Oracle Workflow contract - Jamaica

June 7 2004
Our client is a major bank in Jamaica and they have a contract
requirement for a Oracle Workflow consultant with the following skills. This is a 6
months contract. It would be 3 weeks/month in Jamaica and 1 week back
home. All expenses including travel, accomodation (5 star) and meals
would be taken care of. There would also be a per diem and a bonus at
the end of contract.
Client open to considering Canada/US based candidates. This is a very urgent position. Client wants to start the contract ASAP.
Oracle Consultant – Workflow
· A Technical Consultant with expert experience with Workflow
· Expert technical experience and strong functional knowledge
· Experience using “Workflow Builder” as a tool
· Experience with configuration, customization, and modification of
pre-configured workflows with Workflow Builder to suite business
applications
· Customization of workflow and optional set-ups such as enabling
email process
· Experience with configuration/escalation/exceptions in workflow
· Workflow Builder is accessed at the systems administration level so
consultant has to have experience with systems administration
(application system administration)
· A “workflow” guru would have performed this function for
at least 50% of the time – (rest of the time he/she would have
done application system administration, technical
design/development…
Skills:
Very strong technical user level of workflow
Very strong experience with Workflow Builder
Oracle 11i, SQL or SQL Plus
Workflow knowledge from HR or elements of HR Module
Please contact:
Rohini Mehtani
IT Resource Consultant
Bevertec
[email protected]
416-695-7525 ext: 229

MRcoolpatti wrote:
Oracle Workflow builder raised below error for both Windows xp SP2 32bit and Windows 7 64 bit.
Workflow Builder 2.5
Run- time error '367'
Can't load (or register) custom control: 'wfnvg20.ocx'
Anyone have any idea?
Please see (Runtime Error 367 Cannot Register wfnvg20.ocx Message When Starting The Workflow Builder (Doc ID 123457.1)).
Thanks,
Hussein

Similar Messages

  • Oracle workflow consultant (with workflow builder exp)

    May 25 2004
    Our client is a major bank in Jamaica and they have a requirement for an Oracle Workflow Consultant. This is a 6 months contract and it would be 3 weeks/month in Jamaica and 1 week/month back home. All expenses including trave, accomodation (5 star) and meals would be taken care of. There would also be a per diem and a bonus at the end of contract.cllient considering US/Canada based consultants.
    ·     A Technical Consultant with expert experience with Workflow
    ·     Expert technical experience and strong functional knowledge
    ·     Experience using “Workflow Builder” as a tool
    ·     Experience with configuration, customization, and modification of pre-configured workflows with Workflow Builder to suite business applications
    ·     Customization of workflow and optional set-ups such as enabling email process
    ·     Experience with configuration/escalation/exceptions in workflow
    ·     Workflow Builder is accessed at the systems administration level so consultant has to have experience with systems administration (application system administration)
    ·     A “workflow” guru would have performed this function for at least 50% of the time – (rest of the time he/she would have done application system administration, technical design/development…
    Skills:
    Very strong technical user level of workflow
    Very strong experience with Workflow Builder
    Oracle 11i, SQL or SQL Plus
    Workflow knowledge from HR or elements of HR Module
    Please contact for more details:
    Rohini Mehtani
    IT Resource Consultant
    Bevertec
    [email protected]
    416-695-7525 ext: 229

    Could you please tell me ...........
    Whether Oracle application version 11.5.9 is compatible with OAF 11.5.10 (patch p4045639_11i_GENERIC). If yes, then why my pages are not working?
    Not even the Existing FWK Tutorial application is also not working, nothing is working!!! Do I need to modify somehting?
    Please suggest any solution I have to Develop new self service application.

  • Advantages of BPEL over Oracle Workflow?

    I am considering using SOA as an interface technology in an Oracle EBS deployment. What would be the benefits of using Oracle SOA Suite over simply using Oracle Workflow w/ Oracle XML Gateway and customizing calls from certain E-Business Suite pages?
    I need to have real-times interfaces embedded in some EBS pages, but the interfaces will go away after a year or two, so I am considering that a quick-and-dirty solution might be better then trying to go whole-hog.

    Workflow may be scheduled for desupport, but my institution has a support contract with EBS that will probably last quite a while. Relevant Metalink articles (Doc ID 391546.1) do mention that there are exceptions to workflow desupport on 11/07 for Workflow bundled with another package.
    So, beyond the desupport issues, what would be other things included with SOA suite that I couldn't do (or would be resource-prohibitive to do) with XML Gateway and Workflow?

  • Custom RTF templates in Oracle Core Contracts ..

    Hello:
    We want to create custom RTF templates in Oracle Core Contracts along with custom data templates.
    We do not want to use XSL-FO templates since we are finding this too complex to work with ... also the fact that the XML data is being generated by some internal OAF processes that we cannot control.
    This is unnecessarily too complex for us.
    Can we create our own reporting using XML -Publisher and integrate it in the system ?
    Any thoughts on this would be appreciated ... Yesh

    Srini:
    I did read those pages and unless I am missing something .. it is basically saying the follwing:
    Copy the seeded XSL-FO templates and make changes to them and then upload them back. I have no real access to the xml data since it is somehow pre-generated. I do not have a choice of using RTF templates along with the ease of Word based formatting.
    The above process goes against the way in which we can write our own reports in XMLP:
    (a) Create our own data templates (use our own SQL)
    (b) Create our own layout templates (using RTF or XSl_FO)
    So I am stuck into undertsanding .... OAF, Java API's ,etc that I should not have to understand to generate a report ...
    yesh

  • Oracle Workflow 2.6 with Oracle 8.1.7 for linux

    Is Oracle Workflow Server 2.6 available for Linux as a
    standalone product against an Oracle 8.1.7 database?
    Oracle Workflow does not seem to be included in the Integration
    Server option with the 8.1.7 installation.
    I've only found the Oracle Workflow Server included with the 9i
    database. Will this work with 8.1.7 as well or does it require
    9i db?
    Thanks in advance for your help,
    Josi Antonio

    Is Oracle Workflow Server 2.6 available for Linux as a
    standalone product against an Oracle 8.1.7 database?
    Oracle Workflow does not seem to be included in the Integration
    Server option with the 8.1.7 installation.
    I've only found the Oracle Workflow Server included with the 9i
    database. Will this work with 8.1.7 as well or does it require
    9i db?
    Thanks in advance for your help,
    Josi Antonio

  • Issue in notification API for oracle workflow

    Hi,
    I am facing issue in sending oracle workflow notification. i have created a simple workflow with a process.
    I wrote one package which is creating adhoc role and sending the notification through api I(wf_notification.send).
    I am able to get the notification as well as email notification but without attribute values. My workflow attributes are getting replaced by null, but message body is appearing.
    Please help me, its urgent.
    Thanks
    Rajni

    I doubt that Oracle 7 DB is not supported. You may consider raising a SR with support.
    Regards,
    Anuj

  • Oracle Workflow 2.6.4 Migration

    Hi,
    One of our customer wants to migrate Oracle Workflow 2.6.4 from http server to WLS server and they are following the this blog :
    https://blogs.oracle.com/warehousebuilder/entry/owb_11gr2_tip_downloading_and_installing_workflow_monitor_264
    Now they have following questions ?
    - Is this new setup ( WLS+Oracle Workflow 2.6.4 ) is supported by  oracle officially ? If not then what is other option ?
    - Where can we find the software - Oracle Database 10gR2 Companion CD(10.2.0.1) ? it is not available on OTN. Can we get the MOS link for it ?
    Best Regards,
    Anurag

    For your second question, pl see MOS Doc 1476075.1

  • Custom Workflow using Oracle Workflow in ContentDB

    Hi,
    Could we use custom workflow which is made using Oracle Workflow instead of BPEL.
    Regards,
    Yulisar

    Having registered custom workflows for Content DB via Enterprise Manager, potentially you can use any tool capable of dequeuing/enqueing messages from the IFS_BPEL_OUT/IFS_BPEL_IN advanced queues as part of a custom workflow process.
    By default, we assume you are using Oracle BPEL PM with its Advanced Queue adapater to process the queue messages. However, there is nothing stopping using Oracle Workflow or any tool for that matter.
    HOWEVER!!! Warning!!! There is a high probability that Content DB will drop the bundled Oracle Worflow installation in the near future. What this means, is that you should consider installing/configure/patching your own separate Oracle Workflow installation and not rely on the bundled Content DB solution which is used internally for Serial and Parallel Approval workflows.
    thanks,
    Matt.

  • How to commit a transaction in Oracle Workflow

    Hi All,
    Oracle says there should not be any commit in Oracle WF .It is the responsbility of the calling program to Call Commit.
    I have the following Requirement:-
    I want to insert a record in one of the custom table, when a record is saved in one of the Oracle Apps Form( for e.g. insert a record in the custome table when user creates PO.)
    What I have done is :-
    1) Added a subscription to one of the seeded events that is raised when user saves a record in the Oracle apps.
    2) Designed a Custom Function, that is called when the above subscription is triggered off.
    3)The above custom function inserts a record in the custom table.
    Q ) where to write a Commit ( as this custom function is called from the WF and WF says, dont put commit in the WF,it should be called by the callling program)
    Can also you explain me , when user presses the Save button on the Oracle standard form--> that calls the Oracle API to create a record in the DB and commit , ---> then the event is raised and trigger offs all the subscriptions where does it commit then?
    Thanks

    Hi,
    The commit should be done by the form, or whatever raises the business event.
    The API fires the event in the same transaction (unless the subscription is deferred), and then the commit is issued. This commits the transaction, and all actions of the event subscription.
    If the subscription is deferred, then the concurrent request which processes the subscription will issue the commit on completion.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://thoughts.workflowfaq.com ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • Urgent help needed in inserting data into a custom table in oracle WorkFlow

    Hi
    I am trying to get data from the WF and insert into a custom table..
    I read that workflow procedures WONT allow commits...
    Oracle Workflow will not support autonomous commits in any procedure it calls directly. If you need to perform commits, then embed your SQL in a subprocedure and declare it as an autonomous block. This subprocedure must be capable of being rerun. Additionally, note that Oracle Workflow handles errors by rolling back the entire procedure and setting its status to ERROR. Database updates performed by autonomous commits cannot be rolled back, so you will need to write your own compensatory logic for error handling
    Have anyone did this..
    Please give me some idea ...It is urgent
    I am getting data using getitemattribute..and try to insert it into a custom table
    thanks
    kp

    Pl do not post duplicate threads - insert dont work in Workflow
    Srini

  • How to run Oracle workflow in windows 7 os

    Hi,
    Am new to oracle workflow.
    I have installed oracle workflow successfully in my laptop.
    After installation I dont see any shortcut's in my desktop.
    Can any one sugess me how to run oracle workflow.
    Steps to begin from basic level.
    Thanks
    Balaji

    You mean to say you installed Workflow Builder on your laptop? See that Oracle Workflow has a Client Side (WF Builder), a backend Server side and middle application side.
    Assuming you successfully installed the client side then you must have a group of programs called Oracle OUIHome and there one called Application Development. There you should be able to find Workflow builder.
    Useful notes for WF Builder:
    How To Download and Install the Latest Oracle Workflow Builder (Client Tool) and XML Gateway Message Designer for E-Business (Doc ID 261028.1)
    which leads to <internal URL removed>
    Regards.

  • [Oracle workflow 2.6.3] unable to find product oracle.swd.jre[1.4.0, 1.4.4]

    I want to install Oracle workflow 2.6.3 on my server, but i get the following error while installing the program.
    unable to find product oracle.swd.jre 1.4.0, 1.4.4
    Below the step i took:
    I selected the oracle_home and the path where my db has been installed. Then next... and the universal installer gives me that error. I can choose to continue or to go back. I tried to continue and oracle worflow has been succesfull installed. bet when to try to run the workflow manager. I get the following result:
    C:\oracle\product\10.2.0\db_1\wf\install>set JAVA_HOME=
    C:\oracle\product\10.2.0\db_1\wf\install>"\bin\java" -classpath ";C:\oracle\prod
    uct\10.2.0\db_1\wf\java;\lib\rt.jar;\lib\i18n.jar;C:\oracle\product\10.2.0\db_1\
    wf\install\WorkflowCA.jar;C:\oracle\product\10.2.0\db_1\jlib\ewt3.jar;C:\oracle\
    product\10.2.0\db_1\jlib\ewt3-nls.jar;C:\oracle\product\10.2.0\db_1\jlib\share.j
    ar;C:\oracle\product\10.2.0\db_1\jlib\swingall-1_1_1.jar;C:\oracle\product\10.2.
    0\db_1\jlib\fndctx.jar;C:\oracle\product\10.2.0\db_1\jlib\wfjava.jar;C:\oracle\p
    roduct\10.2.0\db_1\jlib\wfapi.jar;C:\oracle\product\10.2.0\db_1\jdbc\lib\classes
    12.jar;C:\oracle\product\10.2.0\db_1\sysman\jlib\emd.jar;C:\oracle\product\10.2.
    0\db_1\jlib\emConfigInstall.jar;" oracle.apps.fnd.wf.install.db.WorkflowCA /wfdi
    r "C:\oracle\product\10.2.0\db_1\wf" /orahome "C:\oracle\product\10.2.0\db_1" /
    wintz "W. Europe Daylight Time" /systemroot "C:\WINDOWS" /ospath "C:\OraHome_2\
    bin;C:\oracle\product\10.2.0\db_1\bin;C:\OraHome_1\bin;C:\OraHome_1\jre\1.4.2\bi
    n\client;C:\OraHome_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Sy
    stem32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel;C:\Program Files
    \Support Tools\;"C:\Program Files\Symantec\Norton Ghost 2003\";C:\Program Files\
    QuickTime\QTSystem\;C:\Program Files\Common Files\Nero\Lib\;C:\Program Files\Com
    mon Files\Nero\Lib\;C:\Program Files\Common Files\Nero\Lib\;C:\Program Files\Com
    mon Files\Nero\Lib\;C:\Program Files\Common Files\Nero\Lib\;C:\Program Files\Com
    mon Files\Nero\Lib\;C:\Program Files\Common Files\Nero\Lib\;C:\Program Files\Com
    mon Files\Nero\Lib\"
    The system cannot find the path specified.
    Anyone an idea to resolve it...
    tnx in advanced....
    Edited by: user565199 on 15-jan-2009 3:33
    Edited by: user565199 on 15-jan-2009 3:52

    sorry maybe a noob question but does it means io have to install the whole db again?I don't know. Try to install OWF 2.6.4 and maybe it upgarde all compnents from OWF 2.6.3
    Are can you choose to install the workflow server only. When i start the install file with the universal installer i can only choose forYou need additional Oracle Database Companion CD, for link look at this message
    (from thread which I provided in prev. post)
    Re: Create Process Flow
    Regards,
    Oleg

  • Process flows without Oracle Workflow?

    I am using OWB 10.2, running with a 10.2 database. I want to create a new workflow module, package, and flow, and execute it the process flow using the OWB scheduler. The documentation implies that this configuration is possible, but when I create the workflow module it wants an Oracle Workflow connection for the location. I get the feeling that I'm overlooking something basic in the documentation.
    QUESTION:
    1) Is Oracle Workflow REQUIRED to create, deploy, and execute a process flow?

    Hi,
    Oracle Workflow is required for deploying processflow.
    Where did you read in documentation about possibilities of running processflows without OWF? OWB instalation guide tells:
    "If you plan to use Warehouse Builder process flows, you need to install Oracle Workflow to enable deployment."
    Regards,
    Oleg

  • URGENT: Oracle Workflow Error: API-10020 on Creation of OWB Process Flows

    I am trying to use Oracle Workflow to create Process Flows, in order to link together various mappings and components in Oracle Warehouse Builder. However, in the process flow editor window when I attempt to drag an object such as a mapping onto the editor panel, I get an error message stating the below:
    API-10020: Unable to determine if the map is a PLSQL or SQLLDR map, please correct the map or choose another map.
    All my maps are in PLSQL, and the language setting is set to this. I have tried modifying the langauge settings to see if it makes a difference but with no luck. My colleague believes this is a known bug in Oracle Workflow and there is a patch available to correct it.
    Can anyone help with this query please? Thank you for your time.

    In some versions of OWB (10.1, 10.2) The mapping property will display PL/SQL, but will actually be set to NULL in the repository (which will cause PL/SQL to be displayed as default).
    The fix is easy enough: in the developer navigator, right-click on the mapping and go to configure and set the generation language first to something other then PL/SQL (you should get an error) and then place it back to PL/SQL. This should force the GUI to reset the parameter.
    Alternatively, use OMB*Plus:
    OMBALTER MAPPING 'MAPPINGNAME' SET PROPERTIES \
    (GENERATION_LANGUAGE) VALUES ('PLSQL');
    Good Luck,
    Robbert

  • Calling Oracle Workflow in Real-Time

    I want to modify the logic in Oracle Apps (both Oracle self-service (pure HTML and JSP) and Oracle Forms applications) to make real-time calls to a mainframe system. The page needs to take different actions depending on the data from the mainframe system.
    I want to avoid actually customizing the Apps and Forms pages if possible due to customization maintenance and support issues. I have been told that I can use Oracle Workflow to modify the actions of the pages without having to resort to customizations, as calls to Workflow are already embedded. Is this true, and if so, how would I go about inserting a call to a mainframe system?
    I am considering mainframe calls using either a proprietary ODBC driver from a third-party vendor, or devising some sort of SOA interface to the mainframe (I know it would require custom development on the mainframe side).
    Thanks!

    I'm pretty sure the sbRIO cards only have 1 FPGA on them.  So when you load the second FPGA code, the first is being overwritten.  You need to make a single FPGA VI that can handle both functions.  If you post your code, we can give more detailed advice.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

Maybe you are looking for

  • Setting up Users - Best Practices

    03/28/2007 11:53:42 AM Reply | Quote | Top | Bottom Hi there. We are a large organization with a website consisting of over 40,000 pages. We have multiple users who need access to various parts of the website. We have discovered different methods of

  • Smart Forms: u0080(EUR)-symbol in text  - #-symbol in Smart Forms

    Hello, If a user writes the €(EUR)-symbol in a text (e.g. positions-text in an order, VA01) the Smart Form shows a #-symbol. Does anyone know the reason for this behavior and how to correct it? Best regards, Stefan

  • Sum(ai.  INVOICE_AMOUNT ),sum(ai. AMOUNT_PAID)

    hi i have this query with me ,i require require sum(ai. INVOICE_AMOUNT ),sum(ai. AMOUNT_PAID) SELECT TRUNC (ai.gl_date), gcc.segment1, gcc.segment2,        aca.amount paymentamount, aca.vendor_name suppliername,        aca.check_date paymentdate, ai.

  • IWeb application will not open

    Why is it my iWeb only opens my one site page? I go to applications, double click iWeb application and it only opens my current site. I go to file>new site and still opens my current web site

  • .pem file?

    Im building a web site and i need to use a .pem file for a shopping cart. Does iWeb support .pems'. I know nothing about this stuff but i have made it a long way in just a day i love iWeb. If there is a different file i can use please let me know. I