Oracle Reports Security Settings page is blank

Hi All,
When i click on "Oracle Reports Security Settings" under Administer tab and i'm getting a blank page. I didn't see any error messages.
Pl. help.
Thanks,
Sapna

Hi,
Which version of portal are you using? Looks like it is a bug.
Thanks,
Sharmila

Similar Messages

  • Oracle Reports Security Settings page is blank--Urgent Please

    Hi All,
    When i click on "Oracle Reports Security Settings" under Administer tab and i'm getting a blank page. I didn't see any error messages.
    Pl. help.
    Thanks,
    Sapna

    Please refer to duplicate thread on the same topic at
    error getting value from collection to a date picker field

  • Oracle Reports Security Settings is blank(Urgent please.......)

    Hi All,
    When i click on "Oracle Reports Security Settings" under Administer tab and i'm getting a blank page. I didn't see any error messages.
    Pl. help.
    Thanks,
    Sapna

    Please refer to duplicate thread on the same topic at
    error getting value from collection to a date picker field

  • Oracle Reports Security Settings???

    I am attempting to display Oracle Reports that are on a report server on a portal.
    I look here and it tells me to set up the report server info on the portal...which makes sense...
    http://www.contratos.gov.co/portalHelp/ohw/state/content/locale.en/vtTopicFile.rpthelp_cs_hs_en%7Crptsvr~htm/navId.3/navSetId._/
    But I go to the administration tab in portal builder, and there is no Oracle Reports Security Settings option. Anyone know why???
    Need info asap...Thanks!

    Please refer to duplicate thread on the same topic at
    error getting value from collection to a date picker field

  • XL Reporter-Security settings in Microsoft Excel prohibit XL Reporter

    Hi
    i am getting the following error when i run the reports in XL Reporter
    XL Reporter-Security settings in Microsoft Excel prohibit XL Reporter from running.
    I have made the following chnages
    1. Start Microsoft Excel.
    2. In the Tools menu, choose Macro->Security...
    This opens the Security window.
    3. Choose the Trusted Sources tab and make sure the Trust all installed add-ins and templates and Trust access to Visual Basic Project checkboxes are selected
    I am still getting the same error.
    Regards
    Farheen

    Hi Rekha,
    In ref. SBO System that you are loggged on to, do you have admistration rights on the local computer.
    Are you trying to open the XL reporter for the first time ?
    Which version of SBO you are working on?
    Regards,
    Rakesh N

  • Oracle ADF Security Login page

    hi.
    I am using oracle ADF 11.1.2.2.0 (oracle Jdevelopr 11g release 2) in my job environment. There are 3000 users working as client level in our company. They have separated user Id and roles. They can change their passwords. There are expiration period for passwords which is handle by in database level. when the employees are going to terminate or retirement , we can control their login status. that mean we change their Active status as a Inactive status. some times we recruit number of emplooyes for cover our business targets. Their User Id also in database table level.
    My main problem is how we can handle number of employees using Oracle ADF security configuration.
    second one is how user can change their passwords.
    Third is how number of employees going to terminate ,handle their Active/Inactive State.
    Fourth one is If we use this Oracle Security system ,project managers or project cordinator or Adminstrator level authenticator must need to deploy time to time war file, because of adding removing users in jazn-data.xml.
    hoping help from you.Thanking for all.

    So, you can define SQLAuthenticator/SQLReadOnlyAuthenticator on Weblogic which will retrieve users from your db table(instead of jazn-data file) to application server.
    Then, in your application you can enable ADF Security and this will generate login page.
    And, this is it :)
    If you need some custom processing before users login to your app, then you can create custom login page and do whatever you want in Java code:
    http://docs.oracle.com/cd/E16162_01/web.1112/e16182/adding_security.htm#BABDEICH
    >
    But 11g has Database connection in Application Resource. Using that connection I need to log to the system using user's User iD and Password
    >
    This connection is valid only in design time. When you deploy your application to application server, then you can include this connection in .ear file, or you can define Data Source on Weblogic(which is better approach).
    To programmatically retreive db connection, you can create utility method in your Application Module.
    Dario

  • Oracle reports and multiple pages

    I am new the Oracle Reports and I am trying to generate a report that can continue to the another page. For instance, if my list of items exceeds the first page of the report, the remaining items will be printed on the next page. We can get it to continue to the next page, but the formatting of the following pages after the first page needs to be different. Currently, it is placing the remaining items in the same position as the first page. The remaining items should be further up the page.
    In short, how do I generate 1 report with 2 different formats. All pages beside the 1st page will be the same.
    Any guidance is appreciated.

    Please post the details of the application release, database version and OS.
    I would like to ask for your help regarding printing from concurrent requests.
    I am currently having an issue with printing multiple pages from Oracle reports, both in text format and RTF/PDF formats.
    When I generate a multiple page report and print it directly from a concurrent request, print outs generate extra space after each page even though page size is indicated in the reports (all of them are in letter size).What if you print the output file from the OS, can you reproduce the issue then?
    Troubleshooting (Printing) [ID 104528.1]
    An Extra Empty Page Is Printed at the End of Requests Output [ID 1011499.7]
    I have already tried editing the printer drivers both the actual driver config file and through the application but the results are still the same.Can you reproduce the issue with other printers?
    This is very important since printing is done on continuous paper and continuous pre-printed forms
    Any ideas would be greatly appreciated.If the issue is urgent, please log a SR.
    Thanks,
    Hussein

  • XL Reporter security settings Excel 2007: com add-in Load Behavior: unloade

    I have followed all the posts regarding the security settings in MS Excel (I'm using 2007), and I still get the error. I believe the problem relates to the com add-in. I have the add-in "available" but always unchecked. When I check it, I see the behavior as "unloaded". close the com add-in window and still get the error. Each time I return to the com add-in area the SAP Business One XL Reporter add-in is unchecked again.
    Has anyone discovered this behavior?

    I discovered a solution. Apparently, Excel had disabled the add-in in a prior attempt to start the add-in. I found out how to reenable the add-in at this microsoft note:
    http://msdn.microsoft.com/en-us/library/ms268871(VS.80).aspx
    That did the trick.
    Alan

  • Calling Oracle Reports from WEB Pages(JSP)

    We are using Weblogic as the web server, Oracle 8i as the database and JSP(Java Server Pages) as the scripting language.
    We need reports to be invoked and displayed to the browser. Is it possible to invoke Oracle Reports 6i reports from JSP WEB pages and display the output to the browser? How can we do this and what are the additional s/w requirements, if any?
    null

    yes it is possible. There is a cgi script called viewreport.cgi. Have the jsp page call it (GET or POST method) and place the user parameters inside the form.

  • Adobe flashplayer settings page is blank

    Hi guys, I have a Samsung android tablet and I used to use adobe flashplayer till a recent upgrade few days ago. After the upgrade I have found that I cannot access pages on preview versions books on Google books. Briefly browsed the net I found that I need Flash for this function.
    I manually downloaded flash player 11.1 from the archives for flash player Web page. Even though flash player is now installed, each time I try to access it, i am directed to an online page - https:// settings.adobe.com/flashplayer/mobile. This page always turns out blank.
    I would be grateful if somebody could direct me as to how to access the settings page
    Regards,
    Rasesh.

    Please read this whole message before doing anything. This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it. The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
     *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem(s)? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Connecting to my linksys security settings page

    I cannot get to my linksys secure web page in order to add a laptop to the network. Keep in mind I have not done this for about three years and my notes do not seem to be working. I am running Windows XP Pro. The linksys is currently connected to a Comcast IP Gateway router, could this be interferring? I ran the ipconfig to get my ip address which is 10.1.10.1 and typed in browser but I can't connect and the default address 192.168.1.1 brings me to a Comcast Gateway Window which I do not have a user ID or PW? Do I need to contact comcast my cable provider? If so are they going to give me a hardtime for using a router to connect other computers to?

    What is the model number of your Linksys router?
    I think the IP address of your router might be changed.
    When you run the ipconfig, you get the IP address 10.1.10.1. What is the default gateway number? The default gateway number will be the IP address of your router. You need to use that number to access the router setup page.

  • Oracle Report security

    Hi Hussein,
    EBS R12
    How do I get the inherent environment variables ( like userid, current responsibility she has chosen in) when a user login to EBS and call the concurrent program?
    I what to add a security feature of my report that if her responsibility is like Payables Manager - CompanyA , she can not access the data of Paybles Manager - CompanyB.
    I heard that it is done in the pre-report triggers where you get all the desired environment varibles for controlling your report.
    Thanks a lot

    Hi,
    Multi-org access control comes into play here, and with R12 there is the new organization parameter on concurrent programs.
    You don't seem to be talking about environment variables (they are at the operating system level) but profile option values - which are initialized in reports when the FND SRWINIT user exit is called in your before report trigger - see the Oracle Applications Developers Guide. You need to add user exits to custom reports per details in the guide.
    Regards,
    Gareth

  • Oracle Reports Components list not available in BI Publisher

    I have configured the Oracle Report Security settings in oracle Business intelligence publisher, Add oracle report, when i try to ADD report in region, it didn't display Oracle Reports Components list. Pl suggest, what should i do
    Regards,

    I had a similar issue in 10.3.3.1.
    Try this:
    http://oraclebizint.wordpress.com/2007/11/06/oracle-bi-publisher-and-bi-ee-invisible-admin-tab/

  • Security settings in Microsoft Excel prohibit XL Reporter from running

    Dear All,
    System throws an Error message as Security settings in Microsoft Excel prohibit XL Reporter from running while Generating XLR Report -
    Please do the neeful
    Thanks & Regards
    Venkatesh N

    Dear Venkatesh,
    You may check:
    XL Reporter Excel security
    XL Reporter-Security settings in Microsoft Excel prohibit XL Reporter
    Thanks,
    Gordon

  • Page reload/refresh after printing Oracle report.

    I have upgraded from version 3.0.1 to version 4.0.1 and I am having an issue.
    I have a page with a tabular form (SQL Query - updateable report) which allows me
    to select items I want to print.
    The report looks like the following:
    Name          Print
    Template 1     Y/N
    Template 2     Y/N
    Template 3     Y/N
    Template 4     Y/N
    The print column is a static LOV with a 'Y' or 'N' option.When I submit the page, a MRU runs and sets a flag for each item I want to print in the database.
    It then branches using "Branch to URL Identified by Item (Use Item Name)". The URL specifies an Oracle report
    server and the oracle report to print.
    All this works fine and the items that were selected, print out. An Oracle Reports Job Status is displayed
    on screen (this originates from the oracle report server) to indicate that it has "successfully run" along with
    an OK button. The OK button contains the following code: javascript:history.back()
    A process also exists on the page ("On Load - Before Regions") that resets any flags that were set in the database
    when the page is loaded and so the report will displays all N's in the Print column.
    Now my problem is that in version 3.0.1 when I hit the OK button it would return to the page in the apex
    application that branched to the oracle report and the page would be reloaded, where as in version 4.0.1
    the page is not reloaded.
    Any ideas how to fix this or can someone suggest a new way of achieving the same result.
    Any help would be appreciated.
    Regards,
    Ryan

    Hi Prabodh,
    I have used Debug mode and I see 2 debug entries added.
    The first is just displaying all the page defaults - (I think the page gets reloaded when you select debug from the developer menu)
    The second is the SUBMIT request and it shows the initial value of the hidden item (ie null) and then where I changed its value (ie Y).
    The problem is, it does not list an entry for the page when it returns from the Report Status page, so I have no way of knowing if anything is
    changing its value. I even changed code to set the item to N instead of null and then to Y on submit. But when I return from the Status page
    the value remains at N, even though if I check the Session State values it will say Y. The only conclusion I can come to is that it is using the
    cached values and effectively just displaying the values set before I submit the page.
    I have been playing around with iFrames and it seems to work the way I want.
    I created a new Page (5), then a HTML region. Within the HTML region i have the following code
    <table>
    <tr>
      <td>
       <iframe src="&P1_URL." width="500" height="300"></iframe>
      </td>
    </tr>
    </table>I also create a button (Return) + branch and on submit will return to page 1.
    From page 1, instead of branching to a URL, I now branch to page 5. This loads the Report Status page into my iFrame and indicates that it was
    successful, but now instead of using the OK button within the status page I use the Return button that is part of the Apex application.
    This way I no longer need the javascript or hidden items to try refresh the page , it will be done automagically once the return button is pressed.
    I know it may not look great but it is the only solution I can get to work at the moment.
    Thanks again for all your help, I really appreciated it.
    Regards,
    Ryan

Maybe you are looking for