Note this is over a VPN to the UCCX.
    So not sure if this is related.  I checked the relase notes and this is the base install
    of UCCX 8.5.  I am going to install the service updates but wanted to see if I can
    get this running before I schedule a maint window to do the upgrades.
    Thanks
    Mike Kana

    Hi
    you might be facing an issue where " uccxcaduser password" gets corrupted , which leads to the issue you are facing right now
    you have to contact TAC to reset that password for you and your issue will be fixed ,100%
    Note : Only TAC can reset this password

  • Oracle JRockit Real Time 3.1.2 and weblogic?

    http://www.oracle.com/technology/software/products/jrockit/index.html". I go to the website, and find a software called: Oracle JRockit Real Time 3.1.2 for windows 64 bit. My question is: In order to let weblogic 9.2 works in windows 2003 R2 64 bit machine, SHOULD I MUST DOWNLOAD "Oracle JRockit Real Time 3.1.2 for windows 64 bit"? Or I don't need to download anything? Actually, I just download a file called jdk-6u18-windows-x64.exe. Please clear my question, thanks! One more thing, what is the functionality for Oracle JRockit Real Time 3.1.2? Is it a kind of JRE ?

    Hi,
    For more information on JRocket Real Time have a read of :- http://www.oracle.com/technology/products/jrockit/jrrt/index.html
    As far as I am aware you don't have to install the real time product you can installl the JRockit JVM and use that with Weblogic, I think newer version of JRocket come bundled with Real Time which is the JVM and monitoring and analysis tools. There are still standalone JRocket JVM installs available, you can get them from oracle edelivery.
    JRocket is a JVM but optimized for use with Weblogic, so you should get better overall performance.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to replicate data  between Oracle db and SQL server dbs in real time?

    Hello,
    Anyone has idea that what tool we can use to do data replication in real time between Oracle and SQL sever or Oracle and Sybase or Sql server and Sybase?
    This is topic is brought by a project manager?
    I only know Oracle to Oracle dbs by streams or GoldenGate.
    Thanks
    Jerry

    Since GoldenGate's bread and butter was (and is) replicating data between heterogeneous data sources, and since Oracle has purchased GoldenGate, that would seem like a natural place to start.
    Beyond that, it depends on the architecture you want and how you define "real time." Just about any ETL tool on the market, whether Oracle's ODI or OWB or any number of third party products (Informatica, DataStage, etc) can handle "trickle feeds" from various data sources to a database target of your choosing. Different tools will have different sorts of integration with the source database, many will require that a bunch of triggers are created to track changes on the source systems.
    If you want Oracle to control the replication process (which doesn't really make sense if we're talking about replication from a non-Oracle database to another non-Oracle database), you can use the Oracle Transparent Gateway products to create database links from Oracle to the non-Oracle databases and query data on the source database periodically.
    Justin

Maybe you are looking for