Orders to stay release (VKM3) even if changes are made to the order

Hi,
Is there a setting to keep the sales orders in released status once the order is release for credit through VKm3.
That is even if the order is release if you make any changes to the order it goes back to credit blocked status.
Is there any way to stop this from happenin. I want the order stay released even if any changes are made to the order once a release has been done in VKm3.
Thanks
Keshi

Hi,
Go to the transaction code OVAK,
Select the correct Credit group and risk category and enter into the features of this combination.
Here if you check the fields, you can find that there are certain fields which decides whathappens to a sales order when it is released from credit block and then some changes made.
You can configure these fields to enable your functionality. As I am in different network now, I am not able to give u the correct fields.
But as per the functionality, it should ideally block the order because the change can even be in price , that is the Credit exposure itself. Hence it should ideally block.
Hope this helps you to decide.

Similar Messages

How to not retriggered output type when changes are made in Purchase Order

Hi All,
Could you let me know how can I resolve this one?
We have a custom output type. Now this output type should NOT be automatically retriggered if a change is made to the document/purchase order. Currently the system automatically repeating the output type for every change made to the document/purchase order. But there is still an option for the user to be able to manually repeat the output.
TIA

Hi,
1.In order to restrict the output type to trigger you need to write the requirement routine in transaction
VOFM> requirements>output control.
2. create the requirement routine in application EF and write the required logic and pass the sy-subrc EQ 4 if you not require to trigger the output type and pass sy-subrc equal 0 to trigger the output type.
3. assign this requirement routine to custom output type.

Why Synonym becomes INVALID when changes are made on the related object ?

Hi all,
WHY SYNONYMS becomes invalid when changes are made on related OBJECTS ?
Is there any specific reasons for this.?
Is there any method or procedures to make the synonym VALID as soon as the we perform any alteration on the related object.
Thanks
Himabala

Synonym will be validated when it is accessed, no need to take an action.

The Change time of the file is getting modified when no changes are made to the file content

While doing save operation of a MS-WORD file, (in my example "1M.doc" ) with client (Windows 8) and server(either Win 2008 R2 or Win2012 R2). Observing the following scenario.
After Renames are done(eg, xx.tmp renamed to 1M.doc) , all the file handles are being closed one by one.
When the xx.tmp file is closed, immediately followed by Create of 1M.doc, the LastWrite time values between Close and Create are same but LastChanged time values are different. The LastChanged and LastWrite times are noted from
the Close Response and Create Response packets.
No modification is done on the file between this last close and next create. So, why LastChanged time values are different for the file? We are observing this almost everytime with Win8- Win2k8R2/Win2012R2, but not observed
till now with Win8-Win2012.

Hi,
Is only word files have the issue? You could refer to the articles below to troubleshoot the issue:
The "Modified time" file attribute of a registry hive file is updated when an application loads and then unloads the registry hive file without making any changes on a computer that is running Windows Server 2008 R2 or Windows 7
http://support.microsoft.com/kb/983544
File “Date modified” property are not updating while modifying a file without closing it.
http://blogs.technet.com/b/asiasupp/archive/2010/12/14/file-date-modified-property-are-not-updating-while-modifying-a-file-without-closing-it.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Thumbnails do not update after changed are made in the raw module?

I am editing raw files in bridge. The changes that I have made in RAW do not transfer to the bridge thumbnail page when I leave the raw module. I can see that I have made changes by the little symbols for crop etc. in the thumbnail, but no live changes. Any suggestions?

Judy Lovins wrote:
I am editing raw files in bridge…
No, you're not.
Bridge is just a file browser, it doesn't open, edit or save any files at all. It just hands the file(s) to the appropriate application, whether that be Adobe Camera Raw (ACR), Photoshop, Illustrator, Acrobat, or even MS Word.
Check your Thumbnail preferences in Bridge Preferences.

Clear IDOC creation when only header level changes are made ME22N.

Hi All,
when the PO is on changed in the header level only(for example header texts and header code) and when we execute RSNAST00 one BADI getts triggered which checks if the Item category is 9 and badi will clear the IDOC creation.
If the PO item category is = 9, the IDOC must not be created. This badi works fine if the changes are made at
1)at Item level
2)both header level and Item level
In case of 1 and 2 we have both header segment E1EDK01 and item segments E1EDP01.As a result it checks for the item category in the item segment.so idoc is not created.
3)BADI is not working when the changes are made at the header level only. The IDOC is getting created even though the PO has the item category as 9.
I found in this case only header segments are availble while debugging and the item segments are not there to check the condition for the item category.
Please any one can suggest me possible solutions to clear idoc creation when only header level changes are made ME22N.
The BADI used is as below.
DATA : lwa_data TYPE edidd.
DATA : lw_dp01 TYPE e1edp01.
DATA : lwa_control TYPE edidc.
CHECK idoc_control-rcvprn = '3PL' AND idoc_control-idoctp = 'ORDERS05'.
LOOP AT idoc_data INTO lwa_data.
    IF lwa_data-segnam = 'E1EDP01'.
      lw_dp01 = lwa_data-sdata.
      IF lw_dp01-pstyp = '9'.
        CLEAR create_idoc.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHO
Thanks in advance.

Hi all,
Is there any way that I can get the item category details when Only header level changes are made to the PO in ME22N and only header segments are available in the IDOC.
Is this possible:- Fetch the po number and item category details from ekpo table that matches with the header segment po number and then check for item category value to clear the idoc creation?
Any information is helpfull.
Edited by: Selina.selk on Nov 20, 2009 1:39 PM
Edited by: Selina.selk on Nov 20, 2009 2:49 PM

I purchased a Maxx at FULL retail price (out of contract) to keep my unlimited data. An unauthorized/illegal change was made to the plan and all VZW could do was offer me $20 in credit.

As the title says:
I purchased a Droid Maxx at full retail price (approximately $540) to keep my grandfathered unlimited data. An unauthorized/illegal change was made by my younger sister (who is not an account manager and stole the information from my mom) to the plan and I was not notified within the 14-day closing period to revert the changes. For the record, both my mom and I are account managers, my younger sister is not.
I went in to my account (and changed all the information) and found out that when changes are made to the account online, you have to send an authorization text to one of the phones--however, you can send this authorization to ANY of the phones on the plan, so my sister sent it to hers (instead of an account managers).
So, the only reason I found out about this change to my plan was via a text message telling me I was "approaching max data," which of course should not happen with unlimited data. My younger sister did not tell anyone she made the changes.
When I found out about two (nearly three) weeks ago, I called Verizon to open a ticket about it. They did, said they would call/text me back a few days later--they didn't. One week later I made another phone call to see what the status on that ticket was--the rep said that the other rep was supposed to call me, but didn't, and so he pushed the ticket again. Lo and behold, another week later, still no response from VZW about the ticket. So I called again only to find out that the request to revert the data plan back to unlimited had been denied.
I spoke with that representative for nearly 40 minutes and all she could offer was some unwanted advice about what to do about my sister's behavior or that "I'm so sorry that someone would do that." I told her I wasn't looking for consolation, but for a compromise on either getting my unlimited data back, or refunding the difference between contract and full-retail price of the phone. I threatened to leave VZW because of this and all she could offer was a measly $20 credit.
I have filed a BBB complaint against Verizon Wireless for this issue as an illegal change that goes unnoticed past the 14-day closing period should be addressed in a more urgent manner.
I have also reached out on Reddit and Twitter, because obviously calling the VZW support does nothing to alleviate my situation. I am very dissatisfied with how VZW is handling an illegal and fraudulent change on my account that has shafted me out of 500 dollars.

You seam to be focusing your anger at Verizon and not your sister. Verizon followed the rules and required IDs and passwords to access the wireless account. You and/or your mother are supposed to safeguard that information. Your sister has committed the felony by stealing your mothers identity for personal gain.
You say "I am very dissatisfied with how VZW is handling an illegal and fraudulent change on my account that has shafted me out of 500 dollars.' My question to you is who made the illegal and fraudulent change to your account? Verizon or your sister? Keeping in mind your sister had all the correct IDs and passwords,
I'm sure if you went to Verizon and wanted to make some changes to your account, and you had the correct IDs and passwords, you would be upset and angry if they put you through the 3rd degree because they thought you were committing fraud.
Good luck to you, (seriously) whatever happens,

Revoke release of Plant maintenance order after change is done to the order

Hi
I need to know if thorugh some configuration I could enable the feature which revokes the release of a plant maintenance order after certain change is done to the order. Please help.
Thanks,
Ankbat

hi
you cannot revoke the status of released after changing the order. you can explore the use of user status profile
regards
thyagarajan

Changes made to the order in SAP CRM 7.0 is not transferring into ECC6.0

Hi SAP CRM Experts,
Could you please provide me the solution for the below concern?
When the changes are made in SAP CRM order ,the synchronization is not taking place i.e., those changes are not replicating into ECC6.0 and the other way round is working fine(from ECC6.0 to CRM)The order is not editable in CRM and giving the message as "Document is being distributed; changes are not possible" and BDOC status as " After qRFC step (intermediate state)" and in the in bound queue (SMQ1) and it is showing as "running" after a while it is clearing but the BDOC and the orders messages are still the same.
Would appreciate for the quick solution.
Best Regards
Succhi

Hi, Succhi
Note 1621031 - Incorrect status I1054 "To be distributed"
Note 1620893 - Screen output without connection to user - SMQ1
also check program CRM_DATAEXCHANGE_TOOLBOX
Denis

HT1660 My itunes library has automatically started to list my songs alphabetically. I do not want this. How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.

My itunes library has automatically started to list my songs alphabetically. I do not want this. How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.

For the missing Artists on your iPod, make sure their tracks in iTunes are not marked as "Part of a compilation" in iTunes. You can do this by highlighting the track, right->clicking on them and choosing "Get Info" from the shortcut menu. When the window pops up, head over to the Info tab and make sure there is NO tick mark next to this option in the lower right hand corner. Lastly, sync the updated changes to your iPod.
B-rock

IWeb will not Publish. The publish icon stays red and no changes are made. Please help.

The question says everything. When I click "publish site," the world icon at the top of the screen stays red (instead of whirling about and turning blue), and no changes are made. When I exit the program, it says, do you want to exit while changes are still being made?
This is confusing, since nothing seems to be uploading according to the icon. The website really needs to be updated and I welcome and appreciate any and all help. Thank you.

See this page for an axample of publishing settings...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
If this doesn't get things going try the second method - publishing to a local folder - to see if that works.
See this page for more troubleshooting info...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
... and this one for info about using iWeb with Lion/Mountain Lion...
http://www.iwebformusicians.com/iWeb/mountain-lion.html

HT1923 what hard drive changes are made when downloading i-tunes 10.6 upgrade

what hard drive changes are made to my computer when downloading the i-Tunes 10.6 upgrade / update?
what registry changes does it make, if any?

Ok, so as far as the hard drive goes, go for the biggeset one you can afford/need. 500 gb, should be plenty big for just about anybody. But as for the speed of the drive.... Yes, a 7200 rpm drive will drain the battery life much quicker than a 4200 rpm drive or even a 5400 rpm drive. Apple has been shipping 4200 rpm drives as a standard for ever practically, and recently made the 5400 rpm the new standard with the 7200 as an option. More important than the physical speed is the buffer size. A nice big buffer will provide quicker access to data and not eat into your battery life. Then there is also the option of an SSD (solid state drive), but those are still crazy expensive.
I've read any Serial ATA drive is compatible with the drop sensor. I upgraded my hard drive with a Seagate, and it works great. Apple generally ships Toshiba drives in their laptops.
replacing a hard drive can be a bit of work. First of all it will void your warranty (But your is obviously expired anyways) It is pretty complicated and takes a lot of patience. iFixit has great step by step instructions. here's a link : http://www.ifixit.com/Device/MacBookPro_15%22_Core_2_Duo_Models_A1226_andA1260
Hope this helps

Automatic Output Message when Changes are made to a PO

Hi Gurus,
I would like to know to to set up automatic print or fax for PO output once changes are made to it. I was able to send automatic print/fax when i create a new PO. But when that same PO is changed, i still need to go to ME9F to fax it. Is there a way to make it automatic?
Thanks,
Jograd

Hi Greetings
would like to know to set up automatic print or fax for PO output once changes are made to it. I was able to send automatic print/fax when i create a new PO. But when that same PO is changed, i still need to go to ME9F to fax it. Is there a way to make it automatic?
You need to make the following u201CFine-Tune controlu201D settings for the output type so that output will be generated automatically once changes are made.
ONLM --> Messages --> Output control --> Message types -->Define Message Types for Purchase Order --> Fine-Tuned Control: Purchase Order --> Include indicator 2. Printout of changes for the output type.
Gobinthan G

I downloaded iOS 7 and now in my music library all my songs are not in the order of the original albums. How do I get them back into order?

I downloaded iOS 7 and now in my music library all my songs are not in the order of the original albums. How do I get them back into order?

go to settings>general>reset>reset home screen layout and see if they appear.

HT1296 Calendar items created on my Iphone 4S are not showing up in the Calendar on my MacPro after USB Sync.. even though they are still on the phone... ideas???

Calendar items created on my Iphone 4S are not showing up in the Calendar on my MacPro after USB Sync.. even though they are still on the phone... ideas???

In the Event mode use the View ➙ Sort ➙ By Date ➙ Decending menu option. Then the latest imports will be near the top of the Event window (depending on when the photos were taken of course).
Or Control-Click on one of the thumbnails in the Last Import album and select Show Event from the contextual menu:
OT

Orders to stay release (VKM3) even if changes are made to the order

Similar Messages

Maybe you are looking for