Organizing by date pic taken not date imported?

Just upgraded to iphoto 09 and pulled a lot of pics in randomly from various places and can't get them to show in order of when they were taken. I figure they are organised by import event date of first pics taken. Since I have various imports with photos and folders taken over longish periods of time they are out of sync. Is there any way to view all the photos in order of individual shot date rather than beginning of event date. Does that make sense?

Yes I have. I figure the only way I can do this is to split the events manually so they are correctly sorted and dates of events don't overlap so much - ie. long event finishes way after the nest event started due to how I've imported the files/folders??

Similar Messages

  • How can i sort photos by date taken, not date created?

    How can i sort photos by date taken, not date created?

    I'd like this feature as well. I tend to browse my photos by date in Aperture, but on ios thay always appear in some bizzare random order.
    I've tried several workarounds but with no luck. As metadata is present, surely this should be simple...

  • Locking midi controller expression data to midi note data.  How to do it?

    I am recording some sax and trumpet lines into Logic using Samplemodeling software (The Trumpet, The Sax Brothers). The data goes into Logic on a midi channel.
    At the same time as playing the notes, I am using an expression pedal to control different aspects of the sound (cc64, but it could be set to anything midi controller number, as long as I also set it in the Samplemodeling software and make sure that Logic receives and Samplemodeling sends on the same midi channel).
    The midi note data and midi data record properly. However, I am having a problem with editing. If I move the note in time (i.e. shift it left or right in piano roll), the cc64 data does not move with it. I can see the data, and of course, could cut and paste it or hyper draw it, but that would be very time consuming. Is there a way to lock the expression data to the note data so that when you move the note the midi controller data moves as well. I assume the same question would apply to pitch/volume/pan or any other controller, but I have not tried that.
    Alternately, is there another way to record the data, so it is locked to the midi notes?
    Many thanks
    Steven
    If it is relevant, I am using:
    Logic 9 Studio
    Mac 2.93 Dual Quad
    Novation Keyboard

    Well, I routed around in the manual and finally found the answer. There is a pull down menu which allows you to choose to tie together the non-note midi data to the note data.
    "Turn on the Functions > Include Non-Note MIDI Events setting to tie other data (such as pitch-bend, modulation, aftertouch, or poly pressure) in a region to the region’s notes."
    Problem solved.
    Steven

  • Sorting photos by date/time taken, when date/time created is not an option?

    I'm so sorry if this has been answered elsewhere, but I can't find it on Google or in the forums...
    I need to sort wedding photos from multiple photographers by date taken so I can sort through the wedding as a full event. Sorting by the date/time the file was created will not suffice because I had to convert all photos from one of my photogs from NEF to DNG (D610 files not compatible with CS5), so the 'date created' for those DNG file is days later than all the other images. Thus, sorting by "date created' batches all the photos from one of my photogs together at the end.
    Is there any option in Bridge that will actually read the metadata and sort by the shoot time of the image?
    Thanks for any help!

      There has been a known bug in PSE9 although only affecting raw images and caused by the Camera Raw 6.4 update. The timestamp gets changed by one hour each time an image is modified. I don’t know if your issue is related but the work around is to revert to ACR 6.3
    http://kb2.adobe.com/cps/915/cpsid_91582.html
    The only other work around is to temporarily switch to folder location view, if your images were imported from a single folder. Click on the display button (near top right in Organizer) to change the browser view. If you click on the folder in the left hand pane the files will normally be in sequential file name order which usually mirrors the date/time taken. From the folder location it’s possible to create an instant album, which can then be used as the basis of a slideshow.

  • When Printing Emails Date References "Yesterday" Not Date of Receipt

    Help! I need to print some emails for use in court. In the past the emails would clearly show the date of Receipt. Now the date displayed on the emails in iCloud prints the date on the email as "Yesterday 6:08 pm" instead of the actual date and time of receipt, like "05/22/2014 6:08 pm." The time zone is correct, this seems to be a "feature" that changed recently in iCloud. Other than turning the long header on when printing each email, which results in a lot of extra header information being displayed, what can I do?  Thanks for your help!

    The date offered is the date time printed. You do not get the option to modify which date and time is used. If you feel it is not correct, simply remove it.

  • Date Picker Value Not Date?

    Item: DATE PICKER (USE ITEM FORMAT MASK)
    Format Mask: MM DD YYYY
    Default Value: to_char(SYSDATE,'MM DD YYYY')
    HTML Form Element Attributes: onchange="LoadDates(this.value)"
    Sample Javascript Function w/ 02 14 2008 picked...
    <script language = "javascript">
    Function LoadDates(TheDate){
    alert(TheDate); // Works And Shows 02 14 2008
    alert(TheDate.getDay()); // Doesn't work because TheDate not a Date
    Problem: The date passed to a Javascript Function doesn't act like a date anymore, therefore none of the date functions work.

    Hi James,
    In a wonderful example of inconsistency, the month counting starts at 0. ie Jan=0, Feb=1........Dec=11
    Same for day of the week, Sunday=0, but day of the month starts at 1. Don't ask me if there is a year 0! Also, with the slice method, beginning position starts from 0 and is inclusive but the end position is exclusive. I'm sure there is some logic to it all.
    A good learning resource for web technologies is
    http://www.w3schools.com/default.asp
    but I'm sure there are plenty of others.
    Regards
    Andre

  • How do you make a "purchased" smart playlist that is sorted by "date purchased" and not "date added"

    I'm getting quite frustrated with how iCloud works.
    My "purchased" playlists that comes with the iphone when you purchase a song does not work half the time and never syncs accross devices. Also is it possible to make a smart playlist that orders the songs by "recently purchased" and not "recently added"? I don't get why iCloud messes everything up. It really has ruind the music app. Nothing is stable or easy to use. If anyone has this issue or has a solution I would be very grateful! Thanks.

    DOn't get me wrong, this is a great way to rebuild things, but the "Purchased" playlist is a speacil playlist and will "Reappear" on the next purchase you make.
    You can build one for now, and then when you buy another song, use the playlist your creating now to go by and add to the "green" purchased playlist

  • Unreadable Date (pics) iPhoto 08 Vers. 7.1.3

    Tried to import pics into iphoto 08 from harddrive.
    Several pics could not be imported "unreadable data!"
    There is no other reasen shown...
    Thank you for any help!!!

    Welcome to the Apple Discussions. See if you can open those photos with Preview. If so, then do a Save As so you create a new file. Then try importing that file into iPhoto.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
    If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). 

  • Import Data Option Does not appear in navigation

    I need to test the import capabilities as a Developer, but I do not see the options that are referenced in the help.
    I installed NAV Dynamics 2013 R2 Developer Version on a development computer with "SQL Server 2014 - Developer" installed. I copied a demo company. The option "Import from Data File" does not appear under Departments/ Administration/
    IT Administration/ General. Many other options are also missing.
    I reviewed the security setting for the Domain User and enabled the db_owner and db_AccessAdmin for the user. It was installed with the same administrative user account and the user has SysAdmin rights.
    I assume that this is some sort of security/authentication issue, but I also saw references that certain things are disabled in the demo. I can perform most basic functions, but many administrative functions are not visible.
    How can I enable \the import capabilities?

    Hi Jim,
    this is a Dynamics CRM forum, for Dynamics NAV you can post your questions here:
    https://community.dynamics.com/nav/f/34.aspx
    My blog: www.crmanswers.net -
    Rockstar 365 Profile

  • When I import photos taken from my Windows PC using a flash drive, the photos in iPhoto are dated as the date last modified on PC instead of date picture taken.

    When I import photos to my iMac, taken from my Windows PC using a flash drive, the photos in iPhoto are dated as the date last modified on PC instead of date picture taken.

    Then you need to ask a PC forum how to export the photos there to include the Metadata (specifically the EXIF data)
    If there is valid EXIF data iPhoto uses it (the EXIF data is originally added to the photo by the digital camera) and if there is no EXIF data then the only inofrmaiton IPhoto have available is the file metadata and that is what is used
    You can correct the dates in iPhoto using the batch change data/time command
    LN

  • Dates does not follow import from iPhoto

    Hi!
    I wanted to learn Aperture 3 so I imported my iPhoto library with a couple of Events and stuff, but when I got going I noticed that tha date of every picture I imported was set to 2001-01-01 01:00:00. But when I import them from Photo Stream the dates are right.
    Why did this happen, and is there any way to fix it? It took a long time to import the library, so I don't wan't to try that as a first option...
    Thanks!

    I also observed this problem on some images imported from iPhoto. In all cases the the date has already been wrong in iPhoto after upgrading the iPhoto library to version 9.3.2. And when importing to Aperture the wrong date was transferred.
    The problem (with the images I inspected) was, that the edited versions show the wrong capture date, not the original (master) image files. The originals have the correct capture date in the EXIF information.
    In my Aperture library I recovered the date by collecting all images with the wrong date in a smart album, selectig them and using the "Photos > New version from Original" command.
    The new versions all had the correct date.
    BTW: For my images the date was not 2001, but 1901 - more than a hundred years off I only saw this in Aperture in the "Date created" Exif tag, not in the "Date" tag. iPhoto is showing the full year 1901.
    Regards
    Léonie

  • Data source not getting imported

    Hi,
    Triggering following error when I am try to import the DS '/IRM/LIS_RM_IPCRITM' from BW development to quality.I have replicated the data source in qty and imported once again
    Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS ( )
    Name /IRM/CALIS_RM_000020000001 is not in the namespace for generated BW Metaobjects
    Name /IRM/CCLIS_RM_000020000001 is not in the namespace for generated BW Metaobjects
    Errors occurred during post-handling RS_AFTER_IMPORT for
    The errors affect the following components:
    BW-WHM-MTD (Metadata (Repository))
    Please help me in fixing the issue
    Thanks,
    Sarasu

    Hi Pani,
    I already tried using the program,same error with program also
    @5B\QInformation@    Activation of Objects with Type DataSource
    @5B\QInformation@    Checking Objects with Type DataSource
    @5B\QInformation@    Checking DataSource /IRM/LIS_RM_IPCRITM EQ1CLNT300
    @5D\QWarning@    Changes to Field ZZKSTBWNT ( Position 126 ) are not compatible with database
    @5B\QInformation@    Saving Objects with Type DataSource
    @5B\QInformation@    Saving DataSource /IRM/LIS_RM_IPCRITM           EQ1CLNT300
    @5C\QError@    Name /IRM/CALIS_RM_000020000001 is not in the namespace for generated BW Metaobjects
    @5C\QError@    Name /IRM/CCLIS_RM_000020000001 is not in the namespace for generated BW Metaobjects
    @5C\QError@    Error saving DataSource /IRM/LIS_RM_IPCRITM           EQ1CLNT300
    @5C\QError@    DataSource /IRM/LIS_RM_IPCRITM (EQ1CLNT300) could not be activated

  • Camera: Can I find the Date of Pics taken like I can find Places taken in Photos icon?

    Camera: Can I find the Date of Pics taken like I can find Places taken in Photos icon?

    Click on the Info Button

  • HT201263 my phone can not going upto date .and can not open.only coonnect to itune pic is on the mobile when i switch on

    my phone can not going upto date .and can not open.only coonnect to itune pic is on the mobile when i switch on

    found the solution on the forum already!

Maybe you are looking for