Order of Attributes in InfoWindow and Dynamic Pies

I use the following SQL select in a JDBC Query:
SELECT o.geom, k.kundennummer, a.NAME Name, a.STRASSE Straße, a.LAND || '-' || a.PLZ || ' ' || a.ORT Ort, '', d.SALDO || ' EUR' Umsatz
I'm trying to use this sql select for two things:
1. Showing a InfoWindow with all of the attributes (in this specific order)
2. Use the column 'Umsatz' for a dynamic pie.
Unfortunately the dynamic pie always use the column kundennummer. Ok, if I will change the order of the column in the select statement, the pie uses the correct column, but that is not the order I want to use in the InfoWindow.
Another problem is that the pie can't use the composited column 'Umsatz' at all. Or I am wrong?
Best regards,
Michael

Check the link
Oracle Maps - MVPieChartStyle example
maybe you can get additional information's.
I think the pie Column is configurable in the code by using the parameter label_column.
Try it.

Similar Messages

  • Extended receiver determination and Dynamic attributes

    Hello,
    is it possible to access dynamic attributes within an extended receiver determination? Can I modify / set dynamic attributes of an XI message within an UDF in the extended receiver determination mapping?
    In detail: In my scenario I want to use an extended rec. determination, make a lookup in a DB inside the determination in order to define the receiver, and based on the lookup result I want to add some information as dynamic attributes to the XI message, which then can be accessed in the interface determination as conditions.
    Thanks,
    Chris

    Hi,
    In my scenario I want to use an extended rec. determination, make a lookup in a DB inside the determination in order to define the receiver, and based on the lookup result I want to add some information as dynamic attributes to the XI message, which then can be accessed in the interface determination as conditions - See you can do a DB lookup in a msg mapping........but by the time you have reached msg mapping your receiver determination will be done......so  your receiver is already decided............Extended recever determination is for dynamically choosing a recever based on source msg's data.........
    Regards,
    Rajeev Gupta

  • Minimum and Multiple Order Qty attributes by product

    What are the options for managing Sales Order Multiples. Would like to have the option of setting required or optional quantities. For example, Product A is shipped on a pallet with 12 units. Would like orders to be managed as 12, 24, 36 etc. In other words, the 12 would also become an order minimum. In some cases this should be mandatory. Is this an item master field? If not, how is it normally managed? As an added bonus, the ability to flag these multiples as mandatory for only certain customers or sales channels would be better still. Any ideas?
    Thanks,
    Chris

    Hi,
    This is the definition of your questions:
    Order Multiple u2013 you can set a multiplication factor for ordering the item e.g. in
    case you define 5 in this field and14 items are required, the MRP will recommend to
    order 15 items (3X5=15). If 18 items are required, the recommendation will be to
    order 20 items (4X5).
    Minimum Order Qty u2013 you can type a minimum quantity for ordering items by the MRP.
    The planning data is apply when there is a requirement (sales order, forecast, production orders (for the child item) and reserve invoice.
    JimM

  • FlexConnect, EAP-TLS and dynamic VLAN assignments

    I need to integrate Cisco ISE and WLC5508 with FlexConnect (local switching) using EAP-TLS security for wireless clients across multiple floors (dynamic VLAN assignments based on floor level). The AP model used is 3602.
    I have some questions:
    - What RADIUS Attribute can be used for dynamic VLAN assignments based on floor level? Is there an option where I can group all LWAPs in same floor for getting certain VLAN from ISE?
    - I intend to use WLC software version 7.2 since 7.3 is latest version. Has someone use WLC software version 7.3 without any major bugs/issues pertaining to FlexConnect and EAP-TLS?
    - I read some documents saying L3 roaminig is where the associated WLC has changed. However if user move to different subnet but still associated to the same WLC, would this be consider as L3 roaming too?
    Can someone assist to clear my confusion here? any reference url for layer 2 and layer 3 roaming details is appreciated. Thanks

    I'll give this a shot:)
    For radius vlan attributes, bothe ACS and ISE in the policies have the ability to just enter the vlan id in the profile. You can either do that or use the IETF attributes.
    The RADIUS attributes to configure for VLAN assignment are IETF RADIUS attributes 64, 65, and 81, which control VLAN assignment of users and groups. See RFC 2868 for more information.
    64 (Tunnel-Type) should be set to VLAN (Integer = 13)
    65 (Tunnel-Medium-Type) should be set to 802 (Integer = 6)
    81 (Tunnel-Private-Group-ID) should be set to the VLAN number. This can also be set to VLAN name if using a Cisco IOS device (excludes Aironet and Wireless Controllers however).
    You can find this by searching on Google.... A lot of examples out there
    v7.2 and v7.3 I have had no issues with, with any type of encryption used. With 7.0 and 7.2, I would use the latest due to the Windows 8 fix.
    Layer 3 roaming is what's going to happen if the AP's are in local mode. This means that the client will keep their IP address no matter what ap they are connected to and or WLC as long as the mobility group is the same. So a user who boots up in floor 1 will keep its IP address even if he or she roams to the 12th floor and as long as he or she didn't loose wireless connection.
    FlexConnect you can do that. The AP's are trunked and need to have the vlans. So what your trying to do will be disruptive to clients. When the roam to another floor ap that is FlexConnect locally switched, they will drop and have to re-associate in order to get a new IP address.
    Hope this helps.
    Sent from Cisco Technical Support iPhone App

  • SAPScript and dynamic tray selection

    Hi,
    A customer of mine has 2 identical SAPScript layout sets defined with 1 minor difference - within the page attributes a different printer tray has been defined (attribute called resource name) in order to choose a different printer tray ...
    I was wondering wether this value could not be dynamically set by the SAPScript output program (when opening the layout set or using a specific command) ?
    I didn't really find any special function or parameter in the open_form function module ... I find it a shame that only for the tray functionality we have to maintain 2 layout sets ...
    Or can this be achieved in a total different way?
    Thanks,
    Steven

    I am not sure if you can change Tray attribute on a page dynamically from print program.
    But I have a suggestion, Why don't you create two pages identical in one single SAPScript just with the Tray different on each one. And call appropriate page while printing dynamically from your program using Function "CONTROL_FORM".
    Advantage in this approach is, you do not need to maintain two different SAPScripts. And all code maintenance in SAPScript is common to both the pages, so do not need to make changes twice.
    Limitation is if you resize any window in one page need to do the same on the other page too. This is still OK because usually you do not resize as often as you make changes in the code.
    Shashi Reddy

  • Pivot and dynamic SQL

    Hi Team,
    I need to write a SQL to cater the requirements. Below is my requirements:
    pagename fieldname fieldvalue account_number consumerID
    AFAccountUpdate ArrangementsBroken dfsdff 1234 1234
    AFAccountUpdate ArrangementsBroken1 dfsdff 1234 1234
    AFAccountUpdate ArrangementsBroken2 dfsdff 1234 1234
    AFAccountUpdate ArrangementsBroken2 dfsdff 12345 12345
    AFAccountUpdate ArrangementsBroken1 addf 12345 12345
    Create table test_pivot_dynamic
    pagename varchar(200),
    fieldname Varchar(200),
    fieldvalue varchar(500),
    N9_Router_Account_Number bigint,
    TC_Debt_Item_Reference bigint
    --Input
    insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken','addf',1234,1234)
    insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken1','dfsdff',1234,1234)
    insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken2','fder',1234,1234)
    insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken2','dfdfs',12345,12345)
    insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken1','dfdwe',12345,12345)
    insert into test_pivot_dynamic Values('AFAccountUpdate1','Arrangements','addf',1234,1234)
    insert into test_pivot_dynamic Values('AFAccountUpdate1','Test1','dfsdff',1234,1234)
    --Expected output:
    Select 1234,1234,'AFAccountUpdate','ArrangementsBroken','addf','ArrangementsBroken1','dfsdff','ArrangementsBroken2','fder','ArrangementsBroken2','fder'
    Select 12345,12345,'AFAccountUpdate','ArrangementsBroken','addf','ArrangementsBroken1','dfdwe','ArrangementsBroken2','dfdfs'
    Select 1234,1234,'AFAccountUpdate1','Arrangements','addf','Test1','dfsdff'
    so basically we have to pivot and dynamic sql and insert the expected output to a common table which will have all the required fields
    Thanks,Ram.
    Please don't forget to Marked as Answer if my post solved your problem and use Vote As Helpful if a post was useful. It will helpful to other users.

    This should give you what you're looking for
    SELECT N9_Router_Account_Number,TC_Debt_Item_Reference,PageName,
    MAX(CASE WHEN SEQ = 1 THEN fieldname END) AS fieldname1,
    MAX(CASE WHEN SEQ = 1 THEN fieldvalue END) AS fieldvalue1,
    MAX(CASE WHEN SEQ = 2 THEN fieldname END) AS fieldname2,
    MAX(CASE WHEN SEQ = 2 THEN fieldvalue END) AS fieldvalue2,
    MAX(CASE WHEN SEQ = 3 THEN fieldname END) AS fieldname3,
    MAX(CASE WHEN SEQ = 3 THEN fieldvalue END) AS fieldvalue3,
    MAX(CASE WHEN SEQ = 4 THEN fieldname END) AS fieldname4,
    MAX(CASE WHEN SEQ = 4 THEN fieldvalue END) AS fieldvalue4
    FROM
    SELECT *,ROW_NUMBER() OVER (PARTITION BY N9_Router_Account_Number,TC_Debt_Item_Reference,PageName ORDER BY PageName) AS SEQ,*
    FROM test_pivot_dynamic
    )t
    GROUP BY N9_Router_Account_Number,TC_Debt_Item_Reference,PageName
    To make it dynamic see
     http://www.beyondrelational.com/modules/2/blogs/70/posts/10791/dynamic-crosstab-with-multiple-pivot-columns.aspx
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Credit Management: Difference Between Static and Dynamic Credit Check

    Hi,
    Could anyone tell the difference Between Static and Dynamic Credit Check?
    According to website: http://www.sap-basis-abap.com/sd/difference-between-static-and-dynamic-credit-check.htm ... this is the answer:
    ====================
    Simple Credit Check : Tr.Code - FD32
    It Considers the Doc.Value + Open Items.
    Doc.Value : Sales Order Has been saved but not delivered
    Open Item : Sales Order has been saved , Delivered, Billed & Transfered to FI, but not received the payment from the customer.
    Static Credit Check it checks all these doc value & check with the credit limit
    1) Open Doc.Value / Sales Order Value : Which is save but not delievered
    2) Open Delivery Doc.Value : Which is delivered but not billed
    3) Open Billing Doc.Value : Which is billed but not posted to FI
    4) Open Item : Which is transfered to FI but not received from the customer.
    Dynamic Credit Check         1) Open Doc
                                                2) Open Delivery
                                                3) Open Billing
                                                4) Open Items
                                                5) Horizon Period = Eg.3Months
    Here the System will not consider the above 1, 2, 3 & 4 values for the lost 3 months.    
    ====================
    Question 1: Could you further explain the above information, if there is any?
    Question 2:: What is the Tcode to customize settings of:
    a) Simple Credit Check (isn't this same with b) below?)
    b) Static Credit Check
    c) Dynamic Credit Check

    Hi Tanish,
    Diff between Static and Dynamic Filters.
    Example One at report Level.
    Create a variable for a Infoobject say ,Material .
    1)In the Query Designer and if u restrict it to some 10 materials at query level, the report will display for only those 10 materials only.This is Static Filter.UR AHrdcoding it to those materials.You cant change them at Query Run time.i.e not changeable by user.
    2)If u give the variable as input ,and when u run the query ,u can can choose the material,may 10 may be 1 or may 20 .It is dynamic.Changeable by user at run time
    Example Two at DTP and Start Routine Level,say Document Type.
    1)If u give filters in Start routine it is Static as u cannot change it in Production,not changeable by user.
    2)f u give filters in DTP it is Dyanamic as u can change it in Production.U can give any doc type,Changeable by user at run time.
    Hope it is Understood.
    Rgds
    SVU

  • Perform static and dynamic check together on a customer?

    Hello All,
    Is it possible to perform static and dynamic check together on a customer?
    I believe standard SAP does not allow both options together.
    The scenario is: My client has customer who orders products 1 year in advance and create sales order with a future delivery date. The customer might have balance due on their account which is close to the credit limit. As a result the sale order should be blocked as if the automatic credit check is "Static". This would allow our customer service to call the customer and arrange for the payments.
    Then 11 months later, a dynamic check should be performed on the customer to make sure the past due is under the credit limit. If the past due is over credit limit, the sales order must be blocked for delivery as if the credit check was "Dynamic" with 30 days horizon. This would again give our customer service time to settle the payment with the customer.
    If anyone has implemented such a scenario, can you please give me an overview of how you did it?
    Thanks very much in advance and Text Removed.
    With Regards,
    AM
    Edited by: Lakshmipathi on Nov 13, 2010 9:23 AM
    Please dont include this text

    Static and Dynamic Cannot be Performed together. They are mutually exclusive events.
    Credit check can be performed either at Sale order level or at Delivery / PGI Level.
    FCV3 is a good report to see whether a customer would fail a credit check. ( suitable for your customer service )
    Coming to your Point , Assuming that the customer is eligible for a Credit of 50 Lacs. Now the Customer has placed an order for 60 Lacs. We set the Customer credit checking at  order level . The Customers Sale order would get blocked.
    The Customer service  will follow up for the payment and see to it that it is made. Assume the customer has made a payment for 70 Lacs.
    Now let us have a look at the account statement of the customer.
    Account Statement :     Customer Cr :  70 Lacs.   Dr   :  0.  ( because no delivery and invoice  so far has been made )  
    So we are supposed to deliver the Material worth value of 60 Lacs.
    The First sale order worth 60 Lacs has been unblocked in VKM3. Now at the time of Delivery level why would you want to chekc the Credit limit again ? It has already passed the credit check.
    It is not necessary to check credit limit . Because you have already performed the same at the order level.
    Now the customer has come again and raised another sale order for 80 Lacs. The System would block him.
    The system will never block the Previous delivery which you are, due for delivery  to the customer.
    If we keep on checking the Credits without delivering we would end up only raising in Sale orders and no Delivery to the Customer  at all. The Debit side of his account will always be 0.
    So i donot think Static and dynamic is needed . you can go for either Static or Dynamic.

  • Mixing static and dynamic content in a single outputText value causes NPEs

    Hi,
    I am having a problem and I'm wondering if it is a result of my error or if this is a bug.
    I am mixing dynamic and static content in the value attribute of tags (e.g., outputText). On initial page load, everything works fine. However, if the same view is reloaded (e.g., after a failed validation) I get an NPE from JSF:
    [#|2006-10-24T08:49:03.756-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=12;|StandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
    java.lang.NullPointerException
            at com.sun.faces.el.MixedELValueParser.getNextToken(MixedELValueParser.java:140)
            at com.sun.faces.el.MixedELValueParser.parse(MixedELValueParser.java:123)
            at com.sun.faces.el.MixedELValueBinding.getValue(MixedELValueBinding.java:60)
            at javax.faces.component.UIOutput.getValue(UIOutput.java:147)
            at com.sun.faces.renderkit.html_basic.HtmlBasicInputRenderer.getValue(HtmlBasicInputRenderer.java:82)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.getCurrentValue(HtmlBasicRenderer.java:201)
            at com.sun.faces.renderkit.html_basic.LabelRenderer.encodeBegin(LabelRenderer.java:128)
            at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:683)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:443)
            at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
            at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
            at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
            at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
            at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at javax.faces.webapp.UIComponentTag.encodeChildren(UIComponentTag.java:609)
            at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:546)
            at com.sun.faces.taglib.html_basic.PanelGridTag.doEndTag(PanelGridTag.java:460)
            at org.apache.jsp.registration_jsp._jspx_meth_h_panelGrid_0(registration_jsp.java:324)
            at org.apache.jsp.registration_jsp._jspx_meth_h_form_0(registration_jsp.java:223)
            at org.apache.jsp.registration_jsp._jspx_meth_f_view_0(registration_jsp.java:157)
            at org.apache.jsp.registration_jsp._jspService(registration_jsp.java:118)
            at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
            at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
            at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
            at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
            at sun.reflect.GeneratedMethodAccessor188.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
            at java.security.AccessController.doPrivileged(Native Method)
            at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
            at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
            at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
            at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
            at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
            at java.security.AccessController.doPrivileged(Native Method)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
            at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
            at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
            at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
            at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
            at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
            at java.security.AccessController.doPrivileged(Native Method)
            at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
            at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:326)
            at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:132)
            at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
            at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:248)
            at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
            at javax.faces.webapp.FacesServlet.service(FacesServlet.java:194)
            at sun.reflect.GeneratedMethodAccessor202.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
            at java.security.AccessController.doPrivileged(Native Method)
            at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
            at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
            at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
            at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
            at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
            at java.security.AccessController.doPrivileged(Native Method)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
            at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
            at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
            at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
            at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
            at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
            at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
            at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
            at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
            at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
            at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
            at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
            at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
            at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
            at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
            at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
            at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
            at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)My code looks like this:
    <h:outputText escape="false"
              value='<link href="#{myBean.styleSheet}" rel="stylesheet" type="text/css"  />' />If I replace this with a much more convoluted set of tags, it works:
    <h:outputText escape="false"
              value='<link href="' /><h:outputText escape="false" value="#{myBean.styleSheet}"
              /><h:outputText escape="false" value='" rel="stylesheet" type="text/css" />' />So is the problem that I am mixing dynamic and static content with a single value? If so, why does it work on the first view, and not after?
    If it matters, I'm using the reference implementation version 1.1 (as included with NetBeans 5.5RC2) on SuSE 10.0 w/ JDK 1.5_09.
    Thanks,
    Bill

    Yes, that's how I originally had it, but then changed it to the outputText approach since a single tag could do what I wanted, as long as I was allowed to mix static and dynamic content within a single value.
    I think this is a bug in JSF 1.1, since if what I am doing is illegal, it should throw an exception on the first page view, not work on first view and throw an exception on subsequent views. I'm guessing that this has something to do with the fact that on first page view it only runs the restore view and render response JSF phases, while on subsequent requests all of the phases will be run, and it's in one of those other phases that the exception is thrown.
    For now, multiple tags is the work-around, I guess.
    Thanks,
    Bill

  • Global variables for order header attributes ?

    Hi Experts,
    What are the names of the global variables that stores the values of order header attributes till the order creation ?
    Thanks!

    The attribute values are stored in the attribute columns.
    1) Open the Order header screen.
    2) Click on the DFF and check the DFF name.
    3) Query the DFF name from the sysadmin Resp, to check the columns of attributes and the pertaining value sets.

  • Variable Substitution and Dynamic Configuration

    Hi All,
    In Variable Substitution , the name that should be given the the receiver payload should be part of the Source Payload unlike the Dynamic Configuration wherein the file name can be generated dynamically during mapping.
    I have the following questions
    1.Dont we need to write the UDF for the Variable substitution?
    2.Cant we do the Dynamic configuration without writing UDF?If so then how?
    3.In Dynamic Configuration the file name is generated dynamically.But where does the file name come from if it is not the part of the source payload?
    Thanks in advance

    Hi Shwetha,
    1.Dont we need to write the UDF for the Variable substitution?
    No. Here we are accessing the contents of the payload to the target. So no UDF required.
    2.Cant we do the Dynamic configuration without writing UDF?If so then how?
    Yes and No.
    Because we can set only few Dynamic configuration  values without UDF.
    If both source and target are File, then check ASMA on both sender and receiver. Then u can get the source directory name and source file name for target also without any UDF.Also some other parameters.
    3.In Dynamic Configuration the file name is generated dynamically.But where does the file name come from if it is not the part of the source payload?
    The file name comes along with the source in the payload as a attribute in header. U can view this in SXMB_MONI, and Dynamic Configuration.
    In Dynamic Configuration the file name is generated dynamically.
    No the file name is taken as it is from the source, if u want to change dynamically that u have to do in a UDF.
    I hope this will clear all doubts,
    If nt pl post
    Babu

  • The order in attribute set is MESSED UP

    Hello forum,
    Here is an intricate description of my problem:
    When I define BRIDGE_TYPE attribute set for Discoverer the sequence of attributes often changes in attribute set without my intervention. This is especially the problem because advanced attribute properties themselves DO NOT change the order. Consequently, I am getting completely messed up. I cannot identify any possible pattern here. I observe it for both dimensions and facts attribute sets.
    What's wrong?
    Sorry for very vague description of the problem, but that's how it's going on!!!
    Another problem is sometimes on the Attribute Sets tab the button "Advanced..." is grayed out for BRIDGE_TYPE. When I move focus to the only one attribute set (BRIDGE_TYPE) and not changing anything press ok (or in some other way move out focus from the record about BRIDGE_TYPE attribute set), I get error message that only one attribute set of type BRIDGE_TYPE may exist. After I press ok for this message, the type of attribute set is automatically changed to USER_DEFINED (of course Advanced button is still grayed out). Then I press ok and open Table Properties again. There I can see two identical attribute sets but with different types: BRIDGE_TYPE and USER_DEFINED. The names of attribute sets are the same, so I have to change name of one attribute set or delete them. If I delete them and create new attribute set of type BRIDGE_TYPE, I am able to go to advanced properties and everything fine, except order problem described above. Again I cannot see any pattern here - this happened only with some of dimensions.
    Does anybody observe such a strange behavior? I'm lost and disappointed. :(
    Regards,
    Alex

    I have found a solution for ordering problem but it's realy error-prone. :(
    I have determined that order is changed only when I change advanced properties for BRIDGE_TYPE attribute set. If I change them again, the order is back to the previous state, so I can handle it with some efforts. Of course, this is not good way of doing thing, but I don't know better way to handle this.
    This trick really slows the work down! If someone experienced similar results, please, share your knowledge.
    Regards,
    Alex

  • Selecting both static and dynamic values in a report.

    Hello,
    I am using the following LOV for a select list in a form based on another post (Re: Static and Dynamic LOV ordering
    It is presenting five static values along with a dynamic LOV.
    select d, r
    from (select n, d, r
    from (select 1 as n, 'NAME_A' d, 1 r
    from dual
    union all
    select 1 as n, 'NAME_B' d, 2 r
    from dual
    union all
    select 1 as n, 'NAME_C' d, 3 r
    from dual
    union all
    select 1 as n, 'NAME_D' d, 4 r
    from dual
    union all
    select 1 as n, 'NAME_E' d, 5 r
    from dual
    union all
    select 2 as n,
    (LNAME || ', ' || FNAME || ' (' ||
    to_char(DOB, 'MM/DD/YYYY') || ')') display_value,
    ID return_value
    from my_name_table)
    ORDER BY n, r asc)
    The static display and return values do not exist in my_name_table, but the static return values are recorded in my_main_table when the user submits the form.
    The tables look like this:
    my_main_table:
    record_id
    name_id
    my_name_table:
    name_id
    fname
    lname
    How can I present the display values associated with the static return values recorded in my_main_table along with the dynamic display values in a report? I am currently presenting the dynamic portion in a report using the following select statment:
    select
    (my_name_table.LNAME||', '||my_name_talbe.FNAME) AS Name
    from my_name_table
    WHERE my_main_table.NAME_ID = my_name_table.NAME_ID
    I have the additional problem that the static return values are not in my_name_table so the join in the last statement will not find the static values in my_name_table.
    Edited by: mterlesky on Feb 24, 2009 9:51 AM

    1. You will need to add an outer join to return all the values in the Main table.
    2. Then decode the values for the static LOV.
    Something like (this is not tested, but should give you the idea)
    select
    decode(my_main_table.NAME_ID,1,'NAME_A',2,'NAME_B',3,'NAME_C',4,'NAME_D',5,'NAME_B',(my_name_table.LNAME||', '||my_name_talbe.FNAME)) AS Name
    from my_name_table
    WHERE my_main_table.NAME_ID = my_name_table.NAME_ID(+)
    This will all break if any of your static LOV ID values clash with your dynamic LOV ID values.
    I am now going to give you a long lecture about hard coding values ..... ;)
    Related info: http://simonhunt.blogspot.com/2009/02/how-to-cope-with-list-of-values-lovs.html
    I hope that helps
    Shunt

  • Spry:Content and Dynamic Spry Data

    Is there a way to get the spry:content attribute to work well
    with dynamic data generated from PHP/MySQL? I have read the
    progressive enhancement article and I am totally lost on it.
    The provided examples in the documentation deal with static
    data but there are so example of using spry:content and dynamic
    data.
    Can anyone help?
    Thanks

    Hi Arnout
    These are the urls:
    http://www.grafikkaos.co.uk/pages/front/test_home.php
    - this one displays the spry:content properly, but in the source,
    it does not show the 5 articles.
    http://www.grafikkaos.co.uk/pages/front/test_home_2.php
    - I applied a PHP repeat region here. In the source, it shows 5
    articles being shown but on page view, each title and date is
    repeated 5 times.
    Any ideas?
    Thanks

  • How to change the attributes of screen fields dynamically

    <b></b>
    well i have created a table by name empmaster_data with following fields.
    *emp_id.
    *emp_fname.
    *emp_lname
    *dob.
    *doj.
    *dept.
    *desig.
    now using a single screen i want to create,change and display the information.even i am using save and exit button.
    now i want to change the attributes of screen fields dynamically like active,input,output,invisible.

    Hi,
    Have Different Radio Buttons for the purposes what you have and use AT Selection Screen Output, Under the event Use loop at screen and with continue with your requirement.
    Hope This Info Helps YOU.
    <i>Reward Points If It Helps YOU.</i>
    Regards,
    Raghav

Maybe you are looking for

  • How do I get the contacts number to show next to their name please?

    It's my first time having a Blackberry.  I have the Curve 8520.  I've been trying to work this out for 3 days and it's driving me nuts!   What I'm trying to do is to send a text message to my contacts, informing them of my new number.  I know I can o

  • Guidelines to Organizational Changes

    Hello all, Does anybody know of any guidelines to make organizational changes. For example, an organization with 1 company code decided to split them into 2 company codes and plants and storage locations ... etc. Another example would be 2 company co

  • Dynamic Approval Group with Voting Method  First Responder Wins

    Hi all, i create new Approver Group with type: Dynamic, and Voting Method: First Responder Wins. and i write the query to get user_id. The query return the correct users, but in the approval list in the wf, it requires approval from all users in my d

  • We are unable to start your subscription for adobe photoshop cs5.1 extended subscription edition

    below this error message it says: "our servers are currently offline for scheduled maintenance. we appolagise for the delay. please try again later". i have tried it a few times over about 45 minutes. does it actually take a really long time or is th

  • Premiere pro update

    premiere proの最新アップデートが何回やってもエラー[U44M1P7]が出てしまって出来ません. Adobeのwebページから直接しようとしてもダメでした.どうすればいいのでしょうか.