Oracle Tuxedo 8.1 With Oracle 11g Database

Hi,
I have an old application that must be compiled with oracle 8.1 and Oracle9i Database.
We are migrating to Oracle 11g Database, and now we have some inssues to compile with Oracle 11g Database. For example some Libraries that the Tuxedo XA Resource Manager needs from the Oracle Database, that just u can found on older versions like Oracle9i (kpudfo.o file).
what can be the solution for that problem?
An Oracle 11g database config or a Tuxedo config ?

Hi,
When you say "Tuxedo XA Resource Manager" I'm not sure what you are referring to. Do you mean the Tuxedo transaction management servers (TMS) servers that are built with the buildtms command? If so, if there are linking errors, it has to do with either your library paths or the RM definition for Oracle Database in the $TUXDIR/udataobj/RM file. Tuxedo itself only uses the XA switch from the resource manager such as Oracle database. Now the resource manager may require a bunch of libraries, which is why I suggested you check your library path. If the above doesn't help, can you post the error you are getting and what is generating/creating the error?
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Similar Messages

Is practising on Oracle OLAP features free with Oracle 11g EE?

Hi,
Is practising on Oracle OLAP features free with Oracle 11g EE??
Information found in Internet:
- Oracle Corporation markets the Oracle Database OLAP Option as an extra-cost option to supplement the "Enterprise Edition" of its database.
- Oracle Database OLAP is there pre-installed along with the rest of Oracle Database EE. You just need to license it for use on the DB Machine when you choose to use it.
- Oracle OLAP is a world class multidimensional analytic engine embedded in Oracle Database 11g.
Please confirm if I can try some OLAP features in my office where I have Oracle 11g EE installed as I have been asked to do an initial POC?
Regards,
Sudhir

Hi there,
I believe that the OLAP license falls under the developer license on OTN - http://www.oracle.com/technetwork/testcontent/standard-license-088383.html
You should contact your local Oracle sales rep if you are still unsure
Thanks,
Stuart Bunby
OLAP Blog: http://oracleOLAP.blogspot.com
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

I am trying to connect oracle develper suit form with oracle 10g database

i am trying to connect oracle develper suit form with oracle 10g database
but when i pass username and password
this message apperars
ORA-12560:TNS:protocol adapter error
every time even i try to connect Report or Designer each time same problem
making no connection .
can any body help can help me to reslove this prblem
Arshad khan

Duplicate thread:
Re: connection problem

Oracle Workflow 2.6 with Oracle 8.1.7 for linux

Is Oracle Workflow Server 2.6 available for Linux as a
standalone product against an Oracle 8.1.7 database?
Oracle Workflow does not seem to be included in the Integration
Server option with the 8.1.7 installation.
I've only found the Oracle Workflow Server included with the 9i
database. Will this work with 8.1.7 as well or does it require
9i db?
Thanks in advance for your help,
Josi Antonio

Is Oracle Workflow Server 2.6 available for Linux as a
standalone product against an Oracle 8.1.7 database?
Oracle Workflow does not seem to be included in the Integration
Server option with the 8.1.7 installation.
I've only found the Oracle Workflow Server included with the 9i
database. Will this work with 8.1.7 as well or does it require
9i db?
Thanks in advance for your help,
Josi Antonio

Integrating Oracle Fusion Sales Cloud with Oracle Business Intelligence Cloud Service (BICS)

Ever wondered how to integrate Oracle Fusion Sales Cloud with Business Intelligence Cloud Service (BICS) ?
The blog outlines how to programmatically load Sales Cloud data into BICS, making it readily available to model and display on BICS dashboards.
http://www.ateam-oracle.com/integrating-oracle-fusion-sales-cloud-with-oracle-business-intelligence-cloud-service-bics/

I wouldn't try installing Oracle VM itself on an EC2 instance, as EC2 is essentially Xen itself. Rather, you should just be able to transport existing Oracle VM images to the EC2 cloud. I think this is what you mean, but your opening paragraph is slightly ambiguous. :)
From a VPN perspective, I'd use OpenVPN as it has clients for all major operating systems (Windows, MacOS X, Linux) that are fairly easy to package and install. Packages for OpenVPN exist in EPEL so it's easy to install on OEL5. You could also consider using a firewall instead of a VPN and only allowing connectivity from specific IP addresses/ranges. This has the benefit of not requiring client software, but it does require a fixed IP address/range on the client-side.

Oracle 10 drivers compatibility with Oracle 11g database server

Can someone tell me what is the impact using Oracle 10g drivers for 11g database? is there any differences using the ojdbc14.jar instead of ojdbc5.jar?

To find an article, go to My Oracle Supprt (formerly metalink) metalink.oracle.com and login. Then search for the article ID (doc no).
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(bmDocTitle=Starting%20With%20Oracle%20JDBC%20Drivers&from=BOOKMARK&viewingMode=1143&bmDocType=FAQ&bmDocDsrc=KB&bmDocID=401934.1))
Somehow it's not easy to paste the URL to the new flashy documents!

Oracle Applications Release 11i with Oracle Database 10g Release 2 (10.2.0)

Hi,
I am upgrading our Oracle EBS 11i database to Oracle 10g R2 as per note:362203.1.
In section After the Database Upgrade --> 5. Implement and run AutoConfig we need to refer to Note:165195.1.(Section 8: Migrating to AutoConfig on the Database Tier).
Since I dont have the DB enviornement file, I created one by copying the envioroment file from Oracle 9i Home and replaced 9.2.0 with 10.2.0. I also created Apache directory under Oracle 10g Home and copied perl directory from Oracle 9i Home/Apache to Oracle 10g Home/Apache. This way I got the DB enviornement file for Oracle 10g Home.
Then I used the following command to create the DB Context File:
perl adbldxml.pl tier=db appsuser=apps
Then executed autoconfig using:
adconfig.cmd contextfile=<Full path to the CONTEXT>
Is this the way I should do? Its working ok but I am not sure if my method is ok.
Plz suggest if some other method is there.
Thanks.
Thiru

This is a way I used to do it too. I am not sure whether it is the official way, but it works nevertheless.
Do make sure you run autoconfig afterwards, which will create a new environment file for you. Then stop listener and database, source the new environment file and restart listener and database.
I found some other procedure in order for you to recreate the environment file:
1. On the application tier, Execute $AD_TOP/bin/admkappsutil.pl to generate appsutil.zip for the database tier.
2. Copy this appsutil.zip to the database tier and unzip it into the ORACLE_HOME
3. Set the following environment variables:
ORACLE_HOME =<10g ORACLE_HOME>
LD_LIBRARY_PATH = <10g ORACLE_HOME/lib, 10g ORACLE_HOME/ctx/lib>
ORACLE_SID = instance name running on this database node.
PATH= $PATH:$ORACLE_HOME/bin;
TNS_ADMIN = $ORACLE_HOME/network/admin/<context_name> 4. Edit the $ORACLE_HOME/network/admin/tnsnames.ora file. Change the aliases for SID=<new RAC instance name>
5. Modify the listener.ora. Change the instance name and Oracle Home to match environment
6. Start the listener.
7. From the 10g ORACLE_HOME/appsutil/bin directory, create an instance-specific XML context file by executing the command:
adbldxml.pl tier=db appsuser=<APPSuser> appspasswd=<APPSpwd>8. De-register the current configuration using the command:
perl $ORACLE_HOME/appsutil/bin/adgentns.pl appspass=apps contextfile=$CONTEXT_FILE -removeserver9. Rename $ORACLE_HOME/dbs/init<rac instance>.ora , to a new name (i.e. init<rac instance>.ora.old in order to allow AutoConfig to regenerate the file using the RAC specific parameters.
10. From the 10g ORACLE_HOME/appsutil/bin directory, execute AutoConfig on the database tier by running the adconfig.pl script.
Now you should have the officially created environment file.
HTH.
Arnoud Roth

Oracle 6i forms issue with Oracle 9i Database

Hi Friends,
I am having Oracle Forms Developer installed with patchset18.The Version is 6.0.8.27.0
When i connect the forms builder to 9i Database (9.2.0.1) the form builder is getting crashed but i am able to connect the forms builder to e-business suite database(9.2.0.6)
I tried installing 9i Database(9.2.0.1) on windows 2003 server,windows xp,windows 2000.
When i connect my forms builder to any of these databases the forms builder is crashing with don't send message error on (ifbld60.exe).
Is there any compatibility issue between forms builder(6i) and oracle 9i(9.2.0.1).Please suggest me.
Regards,
Arun .N

Forms 6i connects to Oracle 9 databases just fine, even though it is no longer certified by Oracle.
First of all, can you connect to the database with SQL Plus? Make sure that works first.
The other thing that comes to mind is the AL32UTF8 character set. Forms 6i and other older Oracle software cannot connect to databases using it. But I have only seen that problem with Oracle 10g databases, so I am not sure about the Oracle 9 db.
Here is a thread discussing the problem: Re: connecting form 6i to oracle database 10G express edition

Connect oracle application server 10g with oracle database 9i

Hello, I am doing a project with Oracle Application Server and application server can not connect with my Oracle 9i database, how do my version of Oracle Application Server is the 10g, thanks for the help and excuse my English

Well, now it depends how do you want to access your 9i database from Application Server via J2EE application deployed at Application Server or via Portal.
For J2EE application, you can use connect string for your 9i database in datasources.xml of J2EE app.
For Portal application, again it depends what you want to do - create an data entry application or just want to fetch a report based on 9i database.
Hope I have provided answer to your question.
Regards.

Tuxedo 8.0 with Oracle 9i

Where can I get the information whether Tuxedo 8.0 has been certified to work with
Oracle 9i ?
Amit Kureel

Where can I get the information whether Tuxedo 8.0 has been certified to work with
Oracle 9i ?
Amit Kureel

Pre-loading Oracle text in memory with Oracle 12c

There is a white paper from Roger Ford that explains how to load the Oracle index in memory : http://www.oracle.com/technetwork/database/enterprise-edition/mem-load-082296.html
In our application, Oracle 12c, we are indexing a big XML field (which is stored as XMLType with storage secure file) with the PATH_SECTION_GROUP. If I don't load the I table (DR$..$I) into memory using the technique explained in the white paper then I cannot have decent performance (and especially not predictable performance, it looks like if the blocks from the TOKEN_INFO columns are not memory then performance can fall sharply)
But after migrating to oracle 12c, I got a different problem, which I can reproduce: when I create the index it is relatively small (as seen with ctx_report.index_size) and by applying the technique from the whitepaper, I can pin the DR$ I table into memory. But as soon as I do a ctx_ddl.optimize_index('Index','REBUILD') the size becomes much bigger and I can't pin the index in memory. Not sure if it is bug or not.
What I found as work-around is to build the index with the following storage options:
ctx_ddl.create_preference('TEST_STO','BASIC_STORAGE');
ctx_ddl.set_attribute ('TEST_STO', 'BIG_IO', 'YES' );
ctx_ddl.set_attribute ('TEST_STO', 'SEPARATE_OFFSETS', 'NO' );
so that the token_info column will be stored in a secure file. Then I can change the storage of that column to put it in the keep buffer cache, and write a procedure to read the LOB so that it will be loaded in the keep cache. The size of the LOB column is more or less the same as when creating the index without the BIG_IO option but it remains constant even after a ctx_dll.optimize_index. The procedure to read the LOB and to load it into the cache is very similar to the loaddollarR procedure from the white paper.
Because of the SDATA section, there is a new DR table (S table) and an IOT on top of it. This is not documented in the white paper (the white paper was written for Oracle 10g). In my case this DR$ S table is much used, and the IOT also, but putting it in the keep cache is not as important as the token_info column of the DR I table. A final note: doing SEPARATE_OFFSETS = 'YES' was very bad in my case, the combined size of the two columns is much bigger than having only the TOKEN_INFO column and both columns are read.
Here is an example on how to reproduce the problem with the size increasing when doing ctx_optimize
1. create the table
drop table test;
CREATE TABLE test
(ID NUMBER(9,0) NOT NULL ENABLE,
XML_DATA XMLTYPE
XMLTYPE COLUMN XML_DATA STORE AS SECUREFILE BINARY XML (tablespace users disable storage in row);
2. insert a few records
insert into test values(1,'<Book><TITLE>Tale of Two Cities</TITLE>It was the best of times.<Author NAME="Charles Dickens"> Born in England in the town, Stratford_Upon_Avon </Author></Book>');
insert into test values(2,'<BOOK><TITLE>The House of Mirth</TITLE>Written in 1905<Author NAME="Edith Wharton"> Wharton was born to George Frederic Jones and Lucretia Stevens Rhinelander in New York City.</Author></BOOK>');
insert into test values(3,'<BOOK><TITLE>Age of innocence</TITLE>She got a prize for it.<Author NAME="Edith Wharton"> Wharton was born to George Frederic Jones and Lucretia Stevens Rhinelander in New York City.</Author></BOOK>');
3. create the text index
drop index i_test;
exec ctx_ddl.create_section_group('TEST_SGP','PATH_SECTION_GROUP');
begin
CTX_DDL.ADD_SDATA_SECTION(group_name => 'TEST_SGP',
                            section_name => 'SData_02',
                            tag => 'SData_02',
                            datatype => 'varchar2');
end;
exec ctx_ddl.create_preference('TEST_STO','BASIC_STORAGE');
exec ctx_ddl.set_attribute('TEST_STO','I_TABLE_CLAUSE','tablespace USERS storage (initial 64K)');
exec ctx_ddl.set_attribute('TEST_STO','I_INDEX_CLAUSE','tablespace USERS storage (initial 64K) compress 2');
exec ctx_ddl.set_attribute ('TEST_STO', 'BIG_IO', 'NO' );
exec ctx_ddl.set_attribute ('TEST_STO', 'SEPARATE_OFFSETS', 'NO' );
create index I_TEST
on TEST (XML_DATA)
indextype is ctxsys.context
parameters('
    section group   "TEST_SGP"
    storage         "TEST_STO"
') parallel 2;
4. check the index size
select ctx_report.index_size('I_TEST') from dual;
it says :
TOTALS FOR INDEX TEST.I_TEST
TOTAL BLOCKS ALLOCATED:                                                104
TOTAL BLOCKS USED:                                                      72
TOTAL BYTES ALLOCATED:                                 851,968 (832.00 KB)
TOTAL BYTES USED:                                      589,824 (576.00 KB)
4. optimize the index
exec ctx_ddl.optimize_index('I_TEST','REBUILD');
and now recompute the size, it says
TOTALS FOR INDEX TEST.I_TEST
TOTAL BLOCKS ALLOCATED:                                               1112
TOTAL BLOCKS USED:                                                    1080
TOTAL BYTES ALLOCATED:                                 9,109,504 (8.69 MB)
TOTAL BYTES USED:                                      8,847,360 (8.44 MB)
which shows that it went from 576KB to 8.44MB. With a big index the difference is not so big, but still from 14G to 19G.
5. Workaround: use the BIG_IO option, so that the token_info column of the DR$ I table will be stored in a secure file and the size will stay relatively small. Then you can load this column in the cache using a procedure similar to
alter table DR$I_TEST$I storage (buffer_pool keep);
alter table dr$i_test$i modify lob(token_info) (cache storage (buffer_pool keep));
rem: now we must read the lob so that it will be loaded in the keep buffer pool, use the prccedure below
create or replace procedure loadTokenInfo is
type c_type is ref cursor;
c2 c_type;
s varchar2(2000);
b blob;
buff varchar2(100);
siz number;
off number;
cntr number;
begin
    s := 'select token_info from DR$i_test$I';
    open c2 for s;
    loop
       fetch c2 into b;
       exit when c2%notfound;
       siz := 10;
       off := 1;
       cntr := 0;
       if dbms_lob.getlength(b) > 0 then
         begin
           loop
             dbms_lob.read(b, siz, off, buff);
             cntr := cntr + 1;
             off := off + 4096;
           end loop;
         exception when no_data_found then
           if cntr > 0 then
             dbms_output.put_line('4K chunks fetched: '||cntr);
           end if;
         end;
       end if;
    end loop;
end;
Rgds, Pierre

I have been working a lot on that issue recently, I can give some more info.
First I totally agree with you, I don't like to use the keep_pool and I would love to avoid it. On the other hand, we have a specific use case : 90% of the activity in the DB is done by queuing and dbms_scheduler jobs where response time does not matter. All those processes are probably filling the buffer cache. We have a customer facing application that uses the text index to search the database : performance is critical for them.
What kind of performance do you have with your application ?
In my case, I have learned the hard way that having the index in memory (the DR$I table in fact) is the key : if it is not, then performance is poor. I find it reasonable to pin the DR$I table in memory and if you look at competitors this is what they do. With MongoDB they explicitly says that the index must be in memory. With elasticsearch, they use JVM's that are also in memory. And effectively, if you look at the awr report, you will see that Oracle is continuously accessing the DR$I table, there is a SQL similar to
SELECT /*+ DYNAMIC_SAMPLING(0) INDEX(i) */
TOKEN_FIRST, TOKEN_LAST, TOKEN_COUNT, ROWID
FROM DR$idxname$I
WHERE TOKEN_TEXT = :word AND TOKEN_TYPE = :wtype
ORDER BY TOKEN_TEXT, TOKEN_TYPE, TOKEN_FIRST
which is continuously done.
I think that the algorithm used by Oracle to keep blocks in cache is too complex. A just realized that in 12.1.0.2 (was released last week) there is finally a "killer" functionality, the in-memory parameters, with which you can pin tables or columns in memory with compression, etc. this looks ideal for the text index, I hope that R. Ford will finally update his white paper :-)
But my other problem was that the optimize_index in REBUILD mode caused the DR$I table to double in size : it seems crazy that this was closed as not a bug but it was and I can't do anything about it. It is a bug in my opinion, because the create index command and "alter index rebuild" command both result in a much smaller index, so why would the guys that developped the optimize function (is it another team, using another algorithm ?) make the index two times bigger ?
And for that the track I have been following is to put the index in a 16K tablespace : in this case the space used by the index remains more or less flat (increases but much more reasonably). The difficulty here is to pin the index in memory because the trick of R. Ford was not working anymore.
What worked:
first set the keep_pool to zero and set the db_16k_cache_size to instead. Then change the storage preference to make sure that everything you want to cache (mostly the DR$I) table come in the tablespace with the non-standard block size of 16k.
Then comes the tricky part : the pre-loading of the data in the buffer cache. The problem is that with Oracle 12c, Oracle will use direct_path_read for FTS which basically means that it bypasses the cache and read directory from file to the PGA !!! There is an event to avoid that, I was lucky to find it on a blog (I can't remember which, sorry for the credit).
I ended-up doing that. the events to 10949 is to avoid the direct path reads issue.
alter session set events '10949 trace name context forever, level 1';
alter table DR#idxname0001$I cache;
alter table DR#idxname0002$I cache;
alter table DR#idxname0003$I cache;
SELECT /*+ FULL(ITAB) CACHE(ITAB) */ SUM(TOKEN_COUNT), SUM(LENGTH(TOKEN_INFO)) FROM DR#idxname0001$I;
SELECT /*+ FULL(ITAB) CACHE(ITAB) */ SUM(TOKEN_COUNT), SUM(LENGTH(TOKEN_INFO)) FROM DR#idxname0002$I;
SELECT /*+ FULL(ITAB) CACHE(ITAB) */ SUM(TOKEN_COUNT), SUM(LENGTH(TOKEN_INFO)) FROM DR#idxname0003$I;
SELECT /*+ INDEX(ITAB) CACHE(ITAB) */ SUM(LENGTH(TOKEN_TEXT)) FROM DR#idxname0001$I ITAB;
SELECT /*+ INDEX(ITAB) CACHE(ITAB) */ SUM(LENGTH(TOKEN_TEXT)) FROM DR#idxname0002$I ITAB;
SELECT /*+ INDEX(ITAB) CACHE(ITAB) */ SUM(LENGTH(TOKEN_TEXT)) FROM DR#idxname0003$I ITAB;
It worked. With a big relief I expected to take some time out, but there was a last surprise. The command
exec ctx_ddl.optimize_index(idx_name=>'idxname',part_name=>'partname',optlevel=>'REBUILD');
gqve the following
ERROR at line 1:
ORA-20000: Oracle Text error:
DRG-50857: oracle error in drftoptrebxch
ORA-14097: column type or size mismatch in ALTER TABLE EXCHANGE PARTITION
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.CTX_DDL", line 1141
ORA-06512: at line 1
Which is very much exactly described in a metalink note 1645634.1 but in the case of a non-partitioned index. The work-around given seemed very logical but it did not work in the case of a partitioned index. After experimenting, I found out that the bug occurs when the partitioned index is created with dbms_pclxutil.build_part_index procedure (this enables enables intra-partition parallelism in the index creation process). This is a very annoying and stupid bug, maybe there is a work-around, but did not find it on metalink
Other points of attention with the text index creation (stuff that surprised me at first !) ;
- if you use the dbms_pclxutil package, then the ctx_output logging does not work, because the index is created immediately and then populated in the background via dbms_jobs.
- this in combination with the fact that if you are on a RAC, you won't see any activity on the box can be very frightening : this is because oracle can choose to start the workers on the other node.
I understand much better how the text indexing works, I think it is a great technology which can scale via partitioning. But like always the design of the application is crucial, most of our problems come from the fact that we did not choose the right sectioning (we choosed PATH_SECTION_GROUP while XML_SECTION_GROUP is so much better IMO). Maybe later I can convince the dev to change the sectionining, especially because SDATA and MDATA section are not supported with PATCH_SECTION_GROUP (although it seems to work, even though we had one occurence of a bad result linked to the existence of SDATA in the index definition). Also the whole problematic of mixed structured/unstructured searches is completly tackled if one use XML_SECTION_GROUP with MDATA/SDATA (but of course the app was written for Oracle 10...)
Regards, Pierre

Does Oracle Designer 10g work with Oracle 10g Express?

Guys:
Does anybody know if Oracle Designer works with Oracle 10g Express?
Regards,
Mike Gorman

Designer will not work on express edition of the Oracle Database. You will need the Standard or the Enterprise Edition of the Database.

Oracle ADF security integration with Oracle E-Business Suite SDK JAAS

I have an Oracle ADF 11.1.2.2 application that is using ADF security for authentication and authorization.
When we deploy this application to our JDeveloper integrated weblogic server, we utilize the security setting of "Custom" and use weblogic users and roles to map to the ADF application roles. In that environment our security is working properly.
I have a Weblogic 10.3.5 standalone server that has the ADF runtime installed as well as the Oracle E-Business Suite SDK JAAS implementation installed.
When I deploy the Oracle ADF application to the standalone weblogic server, I am directed to the JAAS login page when I attempt to access any JSF page (including those that I have granted View access through the anonymous-role. Does the Oracle ADF anonymous-role work (allow for anonymous page access) when JAAS security is handled by the Oracle E-Business Suite SDK JAAS implementation?
Per the SDK instructions, when we install the Oracle ADF deployment on Weblogic we have selected "DD only" for our security setting. We have defined enterprise roles in the Oracle ADF security setup (jazn-data.xml) that are assigned the appropriate application roles. Those enterprise roles have the same name (i.e. UMX|YOURROLE) as the E-Business Suite roles that are assigned to our test users. When we login with an E-Business Suite user / password we are receiving an error:
Error 401--Unauthorized
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.2 401 Unauthorized
Any thoughts on why that would be?
Thanks
Dan

Thanks Juan.
With the debugging options enabled it appears the issue is not an issue with the user / role credentials - it seems like the resource grants from jazn-data.xml are not being reviewed in my standalone weblogic instance EAR deployment:
[JpsAuth] Check Permission
PolicyContext: [TestApp]
Resource/Target: [untitled1PageDef]
Action: [view]
Permission Class: [oracle.adf.share.security.authorization.RegionPermission]
Result: [FAILED]
Evaluator: [ACC]
Failed ProtectionDomain:ClassLoader=sun.misc.Launcher$AppClassLoader@13f5d07
CodeSource=file:/app/oracle/product/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/adf-share-support.jar
Principals=total 2 of principals(
1. JpsPrincipal: oracle.security.jps.internal.core.principals.JpsAnonymousUserImpl "anonymous" GUID=null DN=null
2. JpsPrincipal: oracle.security.jps.internal.core.principals.JpsAnonymousRoleImpl "anonymous-role" GUID=null DN=null)
When I access the same page from my integrated weblogic server I see:
[JpsAuth] Check Permission
PolicyContext: [TestApp]
Resource/Target: [untitled1PageDef]
Action: [view]
Permission Class: [oracle.adf.share.security.authorization.RegionPermission]
Result: [FAILED]
Evaluator: [ACC]
Failed ProtectionDomain:ClassLoader=sun.misc.Launcher$AppClassLoader@13f5d07
CodeSource=file:/app/oracle/product/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/adf-share-support.jar
Principals=total 2 of principals(
1. JpsPrincipal: oracle.security.jps.internal.core.principals.JpsAnonymousUserImpl "anonymous" GUID=null DN=null
2. JpsPrincipal: oracle.security.jps.internal.core.principals.JpsAnonymousRoleImpl "anonymous-role" GUID=null DN=null)
When I review my EAR - I do see jazn-data.xml at:
/META-INF/jazn-data.xml
I will review the system-jazn-data.xml to see if the policy information has been migrated properly as part of the EAR deployment.
Thanks.
-Dan

OPA (Oracle Policy Automation)integration with Oracle Application R12

Hi,
We want to know checklist for OPA integration with Oracle Applocations( Ebussiness Suite). It is urgent, Can anybody help us on this.
It is very urgent. Any one can help us to integrate OPA (Oracle Policy Automation) with R12 Ebs.
Thanks in advance
Edited by: Venkat K.V on Sep 7, 2010 2:59 AM

The OPA team doesn't maintain a check-list of integration steps for EBS, but this should be a pretty standard web services integration using Oracle Determinations Server.
You might also want to check out this tutorial:
http://www.oracle.com/technetwork/apps-tech/policy-automation/overview/opa10-4.zip, which shows an example of how to integrate the OPA Oracle Web Determinations component with E-Business Suite.
Davin Fifield

Can Oracle 9iAS Workflow work with Oracle Database 11g?

I was trying to search the metalink for the above but was unable to find any helpful information. Does anybody here knows whether the above is certified and doable or not?
Thanks.
DW

What about using VMware Converter?
Here's our sitch: We (especially I) want to convert our stuff to Oracle Linux, and run it in Oracle VM. Our latest product is doing just that. But we have customers for whom we need to supply our product in a VMware image, for in case we go out of business they can still run our SaaS product.
So if we get more of our products to run in Oracle VM, could we use VMware's P2V converter to transform the Oracle VM images into VMware images? We just won't tell the VMware converter that its actually a virtual machine its converting. It is supposed to work on Linux.
Has anyone tried, or seen this work? I know its a matter of us trying at at the end of the day, but I'd like to hear about the experience of others.
thanks
Peter

Oracle Tuxedo 8.1 With Oracle 11g Database

Similar Messages

Maybe you are looking for