Oracle Reports Server CGI - Report Job was cancelled upon user request.

I am running reports on the web through Forms using Run_Report_Object built in. I am using Oracle 9iAS Enterprise Edition Release 1(1.2.2.2.2), Forms 6i Patch 9 (6.0.8.18.3) and Reports 6i Patch 9 (6.0.8.18) using CGI implementation. Most reports are running fine, but I have one that produces 125 pages and we are getting the following messages in the browser:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job was cancelled upon user request.
However if you look at the Reports Server Queue Status thru the browser it shows that the report did finish, but it took 16 minutes. But the user gets the above message in their browser window.
Is there a way to get the first page of the report to display, while the rest of the report finishes, so the browser window doesn't timeout and display the above error?
Any help would be greatly appreciated.

hi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj

Similar Messages

Report Job was cancelled upon user request???

Hi,
My reports take more than 10 minutes to complete, most times I get
"Report Job was cancelled upon user request".
error, how to fix this problem? Is there any time limit inside the report I can set.
Thanks

hi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj

Please help ! "Oracle Reports Server CGI - Reports Server name is not specified."

Hello Gurus,
I have an html form that allows putting in a parameter. Upon
submit the form, it'll pass a string URL with the parameter to a
new browser.
My url: http://localhost/servlet/oracle.reports.rwcgi.RWServlet?
diary&14252
I also used keymap looks like this
diary: report=Diary.rdf server=servername desformat=pdf
destype=cache userid=id/psswd@db myoid=%1 %*
But I get an Error: The requested URL was not found, or cannot
be served at this time. Oracle Reports Server CGI - Reports
Server name is not specified.
However, if I move the cursor to the end of the same url (or put
a space at the end) and hit Enter, then the report is
displayed. I guess there must be something wrong with my
configuration. Please help. I appreciated any inputs from you.
Thanks in advance.
Ashley

I found the solution to my problem. It was nothing to do with
the cgicmd.dat keymap file, but the html form itself. It's
confused between the url arguments and form arguments from the
submit button. So, what I did was open a new window with all
arguments instead of using the submit function.
Regards,
Ashley

Oracle Apps Report error "Oracle Reports Server CGI - The Reports Server Engine terminated abnormally."

Hi ,
I have modified layout of one existing custom report.
I have added 3 columns in the report , Now when I execute the report sometimes it gets executed with the newly added columns and sometimes it errors out with below error.
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - The Reports Server Engine terminated abnormally.
Any pointers in this regards will be appreciated.
Thanks

I found there were some srw.message statement ( used for debugging purpose) were there , when I removed those statements. This error was gone.

Error: Oracle Reports Server CGI

I am reciecing the following error when attempting to run a report from a URL using the RWCGI60 command. Oracle Reports Server CGI - Unable to communicate with the Reports Server. The following is the url I am trying to access. http://hostname/cgi-bin/rwcgi60.exe?report=V2JOURNAL2.rdf+userid=id/password@database+server=REP60_USTRSPOM001+desformat=pdf+destype=cache.
null

hello,
looks like a configuration issue. check you settings in TNSNAMES.ORA
also check your names.default_domain in SQLNET.ORA. if you do not specify a domain it will add the default domain to the servername. i would suggest to always use a name with domain.
regards,
the oracle reports team

After restart Oracle Report Server some reports start automatically to run.

When our report server is restarted always a number of reports are started automatically.
I don't know why these are started automatically?
Is there a avoid starting these reports?

Hello,
If you are storing the jobs on the database then please check:
Using the Reports Server Queue PL/SQL Table and API - RW_SERVER_JOB_QUEUE (Doc ID 72531.1)
otherwise just rename the report server .dat files
1- Go to $ORACLE_HOME/reports/server directory
2- Rename Reports Server dat file.
Unix example :
mv reports_server_name.dat reports_server_name.dat.old
3- Try again to start Reports Server
Possible causes of the issue are:
1.scheduled jobs
or
2.restart of report server while some jobs were waiting in the queue
Regards,
Alex
If someone's answer is correct or helpful please mark it accordingly.
Edited by: AlexDiniasi on 02.08.2012 18:49

Error while Setting Up Oracle Content Server to Send Jobs to Oracle IBR

Hi,
I am trying to configure Oracle Content Server to send jobs to IBR.
I am using following version of UCM:
11gR1-11.1.1.3.0-idcprod1-100505T121221 (Build:7.3.0.180)
Both UCM and IBR are using same WAS domain. Installed on Windows server 2008.
1.I have started both manged servers for UCM and IBR.
2.Then by browsing IBR console http://vpunvfpctnsz-07:16250/ibr/ , i have changed the
Incoming Socket Connection Address Security Filter:
127.0.0.1|0:0:0:0:0:0:0:1|<<my.server.IP.address>>
3.Enabled DAMConverter component on IBR
4.Restarted IBR.
5.Created an outgoing provider on UCM content server as follows:
Provider Name: IBR
Provider Description: Provider for IBR
Provider Type: outgoing
Provider Class: intradoc.provider.SocketOutgoingProvider
Provider Connection: intradoc.provider.SocketOutgoingConnection
Instance Name: VPUNVFPCTN955099yscom16250 << same as IBR server name >>
Server Host Name: vpunvfpctnsz-07
HTTP Server Address:
Server Port: 16250
Relative Web Root: /ibr/
Conversion Options: Handles Inbound Refinery Conversion Jobs
Refinery read-only mode: False
Maximum Jobs to Queue: 1000
It is showing following status:
Connection State: This remains "good" when i click on test and after some time chages to "down".
Connection Error: Unable to communicate with refinery provider IBR; it does not resolve to a valid IBR. Exception type is 'java.lang.Throwable'.
Did i miss any step?
Please suggest.
Thanks and regards,
Minal

Hi
Server Port: 16250
This should be the value of IntradocServerPort for IBR server .
By default it is 5555 .
Replace 16250 with 5555 (if you have not changed it ) .
Save the changes , restart UCM managed server .
Test to see if the error shows up .
Hope it helps .
Thanks
Srinath

SM37 - JOBs was CANCELED

Hello all,
Can someone explain why Job was Canceled...
tx = SM37 - JOBs were CANCELED
Some JOBS were finished ans some were canceled:
name: DELIVERY_APR / user: JHERNANS/ stts: COMPLETED/ date: 06.06.2007/start: 01:00:32/ finished: 07:26:17
name: DELIVERY_JUN / user: JHERNANS/ stts: CANCELED/ date: 06.06.2007/start: 01:00:36 /finished: 01:03:56/
name: DELIVERY_MAR / user: JHERNANS/ status: CANCELED/ date: 06.06.2007/ start: 01:00:32
name: TS MAY NAT/ user: JHERNANS/ status: CANCELED/ date: 06.06.2007/ start: 01:00:36
All JOBS above has just 1 STEP which is:
ABAP program: AQIWGM==========TS============
However each JOB has a different VARIANT(PARAMETER):
job: DELIVERY_APR / parameter: &0000000004820
job: DELIVERY_JUN / parameter: &0000000004885
job: DELIVERY_MAR / parameter: &0000000004801
job: TS MAY NAT / parameter: &0000000004856
ALL CANCELEDS JOBS were canceled because :
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
All CANCELED JOBS has the same at Job Log:
- ABAP/4 processor: DBIF_RSQL_SQL_ERROR/ message class: 00/ message nº: 671/ message type: A
- Job cancelled/ message class: 00/ message nº: 518/ message type: A
Question: What has happened?
Is a time overlapping problem
Or
Can it be a program problem?
In Source Code Extract from the dump message there is:
002400 START-OF-SELECTION.
002410 perform init_texthandling(rsaqexce) using 'CL_TEXT_IDENTIFIER' ' ' 'ZSTE
002420 data: %ret type i.
002430 if sy-batch is initial and %excel is not initial.
002440 perform check_wingui(rsaqsyst) using %ret.
002450 if %ret <> 0.002460         message e842(aq).
002470       endif.
002480     endif.
002490   perform authority_begin(rsaqexce).
002500   perform authority(rsaqexce) using 'LIPS'.
002510   perform authority(rsaqexce) using 'VBUP'.
002520   perform authority(rsaqexce) using 'VBAP'.
002530   perform authority(rsaqexce) using 'LIKP'.
002540   perform authority(rsaqexce) using 'VBAK'.
002550   perform authority(rsaqexce) using 'KNA1'.
002560   perform authority_end(rsaqexce).
+002570   perform %comp_ldesc.
select LIPSLFIMG LIPSLGORT LIPSPOSNR LIPSVBELN LIPSVGBEL LIPSVGPOS
002590          VBUP~WBSTA
002600   into (LIPS-LFIMG , LIPS-LGORT , LIPS-POSNR , LIPS-VBELN , LIPS-VGBEL , L
002610        , VBUP-POSNR , VBUP-VBELN , VBUP-WBSTA )
002620   from ( LIPS
002630          inner join VBUP
002640          on VBUPPOSNR = LIPSPOSNR
002650          and VBUPVBELN = LIPSVBELN )
002660          where LIPS~LFIMG in SP$00020
002670            and LIPS~LGORT in SP$00005
002680            and LIPS~VBELN in SP$00018
002690            and LIPS~VGBEL in SP$00022
002700            and LIPS~WERKS in SP$00017
002710            and VBUP~KOSTA in SP$00014.
002720            and VBUP~WBSTA in SP$00012.
002730     %dbacc = %dbacc 1.+002740     if %dbacc = 0.
002750       stop.
002760     endif.
002770     check SP$00020.
LOOKING MORE the DUMP SCREEN:
Runtime errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Occurred on 06.06.2007 at 01:03:56
An SQL error occurred when accessing a table.
What happened?
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer termination messages, especially those beyond their normal deletion date.
Error analysis
An exception occurred. This exception will be dealt with in more detail below. The exception, assigned to the class 'CX_SY_OPEN_SQL_DB', was not caught, which led to a runtime error. The reason for this exception is:
How to correct the error
Database error text........: "ORA-01114: IO error writing block to file %s (block # %s)" Internal call code "[RSQL/FTCH/LIPS ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"AQIWGM==========TS============" or "AQIWGM==========TS============"
"START-OF-SELECTION"
Thanks a lot,
Barbara

From the dump:
> select LIPSLFIMG LIPSLGORT LIPSPOSNR LIPSVBELN LIPSVGBEL LIPSVGPOS
002590 VBUP~WBSTA
002600 into (LIPS-LFIMG , LIPS-LGORT , LIPS-POSNR , LIPS-VBELN , LIPS-VGBEL , L
002610 , VBUP-POSNR , VBUP-VBELN , VBUP-WBSTA )
The listing seems to be cut off, so I don't know if this is the error or not, but it's something you can check.
Rob

RWServlet (Oracle Reports Server CGI unable to communicate with the reports server)

Running Oracle 6i Reports Server on one NT machine (with the default install) and trying to execute the above servlet, on another system with a java servlet server, I get the above error.
I have added REPORTS60_REPORTS_SERVER to the environment, as well as the registry. Note that on the Servlet Server I have NO other Oracle installations.
So, is RWServlet dependent upon ANYTHING else being installed on the servlet server machine or ANY other environment/registry settings?
Thanks!

You will need to install the reports client as well to get a link to your reports server.
Ken

Oracle DB server and Reports&Forms Services - in separate homes

Hi
I have manaed to installe Oracle DB server (10g) in home1 and reports & forms services (together with Developer suite, 9.0.4) in home2 - can I work normally with that installation/configuration. What is normal practice?

can I work normally with that installation/configurationIt depends on what normally means. If your machine is a test/development one (Developer suite), then I don't see problems. On a production environment it would be better to have separate machines, unless the machine is a big one, with a possibly small number of users. I have a customer with a W2000 production server running both DB and Application server (complete version), but he has 10-15 users and the machine has 2 CPU 3GHz and 5Gb RAM.

Reports Server/running reports on the web.

I am trying to configure my web server to run reports on the web. I have followed the instructions provided by Oracle, but some is not clear. When i try to run report on the browser, i get the following error:
CGI Error
The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are:
Oracle documentaion say the following about the steps to configure the web server:
1-Start your Web server by entering the following:
2-Start your browser.
3-Create a listener.
4-Configure your Web server mapping and note the physical and virtual directories. For example:
I have done all the steps above except creating a listener. The documentation doesnt explain that step at all.
I have created a cgi-bin directory and made it excetable and copied the rwcgi60.exe from reports server machine to the web server machine. I also copied the TNSNAMES entry for the web server from the reports server machine to the web server machine.
Here is the command i use(just trying to make sure that web CGI is responding, but it doesnt work)
http://web_server/scm/cgi-bin/rwcgi60.exe
Other question: On the server machine, i have 3 oracle directories: ORA81, ISUITES, 806, which one should be the home directory for the reports to work on the web??
I am using oracle 8.1.7 with 9iAS release 1.
Thanks

Please note that our CGI servlet is only used as a migration point for
people with legacy CGI. It is not intended to support people with new
development to -- we encourage you to use JSP and servlets.
Thanks,
Michael
Savitha wrote:
>
Thanks Wei,
Savitha
"Wei Guan" <[email protected]> wrote in message
news:8itate$332$[email protected]..
Yes, WebLogic has CGIServlet to handle CGI, refer to document for details.
Cheers - Wei
Savitha <[email protected]> wrote in message
news:8isq8i$ocn$[email protected]..
Does Web logic Support CGI ?
Need to connect the Web Server with the Oracle Reports Server running
on
a
separate machine.
Which is to be referred to as CGI_Virtual Directory?
Thanks ,
Savitha
Thanks,
Michael
-- BEA WebLogic is hiring!
Check our website: http://www.bea.com/

Crystal Report Server XI Report recurring instances do not work. Logs?

I have scheduled a report to be run every morning, and each instance return status is "success". However, I encountered the following problem when I try to view instances of the report: There is a long time period of waiting (seems to be waiting for some kind of timeout), and then eventually the message: "A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server."
I also noticed that in event viewer (windows server 2003) I see many failure audits to login to the sql database, and the events contain the login used in my data source.
It's interesting to note, that when I run a single instance of the report "Now" there is no problem.
Some info about the report which may be relevant:
The report uses 2 formula fields to auto-parameterize 2 of the 5 parameters used by a subreport. The other 3 subreport parameters are set when scheduling the report.
The subreport uses a call into a stored procedure in a MS SQL server 2005 database to retrieve its records.
The 2 fields which are parameterized are datetime fields (StartTime, EndTime), and the main report is basically just a wrapper to only show the previous day.
JDBC data source to local Sql server instance.
Also, the crystal report server XI install uses the same sql server instance to store CMS data under a separate database.
I'm stumped on this.
Has anybody encountered this problem?
Is there a simpler way to auto-parameterize the report?
Why are the failure audits occurring when I view the instance of the report? Is this because the instance is setup to use RPT output format?
Are there logs I can look into aside from event viewer? I can't find anything that looks relevant under program files, but perhaps I missed something.
The failure audits would make more sense to me if it occurred with the other report instances, but some instances are shown correctly, and some just do this timeout thing.

Please post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek

URGENT: 9i report server for reports (9i ver) deployed on Weblogic6.1

Hi,
My company's product is a web-based reporting application running on WebLogic6.1 and Reports6i. I have recommeded using Reports9i due to its vast array of features. In the test environment, I have been able to successfully integrate Reports9i on WebLogic through the Reports9i J2EE Thin Client.
I would like to know that, for production, is it possible to use this same configuration to pass requests to a stand alone oracle9i report server as was the case in 6i. Since we are already using weblogic6.1 in production and cannot migrate the entire application to oracle9ias appserver just for using the reporting functionality.
Thanks,
Bharat

Bharat,
I would suggest you to read the readme which is available with the Oracle9i Reports J2EE Thin Client.
Please note that for testing and development purpose,
your configuration of "Oracle9i Reports J2EE Thin Client for WebLogic used to pass request to a standalone Report9i Server installed through the Oracle9i Developer Suite." is perfectly O.K
However, To use in deployment / production environemnt, you must have a license of Oracle 9i Application server
Please let us know if this is not clear
Thanks
The Oracle Reports Tea

Report Server Vs Reports Engine

Hi,
Could someone explain the difference between report server and a report engine (advantages vs disadvantages)?
What does lifes remaiming means on a reports engine?
On a 100+ user system, which is better, mulitple reports servers or higher reports engine setting?
Thanks
Edited by: 913146 on 08-Feb-2012 02:35

Hi,
About engLife,you can get the details from the below link.:)
You will also get the information of other report server parameters
http://docs.oracle.com/html/A9210201/pbr_tune.htm#1005700_
Difference between report server and a report engine
Report engine is a part of Report server..When ever a report server starts then the report engine gets initialized and gets available at the same time.
If Report server is down,Report Engine also goes down.
which is better mulitple reports servers or higher reports engine setting?
Now consider this example,
If you have set you Max and Min engine to 3,
Now assume,3 users have simultaneously sent request to execute a report.
These 3 request will be handled by 3 engines available in the report server.
Now in between this,if the 4th user tries to execute another report..since all the engines are full,this request will be in the queue and will be executed once any report engine gets free.
Multiple report server will be helpful,As the load gets balanced between different report servers.
Regards
Fabian

Crystal Report Server - Scheduled Reports Have Failed - SMTP_E_TCPSOCKET_SE

Hi,
Recently, several scheduled reports have failed with the error message "server error. CrystalEnterprise.Smtp: SMTP_E_TCPSOCKET_SEND(3)". It happens randomly, to different reports at different times. Can anyone let me know what information does this need to troubleshoot. Thanks!
Senthil

Hi
I would like to suggest you following things:
1) Please check the SMTP settings on the respective report's job server. Like Severname of the SMTP
server. Port number of the SMTP and domain.
2) Check whether are you able to send the mails from mail client to the desired destination.
3) Verify the Port number given to the SMTP, by default it is 25. And also verify it is not blocked on the
firewall.
4) Also verify whether ip address of the server machine where job server is installed is included in the
allowed list at the SMTP server end.
Regards,
Hrishikesh

Oracle Reports Server CGI - Report Job was cancelled upon user request.

Similar Messages

Maybe you are looking for