Order n billing with diff values

Hi Friends
In order JIN2 should calculate 12% on 0.50,so it should be 0.06, but its giving 0.03, but in billing its having the correct values.wre mite be discrepencies happened.give me some hints so that i can xplore.TAXINJ procedure

Hi Srikanth,
I believe the system is calculating 6% rather than 12%, and the same is determined at the time billing with 12% which is correct.
Pls. check and understand if you have maintained any routines against this condition type in the pricing procedure. I think there could be some problem with the calculation formulae.
Also, check the master data if required.
Let me know if you need more details on the same.
Regards,
Sreekanth

Similar Messages

  • Order related Billing with Billing Plan

    Hi Gurus,
    I have a scenario in which I have to create an Order Related Billing Document.
    I have the following settings for Item category in VOV7:
    SD Item Cat: ZFCI
    Billing Relevance:I
    Special Stock:W
    Billing Plan:ZP
    When I save the Sales Order, I expect this sales document number to be present in Billing Due List (VF04).
    Could you please help me in resolving this scenario.
    Regards,
    Oritra

    Hi Laura,
    Thanks a lot for your reply. Seems like there is some issue in calculating the Net Value in Billing Plan tab. When I see Condition tab, I am able to see the value (Attached Screenshot of Condition TAB).
    Could you please guide me, what needs to be done so that "Net Value" gets populated in "Billing Plan" tab.
    regards,
    Ori

  • "Glitch" with order -- Double billed with no confirmation

    Tried to place an order, for 2 copies of
    Theatrhythm Final Fantasy Curtain Call: Limited Edition
    but got a message that there was a glitch during checkout.
    Tried again and got the same message.
    Looking at my email, I have 2 pending charges on my credit card for $25.03 (had partially paid with a gift card balance of ~$8).
    It's been about 25 minutes but nothing is showing up in order status (the page doesn't even load properly).
    The site currently won't even let me access my cart.
    The gift card balance page isn't loading properly either, so I can't check to see if there's anything left on the gift card.
    Placed quite a few orders this week, but this has been the worst black friday experience I've had this year.

    Hi TimTucker,
    I truly am sorry you experienced this glitch twice causing you to have two authorizations put onto your account without orders being created. These are merely authorizations, and should fall off your account, if they already haven’t.
    Are the funds still gone on this gift card? Did the authorizations fall off your account?
    Thanks for posting,
    Allan|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • Is it possible to create purchase order with zero value ?

    Is it possible to create purchase order with zero value ?

    Hi,
    There are two scenarios where the purchase order is created with zero value.
    1. Standard Purchase order with Free tick indicator.
    Whenever we expect a material with free of cost from vendor, we use to put the free indicator in item overview.  This means the material is valuated at zero price irrespective of price control in material master. Quanitiy is updated while receipts.
    Conditions tab in item detail doesnt appear.
    2. Consignment PO.
    While creating a purchase order for consignment, the system doesnt ask us the price and the condition tab doesnt appear in item detail.
    An info record for consignment must be maintained before making the GR.
    Hope i have clarified.  If you want any further clarification. please do reply.

  • PGI check in an order related Billing

    When I do an Order related Billing in VF01, TAO item category does not have any check on whether PGI is done or not?
    I need to establish the control on it.
    Any Exit?
    Pleasea give ur valuable suggestions.
    Regards,
    Anbu

    Hi,
    Here is a proposal of customizing activities to achieve this: 
    1. Create a new item category as a copy of the normal item category used for non-prepaid
       sales. (Change the billing in the item category to order related billing with no billing plan) 
    2. Create a new item category group "ZXXX" or something of your choice with the
       description "Prepaid" or something like that. 
    3. In item category assignment, add or check entries so that you have the order type used,
       and item category group defaulting the new item category. 
    4. Check copy control from sales document to billing document for the new item category.
       Also delivery copy control could be good to check. 
    5. Create a new distribution channel and assign it to the company structure (plant, sales
       org etc) 
    6. Extend your material(s) with views for the new distribution channel and enter the "ZXXX"
       item category group in the field for sales item category group.
    Now you should be able to create a sales order with the new distribution channel where the new item category is defaulted. Check that the sales order is completed when both billing and goods issue for the delivery is posted.
    If not check the completion rule in the new item category. 
    hope it works.
    Siddharth.

  • Difference between delivery related and order related billing

    Hello Friends,
    Kindly explain the difference between delivery related and order related billing with an example. Thanks

    The billing relevance is controlled by item category of material, which u have assigned to sales document type.
    For example
    1.item category –TAN
    Billing relevance is –A- Standard-Delivery-related billing document
    So in standard order of material which has to get delivered, we will bill it on its delivery. So billing relevance is delivery related billing.
    2.BVN
    In cash sales item category is BVN whose billing relevance is Relevant for order-related billing - status acc.to order qty.
    So here we will bill the customer from sales order only, no need to go to delivery.
    DON’T FORGT TO REWARD POINTS IF THIS ANSWER SATISFIES YOU.
    Thanks
    Tushar
    SAP SD, SAP BI
    09822984340

  • Order related billing for manufacturing

    Can anybody explain to me the effects of order-related billing in manufacturing? What if deliveries is not the same as sales order. Or should i just make another order type for this?
    Thanks in advance!

    Dear Joker,
    -->Why you want to go for sales order related billing with out delivery reference !!
    -->Are you not creating any delivery after sales order !!
    -->Delivery is entirely different from sales order.
    -->As per the satnsard service related activities will be billed with reference to the sales order because here there will not be any physical movement of goods.
    -->When ever there is physical movements of the goods you need to create delivery.
    -->When ever there is delivery you better to create billing document with reference to the delivery.
    I hope this will help you,
    Regards,
    Murali.

  • S order to billing

    Hi,
    Without creating delivery can we do sales order to billing.If it is possible please give me the customization process of sales order to billing.
    Thanks,
    Rashmi.

    Hi,
    It is possible to have a order to Billing.
    Eg.For a service industry,where in delivery does not come in to picture.
    Following are few configuration that are required for Order to Billing with out delivery.
    1.Go to document control (transaction code vov8 then select under billing as F1 as default billing type.
    2.Go to item category screen control(vov7)select billing relevance as 'B'.
    Regards,
    Anand.

  • Order and Billing

    Hi,
    i have a one requirement like i need  order and billing withe reference to that order number, with reference to that invoice excise invoice here there is no delivery is it possible in standard sap.
    Regards,
    Kiran.

    Hi Kiran,
    This the Order Related billing scenario.
    Create New sales document type. Maintain delivery type as well as Delivery rel. billing type as blank.  Maintain Order rel billing   type say F2. Maintain required copy control.  You need to maintain all the required config related to CIN.Then based on billing document number , you can create the excise invoice using tcode J1IIN.
    We have similar requirement and used above setup.
    Hope this will help.
    Regards,
    Sanjay
    Edited by: Sanjay Kane on Jul 6, 2011 9:13 AM

  • Different value in sales order and billing document for one line item

    Hi Experts,
    User created a sales order with three line items say line item 10, line item 20, line30 and he did the delivery and billing also. Line item 10 value is 5024.26 EUR in Sales order
    At the time of billing the value of a line item 10 is increased by 0.02 i.e. 5024.28
    I asked the user cancel that invoice and the post goods issue. He cancelled the invoice and post goods issue. Then he created the PGI and billing now the value of line item decrease by 0.01(5024.27) again he cancelled the invoice and post goods issue. he created the post goods issue and billing. Now the value is correct i.e. 5024.26.
    User is asking me the reason can any one help me in this
    Note: price is copying from delivery to billing

    Morning Sunina
    Now consider this scenario
    Item a - 10
    Item b - 20
    Item c - 30
    and the validity of condition rec for item C is 31st of Jan
    after 31st JAN the record changes or there isn't any.
    In Copy control the pricing type is 'B' i.e., carry out new pricing.
    Now if the document is created in January it will take all the above prices. and this document is then billed in Feb. Now the copycontrol, whilst copying the prices, will predetermine the same.
    Now your task is to check if there was user intervention, check the pricing in order and check what condition types got affected in order and in billing.
    If your scenario is still not amongst the above cases...
    I don't know what to do, if you figure out please let us also know, god know when we would face the same scenario....
    Take care

  • Item Number is Differ from Order to Billing

    Hi Experts,
                        I am Creating the Order relavent billing scenario with milestone billing plan. My sales order consists of three items like
    item no.        material            Item category                                                          Billing relevance
    1                   Material1         milestone billing plan item category                                 I
    2                   Material2        service item category (TAD)                                           B
    3                   Material3        service item category (TAD)                                           B
    In Billing it will reflecting as
    item no.        material            Item category
    3                   Material1        service item category (TAD)
    5                   Material2        service item category (TAD)
    4                   Material1         milestone billing plan item category
    Item number increment is 1 in sales Document, Please help me regarding why these item number are shuffling from order to billing and the material numbers, quantity and value are copying correct only
    help me regarding this issue
    thanks & Regards
    madhusudhan

    Thanks for your replay I maintained tick mark in copy control  copy item number,In  sales order two different item categories like milestone item category and service item category for this scenario i am getting this problem in other service scenario it is copying correct only
    regards
    madhusudhan

  • Standard report for leading prod. order with variance  value  & qty.

    Hi Gurus,
    I am searching for  a standard Tcode to get the variance value/Qty against all the leading production orders which are settled in a particular period.
    Note: If a leading production order contains more than one sub orders then the qunatity of sub orders should merge with the leaing order and all the variance from individual sub orders should also merge with the leading production order.
    Please suggest the tables and fileds are used for storing the leading and non leading production order and its corresponding Planned/Actual and Variance values.
    Please guide me.
    Regards,
    Ramakant.

    Hi,
    Thanks for your early response.
    Actually i am unable to use tcode: KKBC_ORD rather able to use KKBC only.
    Using KKBC (Target/actual/production variance) and activating collective order from setting option only able to see the details for a particular leading production order only relating toa  particular period .
    My requirement is to display all the production orders settled in a particular period along with (Material code /order number/ Qty/Actual value and variance value).
    Note: If any leading order exists then that should be collective order i.e.(value and Qty should come against the leading order number).
    If there is any standard tcode exists please let me know else provide the tables and logic to bui;d up such a report.
    Regards,
    Ramakanta

  • How to Create Excise Invoice (J1IIN) with order related billing document

    Dear Experts,
    Is it possible  to Create Excise Invoice (J1IIN) with order related billing document? How? please guide
    Regards
    BK GAIKWAD

    Sir,
    We have make the supplementary Invoice (Debit Note) as per below process
    1) Create sales order_VA01
    2) Create billing document_VF01_with reference to sales order
    3) Create Excise Invoice With J1IS (Other Movement) It is manually job & due to heavy work load (create 200 invoice  per day) it is not possible to do manually.
    Hence we want to create excise Invoice with J1IIN instead of J1IS, any alternative solution for that?
    Regards
    BK GAIKWAD

  • Extra accouning line item in billing document with zero value

    Hi,
    I am using TAXINN procedure, the following accounting document has been generated during billing.This accounting document contains an extra line item with zero value.
    However, There is no necessary for this line item with zero value. Can you tell me how to remove this line item?
    000       50          VAT Payable                       A0             0.00
    001       01          Sale within state                 A0      1,212.00
    002       50          Sales f/goods-Dome.          A0      1,000.00-
    003       50          ED Collected Clr.                 A0          160.00-
    004       50          ED Collected Clr.                 A0              3.00-
    005       50          ED Collected Clr.                 A0              2.00-
    006       50         VAT Payable                      A0            47.00-
    Thanks,
    Kanhu

    Hi
    Check if there is any summarization active for billing documents generated through SD. The path for the same is:
    IMG>Financial Acxounting>General Ledger Accounting>Integration>Sales & distribution
    Check for table VBRK
    Regards
    Sanil  K Bhandari

  • Purchase order with Freight Value

    Dear All,
    My scenario is....
    I Purchase some material to my x vendor. when he send the material , he charge freight amount on it. now please suggest me how to create a purchase  order with freight value & I want to take freight effect on every material. vendor is not divide freight amount on every material. now what will i do. If i take this effect only one material than My material map get change. How to take this effect on every material.
    Regards
    Vimal

    Hi,
    When vendor send material , vendor send firght value invoicce, means at the time of PO you don't know it,so it can be consider as unplanned delivery cost in SAP and you can post this cost in MIRO ,on details tab in unplanned delivery field.
    In following path you can decide where this value should add in material cost or G/l account in following path
    In SPRO ,Maintain settings as shown  MM---> Logistic Invoice Verification -->Incoming Invoice --> Configure How unplanned delivery costs are posted
    Regards
    Kailas Ugale
    Edited by: kailasugale on Dec 14, 2011 10:21 PM

Maybe you are looking for

  • ADOBE Photoshop CS2 with a Nikon D70

    In Photpshop CS (WINDOWS XP SP2), under File --> Import, I've seen screen shots with both "WIA" and "WIA D70" options. How does one install the later and will it directly import both Mass Storage (MS) and Nikon PTP directly from the D70 (or have I mi

  • How to handle a comma in a field in CSV file during FCC ?

    Hi, I am having a requirement where we have to convert a CSV file into XML using File Content Conversion . The issue is one of the field in the file is having a comma inside. So the XML parser is taking it as a field separator and throwing an error.

  • Excise Group is not appearing in SNUM / J1I9

    Hi SD Experts, I have maintained an Excise Group XX in the basic settings [IMG Logistics General  Tax on goods movement  India]. I wanted to assign a number range for this excise group XX. When I tried to assign a number range for the object J_1IR

  • How to boldface the header for ONE column

    hi, I want to know how to boldface the header for ONE column. The following will boldface the header for all the columns in the table table.getTableHeader().setFont(new java.awt.Font("Dialog", 1, 12)); Thanks. Jrabi

  • Subcontracting PO - GR/IR difference

    Hi Masters, When users do a GR to a subcontracting PO for the price maintained, an additional FI document with small price is created which is actually equal to the price of the posting resulted through movement '543' (price of subcontracting materia