Oracle Server 8.1.7 on Windows 2000 Dynamic Drives (?)
Does somebody know if Oracle Server ver.8.1.7 works with Dynamic Drives under Windows 2000?
check it:
start
-->program
-->$oracle_home$
-->Database Administration
-->Oracle Administration Assistant for Windows NT
oracle instance 'startup/shutdown options'
Similar Messages
-
Oracle 9i Data Guard supported on Windows 2000 platform ?
Is Oracle 9i Data Guard supported on Windows 2000 platform ?
YES, we are currently using Data guard on 2000 Windows Server. Will need to have the Management server installed in order to get the Data guard function.
-
Weblogic Server 6.1 with MS Windows 2000 Cluster
Hello everybody,
following situation:
We want to implement a Microsoft Cluster (Failover) with MS Cluster Service and
2 nodes (maybe later we try the Weblogic Software clustering with load balancing
as a part of an documentum and infotehna DMS). On both nodes we made the same
test installation of the Weblogic Server 6.1 and started it with services (instead
of cmd-file).
It's working fine seperate on every node, than we started to implement the MSCS
on these machines and only one node is working. On the other node (after a failover
to this node) the service started but break down only a few seconds later.
Now, my question is: Can we use the Weblogic Server 6.1 in an Windows 2000 Advanced
Server Failover Cluster with 2 nodes? Or do we need a special Add-on to do this???
Best regards,
RonnyRonny,
I'm don't know the specifics of MS Cluster Service but given that it works like
other common HA frameworks (assumption on my part) you may need to use the MS
cluster framework in isolation from the 'software-based' clustering approach that
WLS 6.x currently provides. For example, in other HA Frameworks there is typically
a heartbeat mechanism that informs the framework that a node is dead and the framework
in turn calls scripts that migrate the failed node 'applications' over to the
healthy node. In WLS, you could mimic the same approach where a single admin
server fails over to a backup server not using the WLS 'software' admin/mgd server
cluster value-add. In others words, you would need to script a heartbeat mechanism
for the single WLS server and also script failover to a backup node when the heartbeat
indicates 'failure'. This technique would be used in isolation (not using the
current WLS software-based cluster configuration).
My 2 cents,
Chuck Nelson
DRE
BEA Technical Support -
How to prevent from starting oracle server every time i start windows?
I have winXP professinonal, and i would like to know how to prevent from starting oracle server every time i start windows. Because it really slows starting the windows. Thanks
The scripts above seems to work as intended with no errors and do indeed stop my five XE services. I created the second script to start them and they do indeed start and are listed as "Started" in the Services panel aferwards.
My XE installation has the 5 services set up to start automatically.
I was happy to find the script above because I did not know the starting order and using the XE shortcuts for "Stop Database" and "Start Database" just seemed to cause sqlplus to receive ORA-12514 "listener does not currently know of service..." after trying to use them to restart the database. Using the scripts above seems to leave me with a different error.
I am pretty sure I eliminated my 9i listener and it is no longer listed in my Services panel or the registry.
Restarting the laptop does start the services correctly, and now I am on to a more pressing JDBC error, so if I get a chance to use the script again, I will post my results. Thanks. -
Oracle 8i 8.1.7 on Windows 2000 Server
After I install Oracle 8.1.7 on Windows 2000 Professional, Everything is Good, database and Enterprise Manager Server startup normal.
But when I install Oracle 8.1.7 on Windows 2000 Server, the Oracle Service startup normal , but the database instance can not startup automatical, I must startup the database instance manual using svrmgrl program and the Enterprise Manager Server can not startup ?check it:
start
-->program
-->$oracle_home$
-->Database Administration
-->Oracle Administration Assistant for Windows NT
oracle instance 'startup/shutdown options' -
Oracle 8.1.7 Server Installation on a P4 Windows 2000 Server
I am trying to Install Enterprise Oracle 8.1.7 on a P4 Windows 2000 Server Machine. I had a solution regarding the P4 bug, which asked the latest Service Pack for Win 2000 to be installed, the Oracle CD dump copied to hard disk and symcjit.dll to be renamed. This enabled me to start the Installation Process. I chose the Administrator option during installation.
However I noted that only Oracle Client is Loaded and NOT Server. I do not get any options to install Server. I only have 1 CD for Enterprise Oracle 8.1.7 which should have both Server Programs and Client Programs to Install I believe!
Any help would be appreciated!!!
ThanksDear Nandakumar Ananthanarayan,
I read your posting and I seem to have a similar problem.
I am trying to install Oracle8i ver 8.1.7 on WINDOWS 2000
SERVER with service pack 3 on an Intel Xeon Processor at 2.4GHz.
Raid 5 is used on 3x36GB Hard Drives.
When the Oracle8i CD is inserted the initial screen comes up.
From this I choose "Install/Deinstall Products".
After this nothing at all happens.
The initial screen closes and the system is as it was.
I would be obliged if you could help me out.
Yours Sincerely,
Chris. -
Oracle App Server 9.0.2 with Windows 2000 Svc Pack 4
Has anyone had any luck installing the Windows 2000 Service Pack 4 with the Oracle Application Server 9.0.2.0.0?
Enterprise Manager doesnt start and we are unable to start the other components?
Thanks
SllionI install 9ias 9.0.2 successfully on dell 8450, but cann't start portal instance and wireless instance.
-
URGENT!Stuck while installing the Oracle apps 11.5.8 on Windows 2000 Server
Hi All,
I am installing the Oracle applications 11.5.8 on windows server 2000 using the rapid install 11.5.8.11(which was part of the cd pack).
I am using the Windows CD Pack(which consists of 19 cds)
To start with, it has passed all the pre install checks(including the utlity check, system check etc), every thing was succesful and then I started the installation.
And then I started installing, I inserted 1 cd at a time. Every thing went smoothly until the 5 cd. While processing the 5th CD, it started spawning the dos session and was trying to connect to the created database. And it was not able to do so.
I could see from the status bar that it was trying to run the scripts like adlicnse.sql, adclobtmp.sql ,adclobconv.sql
and throwing the following message
ora-01089: immediate shutdown in progress
and was asking me to enter the user name . When I entered the username and password, it throws the message saying that
"ora-01089: immediate shutdown in progress".
After such unsuccesful attempts for each of the above mentioned file, I finally go the "Oracle Applications Rapid Install Wizard Alert"
displaying the below message.
Error code received when running external process.
Check log file for details.
Running Database Install Driver for PROD instance.
and then with the "Retry" and "Abort" buttons. When I pressed the retry button,still get the same message. (And I did not find any log file to look for).
Please let us know what are we supposed to do now and what is the exact reason why it is not able to connect to the database.
I have not tampered with any of the files. This is a urgent requirement for us to install the oracle apps, please help us immediately and any help is widely appreciated.
Thanks.your problem is not very unusual... I also faced the similar situation cpl of times when Oracle was not able to continue the installation coz the Immediate Shutdown was failed. Actually During the installation, Oracle mounts/opens the database and shuts it down many times and few times, Oracle is unable to shutdown cleanly as some process is hanging or not responding.
Piece of advise is that always use staging area to install Apps as it takes long time on Win2K (anything between 4-12 hrs) to install it and CDROM Access is lot slower than HDD. Also, it will prompt u every time to insert tbe CD. All this hassle can be bypassed by using the staging area. Read the Installation help document on how to create it.
For failure reasons, look in ur installation log file which is created in the default Temp folder usually C:\documents and settings\USERNAME\local settings\temp for WinXP or C:\winnt\documents and settings\USERNAME\local settings\temp for Win2K.
post or email me at [email protected] or [email protected] for further help/details. -
Is Oracle 10g Express Edition compatible with Windows 2000 advanced Server
I have installed Oracel 10g Express Edition on windows 2000 advanced Server, but it is not working properly, but when i installed it on Windows 2000 Professional, then it is working properly, Does anybody know why this is happening. If anybody know why this is happening, please tell me and also tell me how can i install Oracle10g xe in Windows 2000 advanced server.
There should be no issues. A few possible reasons you are running into problems:
- installation using a domain administrator (it works best using a local admin);
- firewalls or anti-virus software or other port blocking mechanisms;
- DHCP resets;
However, unless you tell us exactly the symptoms we are only guessing.
My car didn't start this morning, but my wife's car did. Can you call me why based on this information? -
Error starting the Application Server and Deployment Tool in Windows 2000
After installing the iPlanet Aplication Server with sp3 in Windows 2000 I
get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!Okay, pls check that you are logged in as administrator and installed and now you are logged in as administrator and registering the iAS server. Did you get any installation failures while installing and are you able to register the server using iASAT ?
-
Oracle 8i EE Install problems on Windows 2000
Problem 1 - LENGTH OF INSTALL FILES PATH.
The Oracle Universal Installer was coming up fine, but the "Next" button wouldn't do anything. After much trial and error, I discovered this to be related to the path of the install files. Rather than burning to CD, I had copied the install files into a directory C:\ORA816 - when I renamed this directory to just C:\O, the "Next" magically began working. This problem only occurs on Windows 2000, not NT4.
Problem 2 - CREDENTIAL RETRIEVAL FAILED.
I got this error (ORA-12638) from the Database Configuration Assistant. This just happened, so I haven't had a chance to figure it out. Has anyone encountered/fixed this problem in Windows 2000? I am running the install as Administrator.
nullRe: Problem 2. Just found out that this problem is resolved by removing the line SQLNET.AUTHENTICATION_SERVICES from
%ORACLE_HOME%\network\admin\sqlnet.ora
(see: http://technet.oracle.com//tech/migration/workbench/htdocs/relnotes.htm) -
I have created an application using LabWindows/CVI on my computer. I would like to install this application on a Windows 2000 machine but I receive a message saying something like "This program requires Windows XP service pack 2".
What can I do to make this work.
I am using LabWindows/CVI version 2010.
Any Ideas?OK, Thanks, I will try that.
Regards
// Mikael -
Installation Error with iPlanet Directory Server 5.1 SP1 and Windows 2000
Hello,
I'm having real trouble getting iPlanet Directory Server installed on a Windows 200 Server machine. Every time I install it, no matter what options I choose, I get this series of popup boxes at the end:
- Setup is unable to store configuration data in the LDAP directory
- Unable to create Administration Server configuration
- Could not authenticate ldap connection, "Unknown error"
- Unable to set ACI in Configuration Directory Server
But searching on this forum, I have found a lot of post. I have tested the different solution proposed :
* Add on the host file the short name and the long name of my machine with it's IP adress
* When the installation process crash, uninstall the software, reboot the machine and then restart the installation
With all this solution, the problem is always here.
Could you help me ?
Boris MANCHETTEAre you using Terminal Services. iPlanet DS will not install properly over Terminal Services. You have to install from the direct attached console.
Ted -
To recover DBA password of Oracle 9.2.0.1 on Windows 2000
Hi,
I have forgot the the passwords of DBA Id's ( sys & system ) .Do you know anyway to recover this password . I am logging in with the id with which I installed oracle and all..
with thanks and regards
Ranjeesh K RHi,
The outputs are attched
<<<<<<<<<<<<<<
Z:\>sqlplus / as sysdba
Usage: SQLPLUS [ [<option>] [<logon>] [<start>] ]
where <option> ::= -H | -V | [ [-L] [-M <o>] [-R <n>] [-S] ]
<logon> ::= <username>[<password>][@<connect_string>] | / | /NOLOG
<start> ::= @<URI>|<filename>[.<ext>] [<parameter> ...]
"-H" displays the SQL*Plus version banner and usage syntax
"-V" displays the SQL*Plus version banner
"-L" attempts log on just once
"-M <o>" uses HTML markup options <o>
"-R <n>" uses restricted mode <n>
"-S" uses silent mode
Z:\>sqlplus/nolog
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Jul 23 15:10:48 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> show user
USER is ""
SQL> Alter user sys identifed by 'test';
SP2-0640: Not connected
SQL>
SQL>
SQL> alter user sys identifed by 'test';
SP2-0640: Not connected
SQL> connect / as sysdba
ERROR:
ORA-01031: insufficient privileges
Tried this too
E:\oracle\ora90\bin>orapwd file="E:\oracle\ora90\bin\pwd.txt" password="sys123"
E:\oracle\ora90\bin>
Z:\>sqlplus sys/sys123
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Jul 23 15:32:06 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01017: invalid username/password; logon denied
Enter user-name: sys as sysdba
Enter password:
ERROR:
ORA-01017: invalid username/password; logon denied
Enter user-name:
ERROR:
ORA-01017: invalid username/password; logon denied
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
Z:\>
Any thoughts ? -
Can I install Oracle 8.1.5 on Windows 2000 server or Windows 2000 professional
Hi,
Can I install Oracle 8.1.5 on a Windows 2000 server or Windows 2000 professional server?
Regards,
ZurvaanYes, of course. Both versions works but you have to be prepared for lots of RAM.
Maybe you are looking for
-
To restrict a object to a particular Group at the Universe level
Hi, I have a object which should be restricted only to a particular group at the universe level.So when i define the universe we have to have explicit security that will restrict access to this object information from reports and from ad-hoc queries.
-
Oracle 11g Migration performance issue
Hello, There a performance issue with Migration from Oracle 10g(10.2.0.5) to Oracle 11g(11.2.0.2). Its very simple statement hanging for more than a day and later found that query plan is very very bad. Example of the query is given below: INSERT INT
-
Firefox automatically updated when I turned computer on - 9 Sept - but repeated attempts to start M'soft Outlook resulted in calendar screen showing for a second then Outlook crashed. Eudora email client crashed when attempting to send emails. Tried
-
How to delete Pages in a Sheet?
How to delete Pages in a Sheet?
-
Tree.leafIcon for leafIcon. How about non-leaf Icon?
Tree.leafIcon for leafIcon. How about non-leaf Icon? Where can find it, the non-leaf icon (folder -- look) to be used for some other place?