Order of Message in BPM

Hi guys, i got a question regarding BPM. Does BPM will retain the sequential order of a message?
For example I am calling a storedprocedure oracle (via jdbc adapter) synchronously.
My message will contain 4 rows in sequential order 1 2 3 4. The stored procedure will return a value to XI (BPM) for each row (that is A B C D).
Does the return from the storedprocedure is also in the order of my message from BPM, that is:
For row 1, i will get an A for the return.
For row 2, i will get an B for the return.
For row 3, i will get an C for the return.
For row 4, i will get an D for the return.
Does anyone know about how XI (BPM) handle this?
I really appreciate any solution and input from you guys. Thank you very much in advance.

Wishnu
Are you sending all the rows in one instance ( Single XML file ) or in different 4 XMl files.
If they are in different XML files than you have to use the Correlation, to assign messages that belong together to the same process instance.
- Lalit -

Similar Messages

How to handle parked message in BPM?

Hi,
I have a scenario that buyer as R3 send PO(same PO number) change idoc multiple times into bpm without receiving PO change confirmation(from seller, non R3) yet, I have a loop in bpm to handle this case, the loop checks the condition whether confirmation matches change request, if not, potential loop repeats. However, if I have multiple change request(same PO number) sent from R3 to BPM, my BPM waiting for my order confirmation, then if the first order confirmation comes into BPM matches with the first change request, then I exit the loop, but I still have several change requests parked at processXXXXX yet to be processed, does anybody came into similar situations? Any good suggestions or examples?
Thanks,
Maggie

Hi there,
I need to correlate ChangeConfirmation to ChangeRequest with PO number, this is for the purpose of ChangeRequest waiting for Confirmation for the same PO number. However, I don't know how to handle multiple changes come into BPM without confirmation yet, my current design is that I immediately enter a loop in BPM, with condition confirmation Info doese not match change info, thus the change request is bundled with bpm process, once the porcess is finished(response match change request), the queue of my other change requests(the parked ones) now got deleted, does anybody have any good suggestions in handling multiple change request(for same PO number) in bpm? Is there a way I can force bpm to handle one request one response, throw some error message if multiple changes comes together without response yet? Anybody had encountered similar issues?
Thanks,
Magge

Stateful messages in BPM(Urgent)

hi,
BPM is used for handelling stateful messages.But what is the maximum no. of messages it can handle,without reducing the performance.

Hi,
Business Process Management provides SAP Exchange Infrastructure with functions for stateful message processing: The status of an integration process is persisted on the Integration Server. This means that you can specify how long an integration process must wait for further messages to arrive, for example. Furthermore, this enables you to process messages within an integration process further still; for example, you can collect certain messages and then send them in a particular order.
For Performance fine tunning avaoid having message mapping inside BPM,do it either before the BPM or after BPM
BPM is used for Stateful communications,suppose u have to delay message processing,or wait for other messages to arrive and then semd them all together,in that case use BPM.
go thru this: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
Performance is not only depend on the usage of BPM, it also depends on the message volume inside the BPM. So it depends on the memory size, message size i.e payload size , design , mapping used etc
This basically means SAP XI as a EAI tool without the BPM provides stateless message. this means that one message coming in SAP is not dependtent on another message.
BPM in SAP XI is used to make messages stateful and this allows us to do functionalities like collecting message , splitting message, waiting for a message etc.

Can I receive another message while already waiting for a message in bpm?

Hello,
I am implementing the following scenario in bpm, Allow user to send mutiple Order Change idocs amlost at the same time without a response yet, the second, third and so on idocs will be ignored, once the response comes, the first Order Change idoc will be processed, if the response does not match change request message, another order change idoc will be triggered, and all this should happen under one process instance if PO number is same, I am using PO number to corrleating response message with Order Change idoc.
I use a fork statement while wating for response after first Order Change idoc being received into bpm and forward to seller(File Adapter simulation). In branch 1, I use a infinite loop to receive OrderChange messages(ignore them), in branch 2, I use another receive step to receive Order Response message. the problem is when I an send order response , I got the following error in bpm: Unable to deleiver event Received of object ZXI_PROXY_ORDERESPONSE_0001, and I checked the trace in xi messagae monitor, it gave error: Async barrier reached. Bye-bye !
Anybody has any suggestions?
Thanks,
Maggie

Hi,
You should maitain proper queue.
go through the following links.
File-to-File Scenario Stopped Working
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
cheers,
Chandrasekhar chilla

How to receive another message while already waiting for a message in bpm

Hello,
I am implementing the following scenario in bpm, Allow user to send mutiple Order Change idocs amlost at the same time without a response yet, the second, third and so on idocs will be ignored, once the response comes, the first Order Change idoc will be processed, if the response does not match change request message, another order change idoc will be triggered, and all this should happen under one process instance if PO number is same, I am using PO number to corrleating response message with Order Change idoc.
I use a fork statement while wating for response after first Order Change idoc being received into bpm and forward to seller(File Adapter simulation). In branch 1, I use a infinite loop to receive OrderChange messages(ignore them), in branch 2, I use another receive step to receive Order Response message. the problem is when I an send order response , I got the following error in bpm: Unable to deleiver event Received of object ZXI_PROXY_ORDERESPONSE_0001, and I checked the trace in xi messagae monitor, it gave error: Async barrier reached. Bye-bye !
Anybody has any suggestions?
Thanks,
Maggie

Hi,
You should maitain proper queue.
go through the following links.
File-to-File Scenario Stopped Working
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
cheers,
Chandrasekhar chilla

Warning message is thrown,while raising a sales order Warning message:

When i am raising the sales order,warning message is thrown stating "No financial document",can any one solve the problem.

It is because, the said field (LCNUM) is made as mandatory in your settings. While creating sale order, go to header tab "Billing Document" where you can see this field. Press F4 and maintain the relevant licence reference.
It seems you were trying to create an export sale order where the terms would have been L/C. For information, to create an export L/C, the TCode is VX11N and once you give all the required data and save, system will pop up a reference. This reference number has to be assigned in sale order
thanks
G. Lakshmipathi

You cannot make an assignment to make-to-order stock - Message no. CO684

Hi,
During conversion of planned order to production order in variant configuration scenario I am getting following error message....
You cannot make an assignment to make-to-order stock
Message no. CO684
Diagnosis
The component cannot be allocated to an individual stock because make-to-order production and engineer-to-order production cannot be executed with this order.
A possible cause is that you are trying to create an order with reference to a sales-order/project, where an account assignment to a sales order/project is not allowed in the settlement profile that is assigned to the chosen order type. This is inconsistent.
System response
The following responses are possible:
Order processing is canceled.
The system resets the special stock indicator back to the original value.
Procedure
Choose another order type.
Any ideas or suggestions to correct this issue..
Pavan

Hi Pavan,
This is one of the most common problem comes during MTO execution.And the real problem is massage no itself because you will get the same massage no. for many reason and that's it becomes more difficult to find out root cause.
Check below threads and settings,
- Order type for MTO is not maintain in Production scheduling Profile.Go OPKP or CORY and maintain Order type for MTO to it.
- [Thread 1|Error Message while cretaing a Process Order;
- [Thread 2|Error in Variant Configuration CO684;
- [Thread 3|error information when covert plan order to production order;
- [Thread 4|You cannot make an assignment to make-to-order stock;
Regards,
Dhaval

Collect messages in BPM

Hi experts,
Need to create one scenario to collect payload of XML files, I have done this work in Design and Configuration :
data types : test_collect
Message Types : test_collect
Message Interfaces : Test_collect_1 (abs asy), Test_collect_2 (abs asy)
I need to collect Test_collect_1 and pass it to Test_collect_2
Message Mapping : Test_collect_1 - Test_collect_1
Interface Mapping : Test_colect_1 - Test_collect_2
Integration Process is created as example in Standard Process in SAP BASIS
--> http://sap.com/xi/XI/System/Patters --> BpmPatternCollectPayload
Need to created more mappings or not.
How I will created proper Configuration Steps,
mean no. of Sender Agreements, receiver agreements, Receiver Determinations and Interface Determinations etc.
Regards,
Study SAP

hi study sap,
check the below blogs to have a cleat understanding
Check these
BPM:
Walkthrough with BPM - Walk through BPM
BPM in XI https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/integrationProcess%28ccBPM%29inXI&
BPM-1 Walkthrough with BPM
BPM-2 Reconciliation of Messages in BPM
BPM-3 RFC Scenario using BPM --Starter Kit
BPM-4 The specified item was not found.
Schedule BPM Schedule Your BPM
Use of Synch - Asynch bridge in ccBPM Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi
Use of Synch - Asynch bridge in ccBPM https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
without BPM Sync/Async scenarios without BPM
without BPM1 Sync/Async communication in JMS adapter without BPM (SP19)
IDOC BPM IDOCs (Multiple Types) Collection in BPM
multimapping without BPM /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible---- Multi Map With out BPM
Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI. Various multi-mappings and
Optimizing their Implementation in Integration Processes (BPM) in XI.
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure --- Illustration of Multi-Mapping
and Message Split using BPM in SAP Exchange Infrastructure
IDOCs (Multiple Types) Collection in BPM (N:1 Mapping )
regards
kummari

Emulate Fault message in BPM

Hello
I have read all related topics
fault message in BPM process
Alert monitoring and fault message types
Using Fault Message Type in BPM
but no answer..
I have synch BPM that send synch request to RFC and a mapping step. Then I have to catch exception (of send step or mapping) and send fault message in exception handler.
I haven't a proxy. I want to create fault message manually and send it. Is it possible? I cannot create an interface of fault message type.

Hi Sergey,
As far as I know, it's possible to catch the mapping/send exception.
It's also easy to define an exception branch for this exception, and inside the exception branch, send a "normal" message in a send step.
However, as far as I know there's no way of specifying a BPM send step that sends a fault message.
At least in my experience, regular messages are just as useful when sending error information.
Cheers,
Ofer

Collection of messages in BPM

Hi Experts,
Collection of messages in BPM is not working,IP is executing for each Idoc.Actually i have done the sceanrio Idoc to File,Here I am getting multiple IDocs of same type from R3 when run a transaction and i would be generate a single file for all the IDocs.For this i have changed the occurence of Idoc from 1..1 to 1..unbounded and done the mapping betweeen these two. i have done bpm just like as standarad bpm pattern "BpmPatternCollectTime".I mentioned the time as 1 minute.in transformation step i had mentioned interface mapping for 1..1 Idoc to 1..unbounded Idoc and the real mapping conditions of this sceanrio is carried out after the bpm. The Idoc's are generating from R3 with the time diffrence of 3 secs.So it should generating a single file what ever the no.of idocs populating within a minute.
In monitoring it showning for bpm, its trigerring for each incoming Idoc and procesing successfully.
For Ex: Two idocs are coming from R3 then BPM triggers twice
What could be the possible reasons for this or i have done any thing wrong.
Any ideas.., Thanks in advance
Cheers
Tiger Woods.

HI,
Try to Use Idoc packaging. also see the below links
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm - collecting IDocs without BPM
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
Regards
Chilla

Multiple files, same structure into one message without BPM

Hi,
Is it possible to read multiple files (each with single row) as one message without BPM by some configuration in channel?
For example:
input files placed simultaneously in input folder:
file1: a,b,c
file2: f,g,h
file3: k,l,m
after adapter picks files, xml message:
<Message_type>
 <RecordSet>
 <file>
 <A>a</A>
 b
 <C>c</C>
 </file>
 <file>
 <A>f</A>
 g
 <C>h</C>
 </file>
 <file>
 <A>k</A>
 l
 <C>m</C>
 </file>
 </RecordSet>
</Message_type>

Bond,
Yes Bond. You can read the pattern what you have given.
First Read the whole line in the file as one record. Now take the substring or write udf in mapping. This entirely depends upon your requirement.
Regards,
---Satish

How to split messages without using Message split (BPM)

In file to file scenario how to split messages coming from file without using Message split (BPM)

Thank you very much.

How to monitor message in BPM?

Hi all
I try to find in forums but I did not find. Could you please to guide me how I can to see message content in each step in BPM.
Thanks and Regards
Park

Hi park,
To monitor messages for BPM... got transaction SXMB_MONI_BPE
there u can check each step.....
hey... check the slide....also useful......
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1db5e190-0201-0010-1c90-d9de570c6b18
Regards
Biplab
Reward with point if useful

Need help: playing songs in order, strangewindow message, upgrading I-Tunes

I have 2 situations I hope someone can help me with:
1: PLAYING SONGS IN ORDER; WINDOW MESSAGE
I have CDs of music that when I load them onto my pc laptop the song names don’t come up—each song lists as “track 01” “track 02” etc.
When I try to play the album thru I-Tunes on my laptop, the songs won’t play in order. i.e. ALL the “track 02”s will play before going to “track 03,” then ALL the “track 03”s will play, etc. So I made a playlist of each CD.
Now when I try to play the Playlist, I get a window message that says, “The song “Track 01” could not be used because the original file could not be found. Would you like to locate it?” I can choose ‘yes’ or ‘cancel.’ YES takes me to folder selections. I find the song and click on it and then it plays.
There must be an easier way. I don’t want to search for each song one at a time in order to play an entire CD in order.
2: UPGRADE
I need to upgrade. I have I-TUNES 7.0.2. I went online to apple.com and couldn’t find any upgrade option, so I clicked on “download I-tunes”. I got a window that says “download complete.” But how do I tell if it’s really installed? Where do I go on my computer to see what version number it shows?
Any help is appreciated,
Carolyn in Las Vegas

2. Help->About iTunes
1. You have done something that has confused iTunes about the location of the files in its library. Without knowing what happened, it's hard to make a specific recommendation, but if you moved your files around manually, move them back, and then, if you want to change the location, do it only by setting it in iTunes preferences and then using Consolidate Library.

Any way to change order of messages displayed?

How can the order of messages displayed be changed? Can the time and dates be removed?

SSorry there is no feature for that, so you can't change it.

Order of Message in BPM

Similar Messages

Maybe you are looking for