Oracle Service Bus Installation

Greetings.
We are migrating an Oracle Service Bus infrastructure to a new Hardware Infrastructure in a High Availability environment with two nodes, in the current environment there is one node.
There isn't a hardware load balancer in the new infrastructure, I am thinking in use Oracle WebCache 11g in order to use it as load balancer. But I have some concerns because there isn't any document regarded to use WebCache in front to Oracle Service Bus.
What is the best deployment recomendation to install Oracle Service Bus in a High Availability envirnonment without using a Hardware Load Balancer?
The current Oracle Service Bus projects are writing some messages in some jms queues that uses a FileStore as persitent store. Is there any recommendation to set the JMS Queues in a High Availability environment?
Thanks in advance!
Ramiro Ortíz.

Hi,
OSB is not certified on Windows 7 according to certification matrix...
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It maybe possible to get it running with some workarounds...
Have you seen this thread?
Installation - OSB in 64bit windows 7
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Similar Messages

Issue with Oracle service bus installation on Windows 7 64 bit machine

Hi,
I am trying to install Oracle service bus 11.1.1.4 in Windows 7 64 bit machine for which i have downloaded the generic installers of both weblogic server and Oracle service bus. As per the instructions -
1. Install JDK 1.6
2. Install Weblogic server
3.Install Eclipse separately (In my case Galileo 11.1.1.5 64 bit) - Just unzip the contents in the home directory where weblogic server is installed
4. Install OSB
I have installed all the above 1,2,3 in the same folder as per the instructions. But when i try to install OSB which asks for eclipse home location. But when i give the eclipse home location, it gives an error ""Home location is invalid" and i am unable to proceed with the installation.
I have tried this with OSB 11.1.1.5 as well and have the same issue.
Does anyone has any links which provides the steps to install OSB in Windows 7 64 bit machines or if someone can help me to resolve the above issue ?
I really appreciate any information on this as it is urgent.
Thanks

I have installed OEPE 11.1.1.6.1 now in the same middleware home as weblogic server but when i try to install OSB 11.1.1.4 in the same middleware home, it asks for OEPE home location. Even though i provide the OEPE home location , it displays as "invalid oepe home location".
I have been struggling to get this sorted out so that i can carry out IDE development in OSB 11.1.1.4
Below are the paths where sfotware are installed -
JDK - C:\Oracle\Middleware\Java\jdk1.6.0_21
Weblogic server - C:\Oracle\Middleware\wlserver_10.3
OEPE - C:\Oracle\Middleware\oepe-galileo-all-in-one-11.1.1.6.0.201007221355-win32-x86_64
Thanks

Oracle Service Bus Installation on Windows 64bit Professional

Its 28th July 2012, I have been unable to get the OSB platfomt running on my new Windows 7 Laptop. Keep getting the "The selected wizard could not be started.
Plug-in "com.bea.alsb.ui" was unable to instantiate class "com.bea.alsb.ui.wizards.NewALSBContainerWizard. com/bea/alsb/core/containers/exceptions/ContainerException" error while attempting to create a new OSB project from my Eclipse Helios. I have installed OSB 11.1.14, OEPE 11.1.1.6.1 and wls1036_generic but I haven't been able to get the IDE working!
Can anyone tell me the right combination of OSB, OEPE and wls generic installer that really works!........ I would pretty much appreciate and advice that works!..Thanks!

Hi,
OSB is not certified on Windows 7 according to certification matrix...
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It maybe possible to get it running with some workarounds...
Have you seen this thread?
Installation - OSB in 64bit windows 7
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

How do I install Oracle Service Bus?

Much thanks to anyone who can help! I have been a developer for 20 years and I have never had so much trouble with run a setup program.
I am trying to install Oracle Service Bus 11g on a Windows 7 machine. I have successfully installed WebLogic 10.3. The Oracle Service Bus installation program wants me to enter the paths for Oracle Middleware Home, Oracle Home Directory, Weblogic Server Location and OEPE Location. No matter what I enter for these I am told they are incorrect. For example:
Specified Weblogic home location is not a valid location.
Let's concentrate on just the Weblogic home location. I have tried every directory and sub-directory where Weblogic has been installed. No matter what path I enter, I get the error message above.
Setup defaults this path location to C:\bea_default\wlserver_10.3 so I tried copying everything to this path. Still I am told the location is not a valid location. How does anyone ever get this to work? What am I doing wrong?

Hi.
I have exactly the same problem than 786801. In the "Specify Installation Location" screen of the Oracle Service Bus installation process, after providing the correct paths, the message "INST-07248: Specified Weblogic home location is not a valid location" appears.
WebLogic Server 10.3.3 is installed in /opt/oracle/middleware
The folder wlserver_10.3 exists under that path, so I'm entering /opt/oracle/middleware/wlserver_10.3 as WebLogic Server Location.
In addition to the WebLogic Server, I have installed SOA Suite 11g without problems. The database schemas for that products have been created with the Repository Creation Utility.
I don't know what to do. Any help would be so much appreciated.
Here are some lines of the installation log, where the problem appears:
==============
[2010-10-22T12:44:20.148+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Setting valueOf(WL_HOME) to:/opt/oracle/middleware/wlserver_10.3. Value obtained from:USER
[2010-10-22T12:44:20.148+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Setting valueOf(WL_HOME) to:/opt/oracle/middleware/wlserver_10.3. Value obtained from:USER
[2010-10-22T12:44:20.148+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Inputs passed to the handler: [ WL_HOME ( homeLocation ) = "/opt/oracle/middleware/wlserver_10.3" ]
[2010-10-22T12:44:20.150+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Handler launch begin: weblogicQueries.isValidWeblogicHome
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Entering method executeHandler
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Fetching the value of homeLocation
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Error:Error in validating Weblogic home location
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Cause:Specified Weblogic home location is not a valid location
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Action:Enter a valid Weblogic home location
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Exiting method executeHandler
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Handler launch end: weblogicQueries.isValidWeblogicHome
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Handler returned status: FAILED
==============
It doesn't give much info, just that the path is invalid and the error type.
Any idea?
Thanks in advance.

Installation of Oracle Service Bus 11g

Hi guys,
I have installed weblogic 11g (10.3.6) and Oracle Enterprise Pack for Eclipse 11.1.1.8 using the file oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32.
Now I was trying to install the Oracle Service Bus 11g 11.1.1.7 and it says:
INST-11502: OEPE version isn't the correct OEPE for this version of OSB. Expected 1.8, found 2.1.1
Enter a valid OEPE home location
I wasn't expecting this compatibility error. I search My Support on I I Doc ID 1944102.1 and it points to http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/oepe-11118-521475.html which seems to be the oepe 11.1.1.8 (the one I have).
Can you help on this compatibility issue please?
thanks in advance.
Regards

Now I cannot run eclipse...
My suggest is because the JVM is 32-bit and this eclipse is for 64bit. If I try to run the other eclipse (the one that came with the 32bit installation), I can open it, but cannot create any osb configuration project.
Error opening eclipse:
Error creating an osb configuration project:
Any suggestions?
Thanks!

How to get Oracle Service Bus 10gR3 for windows 64 bit

Hi,
I'm looking for Oracle Service Bus 10gR3 and Oracle Data Service Integrator 10gR3 installables for Windows 64-bit. However, I saw the available versions on download section are only for indows 32-bit. I'm using win 64-bit to detect 4BG RAM or more which is not possible in win 32-bit.
Can anybody help me wheather compatable version are available or is there any solution for that?
Thanks in advance,
Ganesh

Hi Ow;
Please check:
Step-By-Step Install of RAC with OCFS on Windows 2003 [ID 178882.1]
WIN: Does Oracle Cluster File System (OCFS) Support Access from Mapped Drives? [ID 225550.1]
How To Check The Certification Matrix for Real Application Clusters [ID 184875.1]
Regard
Helios

Oracle Service Bus 10.3.1 proxy consuming jms (AQJMS)

Hi,
I need to use AQJMS with Oracle Service Bus proxy.
We have an installation with WLS 10.3 and OSB 10.3.1 and another with WLS 10.3.1 where I defined a JMS Foreign Server like appears in the documentation http://download.oracle.com/docs/cd/E12839_01/web.1111/e13738/aq_jms.htm#JMSAD565.
I need support to how to define the URI at the OSB configuration.. jms://server:port/XAQueueConnectionFactory/QueueName... because I tried a lot of ways and can't make it work.
Thank You in Advance...
Juan Pablo

Hi,
Because I want to use the jms protocol... because if I change AQJMS with another JMS Provider the only thing that I must change in OSB is jms://server:port/CF/Q
In SOA Suite 10.1.3.x I use JMS Adapter for this...
Thank You.
JP

Oracle Service Bus 10gR3 - Failed to obtain WLS Edit lock

My question is, how do I release this lock?
The gory details follow ...
Oracle Service Bus 10gR3 on Windows 2003 Enterprise.
I am following Tutorial 1. (Sheesh, I can't even get that right!)
Around page 3-28 - "To test the Routing of the Loan Application ManagerLoanReviewService".
Point 1 says to start the server. Without thinking, I did just that.
The problem is, it was already running, otherwise, I would not have been using the sbconsole to do the editing.
Of course, it detected it was already running and didn't start again.
Problem is, after the server shuts down, the command files shutdown PointBase.
So, after a mistaken startup, I ended up with a server with no database underneath it.
Fine, I restarted it.
Now, using the activate session ("sbconsole/sbconsole.portal?_nfpb=true&_windowLabel=ViewChangesPortlet&ViewChangesPortlet_actionOverride=%2Fchangemgmt%2FSessionActivate&_pageLabel=ChangeManagement&ViewChangesPortletactivate=activate")
I cannot activate my session, as it says the following :-
Failed to obtain WLS Edit lock; it is currently held by user weblogic. This indicates that you have either started a WLS change and forgotten to activate it, or another user is performing WLS changes which have yet to be activated. The WLS Edit lock can be released by logging into WLS console and either releasing the lock or activating the pending WLS changes.
I show outstanding sesssions, there is only one.
I switch to that session.
I still cannot activate this session.
I have tried re-starting the AdminServer.
It talks about releasing the lock in the WLS Admin console. Where? How?
Thanks in advance.
...Lyall
PS. I gave up on this and simply blew the whole lot away and started again (returned to post installation and re-started the entire tutorial). However, it would be useful to know how to fix this properly, if ever I end up in the same scenario again.

Although the Undo all changes might work in some cases, it could be the case that some files still remain and are even the AdminServer could not be started.
The lock files are usually located in the domain directories.
For example
Domain demo:
$BEA_HOME/user_projects/domains/demo/edit.lok or $BEA_HOME/user_projects/domains/demo/weblogic_eval.lck
--olaf

Oracle Service Bus (OSB) 10.3.1, now available

See:
http://www.oracle.com/technology/software/products/osb/index.html
A new version of the Oracle Service Bus (OSB 10.3.1) is now available, quick list of new OSB features:
* JCA Transport with certified JCA adapters
* Support for generating config.jar from command line or ant task.
* Enhancements to native MQ Series Transport.
* New APIs to support the SOA Management Pack for OSB.
Marc
http://orasoa.blogspot.com

Hi
I have wls 10.3.1 installed on my local machine. I installed it as part of configuring FMW 11g. I am trying to add
OSB component to it by running : osb1031_wls103_win32.exe.
But I am receiving the following error message:
The product maintenance level of the current installer ( wls 10.3.0.0) is not compatible with the maintenace
level of the product installed on your system (wls 10.3.1.0). Please obtain a compatibile installer or perform
maintenance on your current system to achieve the desired level.
So my guess from the above message is that "osb1031_wls103_win32.exe" is for wls 10.3 and not for wls 10.3.1.
Where can I get the OSB installer for wls 10.3.1? or how can I fix the above error?

Cant find Oracle Service Bus samples

I downloaded and installed Oracle Service Bus 11.1.1.5, but when looking for examples, always documentation refers to this folder: "OSB_ORACLE_HOME/samples/servicebus/". I did a search on whole directory for the folder "servicebus", with no luck. Maybe a bad installation, or a missing feature of the domain?

Hi,
You can download the tutorial, which provides the links for the samples at: http://java.net/downloads/oraclesoasuite11g/OSB/osb_examples_tutorials_111140_and_later.pdf
Regards,
Fabio Douek

Workshop IDE for Oracle Service Bus

Hi,
I have installed Oracle WebLogic Server 11gR1 (10.3.3) + Coherence - Package Installer (downloaded from http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html). And I downloaded oepe from net for using it as IDE for Oracle service bus. But when i open the eclipse, i do not get any option for creating the oracle service project.
Is there any plugin i need to put in eclipse for this to show up ??
John

You need to download Oracle Service BUs from here : This installer contains only OSB components and is not bundled with WLS and I think includes the eclipse plugins for Service bus projects.
http://www.oracle.com/technology/software/products/osb/index.html
There is a pre-requisite to download and install weblogic 10.3.3 + coherence +OEPE separately.

Where download Oracle Service Bus 10gR3?

could someone tell me please where I can download Oracle Service Bus 10gR3? the file name should be osb103_wls103_win32.exe
I just installed:
SOA Suite 10.1.3.1
SOA Suite Patch to take SOA Suite to 10.1.3.5 revision level
Business Activity Monitoring 10.1.3.3
SOA Suite Patch to take BAM to 10.1.3.5 revision level
Oracle JDeveloper 10.1.3.4
missing only Oracle Service Bus 10gR3 for complete my environment
Thanks

the file name should be osb103_wls103_win32.exeWhy do you want to use older version of OSB in 10g series (latest version in 10g series is 10.3.1)? Any special requirement?
You may get the installer of older versions from oracle support (http://metalink.oracle.com/) or from http://edelivery.oracle.com/
Regards,
Anuj

Is SOA Suite replacement for Oracle Service Bus 10gR3 (10.3.1.0) ?

I am confused if i have SOA Suite do I need Oracle Service Bus 10gR3 (10.3.1.0) for my ESB ?

Right now there are eclipse plug-ins for OSB. In a default OSB installation you should have workshop installed with the OSB plug-ins.
For the next release, OSB 11g, JDeveloper will incorporate these features.

How to log the exception using Log action in Oracle Service Bus

Hi,
Whenever an exception is raised how to log the exception using Log action in oracle service bus.After logging where I have to find the logged message.

It would be in the log file for the managed server which ran the request. If you are logging the message at a lower level than your app server, however, you won't see it. You should be logging the exception at Error level.

Oracle OSB 11G. Unable to find Oracle Service Bus Configuration Page.

Hi All,
Sorry for the apparent silly question but I am studying and learning the product.
I have the OSB 11G installed and running with a proxy service working and routing requests. The Oracle ESB documentation http://download.oracle.com/docs/cd/E21764_01/doc.1111/e15866/ui_ref.htm#i1327746 at chapter 4.4.2 New Oracle Service Bus Configuration Project Wizard
Use this wizard to create an Oracle Service Bus configuration project. For configuration options, see Section 4.4.3, "Oracle Service Bus Configuration Page."
4.4.3 Oracle Service Bus Configuration Page.
I don't see the configuration page in anywhere in the left pane of the console. Am I missing something? The project creation works fine but I just don't see the configuration Wizard.
Thanks.
Regards
Salvatore Ilardo

The link which you are referring is for user interface objects in the Oracle Service Bus plug-ins and OSB plug-ins are used with OEPE (Oracle Enterprise Pack for Ecplise) for OSB development. OEPE is the only supported IDE for OSB development as of now.
Remember, at a time, one and only one Oracle Service Bus Configuration project can be deployed in a OSB domain which may contain desired number of Oracle Service Bus Projects and that's why there is no provision of creating Oracle Service Bus Configuration Project in sbconsole GUI. In IDE, you may create many Oracle Service Bus Configuration Project and that's why it has a Oracle Service Bus Configuration Project Wizard.
Regards,
Anuj

Oracle Service Bus Installation

Similar Messages

Maybe you are looking for