Oracle Workflow mailer error

I have Oracle 11, which we tried configuring to use TLS encryption but it failed. So I installed IIS relay, to avoid enabling TLS on oracle.
Once I did this we did a simple email test and it was successful.  We then tried a live Workflow process,
According to the workflow/diagram above, every stage should send an Email and Oracle Notification, after an LPO is raised. What is interesting is Approver1 and 2 get both Email and oracle notification. However, The LPO raiser only gets an email notification, but not an oracle notification.
Note: IIS relay does not support IMAP, hence is IMAP inbound not configured.

I have Oracle 11, which we tried configuring to use TLS encryption but it failed. So I installed IIS relay, to avoid enabling TLS on oracle.
Once I did this we did a simple email test and it was successful.  We then tried a live Workflow process,
According to the workflow/diagram above, every stage should send an Email and Oracle Notification, after an LPO is raised. What is interesting is Approver1 and 2 get both Email and oracle notification. However, The LPO raiser only gets an email notification, but not an oracle notification.
Note: IIS relay does not support IMAP, hence is IMAP inbound not configured.

Similar Messages

  • Workflow mailer error

    Hi ,
    I was getting the workflow mailer error from R12. I tried to start,but failed......after that I got a confirmation from my client that somebody changed a table, then I checked again  and found Workflow mailer working fine....I didnt get what happened on this...
    friends, If you have any idea on this, please share

    Pl post details of OS, database and EBS versions. Has this mailer worked before ? If so, what changes has been made recently ? Pl also see these MOS Docs
    How to Troubleshoot 'Validation failed' Errors when Starting the Mailer          (Doc ID 463354.1)
    Unable To Start Workflow Notification Mailer          (Doc ID 418329.1)
    How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer Issues          (Doc ID 753845.1)
    Workflow Mailer Will Not Start Stays In Starting Status          (Doc ID 837893.1)
    Unable To Connect To The Mail Account. Check The Host, User Name And Password          (Doc ID 1123684.1)
    HTH
    Srini

  • Regarding Workflow mailer error

    Hi
    Could anyone teach me how to troubleshooting these errors in log of mailer?
    My customer made mailer available through OAM and could send notification.
    However, a lot of errors were found in log of mailer.
    Quote
    [Nov 7, 2011 8:33:55 PM JST]:1320665635770:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665633553:10:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10011
    [Nov 7, 2011 8:33:54 PM JST]:1320665634490:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665634490:11:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.read()]:10consecutive errors occurred
    [Nov 7, 2011 8:33:57 PM JST]:1320665637002:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665634490:11:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.cp.gsc.Processor.performError(ProcessorException)]:Maximum number of errors have occurred for this processing thread.
    <af type="tenured" id="106" timestamp="Nov 07 20:33:58 2011" intervalms="3796.734">
    <minimum requested_bytes="98320" />
    <time exclusiveaccessms="0.032" meanexclusiveaccessms="0.032" threads="0" lastthreadtid="0x3225CB00" />
    <refs soft="399" weak="183" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
    <tenured freebytes="0" totalbytes="18192896" percent="0" >
    <soa freebytes="0" totalbytes="18192896" percent="0" />
    <loa freebytes="0" totalbytes="0" percent="0" />
    </tenured>
    <gc type="global" id="106" totalid="106" intervalms="3796.788">
    <expansion type="tenured" amount="3553280" newsize="21746176" timetaken="0.000" reason="insufficient free space following gc" />
    <finalization objectsqueued="27" />
    <timesms mark="22.192" sweep="0.514" compact="0.000" total="23.115" />
    <tenured freebytes="6622496" totalbytes="21746176" percent="30" >
    <soa freebytes="6405408" totalbytes="21529088" percent="29" />
    <loa freebytes="217088" totalbytes="217088" percent="100" />
    </tenured>
    </gc>
    <tenured freebytes="6524176" totalbytes="21746176" percent="30" >
    <soa freebytes="6383376" totalbytes="21605376" percent="29" />
    <loa freebytes="140800" totalbytes="140800" percent="100" />
    </tenured>
    <refs soft="214" weak="167" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
    <time totalms="23.241" />
    </af>
    [Nov 7, 2011 8:34:29 PM JST]:1320665669022:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:10.140.102.13:73020:1320665606034:1:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10005
    [Nov 7, 2011 8:34:36 PM JST]:1320665676474:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:(BusinessEvent{name=oracle.apps.fnd.cp.gsc.SvcComponent.start, key=SVC:07-NOV-2011, priority=50, correlationId=null, sendDate=Mon Nov 07 20:34:29 JST 2011, receiveDate=null, From Agent:  , To Agent:  , Last Subscription=  , Error Message=null, Error Stack=null, CONTAINER_TYPE=GSM, CONTAINER_PROCESS_ID=133833, COMPONENT_ID=10005, [email protected], BES_PAYLOAD_OBJECT=false})
    [Nov 7, 2011 8:34:46 PM JST]:1320665686481:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(int, String, String)]:Successfully retrieved component details from the database
    [Nov 7, 2011 8:34:46 PM JST]:1320665686614:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10005
    [Nov 7, 2011 8:34:46 PM JST]:1320665686772:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665686772:13:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.read()]:10consecutive errors occurred
    [Nov 7, 2011 8:34:46 PM JST]:1320665686812:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665686772:13:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.cp.gsc.Processor.performError(ProcessorException)]:Maximum number of errors have occurred for this processing thread.
    [Nov 7, 2011 8:35:29 PM JST]:1320665729053:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:10.140.102.13:73020:1320665606034:1:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10005
    <af type="tenured" id="107" timestamp="Nov 07 20:35:36 2011" intervalms="98237.510">
    <minimum requested_bytes="98320" />
    <time exclusiveaccessms="0.024" meanexclusiveaccessms="0.024" threads="0" lastthreadtid="0x330E6900" />
    <refs soft="483" weak="329" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
    <tenured freebytes="0" totalbytes="21746176" percent="0" >
    <soa freebytes="0" totalbytes="21605376" percent="0" />
    <loa freebytes="0" totalbytes="140800" percent="0" />
    </tenured>
    <gc type="global" id="107" totalid="107" intervalms="98237.593">
    <expansion type="tenured" amount="1048576" newsize="22794752" timetaken="0.000" reason="insufficient free space following gc" />
    <finalization objectsqueued="25" />
    <timesms mark="20.137" sweep="0.800" compact="0.000" total="21.178" />
    <tenured freebytes="6998816" totalbytes="22794752" percent="30" >
    <soa freebytes="6623520" totalbytes="22419456" percent="29" />
    <loa freebytes="375296" totalbytes="375296" percent="100" />
    </tenured>
    </gc>
    <tenured freebytes="6900496" totalbytes="22794752" percent="30" >
    <soa freebytes="6671632" totalbytes="22565888" percent="29" />
    <loa freebytes="228864" totalbytes="228864" percent="100" />
    </tenured>
    <refs soft="215" weak="169" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
    <time totalms="21.265" />
    </af>
    I have checked the below notes,but I'm not clear.
    761434.1 Workflow Mailer fails to star : Maximum Number Of Errors (100) Have Been Reached : WebSession.isSessionRecreated
    333017.1 OWF.G Mailer just started dumping a OutOfMemoryError
    Please teach me what's the meaning of errors and what we should deal with them.
    Best Regards
    Liying

    Please post the details of the application release, database version and OS.
    Please see these docs.
    Java.Lang.Outofmemoryerror On Large Inbound XML Message [ID 560680.1]
    Intermittently Notification Emails are not Received [ID 1315344.1]
    OWF.G Mailer just started dumping a OutOfMemoryError [ID 333017.1]
    Output Post Processor is Down With Error "Insufficient Free Space Following GC" [ID 885607.1]
    Thanks,
    Hussein

  • Urgent help needed in inserting data into a custom table in oracle WorkFlow

    Hi
    I am trying to get data from the WF and insert into a custom table..
    I read that workflow procedures WONT allow commits...
    Oracle Workflow will not support autonomous commits in any procedure it calls directly. If you need to perform commits, then embed your SQL in a subprocedure and declare it as an autonomous block. This subprocedure must be capable of being rerun. Additionally, note that Oracle Workflow handles errors by rolling back the entire procedure and setting its status to ERROR. Database updates performed by autonomous commits cannot be rolled back, so you will need to write your own compensatory logic for error handling
    Have anyone did this..
    Please give me some idea ...It is urgent
    I am getting data using getitemattribute..and try to insert it into a custom table
    thanks
    kp

    Pl do not post duplicate threads - insert dont work in Workflow
    Srini

  • Installing workflow mailer / notification mailer on Linux

    Hi,
    I want to install the notification mailer on a Linux machine (Oracle 9i Client already installed), but I can't find it in the Universal Installer (Oracel 9.2.0 Server Cds)!
    Where can I find the Oracle Workflow Mailer?
    Documentation says:
    Within the Oracle Universal Installer, select the product Oracle9i Client. Then select the Custom
    installation type and choose the Oracle Workflow client components that you want to install.
    Some useful information:
    - I've got the Linux 9.2.0 Server Cds.
    - The database (with Oracle Workflow already installed) resides on another (Windows-) machine.
    - I like to use sendmail for the notification emails.
    Any help is very much appreciated. Thanks!
    Erik

    Sorry, but I don't want to install the Workflow Server! Because it's a client machine and I don't want to install a database server just to get the workflow mailer.
    Documentation says:
    Workflow customers running on NT/2000 are certified to
    install the UNIX version of the Oracle Workflow
    Notification Mailer (on UNIX) and connect to a Workflow
    Server database running on NT/2000.That is exactly what I want to do, but I can't find the Workflow Notification Mailer in the Universal Installer.
    Erik

  • Change Oracle Workflow Sender address?

    Dear all,
    Now the oracle workflow send out email to users with the sender (From) *Oracle Workflow OBS [[email protected]]*
    Does anyone know how can I change to Sender (From) *Oracle Workflow OBS [[email protected]]*
    Please advice,
    Amy

    After bounce all workflow service, it takes the effect.
    Original
    # From: value of the from field in the header of mail message sent
    # by the Oracle Workflow Mailer
    FROM=Oracle Workflow OBS
    Modify To
    # From: value of the from field in the header of mail message sent
    # by the Oracle Workflow Mailer
    FROM=Oracle Workflow OBS
    The header of the email change from "Oracle Workflow OBS [[email protected]]" to "Oracle Workflow OBS 2 [[email protected]]" . But the [[email protected]] didn't change.
    Please advice,
    Amy

  • Workflow Notification Mailer error

    Hi all,
    I am logged in Application Manager and it shows that Mailer "Stopped with error".
    Service Instances for Generic Service Component Container shown as running.
    Here is what I see in Mailer Details:
    Definition
         ID          10006          Name          Workflow Notification Mailer
         Startup Mode          Automatic          Container Type          Oracle Applications GSM
         Inbound Agent          Workflow Notification In Queue          Outbound Agent          Workflow Notification Out Queue
         Correlation ID                              
         Status Information          This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, AUTOCLOSE_FYI=N, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=Y, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=, EXPUNGE_ON_CLOSE=Y, PROCESSOR_OUT_THREAD_COUNT=1, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:OPEN_MAIL_FYI, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_6#986$!0# `+$!**^^A8&@^8^00@%!0&B8%B}#A*|^#, RESET_NLS=N, HTTP_USER_AGENT=Mozilla/4.76, PROCESS=Process, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, DISCARD=Discard, ACCOUNT=spi\workflow, FROM=Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://finappstest01kt.seattlepacificindustries.com:8001/pls/SPIUAT, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=10.0.4.44, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, INLINE_ATTACHMENT=N, OPEN_INVALI
    Where do I need to look for a resolution?
    Thanks,
    Eugene

    Hi,
    Have a look at the following documents.
    Note: 463354.1 - How to troubleshoot 'Validation failed' errors when starting mailer
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=463354.1
    Note: 753845.1 - How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer Issues
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=753845.1
    Note: 257723.1 - Error SvcComponentContainer
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=257723.1
    Regards,
    Hussein

  • Oracle Workflow Manager, Agent Listener, and Java Mailer problem

    Hi,
    I am not sure this topic to this forum, since this might be installation issue.
    But I am hitting a big wall.
    I had Windows 2000 SP4.
    I have already installed Oracle Database 10gR1, Oracle Developer 10gR2, and Oracle Workflow 2.6.3 Standalone previously.
    Including :
    - Oracle Workflow Server 2.6.3
    - Oracle Workflow Builder 2.6.3.5
    - Apache HTTP Server 9.0.4
    - Workflow Middle Tier
    Anything seems to right, including the Notification Mailer and the Business Event.
    And I had also made backup of them surely.
    Now,
    I'd like to change into Oracle Database 10gR2 because :
    1. Some errors I found when I tried to call a Report from Oracle Form.
    Unable to connect to Report Server ...
    I thought Oracle Database 10gR1 is not suitable for Oracle Developer 10gR2.
    2. And in the OWF 2.6.3 Workflow Home Page, there was no Logout button (which I found in OWF 2.6.4)
    I removed my previous installation including Oracle Workflow.
    After strugglineg in the installation of Oracle Database 10gR2, now I am facing another problem with Oracle Workflow.
    I succesfully installed Oracle Workflow 2.6.4 Server and Oracle Workflow Manager (standalone version),
    and the Oracle Workflow Middle Tier.
    After I launch Oracle Workflow Configuration Assisstant, everthing seems to be normal.
    I succed to open the Oracle Workflow Home Page (and found the Logout button there)
    Next, I tried to navigate to the Oracle Workflow Manager.
    1. I start the OC4J_Workflow_Management_Container --> initialized
    2. OC4J_Workflow_Component_Container
    The following error line appeared in the OC4J command prompt
    06/05/26 10:31:40 LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.Logger.Logger(String,
    int) : Logging to System.out until necessary parameters are retrieved for Logger
    to be properly started.
    06/05/26 10:31:40 LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.
    initializeStateMachine() : BEGIN [default implementation]
    06/05/26 10:31:40 LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.
    getNewWorkflowContext() : BEGIN
    06/05/26 10:31:45 LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.
    loadGlobalParameters() : BEGIN
    06/05/26 10:31:48 oracle.apps.fnd.wf.common.ContextFactoryException: Unable to g
    et connection from data source because the following Exception occurred -> java.
    sql.SQLException: ORA-28000: the account is locked
    06/05/26 10:33:57 Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)
    initialized
    3. finally it initialized
    Next I tried to go to Oracle Workflow Manager from related link of Enterprise Manager
    It is said that the OWF_MGR is locked
    (I surprised since I had UNLOCKED the OWF_MGR after the installation and succeed to login at the Workflow Home Page)
    And the following error line appeared in the commaned prompt after that
    06/05/26 10:35:03 OrionCMTConnection not closed, check your code!
    06/05/26 10:35:03 Logical connection not closed, check your code!
    06/05/26 10:35:03 (Use -Djdbc.connection.debug=true to find out where the leaked
    connection was created)
    4. I re-UNLOCK the OWF_MGR and login to Oracle Workflow Manager
    I noticed that the Agent Listener and Notification Service is Unavailable
    (In OWF 2.6.3, The Agent Listener was started and Notification Service was waiting to be configured)
    I tried to start one of the Agent Listener, but the following error appeared
    ERROR: The Service Component Container is not running
    Well, I had the same problem when installing the OWF 2.6.3
    I tried to uninstall (remove) and re-install it like I had done before in OWF 2.6.3
    (based on someone's post in Oracle's forum)
    But this time, the re-installation won't fix this problem. (It was succeed in the OWF 2.6.3)
    Everytime I start the OC4J, using wfmgrstart.bat and wfsvcstart.bat
    the OWF_MGR is re-LOCKED(TIME) automatically.
    And the servlet (WFALSNRSVC and WFMLRSVC) are not running.
    I am worry, since I cannot use the Notification Mailer if this problem had not fixed yet.
    (In OWF 2.6.3, the mailer was not available until those servlet is Started)
    Sorry for the long post.
    Any help would be grateful.
    Many thanks,
    Buntoro

    Hi,
    Finally, I have found the solution.
    Step :
    1. Start all of the Oracle Service, except for the OC4J
    If you have already started OC4J, then stop them
    Unlocked the <wf_manager_user>
    2. Search in your Oracle Home : data-sources.xml
    There should be two files,
    one is in the ...\OC4J_Workflow_Component_Container\application-deployments\WFALSNRSVCApp
    the other is in ...\OC4J_Workflow_Component_Container\application-deployments\WFMLRSVCApp
    3. Make sure, you create back up of them.
    4. Replace the following line
    password="-&gt;pwForOwfMgr"
    with
    password="<your_wf_manager_password>",
    should be look like this
    password="a"
    5. Now start the OC4J using wfmgrstart.bat and wfsvcstart.bat
    6. Next, login to the Oracle Workflow Manager
    This worked for me.
    Hope this will help someone who has the same problem.
    Buntoro

  • Error in workflow mailer configuration - Inbound Email Server

    Hi
    I have Windows 2000 SP4.
    I have installed Oracle Workflow 2.6.3 Standalone as below
    I have installed Oracle Database 10gR1 and Oracle Workflow Server 2.6.3 in same oracle home.
    I have installed Apache HTTP Server 9.0.4 and Workflow Middle Tier in the same oracle home.
    I have finished installation and configuration successfully.
    Now I want to configure mailer parameters.
    I have started Workflow Component Container and Workflow Management Container.
    When I try to enter paramters for mailer I get error in Inbound EMail Account Server Name.
    The error says: Unable to make a network connection.
    I do not want to configure Inbound Mail Server but I need to enter these parameters as they are mandatory.
    I set Inbound Thread Count = 0 so that configuration does not consider parameters for IMAP server.
    My mail server is SMTP server.
    Any idea how to overcome this error and continue with notification mailer configuration?
    Thanks

    You would need to modify all the parameters listed in this script. This script updates each of the mailer and agent listener parameter. You may edit the script to remove all API calls OTHER THAN those for "Workflow Notification Mailer".
    Then update ALL the parameters for "Workflow Notification Mailer" with appropriate values with Inbound Thread Count to 0 and Outbound Thread Count to 1. Inbound Server Name, Account, Inbox, Discard and Processed values can be ignored. Make sure Outbound Server Name is valid SMTP Server name.
    Values like From, HTML Agent should point appropriately as per your env.
    Hope this helps
    Vijay

  • ORACLE WORKFLOW NOTIFICATION MAILER START 방법

    제품 : MFG_IP
    작성날짜 : 2003-04-22
    ORACLE WORKFLOW NOTIFICATION MAILER START 방법
    ============================================
    PURPOSE
    Notification Mailer를 background에서 running 시키고,unix account의 logging out 후에도 지속적으로 running 시킬뿐 아니라 standard output 및 error message를 각각 저장할 수 있게 workflow unix user로 workflow mailer를 start 할 수 있다.
    Explanation
    nohup $ORACLE_HOME/bin/wfmail.snd -f <config_file>
    1>mailer.log 2>mailer_err.log &
    where <config_file> is $ORACLE_HOME/wf/res/wfmail.cfg
    Alternatively, you can do the following to start the Notification Mailer without specifying the CONNECT parameter & value in the above step: Create Mailer Configuration file as the password parameter in the $ORACLE_HOME/wf/res/wfmail.cfg file is in clear text and poses a security problem.
    nohup $ORACLE_HOME/bin/wfmail.snd -f $ORACLE_HOME/wf/res/wfmail.cfg owf_mgr/password@connect_string 1>mailer.log 2>mailer_err.log &
    (Please note that even this method of running the Oracle Workflow Notification Mailer is not entirely secure in the sense that if anybody who has access to the middle-tier can always do a “/usr/ucb/ps -auxwww | grep wfmail.snd” and get the CONNECT information).
    Example
    Nohup $FND_TOP/bin/WFMAIL apps/apps@ 0 Y -f $FND_TOP/resource/ wfmail.cfg
    1> $APPL_TOP/$APPLLOG/startwfmailer.log
    2> $APPL_TOP/$APPLLOG/startwfmailer.log&
    Reference Documents
    -------------------

    제품 : MFG_IP
    작성날짜 : 2003-04-22
    ORACLE WORKFLOW NOTIFICATION MAILER START 방법
    ============================================
    PURPOSE
    Notification Mailer를 background에서 running 시키고,unix account의 logging out 후에도 지속적으로 running 시킬뿐 아니라 standard output 및 error message를 각각 저장할 수 있게 workflow unix user로 workflow mailer를 start 할 수 있다.
    Explanation
    nohup $ORACLE_HOME/bin/wfmail.snd -f <config_file>
    1>mailer.log 2>mailer_err.log &
    where <config_file> is $ORACLE_HOME/wf/res/wfmail.cfg
    Alternatively, you can do the following to start the Notification Mailer without specifying the CONNECT parameter & value in the above step: Create Mailer Configuration file as the password parameter in the $ORACLE_HOME/wf/res/wfmail.cfg file is in clear text and poses a security problem.
    nohup $ORACLE_HOME/bin/wfmail.snd -f $ORACLE_HOME/wf/res/wfmail.cfg owf_mgr/password@connect_string 1>mailer.log 2>mailer_err.log &
    (Please note that even this method of running the Oracle Workflow Notification Mailer is not entirely secure in the sense that if anybody who has access to the middle-tier can always do a “/usr/ucb/ps -auxwww | grep wfmail.snd” and get the CONNECT information).
    Example
    Nohup $FND_TOP/bin/WFMAIL apps/apps@ 0 Y -f $FND_TOP/resource/ wfmail.cfg
    1> $APPL_TOP/$APPLLOG/startwfmailer.log
    2> $APPL_TOP/$APPLLOG/startwfmailer.log&
    Reference Documents
    -------------------

  • How to configure oracle alerts to use Workflow mailer?

    Hello Guys:
    We were trying to setup oracle alerts using workflow mailer. I have created a dedicated mailer for handling oracle alerts related mail.
    Here is what I need to clarify:
    1. Having setup a new mailer for Oracle alert do I have to still configure the Options in Oracle Alerts. This is where you choose which type of mail u want to use ( like Unix mail,Windows NT mail )
    2.How do I tell oracle alert to use the new mailer that I created exclusively for this? While creating the mailer at some point I remember putting ALR in configuration form.
    I am on 11.5.10 CU2. I am on 11i.ATG_PF.H
    Regards,
    Bala

    Hi Hussain:
    Based on the note I realised that my oracle alerts will user unix sendmail. But then If u go to " Oracle Alert Options "
    -- > Mail systems -- I check Unix send mail
    -- > Mail server options ( Do I have to fill this section? )
    My guess is that the send mail will post the email to a IMAP account ( I created oraclealert account ) and IMAP account will push the alert email to Recipient
    Mail Database/Server Name --- imap.mydomain.com
    Mail Priority --- Normal
    Accounts
    Application Installation username Password
    Blank ** Blank ** oraclealert pwd
    Blank ** Blank ** oraclealert pwd
    ** - It wont allow me to choose an application.
    Is there a simple test to make sure that my oracle alert is working or not? I appreciate your help.
    Regards,
    Bala

  • URGENT: Oracle Workflow Error: API-10020 on Creation of OWB Process Flows

    I am trying to use Oracle Workflow to create Process Flows, in order to link together various mappings and components in Oracle Warehouse Builder. However, in the process flow editor window when I attempt to drag an object such as a mapping onto the editor panel, I get an error message stating the below:
    API-10020: Unable to determine if the map is a PLSQL or SQLLDR map, please correct the map or choose another map.
    All my maps are in PLSQL, and the language setting is set to this. I have tried modifying the langauge settings to see if it makes a difference but with no luck. My colleague believes this is a known bug in Oracle Workflow and there is a patch available to correct it.
    Can anyone help with this query please? Thank you for your time.

    In some versions of OWB (10.1, 10.2) The mapping property will display PL/SQL, but will actually be set to NULL in the repository (which will cause PL/SQL to be displayed as default).
    The fix is easy enough: in the developer navigator, right-click on the mapping and go to configure and set the generation language first to something other then PL/SQL (you should get an error) and then place it back to PL/SQL. This should force the GUI to reset the parameter.
    Alternatively, use OMB*Plus:
    OMBALTER MAPPING 'MAPPINGNAME' SET PROPERTIES \
    (GENERATION_LANGUAGE) VALUES ('PLSQL');
    Good Luck,
    Robbert

  • Oracle Workflow Error

    Hi,
    When I enter the username and password in the Oracle Workflow builder, I get the following error. Im able to login correctly from SQL*Plus, my tnsnames has the service name and other details. I can also execute the process flow in OWB. The only problem is in Oracle Workflow builder. Pls suggest how I can go about.
    1700: Could not connect with username/password 'owf_mgr/owf_mgr@radardev' ('ORA-12154: TNS:could not resolve service name
    Thanks in Advance,
    Regards
    Kishan

    Hi
    If you have more than one oracle homes in your system than it is possible that not in every tnsnames.ora files are configured the radardev server. Check it.
    Have you installed the workflow repository?
    Ott Karesz
    http://www.trendo-kft.hu

  • Oracle Workflow Erroring on Function/Shell Script

    We are in the process of upgrading databases and reimported all the OWB code into the new database.
    Currently our OWB mappings all seem to run ok, but when I try to run a process flow I am hitting the following error
    RPE--2075: Oracle Workflow failed to process the execution request for activity LD_EDW_MAIN:F_GET_DB_NAME. This may be because dependant objects have not yet been deployed. ORA-20010
    F_GET_DB_NAME is a function and I checked and I see that the function executes properly
    I also hit a similar error when trying to execute a shell script.
    How would I go about deploying a function or a shell script?
    Im relatively new to OWB and am being "force fed" learning since we lost our main OWB colleague.
    Thank you

    Thanks! for your reply.
    I am using this API outside the workflow.I am using this API for iExpense to approve an Expense Report. In Expenses Workflow below are the processes:
    1. AP_MANAGER_APPROVALPROCESS whihc is using NON_AME_APPROVAL_PROCESS and this is using REQUEST_APPROVAL_PROCESS and under this process there is a notification APPROVAL_REQUES. Now, I am completing this ACTIVITY as Approve and I am able to do that but problem is that REQUEST_APPROVAL__PROCESS is itself not getting completed and stuck here.
    Please let me know how can I achieve that.
    Thansks!
    Sandy

  • Error while installing Oracle Workflow

    Hi,
    While installing Oracle Workflow on Oracle9i Release 2 I am getting this error :
    Unable to find product oracle.swd.jre[1.1.6,1.1.7.27] in Oracle Inventory
    If anyone can help me on this issue.

    Amit,
    You will find workflow in the database server CD (9.0.2 and 9.2). Go to the integration and management option from the CD.
    Cheers,
    Raja

Maybe you are looking for

  • How do I recover PE 12 after hard drive failure?

    On February 25, 2014 I purchased Adobe Premiere Elements 12. The page 'my-products-services' lists it along with all of the other Adobe products that I have purchased for my Windows 7 64-bit desktop PC. I have been successful in re-installing CS6 Des

  • Printing PDF with FOP is very strange

    Hello, i have a very strange problem. My old environment Oracle 10.2 DB Apex 4.0.2 Apache FOP inside a OC4J Container My printing Report contains 9 Queries and each query is using some bind variables. We also use our own report layout That works sinc

  • Allow loaded swf's communication with the internet

    Hi, I have an air application that is loading in swfs, the swfs then intern request data from internet. For example I have one swf thats loaded into the air application that requests data from the flickr api. But I keep getting adobe air security pop

  • [SOLVED] /usr/lib/aspell-0.60/xray.cset does not exist...

    Update: I'd still like to understand what this /usr/lib/aspell-0.60/xray.cset file is all about. But apearantly I don't really need it. I fired up my xubuntu installation to spellcheck the LyX document. And because the  ~/.aspell.en.pws on Arch had m

  • Need an example about Yokogawa 7651's labview VI

    hi, highly respected gurus:            I am a new guy of labview, and now I need to use Yokogawa 7651 and Keithley 196 to make an I-V curve to perform the restistance measurment. That's to say, I need to tell tell my Yokogawa 7651 to produce an volta