Oracle9iAS Infrastructure Setup Won't Run

Hello,
I'm trying to install the Collaboration Suite on Win 2000. I installed the 9i database on the same machine without any problems. I downloaded the 3 disks for the Oracle9iAS Infrastructure, and extracted the zips. When I click on setup.exe in the Disk1 folder, a dos box comes up with the system checks, and it says they all passed. After a few seconds, that goes away and nothing else happens. I've rebooted the machine several times. Every time I try to run the installer, it creates an instance of javaw.exe in the task manager. Does anyone have any ides about how to get setup to run?
Thanks,
Chris

If not a single setup program runs, you have a severe problem and most likely it extends beyond Adobe programs even. At best you can try to download the latest Microsoft installer standalone install from Microsoft directly to repair the issue, but chances are you will indeed have to reinstall everything. Also check your virus scanners and that and turn them off.
Mylenium

Similar Messages

  • Photoshop cs4 installation setup won't run

    it won't run at all. i can only see it in my procesuses. i also tried running it as administrator but still no progress

    Tell us:
    Operating System/version
    Amount of RAM installed
    Hard drive(s) capacity
    Make and model number of video card

  • IPOD Setup won't run

    Hi all,
    I got a new Shuffle as a present and set it up to charge this afternoon. I'm two hours into the charge (yes the orange light is blinking and my PC recognizes that "new hardware" is attached) and the Setup hasn't run. How do I get this to happen? Thanks!

    Assuming you've connected it to a high speed USB port. Do you have itunes already installed on your computer? You may want to do that first.

  • Creative Cloud setup won't run?

    I keep getting a blank "we've encountered the following issues" box when I try to run Creative Cloud Setup.
    It doesn't even try to install anything it just shows this every time. I just bought CC and now I can't use it, does anyone know what I'm doing wrong?

    Hi Tabi6120,
    Please enable hidden admin account and try installing CC desktop from there: http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ .
    If still the same error then try downloading from the direct link: http://prodesigntools.com/adobe-cc-direct-download-links.html .
    Kindly follow the very important instruction before download.
    Regards,
    Romit Sinha

  • ITunes Setup won't run/open?

    i just recently bought an ipod touch, and i need to download the latest itune. after i finished downloading it, i tried opening it. the thing popped up, so i clicked RUN, but after i clicked on that, nothing happened. so i retry download the itunes again, but the same thing happened. after i click RUN, nothing seems to be appearing. so for the past two days, i've been trying to open this program, but nothing is working. i looked almost everywhere for help on the internet, but nothing seems to be working. can anyone help me, please please please??!?!

    yup yp i even created a new account and i tried to install it, but nothing happened. then i tried safe mood, and still all it happens is that when i click on the installation/setup on my desktop, a thing pops up and says RUN, and so i click it, the mouse looks like it was gonna load, but then nothing. i even went into the windows task manager, but nothing.
    do you guys know how to reboot your computer? but you still what to keep your current stuff??

  • Itunes setup won't run

    I just downloaded the itunes 801 setup. When I double click on it, nothing happens. I get the houglass for one second. I also tried to do this on my other computer, same result. Both are running XP with no known problems. I can still use itunes. I just can't open the 801 setup. Please help.

    I'm having this exact same problem. I get the hourglass for a second and then nothing.

  • OpenOffice setup won't run.

    I have a brand new install of Arch. I installed openoffice-base and openoffice-spell-en. When I run /opt/openoffice/setup "nothing" happens. I ran it under strace and something is going on but it just exits. Here's a snippet of the strace:
    stat64("/opt/openoffice/program/bootstraprc", {st_mode=S_IFREG|0644, st_size=321, ...}) = 0
    open("/opt/openoffice/program/bootstraprc", O_RDONLY) = 8
    lseek(8, 0, SEEK_CUR) = 0
    lseek(8, 0, SEEK_END) = 321
    lseek(8, 0, SEEK_CUR) = 321
    lseek(8, 0, SEEK_SET) = 0
    lseek(8, 0, SEEK_CUR) = 0
    read(8, "[Bootstrap]nProductKey=OpenOffic"..., 79) = 79
    lseek(8, -67, SEEK_CUR) = 12
    lseek(8, 0, SEEK_CUR) = 12
    read(8, "ProductKey=OpenOffice.org 1.1.3n"..., 79) = 79
    lseek(8, -47, SEEK_CUR) = 44
    lseek(8, 0, SEEK_CUR) = 44
    read(8, "Location=$SYSUSERCONFIG/.sversio"..., 79) = 79
    lseek(8, -43, SEEK_CUR) = 80
    lseek(8, 0, SEEK_CUR) = 80
    read(8, "Section=VersionsnBaseInstallatio"..., 79) = 79
    lseek(8, -62, SEEK_CUR) = 97
    lseek(8, 0, SEEK_CUR) = 97
    read(8, "BaseInstallation=$ORIGIN/..nUser"..., 79) = 79
    lseek(8, -51, SEEK_CUR) = 125
    lseek(8, 0, SEEK_CUR) = 125
    read(8, "UserInstallation=${$Location:$Se"..., 79) = 79
    lseek(8, -28, SEEK_CUR) = 176
    lseek(8, 0, SEEK_CUR) = 176
    read(8, "buildid=645m47(Build:8808)nInsta"..., 79) = 79
    lseek(8, -52, SEEK_CUR) = 203
    lseek(8, 0, SEEK_CUR) = 203
    read(8, "InstallMode=NETWORKnProductPatch"..., 79) = 79
    lseek(8, -59, SEEK_CUR) = 223
    lseek(8, 0, SEEK_CUR) = 223
    read(8, "ProductPatch=nn[ErrorReport]nErr"..., 79) = 79
    lseek(8, -65, SEEK_CUR) = 237
    lseek(8, 0, SEEK_CUR) = 237
    read(8, "n[ErrorReport]nErrorReportPort=8"..., 79) = 79
    lseek(8, -78, SEEK_CUR) = 238
    lseek(8, 0, SEEK_CUR) = 238
    read(8, "[ErrorReport]nErrorReportPort=80"..., 79) = 79
    lseek(8, -65, SEEK_CUR) = 252
    lseek(8, 0, SEEK_CUR) = 252
    read(8, "ErrorReportPort=80nErrorReportSe"..., 79) = 69
    lseek(8, -50, SEEK_CUR) = 271
    lseek(8, 0, SEEK_CUR) = 271
    read(8, "ErrorReportServer=report.service"..., 79) = 50
    lseek(8, -1, SEEK_CUR) = 320
    lseek(8, 0, SEEK_CUR) = 320
    read(8, "n", 79) = 1
    lseek(8, 0, SEEK_CUR) = 321
    lseek(8, 0, SEEK_CUR) = 321
    close(8) = 0
    open("/opt/openoffice/program/../share/config/javarc", O_RDONLY) = 8
    fcntl64(8, F_GETFD) = 0
    fcntl64(8, F_SETFD, FD_CLOEXEC) = 0
    fstat64(8, {st_mode=S_IFREG|0644, st_size=3069, ...}) = 0
    lseek(8, 0, SEEK_SET) = 0
    read(8, "[Install]rnInstallationPath=.rnC"..., 512) = 512
    read(8, "CLASSDIR>/pocketword.jar:<OFFICE"..., 511) = 511
    read(8, "openoffice-repo/openoffice/openo"..., 511) = 511
    read(8, "office-repo/openoffice/openoffic"..., 511) = 511
    read(8, "as/openoffice-repo/openoffice/op"..., 511) = 511
    read(8, "tobias/openoffice-repo/openoffic"..., 511) = 511
    read(8, "rn", 512) = 2
    read(8, "", 512) = 0
    lstat64("/opt", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat64("/opt/openoffice", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat64("/opt/openoffice/program", {st_mode=S_IFDIR|0755, st_size=8192, ...}) =0
    lstat64("/opt/openoffice/share", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat64("/opt/openoffice/share/config", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat64("/opt/openoffice/share/config/javarc", {st_mode=S_IFREG|0644, st_size=3069, ...}) = 0
    fstat64(8, {st_mode=S_IFREG|0644, st_size=3069, ...}) = 0
    close(8) = 0
    open("/opt/openoffice/share/config/javarc", O_RDONLY) = 8
    fcntl64(8, F_GETFD) = 0
    fcntl64(8, F_SETFD, FD_CLOEXEC) = 0
    fstat64(8, {st_mode=S_IFREG|0644, st_size=3069, ...}) = 0
    fstat64(8, {st_mode=S_IFREG|0644, st_size=3069, ...}) = 0
    close(8) = 0
    open("/opt/openoffice/share/config/javarc", O_RDONLY) = 8
    fcntl64(8, F_GETFD) = 0
    fcntl64(8, F_SETFD, FD_CLOEXEC) = 0
    fstat64(8, {st_mode=S_IFREG|0644, st_size=3069, ...}) = 0
    fstat64(8, {st_mode=S_IFREG|0644, st_size=3069, ...}) = 0
    close(8) = 0
    stat64("/opt/openoffice/program/setup.ini", 0xbfffee0c) = -1 ENOENT (No such file or directory)
    open("/proc/1251/cmdline", O_RDONLY) = 8
    fstat64(8, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
    mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb583f000
    read(8, "/opt/openoffice/program/setup.bi"..., 1024) = 34
    read(8, "", 1024) = 0
    close(8) = 0
    munmap(0xb583f000, 4096) = 0
    lstat64("/opt", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat64("/opt/openoffice", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat64("/opt/openoffice/program", {st_mode=S_IFDIR|0755, st_size=8192, ...}) =0
    lstat64("/opt/openoffice/program/setup.bin", {st_mode=S_IFREG|0555, st_size=261720, ...}) = 0
    access("/opt/openoffice/program/resource/set64501.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64501.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64501.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64501.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64549.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64549.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64533.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64533.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64539.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64539.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64534.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64534.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64531.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64531.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64546.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64546.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64590.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64590.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64599.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64599.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64555.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64555.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64503.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64503.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64548.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64548.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64547.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64547.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64579.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64579.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64547.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64547.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64535.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64535.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64531.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64531.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64545.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64545.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64537.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64537.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64577.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64577.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64586.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64586.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64588.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64588.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64581.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64581.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64536.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64536.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64542.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64542.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64550.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64550.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64553.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64553.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64543.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64543.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64507.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64507.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64596.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64596.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64530.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64530.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64582.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64582.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64582.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64582.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64566.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64566.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64591.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64591.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64597.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64597.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64526.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64526.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64527.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64527.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64528.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64528.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64529.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64529.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64510.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64510.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64558.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64558.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64593.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64593.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set64538.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set64538.res", F_OK) = -1 ENOENT (No such file or directory)
    open("/proc/1251/cmdline", O_RDONLY) = 8
    fstat64(8, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
    mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb583f000
    read(8, "/opt/openoffice/program/setup.bi"..., 1024) = 34
    read(8, "", 1024) = 0
    close(8) = 0
    munmap(0xb583f000, 4096) = 0
    lstat64("/opt", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat64("/opt/openoffice", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat64("/opt/openoffice/program", {st_mode=S_IFDIR|0755, st_size=8192, ...}) =0
    lstat64("/opt/openoffice/program/setup.bin", {st_mode=S_IFREG|0555, st_size=261720, ...}) = 0
    access("/opt/openoffice/program/resource/set_pp164538.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164538.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164501.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164501.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164549.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164549.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164533.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164533.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164539.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164539.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164534.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164534.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164531.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164531.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164546.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164546.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164590.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164590.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164599.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164599.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164555.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164555.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164503.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164503.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164548.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164548.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164547.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164547.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164579.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164579.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164547.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164547.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164535.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164535.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164531.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164531.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164545.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164545.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164537.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164537.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164577.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164577.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164586.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164586.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164588.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164588.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164581.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164581.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164536.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164536.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164542.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164542.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164550.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164550.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164553.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164553.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164543.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164543.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164507.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164507.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164596.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164596.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164530.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164530.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164582.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164582.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164582.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164582.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164566.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164566.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164591.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164591.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164597.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164597.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164526.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164526.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164527.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164527.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164528.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164528.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164529.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164529.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164510.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164510.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164558.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164558.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164593.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164593.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/resource/set_pp164538.res", F_OK) = -1 ENOENT (No such file or directory)
    access("/opt/openoffice/program/set_pp164538.res", F_OK) = -1 ENOENT (No such file or directory)
    exit_group(1) = ?

    the new 1.1.4 already includes a hint on that problem
    else it was mentioned in the news andf ML
    but you found the solution

  • MIDI Setup won't run

    I have an Intel iMac (early 2006) running OSX 10.6.3 with 2Gb RAM. I attempted to install Finale Songwriter 2010 over the weekend and the installation failed. Now it appears that my MIDI server is unavailable. When I try to run MIDI Setup, after about 5 minutes of spinning beachball, I get an error mesesage telling me that Setup couldn't open the Midi Server and advising me that, if I installed a new MIDI driver, to delete it and try again. I have completely removed Songwriter 2010 (including Preferences) but I am still unable to get Setup to run. I don't know what to do next and would appreciate any advice. (I have contacted Finale support and followed their only suggestion RE removing the program and trashing Preferences.) Help!
    Jeff

    Thanks for trying to help out. There is no uninstaller for Finale Songwriter but I followed the instructions from FInale and deleted all of their suggested files (program, preference, log lists, etc.) I have not midi peripherals attached (although in the past I have a keyboard and other items attached when I was running ProTools on this machine). Currently, the only things attached are keyboard, mouse, and backup drive.
    What appears to happen is that I launch Finale and it searches for a longgggg time for CoreMIDI and when it finally determines that that is unavailable, it launches and I have most of its functionality but no MIDI. When I try to launch Apples MIDI Setup, I get a message that it can't start the MIDI Server. It seems to me that the original installation of Finale did something (I don't know what) to my Mac's MIDI functionality and that is what is "broken". I know it was working before the install of Finale because I opened it and there were icons there for all my old, currently unattached, peripherals. Now there is nothing.
    Any ideas you have would be VERY welcome!!
    Jeff

  • ITunes 7 Setup Won't Run

    I've downloaded the install several times and keep getting the error:
    "The installation package could not be open. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package."
    Any suggestions?

    Same problem here... Considering in this forum the number of bad feedbacks regarding the upgrade from v6 to v7, I will skip it for the moment, until Apple stabilizes this new version. At least, with v6, I have a perfectly working setup on my Windows laptop...
    Laptop   Windows XP Pro  

  • Installed setup BUT setup won't run!

    ok so i went to the apple website and downloaded the installation wizard from the website. i have windows xp and have Symantec Client Firewall which is disabled. the installation shortcut then shows up on my desktop but when i open installation wizard, this is the message i get:
    Command line parameters:
    /L language ID
    /S Hide intialization dialog. For silent mode use: /S
    /v/qn.
    /V parameters to MsiExec.exe
    /UA<url to InstMsiA.exe>
    /UW<url to InstMsiW.exe>
    /UM<url to msi package>
    and then there's an OK button at the bottem of the window and when it is pressed, the window disappears and no installation setup starts.
    so what does it mean? and how do i fix it?!
    thanks erin

    i agree. i am thinking that installshield needs to be reinstalled MAYBE... i'm not sure though (and that probably is not the solution) but it's going to be hard trying to figure out what's wrong because it doesn't actually give an error number.
    keep in touch.
    -erin

  • Oracle 9.2 setup.exe won't run on P3 with Win2K SP3

    Hi, everyone:
    We had difficulty in installing Oracle 9.2 onto our Dell P3 Latitude C800 laptop running Win2K Professional with SP3. As many of you already reported, after double clicking "setup.exe", it won't run and nothing happened. We tried to run "autorun.exe" but that didn't work either. We also changed the system Temp/Tmp environment variables but no help either. Since our laptop is P3, not P4, not sure whether changing the symcjit.dll name would help.
    This seems to be a Java issue but not sure exactly what caused the problem. We had TrendMicro's OfficeScan AV s/w installed. Is that the problem? What other commonly used s/w are Java based and may cause conflict with Oracle installer? We only have MS Office, VisualBasic, UltraEdit, Acrobat, WinZip, and GetRight installed on the laptop.
    Are there any other suggestions for us to try? Your feedback will be greatly appreciated.
    Jason

    disable getright and try again

  • Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

    itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
    I'm on a Dell PC running Vista Home Premium.
    HELP!!!!!!!!!!!!!!!!!!!

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • Driver won't install and setup won't finish on windows 8.1 64bit

    Hi
    We have a HP PSC 1410 All-In-One installed on an old pc with windows 7 and the printer is working fine but I decided to move the printer and plug it in on my brand new ultra high end gaming pc with win 8.1 64bit on it for obvious reasons, because the pc is alot faster. Pc config: i5 2500k 4GHZ, 16 GB RAM, Nvidia GTX 970  4 GB,  you get the picture a very fast gaming pc lol.
    I downloaded the proper driver on the hp support website and started the setup and windows doesn't recognize the printer and the driver.
    Everytime I uninstall and reinstall the driver I get this error:
    It seems to be my even though HP claims that they have windows 8.1 driver support for my printer, it actually doesn't support it. Because I even tried to install it on my HP (the irony lol) laptop with win 8.1 on it and it doesn't work. I get the same problems and errors.
    So to recap it: setup won't complete, gives me an error and then uninstalls the software by itself ....
    Can anyone confirm that this specific printer model works on win 8.1? If yes, why doesn't it work on both my pc and laptop with win 8.1? Why does it only work on my old pc with win 7?
    It's really a shame because the printer (even though it's very old) is still great and I like it, I just wish it would work on my new pc.
    If anyone knows how to fix this or with a workaround please do share.
    Regards
    Elvis

    Hiya @Elvis29, 
    First and foremost, I apologize for the delay, I have been researching what could be causing this issue, and more importantly what we can do to resolve it.
    Please complete the following steps and let me know the outcome of your efforts;
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    I think in order to get the install package to install properly it would be best to unlock the admin account, then try to install again.
    Let's begin with a clean boot first; How to perform a clean boot in Windows
    How to Unlock Admin Account:
    Open an Elevated Command Prompt in Windows 8 & 8.1 (Instructions here)
    Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter
    Next, close CMD and restart your computer
    When your computer comes on log into the new account that should show. It will  be called Administrator and will not have a password on it.
    If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked
    Under the Administrator account download and install the drivers using the Printer Install Wizard.
    The Printer Install Wizard will by pass the Windows Installer. This runs its only installer or install shield, which will interact independent of the Windows Installer. This may allow the file that cannot be found, to be found and let the install finish.  HP Printer Install Wizard for Windows
    The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
    If everything installs fine, log out of this account and back into your normal user account. All the Software and Drivers for your product should show installed now on your account.
    If everything works fine, you will want to Hide the Administrator account.
    Go to your Start menu and under the 'search programs and files' box type CMD
    CMD will populate as a search option above, just right click on it and 'run as administrator'
    Once CMD (Command Prompt) opens, type net user administrator /active:no and hit enter
    Next, close CMD and restart your computer
    Please keep me posted.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Add-on won't run on some clients

    As soon as an add-on users de DI SDK, it crashes at startup on some systems and I don't know why.
    I'm using the DI Basic Operations example that came with the SDK. I build it, and used the SAP B1 SDK setup .NET Wizard to create the installer and licence file. The istallation goes fine, but the addon itself crashes. with a useless "the program has performed an illegal operation and will be shut down" error message (see below)
    I also tried other ways to run the add-on (among others directly from visual studio or from the command line, with the developer licence number as argument) but allways with the same result. At one system all goes well, at the other a crash occurs even before the debugging can start.
    I have no idea what this error message is trying to tell me:
    System.Runtime.InteropServices.COMException (0x80040154): COM object with CLSID {A355004F-AAB4-41D3-BDE0-7EAED1ED5FFF} is either not valid or not registered.
       at Project1.BasicOperations.InitializeCompany()
       at Project1.BasicOperations.BasicOperations_Load(Object eventSender, EventArgs eventArgs)
       at System.Windows.Forms.Form.OnLoad(EventArgs e)
       at System.Windows.Forms.Form.OnCreateControl()
       at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
       at System.Windows.Forms.Control.CreateControl()
       at System.Windows.Forms.Control.WmShowWindow(Message& m)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WmShowWindow(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Most of the time however, I get a much less helpfull error saying there was some unidentified illegal operation.
    Something that is possibly related is a problem with the references. On a PC where the add-on crashes I don't have the SAP DI as reference in the .NET and COM tabs, only the SAP UI. When I open an example the DI reference is reporting an error (not found) , but when I add the reference as a file, all is well. (The project now compiles with no errors or warnings, it still crashes when I start it.
    The problem already occured when only SBO was installed (which should be sufficient to run the add-on? You don't need to have the SDK installed I presume). I installed the SDK and later even Visual Studio, but this didn't help.
    I've reinstalled SBO several times (I even deleted the sbo program files directory before installing SBO again) but this didn't change anything.
    (I'm using 2004a)
    Does anyone know what could cause this problem?

    I know that, but that didn't help.
    Is there any way to find out which versions of the DI API a SBO client is currently using?
    We've re-installed the clients and DI API using the shared folder on the server, but that didn't help. (maybe some old dll was locked and couldn't be removed (without any notice of that happening) and is still being used?)
    One system indeed didn't have the DI API installed and the problem was solved a bit (my own plug-in now works fine, but the "DI basic operations" example of the SDK crashes when connecting to a company database.)
    We've now got 3 machines running my add-on without any problems (the server and 2 notebooks) and 1 notebook who won't run my add-on at all.
    The DI basic operations Example of the SDK won't run on any of the notebooks, only on the server.
    On one notebook it crashes when I click "choose company DB" (which should give me a list of available companies) on the other notebook it crashes when I try to connect to a (any) specific company database and on the third notebook it gives an empty list and won't connect to anything (but doesn't crahs)
    this is all 100% reproducable.
    All machines run the SBO client and UI add-ons perfectly, only the DI seems to cause problems.
    another weird problem that might be related, is that I need to compile my add-on as "debug". When I compile it as "release", it won't run on any of the notebooks, only on the server.

  • The latest version mozilla 6.0.2 won't run in my dekstop

    i just downloaded the latest version of mozilla, 6.0.2. however, when i try to run, after extracting, this software won't run everytime i use my name. however, if i use administrator name, it asking the password that i did'ny receive in downloading this software. how come..??

    Are you sure Firefox was closed completely, making sure the firefox.exe process was closed in the Task Manager, before starting the Flash installer?
    There are two different versions of Flash, the '''''ActiveX''''' version for IE and the '''Plugin''' version used by most other browsers.
    1.Download the Flash Plugin version setup file from here: <br />
    [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
    Save it to your Desktop.<br />
    2. Close Firefox using File > Exit <br />
    then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
    {XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
    3. Then run the Flash setup file from your Desktop.
    4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
    * On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). <br />
    See this: <br />
    [http://vistasupport.mvps.org/run_as_administrator.htm]

Maybe you are looking for