Org Management - How can I change the start date of all the org units

How can I change the start date of all the org unit objects and its relationships at one shot ?  I have created some 100 Org units with the wrong start date. Please suggest.
Thanks in advance..
Cheers
Vijay

Hello Archana,
Thanks a lot... This has solved my issue...
Cheers
Vijay

Similar Messages

  • How can I make Safari start my homepage all the time?

    I don't like that Safari starts the last page that I was on everytime I run the application. How can I change this so that my default homepage is opened everytime instead?

    Go to your Safari menu bar click Safari > Prefrerences then select the General tab.
    You can set your home page from there.
    If you are running Lion v10.7, disable the Lion "resume" feature...
    Open System Preferences > General
    Deselect:  Restore windows when quitting and re-opening apps
    BTW... when you post for help, please tell us which Mac OS X you have installed. That really helps.

  • When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

    When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • I have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

    i have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

    Always want to keep the boot drive with more free space than may seem necessary for performance and to function at its best, 30-40% free or even 50% is not excessive.
    Ideal is to separate your system from your data.
    You should always have bootable backup / clone of your system
    Don't use a green drive for system or data though.
    When you are done cloning system and/or data, remove the old original and keep as backup.
    Then move the system drive to #1 - no matter what you want to reset the default boot volume to where the system is.
    Using Cloning as a Backup Strategy
    Carbon Copy Cloner 3.4.1 
    http://www.bombich.com/software/updates/ccc-3.5.html
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html 
    How to relocate system and user data to another drive:
    http://support.apple.com/kb/HT4337
    By staying with 10.5.8 you are not going to receive security updates, might want to consider 10.6.8.

  • Seen this question before but no answer, how can I change my email address from all caps into a more proper upper-lower style.

    Seen this question before but no answer, how can I change my email address from all caps into a more proper upper-lower style.

    You should be able to change your e-mail address from your provider ... then edit it to meet the Apple requirements.   Unfortunately you've given us no profile details so we can't tell what device you have.

  • How do you change/adjust border width for all the cells in a table created in Pages?

    How do you change/adjust border width for all the cells in a table created in Pages?
    Note- I am trying to figure out how to create and format tables in the latest version of the Pages app on an iPad air (iOS 8.1.1.1) . Creating tables, adding or removing borders for individual/all cells in a table seems straight forward. However the default border style seems to be a heavy black line. How do I change this?
    I found the option add or remove borders for all/ individual cells in a table, however I can't find any option within style/format dialogue screens for changing colour or line thickness for table cells. Likewise I can't find any clear instructions on how to do this in apple help pages or support website
    Btw- I'm assuming  it is possible to customize/adjust the colour & thickness of selected lines in a table created in this app (it's fairly easy to do this word processing apps like MS Word) please let me  know if this is not actually possible in Pages

    They know perfectly well what they took out of Pages '09.
    Well over 90 features.
    Do you think you posting feedback is going to remind them of what they did?
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
    Peter

  • HT1420 I just bought my cousin's ipod, and I want to update it on my computer.  However, it needs authorization from his account to keep all the apps, and he's already authorized it on 5 computers.  How can I update this ipod without losing all the apps?

    I just bought my cousin's ipod, and I want to update it on my computer.  However, it needs authorization from his account to keep all the apps, and he's already authorized it on 5 computers.  How can I update this ipod without losing all the apps?

    You cannot use someone else's apps without violating the license agreement. The apps are tied to the owner (via Apple ID). The right thing to do would be to update and start fresh.

  • How can I sort lines of data (alphabetically) in the new pages 5.0?

    How can I sort lines of data (alphabetically) in the new pages 5.0?
    It was very simple to do in the previou version of pages.

    I'm not sure why people are torturing themselves with Pages 5 given the nearly universal outcry on this forum and the incredibly negative reviews elswhere, such as the App Store.
    Pages 4.3 should still be in an iWorks folder within your Applications folder.  Just use that.
    Please remember to tell Apple what we need from them at:
    http://www.apple.com/feedback/pages.html

  • My one year old macbook pro is full.  :  (   How can I see what's taking up all the GB?

    My one year old macbook pro is full already.  :  (   How can I see what's taking up all the space?  I cannot download anymore pictures.  It's running slower than usual.

    OmniDiskSweeper (free) - http://www.omnigroup.com/applications/omnidisksweeper/download/
    Archive files onto other media until your hard drive has at least 10% of its total size free, or at least 15+ GB at all times.

  • Everytime I try to update to iOS5 on my iPhone 4 I get an error containing 0xE while it is trying to backup data from the iPhone.  I have done everything suggested in Apple support.  How can I upgrade to iOS5 without losing all the data on my phone?

    Everytime I try to update to iOS5 on my iPhone 4 I get an error containing 0xE while it is backing up data from the iPhone before installing the new operating system.  I have done everything suggested in Apple support with no success.  I still get the error everytime (about 5 minutes into backing up iPhone data).  How can I upgrade to iOS5 without losing all the data on my iPhone (the error message says that if I continue I will lose all data on the phone)?  If I have already synced the phone before upgrading the OS, would I be able to restore my data after installing the new OS by syncing after the OS upgrade is complete?  Any help would be greatly appreciated. 

    I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
    Before you restore or reset, I would try that first.

  • How can you search this forum without searching all the other forums

    how can you search this forum without searching all the other forums at the same time which is a big fat waste of time.

    Follow this tip to create a bookmark to a search page that searches only the forum you want or...
    Browse with Firefox and enable this Greasemonkey script, which forces all searches from a sub-forum to be local.

  • HT4623 How can u set up your iphone when all the files are deleted?

    How can I set up my iphone if all the files are deleted?

    What files are deleted?
    Please explain

  • How can I make my computer restart with all the same windows that were open when a shut it down?

    How can I make my computer restart with all the same windows that were open when a shut it down?

    That is the way Mac OS X 10.8 (aka Mountain Lion) works by default. Are you actually running that system? (See About This Mac in the Apple menu.) If so, make sure the check box in the shut down alert is checked:

  • How can I easily create a playlist contain all the songs on my iPhone

    How can I easily create a playlist containing all the songs on my phone? I have iOS 7.1.1. on the iPhone. Older versons of iOS had a one button operations to add all songs. iOS 7 does not seem to have this one button operation, which requires me to add songs individually. Considering I have over 1500 songs on my iPhone this takes a long to to do.

    It has always been very basic to always maintain a backup copy of your computer for this very occasion.  Use your backup copy of your computer to put everything on the new one.
    If for some reason you have failed to backup, big mistake, then you can transfer itunes purchases from the iphone to the computer:  File>Transfer Purchases
    You may be able to buy a 3rd party program to get any other music off of the iphone ( not supported by Apple).
    When you sync the iphone, it will erase the current content and replace with content form the new computer.
    "Not happy with itunes right now, more then a bit of a joke"
    Not itunes fault that you did not do the very basics and maintain a backup copy.

  • Line Graph repeats the starting data point at the end also

    Hi,
    We have a Line Graph as below. This graph is used to show the Salary changes of a person, over time.
    But this graph shows an additional non existing data point. Basically it shows the starting data point once again at the end of the other data points.
    The model VO for this graph, does not contain this additional data point record. But the graph repeats the starting data point at the end also.
    In the screen-shot you can see that, the graph has three data points. But the table has only two. The first data point in the graph is repeated as the last data point.
    Is this a Bug..?
    Or an issue with the usage of the DVT tags?
    The code is given below.
    Please advice.
    12 <dvt:graph id="lineGraph1" value="#{bindings.SalaryHistory.graphModel}"
    13 graphType="LINE_VERT_ABS"
    14 shortDesc="#{HcmEmploymentTopGenBundle}"
    15 markerDisplayed="true"
    16 continuousTimeAxisInterval="CTAI_DAY"
    17 contentDelivery="immediate" animationOnDisplay="AUTO"
    18 imageFormat="FLASH" stylePath="April"
    19 timeSelectorListener="#{backingBeanScope.AssignmentChangesAndSalaryBean.changeTime}"
    20 timeAxisType="TAT_MIXED_FREQUENCY" dynamicResize="DYNAMIC_SIZE"
    21 inlineStyle="height:40em;"
    22 binding="#{backingBeanScope.AssignmentChangesAndSalaryBean.asgSalaryGraph}">
    23 <dvt:background>
    24 <dvt:specialEffects/>
    25 </dvt:background>
    26 <dvt:graphPlotArea/>
    27 <dvt:seriesSet>
    28 <dvt:series/>
    29 </dvt:seriesSet>
    30
    31 <dvt:o1Axis scrolling="asNeeded"/>
    32 <dvt:y1Axis/>
    33 <!-- <dvt:legendArea automaticPlacement="AP_NEVER" rendered="false"/>-->
    34 <!-- <dvt:timeSelector mode="EXPLICIT"
    35 explicitStart="#{backingBeanScope.AssignmentChangesAndSalaryBean.timeSelectorStartDate}"
    36 explicitEnd="#{backingBeanScope.AssignmentChangesAndSalaryBean.timeSelectorEndDate}"
    37 id="ts34">
    38 <dvt:specialEffects>
    39 <dvt:gradientStopStyle/>
    40 </dvt:specialEffects>
    41 </dvt:timeSelector>-->
    42 <dvt:o1MajorTick/>
    43 <dvt:o1TickLabel/>
    44 <dvt:o1Title id="o1Title1">
    45 <dvt:graphFont id="graphFont1"/>
    46 </dvt:o1Title>
    47
    48 <dvt:attributeFormat id="af1" name="DateFrom">
    49 <af:convertDateTime pattern="#{applCorePrefs.dateFormatPattern}" />
    50 </dvt:attributeFormat>
    51
    52 <dvt:markerText>
    53 <dvt:y1Format>
    54 <af:convertNumber pattern="#{applCorePrefs.numberFormatPattern}"/>
    55 </dvt:y1Format>
    56 </dvt:markerText>
    57
    58
    59 </dvt:graph>

    If I understand your question, this from the Pages online help may give the answer:
    To mark line, area, and scatter charts with data point symbols:
    Select the entire chart. You can also select the chart series (the line or area shape) that you want to mark with data point symbols.
    Click Inspector in the toolbar, and then click the Chart Inspector button.
    Click Series (except for scatter charts).
    Choose a symbol from the Data Point Symbol pop-up menu.
    Choose one of the following options from the Symbol Fill pop-up menu:
    To fill the symbol with the same color as its outline, choose Use Stroke Color.
    To fill the symbol with a solid color, choose Color Fill, click the Fill color well, and pick a color.
    To fill the symbol with a gradient, choose Gradient Fill and use the gradient controls to set the colors and change the angle of the gradient.
    To fill the symbol with an image, choose Image Fill and select the image you want. You can also resize the image by choosing an option from the pop-up menu above the Choose button.
    To fill the symbol with a tinted image, choose Tinted Image Fill and select the image you want. Click the color well to the right of the Choose button to change the tint color. You can also resize the image by choosing an option from the pop-up menu above the Choose button.

Maybe you are looking for

  • Authorization at Sales Order Change (Item level)

    Hello Experts, Is there any standard authorization object at sales order for adding new items? As I want to restrict some users to add new item lines at sales order change ( VA02 ) Regards, Amr

  • Images not showing up in Spry Data Set

    I'm hoping someone can help an amateur. I'm trying to use an xml file to display with Spry (Stacked containers with Spotlight, specifically). It a simple parts list, where there would be an image next to a stacked description/part#. The data shows up

  • Managing shared hard drive on linksys e3000

    I setup a shared hard drive on my Linksys E3000 and everything works fine except for this issue: I created two shares, say Folder1 and Folder2. However any edits made to Folder1 from any laptop's File explorer (Windows & Mac) reflects on Folder2. If

  • How do I change my default search engine?

    I would like to change my default search engine so that a search bar for said engine opens when I open a new tab.

  • How can I access Microsoft Entourage (Power PC version) mail into Mail app running Lion OS?

    I upgrade to Lion OS10.7 today. I discovered that the Microsoft version for Mac on my computer is no longer supported by the new OS. I want to transfer mail that I had downloaded onto my Mac using Entourage. Attempting to Import the mailbox into Mail