Organisational unit for asset master record

Hi,
Which organisational units do you manage in the asset master record ?
Thanks
Kalyan

Hello
Company code / Controlling Area / Plant / Sales Organisation /
Reg
assign pts if useful

Similar Messages

  • Change/ Add screen in Group Box specify tab layout for Asset master Record

    Hi All,
    I need to add or change group box in specify tab layout for Asset Master Record. Please advice where i can change or create new Group Box.
    Thanks & Regards,
    Pankaj

    Hi,
    Try at below path:
    Financial Accounting (New)>>Asset Accounting>>Master Data>>Screen Layout>>Define Screen Layout for Asset Master Data.
    here you can change the layout for the same.
    Kind Regards,
    Mehul

  • What is maintanence level in  screen layout for asset master record

    hi everyboby,
    can anyone explian this
    when I'm defining screen layout for asset master record to  make business area as required entry it was throwing msg like select maintanance level. what could be the reason?can anyone help me on this.
    thanks
    siri

    hi..
    thanks for reply again.
    If i select  business area as optional (main no,sub no)and supress for all fileds (only selected main no) ,I'm able to save screen layout.If i set BA as required select mainno,sub no check box and save it shows the same  error msg.Anyway  i can create asset master now.thanks
    regards
    siri

  • Business area default in asset master record

    Dear all
    Here is one ticket pertains to asset
    when i create asset master record business area will be defaulted
    the problem is when i upload asset master record through LSMW
    by different business area the system throws a error message BUSINESS AREA EXISTS WHICH CANT BE REPLACED THROUGH LSMW
    This is happening for all the asset classes
    so i want to remove that default business area from where should i remove that which t-code or menu path
    regards ravindra kumar

    Dear ravinagh
    removing of business area in asset master record is always possible but
    see when u  r uploading bulk asset master records through LSMW we cant replace the business area  as it is already defaulted in asset master record
    means some where we have assigned  the default values to the asset classes or some other master record
    so we have to find out the source of the defualt business area for asset master record
    when we remove this from the asset classes then the business area will not be defaulted so that we can upload assets from LSMW with different business area
    so please try to find out the source....................
    regards
    ravindra kumar

  • Group box in asset master record's tab overlap each other

    Hi Gurus,
    I was wondering anyone has seen the same issue that I'm experiencing. I'm on EHP6 and have logged the issue with SAP but wondering if you've faced the same problem.
    I basically designed a new tab layout with 2 tabs and assigned the following group box to the 1st tab
    S0001     General
    S0003     Time-Dependent Data
    S0002     Posting Information
    S0013     Equipment
    to the 2nd tab I only assigned
    S0009     Origin
    S0100     Depreciation Areas
    Then I assigned the new tab to the asset class.
    Now when I create the asset through AS01, the tab and group boxes appear however the time-dependent group box overlaps with posting information (please see below). Have you experienced the same issue in your environment?
    Thank you.

    Dear Minab,
    This is definitively the problem of overlapping of the layouts.
    The asset master data transactions AS01, AS02 and AS03 uses a generic tool to define the screen layout. Unfortunately there are some restrictions on that tool which are based on basis functionality.
    The problem is caused by compression and resizing (note 203023)
    Since Release Enterprise there are more fields on that screen in Release Enterprise than before.
    Hence, the problem is caused by the definition of your asset layout the solution in your case could be to move the screen to an own subscreen or to move this screen to the end of the tab.
    Please go the customizing (transaction SPRO) and follow these steps:
       Financial Accounting -> Asset Accounting -> Master Data -> Screen
       Layout -> Specify Tab Layout for Asset Master Record -> Define Tab
       Layout for Asset Master Data
    Select in your layout the relevant tab page.
    Here you may need to change positions and group boxes around. Unfortunately there's no other solution possible due to technical restrictions.
    best regards Bernhard

  • Using the same Asset Master Record for similar assets

    Dear all,
    I would like to ask if it is possible to use the same asset master record for multiple assets which are similar. The assets will be posted in different periods / fiscal years and therefore the depreciation would change and be charged according to the useful life of the individual assets posted to the same master record and which in turn will vary according to periods / fiscal year posted.
    For example, an asset master record is created for Vehicles. The 1st vehicle with a useful life of 4 years is depreciated at the start of the year for 4 years. The second vehicle is purchased on 6 months after on the 1st June using the same asset master record. However the depreciation is not worked out over the same useful life of the previous vehicle but is extended for a further 6 periods. Is this possible and how is it done.
    Many thanks for any feedback and help.
    Thanks
    PRG

    Dear Peter
    What is the issue in case you created separate Asset Master for each Vehcile ? Is there any specific need for you to accommodate all the assets in one single asset master ?
    I don't think it is correct method as per Company's Act. Over and above, how would you plan for the Fixed Assets Register in the given situation ?
    Regards
    Gemini

  • About Create Asset Master Record

    hi expert,
    when use the tcode as01 to create an asset master record.
    there is a location filed and the location relative to an address number .
    my concerns that how can we maitian the address number or do we just pick
    one from the table adrc?
    thanks in advance

    Hi,
    Check whether the asset class is locked in for your depreciation area in T Code AM05.  If so, remove the lock.
    Regards,
    A.Saravanan.

  • Equipment master record updation in Asset master record

    Dear Friends,
    I have a query with regard to Equipment master record updation in asset master record. Here we have created equipment in Plant maintenance module and we have created asset in AS01 tcode. When we give the asset number to PM module guys, they can easily update the asset number in their equipment master by changing the equipment master record.
    But when we enter the same in asset master record in 3rd tab allocations tab, initially it is accepting the equipment details like equipment number, category, object and tech description, but the same is not available after saving.
    Please let me know whether I have to do any customization in asset settings inorder to get the equipment number populated in asset master record.
    Thanks,
    Dwarak.

    Hi,
    Thanks a lot for your reply.
    I did both these customization, but still it is not working. Any other customization to be done? Please let me know.
    And also in asset master record in allocations tab, do we need to select sync and workflow checkbox?
    Thanks
    Dwarak.

  • Error in Asset Master record creation

    I have created one asset class 1001 for land and 3001 for Vehicles by myself (i.e. without reference)
    I have filled all account determination, screenlayout, etc.
    When i create asset master record for LAND, i enter asset class 1001 (for land) & it accepts.
    But when i create asset master record for Vehicle, i enter asset class 3001 (for vehicle). But it throws error.
    Error shown is:
    Chart of depreciation IN00 that was determined is not entered for asset class 3001.
    _How to rectify the problem ?_
    Help with Tcode or menu path.
    Further to rectify,
    I am trying to Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
    But error shown is:
    Chart-of-depreciation-dependent assignment to asset class not possible
    (Message no. AC012)

    I am trying to Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
    But error shown is:
    Chart-of-depreciation-dependent assignment to asset class not possible
    (Message no. AC012)
    Solution given is:
    In order to be able to assign chart-of-depreciation-dependent data to asset class 1001, the following conditions have to be met. You have to have already
    1. Defined at least two active charts of depreciation
    2. Assigned asset class 1001 to more than one chart of depreciation
    However, at the moment this asset class is only assigned to chart of depreciation 1.
    I m unable to understand the solution
    Edited by: Deepak Agrawal on Mar 19, 2009 8:06 PM

  • Error occurs during Asset Master Record Creation.

    Hello SAP Gurus,
    The error occurs during asset master record creation.
    Our fiscal year variant is Z6 (July to June). The asset was acquired in June 15 (previous fiscal year) but was only set up on July 30 (this fiscal year) . When we put the depreciation start date as 15 June the error appeared. While saving the Asset master we are getting below error.
    We tried the same with Post Capitalization of Asset (ABNAN) there also we are getting same error.
    ERROR: - as below
    u2003
    SYST: *You cannot determine the period for rule 02 to 05.08.08 ( todayu2019s date )*
    *Message no. AA613*
    *Diagnosis*The system could not determine a depreciation period on 05.08.08 for period control 02 of the period control method of phase N1 of depreciation key INTERN-00001-0000.
    Procedure
    Maintain the assignment of the periods for the period control entered.
    Proceed
    If the period control you entered is a standard period control, you can assign the periods automatically.Proceed
    Please find enclosed attachment for clear description of the error.
    Please share your experiences regarding this subject.
    Thanking you in anticipation.
    Regards,
    Suresh.
    09986375966

    Hi,
    have you generated the period controls properly? If not, the error is raised correctly by the system.
    To generate period controls go to:
    IMG Asset Accounting -> Depreciation -> Valuation Methods -> Period Control -> Generate Period Controls    / or you can use OA84
    Regards,
    Markus

  • Insurance view disappear in Asset Master record

    Hello,
    I can not see The insurance View while creating/changing or displaying Asset master record.
    What can be the resons ?
    I checked the customizing (Define Screen Layout for Asset Master Data) but the insurance view are alreeady defined as " Optional ".
    What can i check also ?
    Thanks

    Dear,
    Tarek.
    Please go to T.code ANSICHT and look for the respective that No Authorization Radio Button is not selected. I think this may be the problem in your case, it is selected. I hope this helps you.
    ANSICHT manages the asset views with the option of Master Data & Depreciation Areas.
    If you need any clarification. Please revert back. I hope this may solve your problem.
    Regards,
    Pankaj A Bhalerao.

  • CostCenter in Asset Master Record

    Hello Gurus,
      Our client is using Location field in the asset master record for property tax filing.
      So it is required field in asset master record.This location field is same as cost center field,means the data is entered in the cost center  has to be entered in Location field also for reporting purpose.So everytime when a new cost center is defined there is a need to define new location also from FA side.My question is ,Is there anyway that when a cost center is created that this can get added into location table?  Or, can this table be updated without it being configuration?
    Please advise me.All your thoughts are greatly appreciated.
    Thanks,
    Geeta.

    hi,
    is this field TXJCD or STORT from table ANLZ ?
    you must put a validation or modification in exit  COOMKS02 or      
    COOMKS03 (tcode SMOD)
    -> from here you can create an entry in cu-table T499S resp. TTXJ
    regards Andreas
    Message was edited by:
            Andreas Mann

  • WBS Field in Asset Master Record

    Hi All,
    Currently we are working in 4.6 C version.
    The requirement of the client is they want the Field WBS to be populated in asset Master Record under the origin Tab or Time Dependent.
    The standard functionality is available in ECC6
    Could some body help us in knowing how to achieve this in 4.6c, do we the SAP standard Solution or do we need to go for some enhancements.
    Regards,
    Nitin

    Hi
    @ Satish - Seems you have copied the reply from one of my earlier posts which is related to a different issue
    @ Nitin: Go to Screen layouts (IMG > AA > Master data > Screen layout)
    Here, you need to allow WBS Element in your screen layout... Also, if you cant see WBS there, Allow to use WBS element in the IMG Step AA > Integration with GL > Define Additional account assignment objects...
    I never worked on 4.6, but I guess WBS must be allowed for usage
    br, Ajay M

  • Screen Layout Field in the Asset Master Record

    What is the use of the screen in the asset master record, ANLA-FELEI?
    We have some assets where there are different values between this screen layout and the screen layout defined at the asset class (i.e. through configuration).
    It seems the one defined within the asset class takes precedence.

    HI
    Scree Layout controls the diplay of fields, it may not be necessary for a user to use all the fileds provided by SAP. Hence the options like Required, Optional and Suppress are used to control the screen diplay and the TABs to be displayed based on the need.
    Asses within the same class will have same fields since the screen layout are assigned to an Asset class.
    Scree layout for the Tab Depreciation Area can also be controlled with the screen layout defied for the Depreciation Area.  With this one can have different screen layouts per dep. area.
    Hope i'm clear to  you.
    Thanks,
    Vijay

  • Tab layout for asset master

    hi kings
    I am unable to find the tabs in assets accounting.  Because at the time of asset master creation i am getting only 4 tabs. So i want to add some more tabs in the asset master. So how it is possiable to maintained the laout tab in the asset master.
    regards
    ram

    hi EC
    I am explain the problem :
    At the time of  asset master creation i can found it only 4 tabs i.e general,time-dependent,Allication,Depreciation areas.
    But i want some more tabs like Origin,Insurance,Networth tax. in Asset master records.
    As per my knowledge i am maintained the one layout and in that layout cantains the all the tabs in asset accounting. That layout has been assign to respective asset class.
    Eventhough i am not gettting the all the tabs in asset master. So i do for the my issue.
    regards
    ram

Maybe you are looking for