OracleAS 10g installation (please Help)
Hi All
i want a help in[b] OracleAS 10g installation
in the first step in it's installation . must install oracleAS infrastracture . in my way to install it many Errors & messages appears to me
this Errors & messages in 4 pictures to see it .. hope to find a solution for this
th pictures in this links
1- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5413
2- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5414
3- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5415
4- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5416
after pressing ignor in the forth screen many errors & messages appears to me
Oracle AS10g = 10.1.2.0.2 I presume...
However, my first questions is still valid "The questions is if you followed EVERY step outlined in the Application Server Installation Guide? If you did, then there should be no errors."
I have had similar issues when environment variables was still set during installations, ORACLE_HOME etc. You must unset those, as described in the Installation Guide, before starting an installations.
Please check these two Metalink Notes:
295446.1 "OracleCSService service may fail to start during the install of IAS 10.1.2 on Windows"
365046.1 "The Infrastructure DBCA Stops with Error "Failed to initialize OCR"
Regards,
Martin
Similar Messages
-
Oracle 10g Installation Problem on SUSE Linux 10
Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root 0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda10 2104376 73112 2031264 4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. ShroffHi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM -
SUNWsprox package with solaris 10 for Oracle 10g Installation....
Hi
I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
Thanks
Mohammed TanvirHi...
I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
Roger -
Error encounded during oracle 10g installation on mac os 10x
Hi All,
I am installing oracle 10g on my mac laptop os 10 x, I am getting the below error during execution of dbca script for db creation, I am not able to proceed further, please advice
[Thread-3] [17:11:23:18] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-3] [17:11:23:18] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-3] [17:11:23:19] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:20] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-3] [17:11:23:20] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:25] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-3] [17:11:23:53] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-3] [17:11:23:53] [Oratab.getTempFile:710] Temp oratab: /tmp/oratab
[Thread-3] [17:11:23:94] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:23:95] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=/app/oracle/flash_recovery_area
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@29da77:messageHandler
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:431] ORA-12547: TNS:lost contact
:msg
[Thread-3] [17:11:27:466] [SQLEngine.done:1966] Done called
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12547: TNS:lost contact
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1482)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:829)
at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:244)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
at java.lang.Thread.run(Thread.java:552)
[Thread-3] [17:11:27:470] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:27:470] [StepContext$ModeRunner.run:2504] oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:435)
oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
java.lang.Thread.run(Thread.java:552)
Thanks
VijayaprakashDuplicate post - Error encounded during oracle 10g installation on mac os 10x
Srini -
Is Oracle AS part of Oracle 10g installation?
I had a query that is Oracle application server a part of Oracle 10g installation? I get this doubt because isqlplus which runs on port 5560 by default has a web interface.
I hope, my question is clear.
Please revert with the reply to my query.
Regards972145 wrote:
I had a query that is Oracle application server a part of Oracle 10g installation? I get this doubt because isqlplus which runs on port 5560 by default has a web interface.
I hope, my question is clear.
Please revert with the reply to my query.
Regardsno Oracle Application Server is NOT included with DB installation -
Oracle 10g installation on Windows 7
I am currently using Oracle 10g on my laptop running on Windows Vista. Now i am planning to upgrade my OS to Windows 7. My question here, is can I use the same Oracle 10g installable to install in windows 7 also ??
is it possible ??
thanks,
JJPossible yes? Brilliant no!
Windows 7 is totally uncertified and unsupported with all Oracle products and if you have an issue there is essentially no support or patch available.
Personally I think Vista a cruel joke so my recommendation would be to go to XP SP3 which at least has the attribute of stability or move to Linux which is what I did on one of my laptops. -
Oracle 10g installation on aix 52
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/crsctl.bin because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/clscfg because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Failed to initialize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated.Would like to see the http://download-west.oracle.com/docs/cd/B19306_01/relnotes.102/b19074/toc.htm#CJAFJGIC or for linux, see http://www.puschitz.com/InstallingOracle10g.shtml.
Its trustworthy sites and my request is to delete all the files and start clean-installation again.
Revert back if any clarifications required.
Regards,
Star Nirav
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program
/dbms/oracle/10g/OraHome/bin/crsctl.bin because of
the following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
Cannot load program
/dbms/oracle/10g/OraHome/bin/clscfg because of the
following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
lize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated. -
Oracle Designer Problem Please help me
Sir,
1) I created a database
2) Run>cd d:\Oracle_home\repadm61\admin\@ckqa
@ckparams.txt
@ ckvalqa
@ ckcreate
3)Opened Repository Administration Utility
Log in as 'repos_manager/repos_manager@orcltest'
Installed Repository.
4) Opened Oracle 9i Designer. I am able to connect
as 'repos_manager/repos_manager@orcltest'
But I am not able to logon as any other user in same database/ any other user in different database. Why?
Please help me.
regards
Mathewduplicate thread, see this one -> Re: Oracle Designer Problem Please help me
-
Oracle 10g installation on xp sp2....plzzzzzzzzzzzz anyone help me
hi ....
im trying to install oracle 10g on my system(hp dv6231 eu, 1.56ghz,980mb ram 80gb hard disk) i installed xp came with vista.
when i try to install oracle , after clicking run exe....first page displays in that the option is disabled(basic installation or advanced installation). after giving password wn i click next ....thats it screen disappeared.
so i booted in safe mode with networking...... in this case different.. in first page the basic and advanced installation is enabled. so i selected basic installation and filled password.
installation started , gave me one warning abt networking parameters. i skiped that one . it went to smooth untill database creation.
in that im getting error...ORA-12560.--TNS PROTOCAL ERROR.
thats it my oracle installation over.. i been trying for last one week. i cant able to suceed . i formated my system 3 times. even i tryed with loop back adapter .
could any help me onthis plzzzzzzzzzzzzzzzzzzzz
thanking youIf you install this locally in your machine, you can try to delete the file with hosts name to resolve the error ORA-12560.
This file is located in C:\Windows\System32\Drivers.
Best Regards
Douglas Paiva -
Oracle 10g installation ora 12154 i really need help anyone
history: reinstallation, can't pass ora 12154; system windows xp sp2 problem ora 12154
Destination Folder: L:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8081
My friend, I believe you created a mess by Installing Oracle 10g Enterprise with your DHCP enable in Windows.
There are only 2 options if you want to install Oracle 10g Enterprise on Windows.
1. You install it using Static IP or not connected to network
2. You install Microsoft Loopback, it is a virtual Network driver and this should be assigned as your primary Network driver instead of your current Network.
So if you don't want any headache, the easiest way is uninstall your Oracle 10g, disable the DHCP and use static instead, then install again. that will work for sure.
Don't try to play with the listener and everything because you will get into deeper and deeper problem that end up into frustration :(
cheers
Edited by: Chubbyd4d on May 19, 2009 12:58 PM
Destination Folder: L:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8081
My friend, I believe you created a mess by Installing Oracle 10g Enterprise with your DHCP enable in Windows.
There are only 2 options if you want to install Oracle 10g Enterprise on Windows.
1. You install it using Static IP or not connected to network
2. You install Microsoft Loopback, it is a virtual Network driver and this should be assigned as your primary Network driver instead of your current Network.
So if you don't want any headache, the easiest way is uninstall your Oracle 10g, disable the DHCP and use static instead, then install again. that will work for sure.
Don't try to play with the listener and everything because you will get into deeper and deeper problem that end up into frustration :(
cheers
Edited by: Chubbyd4d on May 19, 2009 12:58 PM
clean start
================================================================================================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Parsing command line arguments:
Parameter "orahome" = N:\oracle10g
Parameter "orahnam" = OraDb10g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = N:\oracle10g\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
The information provided for this listener is currently in use by other software on this computer.
Listener start failed. Listener may already be running.
Listener configuration complete.
Default local naming configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "iSQL*Plus Configuration Assistant":
iSQL*Plus 10.1.0.2.0
Copyright (c) 2004 Oracle. All rights reserved.
Starting iSQL*Plus ...
iSQL*Plus started.
Configuration assistant "iSQL*Plus Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Configuration assistant "Oracle Database Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 2):
Configuration assistant "Oracle Database Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 3):
Configuration assistant "Oracle Database Configuration Assistant" failed
install microsoft loop back adapter okay
ip 10.10.1.1
255.255.255.0
still ora 12154
disable dhcp client on services.msc
still ora 12154
pls help
this is a fresh install
do i need to remove my oracle 10xe which is perfect working installed on a different drive
pls help me
Edited by: oraclehelper on May 20, 2009 1:45 AMDestination Folder: L:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8081
My friend, I believe you created a mess by Installing Oracle 10g Enterprise with your DHCP enable in Windows.
There are only 2 options if you want to install Oracle 10g Enterprise on Windows.
1. You install it using Static IP or not connected to network
2. You install Microsoft Loopback, it is a virtual Network driver and this should be assigned as your primary Network driver instead of your current Network.
So if you don't want any headache, the easiest way is uninstall your Oracle 10g, disable the DHCP and use static instead, then install again. that will work for sure.
Don't try to play with the listener and everything because you will get into deeper and deeper problem that end up into frustration :(
cheers
Edited by: Chubbyd4d on May 19, 2009 12:58 PM
Destination Folder: L:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8081
My friend, I believe you created a mess by Installing Oracle 10g Enterprise with your DHCP enable in Windows.
There are only 2 options if you want to install Oracle 10g Enterprise on Windows.
1. You install it using Static IP or not connected to network
2. You install Microsoft Loopback, it is a virtual Network driver and this should be assigned as your primary Network driver instead of your current Network.
So if you don't want any headache, the easiest way is uninstall your Oracle 10g, disable the DHCP and use static instead, then install again. that will work for sure.
Don't try to play with the listener and everything because you will get into deeper and deeper problem that end up into frustration :(
cheers
Edited by: Chubbyd4d on May 19, 2009 12:58 PM
clean start
================================================================================================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Parsing command line arguments:
Parameter "orahome" = N:\oracle10g
Parameter "orahnam" = OraDb10g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = N:\oracle10g\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
The information provided for this listener is currently in use by other software on this computer.
Listener start failed. Listener may already be running.
Listener configuration complete.
Default local naming configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "iSQL*Plus Configuration Assistant":
iSQL*Plus 10.1.0.2.0
Copyright (c) 2004 Oracle. All rights reserved.
Starting iSQL*Plus ...
iSQL*Plus started.
Configuration assistant "iSQL*Plus Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Configuration assistant "Oracle Database Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 2):
Configuration assistant "Oracle Database Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 3):
Configuration assistant "Oracle Database Configuration Assistant" failed
install microsoft loop back adapter okay
ip 10.10.1.1
255.255.255.0
still ora 12154
disable dhcp client on services.msc
still ora 12154
pls help
this is a fresh install
do i need to remove my oracle 10xe which is perfect working installed on a different drive
pls help me -
OracleAS 10g Installation Problem on RedHat AS 3.0
Hi
I need to install OracleAS 10g on RedHat AS 3.0 and it seems that I need a patch (Patch 3006854) and the installation is impossible without it.I just started using oracleAS 10g and I dont have any metalink id.
I think something is wrong here.
a free trial version with a commercial patch !!!
can any one please help me out.
regards yashardear fredrik
I tried to install it according to the installation guid on http://www.oracle-base.com/articles/10g/OracleAS10gInstallationOnRedHatAS3.php as you see it asked for installation of a patch.
and yes I tried to install it without installing this patch and I got an error saying that I am missing a file named ld.so in /etc.I thought it might be connected to that patch.
beside when I was looking for the solution to my problem I saw many people having the same problem and asking the exact same question.
please notify about any solution that you think might help me solving this problem. I am in a hurry
regards yashar -
Error while Oracle 10g Installation suse linux
Hi,
All i am facing issue while installing Oracle 10g release 2 on open suse.
All test are getting passed but getting a error reltated to ip address as follows.
INFO: Checking DetectIfDHCPAssignedIP
This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
INFO: Detecting the IP.....:10.31.215.64
INFO: Checking the network interface display name.... :eth0
INFO: Checking the network reference name..... :eth0
INFO: Checking the platform .......46
INFO: Checking the LINUX vendor .... :SuSE
INFO: Check complete. The overall result of this check is: Not executed <<<<
Also while installing getting error as,
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public
IP addresses. However, the primary network interface on the system should be
configured with a static IP address in order for the Oracle Software to function
properly. See the Installation Guide for more details on installing the software
on systems configured with DHCP.
Please help me to resolve issue.
BR,
Rajesh
Edited by: Rajesh.Rathod on Dec 20, 2010 12:52 AMHi,
I tried to follow each step of oracle documentation but network configuration requirement is failing.
please find following log.
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9
Actual Result: SuSE-9
Check complete. The overall result of this check is: Passed
=======================================================================
Checking operating system package requirements ...
Checking for make-3.79; found make-3.81-128.14. Passed
Checking for binutils-2.14; found binutils-2.19.51-10.26.4. Passed
Checking for gcc-3.2; found gcc-4.4-4.2. Passed
Checking for libaio-0.3.96; found libaio-0.3.104-144.2. Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking kernel parameters
Checking for semmsl=250; found semmsl=1250. Passed
Checking for semmns=32000; found semmns=32000. Passed
Checking for semopm=100; found semopm=100. Passed
Checking for semmni=128; found semmni=256. Passed
Checking for shmmax=536870912; found shmmax=3294967296. Passed
Checking for shmmni=4096; found shmmni=4096. Passed
Checking for shmall=2097152; found shmall=2097152. Passed
Checking for file-max=65536; found file-max=131072. Passed
Checking for VERSION=2.6.5-7.201; found VERSION=2.6.31.5-0.1-desktop. Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000. Passed
Checking for rmem_default=262144; found rmem_default=4194304. Passed
Checking for rmem_max=262144; found rmem_max=4194304. Passed
Checking for wmem_default=262144; found wmem_default=262144. Passed
Checking for wmem_max=262144; found wmem_max=262144. Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Recommended glibc version
Expected result: ATLEAST=2.3.3-98.28
Actual Result: 2.10.1-10.4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 5460MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking available swap space requirements ...
Expected result: 5460MB
Actual Result: 10244MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Please suggest how to resolve. -
Error in Oracle 10g Installation windows 2000 advance server
Hi,
I am facing error message below when try 2 install oracle 10 in my work station . Already 8i and 9i with forms and reports was there in my machine. The follwing error display in log file.
Actual Result: 4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 503MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
After given an ip address and proceeded. This error message is displayed in trace file:
Shutting down instance: further logons disabled
Mon May 07 11:32:09 2007
Stopping background process CJQ0
Mon May 07 11:32:09 2007
Stopping background process MMNL
Mon May 07 11:32:10 2007
Stopping background process MMON
Mon May 07 11:32:11 2007
Shutting down instance (immediate)
License high water mark = 1
Mon May 07 11:32:11 2007
Stopping Job queue slave processes
Mon May 07 11:32:11 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Mon May 07 11:32:16 2007
alter database close normal
ORA-1507 signalled during: alter database close normal...
The error message in udump trace file is as follows:
Dump file e:\or10g\product\10.2.0\admin\or10g\udump\or10g_ora_2340.trc
Mon May 07 11:26:03 2007
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows 2000 Version V5.0 Service Pack 4
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:4M/503M, Ph+PgF:9M/1327M, VA:1740M/2047M
Instance name: or10g
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 2340, image: ORACLE.EXE (SHAD)
opiino: Attach failed! error=-1 ifvp=00000000
There is no pfile or anything in admin directory. Kindly help me in installing 10G for testing please
efshafiSolution : Install and Configure Microsoft LoopBack Adapter:
Installation of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Add Hardware and then Click Next.
3. Click Install the hardware that I manually select from a list, and then click Next.
4. Click Network adapters, and then click Next.
5. In the Manufacturer box, click Microsoft.
6. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
7. Click Finish.
Configuration of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Network and Sharing Center.
3. On the left side of the Window, Cick Manage Network Connections.
4. You will find a name like "Local Area Connection 4 Unidentified Network Microsoft Loopback Adapter".
5. Right Click on it and select Properties.
6. Then Click on Internet Protocol Version 4 (TCP/IPv4) and then again click Properties.
7. Click on Use the following IP address and enter 192.168.1.10 for the IP Address and 255.255.255.0 for the subnet mask.
8. Click OK.
After this you can continue with the installation of the Oracle 10g again. -
Oracle 10G Installation in Linux
Hi,
During the installation of Oracle 10G in Red Hat 5, we are facing the below issue.. Please give suggestion on this problem..
"Error in invoking target 'client_sharelib' of makefile /home/oracle/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/home/oracle/oracleinventory/logs/installAction2010-08-31_06-41-10PM.log for details"
Thanks,
Suresh Bommalata.install glibc-devel.rpm and also check required rpms.*
# From Enterprise Linux 5 Disk 1
cd /media/cdrom/Server
rpm -Uvh binutils-2.*
rpm -Uvh elfutils-libelf-0.*
rpm -Uvh glibc-2.*
rpm -Uvh glibc-common-2.*
rpm -Uvh libaio-0.*
rpm -Uvh libgcc-4.*
rpm -Uvh libstdc++-4.*
rpm -Uvh make-3.*
cd /
eject
# From Enterprise Linux 5 Disk 2
cd /media/cdrom/Server
rpm -Uvh compat-libstdc++-33*
rpm -Uvh elfutils-libelf-devel-*
rpm -Uvh glibc-headers*
rpm -Uvh glibc-devel-2.*
rpm -Uvh libgomp*
rpm -Uvh gcc-4.*
rpm -Uvh gcc-c++-4.*
rpm -Uvh libaio-devel-0.*
rpm -Uvh libstdc++-devel-4.*
rpm -Uvh unixODBC-2.*
rpm -Uvh unixODBC-devel-2.*
cd /
eject
# From Enterprise Linux 5 Disk 3
cd /media/cdrom/Server
rpm -Uvh sysstat-7.*
cd /
eject
also check and confirm,not installing Oracle 64-bit on 32-Bit OS ?
hope, this helps you,
Regards,
Rajesh -
Oracle 10g Installation issue on Windows 7
Hi,
I tried to install Oracle 10g downloaded from the below link on my laptop which runs in Windows 7.
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
The Oracle version is 10g release 2 for windows 7. I got this DB version no. for Windows 7 from this forum only. But still, I got the error message stated below and unable to install 10g.
------------------------------------------------------ Error --------------------------------------------------------------------------
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0 . Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files (x86)\Oracle\Inventory\logs\installActions2010-10-22_07-37-48AM.log
Please press Enter to exit...
------------------------------------------------------ Error End -------------------------------------------------------------------
Could you please let me know how I can fix this issue? Or is there any other oracle 10g release/patch to fix this issue? I need to install only Oracle 10g and not 11g.
Also, I need to install Oracle Forms 10g too.
It would be great if you could guide me on installing these two softwares in my laptop.
Your help will be very much appreciated.
Thanks,
Arun
Edited by: 804404 on Oct 22, 2010 7:52 AMWelcome to the forums !
This issue has been discussed many times before. Pl use the search feature. The only versions supported in Win 7 (Professional or higher) are 10.2.0.5 and 11gR2. 10.2.0.5 is only available on My Oracle Support, while 11gR2 can be downloaded for free from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Re: Oracle for Windows 7
Re: which version of oracle works on windows 7
HTH
Srini
Maybe you are looking for
-
Function modules in CRM (read Business Partner attributes)
Hi, I would like to print a document in wich will be Business Partner attributes and other crmdata. Does anybody know how I can read the Business Partner marketing attributes. Can I use for this some function modules or else? Are there some documenta
-
I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?
-
Where do you add artwork?
In the previous iTunes with a cover graphic in the lower left corner, when you import a new album that square very helpfully says "Drag Artwork Here". Once there was a picture there we could copy and paste to other tracks very easily. I remember when
-
Would any one of you please tell me how to increase the Report engine and Que No Clearly Because i am not familiar with formserver configuration,Very urgent Please....
-
I just tried updating my iPhone 4 to ios 6. It told me that I need to store my phone and update it but every time I try to update it, I get the -1 error message...can someone help me out?