Original Wireless Mouse will not pair with computers using OSX (10.6.2)

I have two original Apple Wireless Mouses (Mice?) [Model No: A 1015 EMC No: 1938] neither of which am I able to pair with either of my Macs (Mac Pro & MacBook Pro). I believe there is some kind of incompatibility issue with these devices and the Snow Leopard OS.
When I try to set up the wireless mouse using Bluetooth Setup Assistant a connection is established, but the pairing attempt is unsuccessful. I have tried using all of the Passcode Options, but each time the pairing attempt is unsuccessful.

I am having the exact same issue. After switching batteries last week, I was no longer able to pair my original Wireless Mouse (model A1015) either. I'm also running 10.6.2 and never had this problem before.
When setting up the mouse, it does appear in the Bluetooth connection panel, correctly says "Connecting" but then stalls in the "Connected" phase and then times out with "The pairing attempt was unsuccessful".
I tried restarting my Mac and leaving the batteries out of the mouse for a day, to no avail. I just repaired my Apple Wireless Keyboard successfully, so this seems to be mouse-specific.

Similar Messages

  • Wireless keyboard will not pair with computer. Unable to submit password.

    My wireless keyboard will not pair with the computer. Now I am unable to submit the password in order to access the computer.

    What version of the Mac OS are you running (from "About this Mac" under your Apple menu)?

  • Wireless Keyboard Will Not Pair With iMac

    After installing Security Update 2007-007 and Pro Applicatiion Support 4.0.1 my wireless keyboard stopped being recognized by my computer. When I run my Bluetooth Setup Assistant it sees my keyboard but I can not pair it. I even installed new battteries in it thinking that was the problem. I had a brand new never used wireless keyboard in the closet which i got out and installed batteries in it and it will also not pair with my iMac. Any sugggestions will be greatly appreciated since I am stumped! Oh, my wireless mouse is working fine.

    The model number is M9270LL/A (its the one that comes with the iMac). When the screen comes up and asks for you to enter a set of numbers to pair with the computer and I type the nembers on the keyboard I then receive an message that an error has occured. I try and try again to pair the keyboard to the computer with the same results. Thanks.

  • HP P1102w Wireless Printer will not pair with a Motorola SBG6782-AC Wireless Cable Modem Gateway

    I previously had AT&T U-verse Internet using an Arris IPDSL NVG510 Wireless Modem Gateway.  My HP Laptop running Windows 8.1 and the HP LasrJet Pro P1102w Wireless Prnter routinely  & automatically connected to the NVG510 Wireless Network  without any problems over the past two years, and the wireless Printer worked without problems. I recently replaced the AT&T U-verse Internet connection with a 25 Mbs Comcast Xfinity Intrnet connection, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway.   My HP Laptop running Win 8.1 Pro connects to the Network and accesses the Internet with no problems what-so-ever;  However,  the HP LaserJet Pro P1102w wireless Printer does connect to the Wireless network and I cannot Print at all from my laptop. I have tried all the P1102w Wireless Printer Setup suggestions from the HP Printer Support Site, but to no avail.  I have also updated the Printer Firmware and Loaded the latest Full Product Installation & Driver Software.  I have tried and re-tried these suggestions over the last two days, but with no luck. I would greatly appreciately any help from the  experts  in this Forum.  to get the printer to work wirelessly, since we also  wirelessly print to this printer from  IPads and other wireless laptops.  

    Hi , I see that you are having issues connecting the printer to the new router. I would like to help you. I would reset the printer first to clear out any previous network settings.
    Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise. Print out a configuration report and make sure the SSID and IP address are cleared.
    Printing a Configuration Page. If the network name has any spaces or special characters, the printer may not recognize it. The printer is only capable of sending/receiving in the 2.4 ghz band. If it is set to 5 GHZ network you may need to change to 2.4 ghz. (rename the 5 ghz or shut it off)
    The WPA key setting needs to be on AES to work correctly not TKIP.Multi casting needs to be turned on.
    Firewall on router has to have open ports for printer.
    If you have Mac Filtering you need to give printer hardware address from Configuration page.You might need to contact your router company for further assistance to check those settings. Try running the Wireless Configuration Wizard from the HP software to configure the printer over the network. If you appreciate my efforts, please click the 'Thumbs up' button below.If you have any issues, please let me know what steps you have taken and the results. Thank You.  

  • TS3048 mouse will not pair

    MS Bluetooth Notebook Mouse will not pair with macBookpro. tried all things. is recognized but will not pair. new batteries, rebooted, reset pram. it worked until i removed it by mistake. OS 10.8.2. Only thing I can think to do is throw it aganst the wall, but that will only mean that I'll need to buy a new mouse and start all over. Hoping someone has a better idea.

    Hello:
    Try deleting the mouse from the system.  Turn the mouse off.  Reset SMC (which is also a restart.  Turn the mouse on and, hopefully, it will be found by the system.
    Barry

  • HP X7000 Wifi Mouse will not pair since I upgraded to Windows 10

    I upgraded to Windows 10 yesterday 29 July 2015 and now my HP X7000 Wifi Mouse will not pair with my laptop HP Pavilion dv7.

    I have the same issue.  I upgraded today and I have to use the built-in touchpad on my HP ENVY 17 instead of my HP X7000 Wifi mouse.  From the looks of it, HP hasn't updated their drivers/software to support Windows 10. I am not very happy with HP - my ENVY 17 gets insanely hot in the palm rest area to the left of the touchpad, and now this wifi mouse doesn't work with Windows 10.  2 big negatives that will prevent me from buying HP in the future.  The HP Envy 17 temperature issue is well-known among us customers that have to deal with it. Come on, HP - support your products!

  • Apple Wireless Mouse - No Longer Pairs with Mac Mini?

    Hi there,
    I've had an Apple Wireless Keyboard and an Apple Wireless Mouse for several months. Unfortunately, the Apple Wireless Mouse no longer pairs with the Mac Mini (Core Duo, 1.66) -- it is getting very frustrating.
    I've tried rebooting the machine, restarting the mouse, and nothing works. Sometimes I get the Bluetooth Setup Assistant which says that it found 1 Mouse, but it failed to pair.
    I replaced the batteries, but nothing changes.
    Help!

    Normally that's caused by debris under the trackball preventing the rollers from moving.  Turn the mouse upside down and rub the trackball Vigorously with a microfiber cloth. 
    The symptoms are usually that scroll will work one direction but not the other.
    Captfred

  • Macbook pro will not pair with Vizio sound bar.

    Macbook will not pair with Vizio sound bar. It has paired and worked fine in the past. in the menu bar at the top of the screen it says it is connected but it is not. when I open the bluetooth preferences and try to pair it says pairing failed. any help would be great. thanks.

    Me too. sigh
    All was well until this afternoon, when I swapped out the batteries on my trusty old Microsoft IntelliMouse Explorer for Bluetooth, which has worked flawlessly for me for a few years now. After I put new batteries in, my MBP wouldn't recognize it. I went through the Bluetooth Setup Assistant, and it "saw" the mouse and properly listed it as "Microsoft Mouse". I hit "continue", of course, and the Assistant said "Pairing with your Bluetooth mouse". It got as far as "Connection established" (and I saw the mouse appear in the Bluetooth preference pane", but then I got the dreaded red words: "The pairing attempt was unsuccessful. Make sure your mouse is in range of this computer, turned on and "discoverable." Etc., etc. I made sure of all of those things and tried again, many times, with the same failure every time. I tried different batteries, rebooted the Mac, and so on. No luck.
    Figuring my mouse was dead, I went out and bought a Kensington Slimblade Bluetooth Presenter Mouse, brand new, never been paired with anything. Same problem!
    Also, I can no longer get my Palm Treo 650 to sync via Bluetooth. It used to be a little flaky (often complained that the port was in use by another application), but rebooting the Treo always solved that. Now, it doesn't.
    One trusty old mouse suddenly stops pairing, one brand-new one refuses to pair, smartphone won't sync any more. I haven't installed any system updates or anything else since the Microsoft mouse worked. The only weird thing going on is that I'm having massive network connectivity issues with my broadband connection (probably a flaky cable modem), and a couple of days ago I bought a new Airport Extreme a/b/g/n wireless router, which is at the other end of the house from my computer and now-defunct mice.
    Very bizarre. Can the Bluetooth chip or antenna in a MacBook Pro burn out or otherwise fail?
    Puzzled and frustrated,
    :ian

  • Magic Mouse will not pair (OS X Yosemite version 10.10.1)

    All of a sudden my Magic Mouse will not pair. Very annoying!
    I have changed the batteries, several times, so the light is on on the Magic Mouse.
    I have opened System Preference/Bluetooth. I can see that it is searching for devices but it is not connecting to the Magic Mouse.
    I currently have a Apple Wireless Keyboard and have paired an Ultrathin Touch Mouse in the interim, but I want my Magic Mouse back.
    Can someone please help (in a language that I can understand) with this issue.
    Thank you so much.
    Cheers
    Breeze

    Try a PRAM and SMC reset of your Mac.
    You may need to use an Apple Wired Keyboard to perform the PRAM reset.
    Reset your computer’s PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • IPhone 5 will not pair with Uconncect since 8.1.1 update

    iPhone 5 will not pair with Uconnect since 8.1.1 update.  How can I fix this?

    Apple would "not" replace my Iphone 5 till went to dealer and had my bluetooth on u connect system updated. Advisor acted like I just come from the planet Mars when I told him what I needed. So a tech advisor went with to my vehicle and connect his 4S then went and about a minute flat "paired" my iphone 5! I seen him go through a step that even the manufacter's manual did not even mention to "pair" an iphone using bluetooth! I then asked what he had done and so he showed me to successfully start the "pairing" process the four digit code he used for the u connect and on the iphone screen came up displaying u connect and just to the right it says "not" paired. I had been there around twenty times myself! He then pressed the "not paired" display and when he did the keypad popped up and the advisor put in the "same" four didgit code that he originally had used to start the pairing in uconnect and then press the "complete or done" button on the iphone keypad after doing this the u connect displays "pairing process has begun" and less than a minute it did! All the phones including my 4GS I "never" had to do that and I had "never" had a pairing problem before so to me it must the new IOS 6 system!

  • I can detect my Bluetooth devices using a BLE scanner and it says they can be connected but - My 5S will not pair with these devices

    I can detect my Bluetooth devices using a BLE scanner and it says they can be connected but - My 5S will not pair with these devices

    What devices?
    Iphoen supports bluetooth for stereo headsets/speakers, handsfree telephone devices, some keyboards, some apps from the app store and interenet tethering if provided by your carrier.
    It does not connect to computers, other phones,etc.

  • 3rd party mouse will not pair using Lion?

    Just upgraded to Lion tonight.  My HP Laser bluetooth Model N558 mouse which worked perfectly on the 17" macbook pro using Snow Leopard NOW will not pair with Mac.  Downloaded the latest HP drivers, did a software update, restarted but mouse attemps to pair for about 1-2 seconds and then error message comes up saying the Mouce cannot pair with the Mac.  Very frustrating and not finding any answers on MAC or HP forums. Error message on "select bluetooth device" says, "The device does not have the necessary services." It sure had the necessary services using Snow Leopard.  Next error message, "The paring attempt was unsuccessful.  The device is refusing the paring attempt..." 
    No matter what I have tried, new batteries, restarts, take out batteries for 10 minutes, holding down 'discover' button for 10 seconds. I've tried just about everything mentioned in the forums.
    I don't enjoy the prospect of having to lug a usb mouse on my road trips but cannot find a solution.

    Buenos dias.
    yo tengo el mismo raton de HP Laser N558 DPI 1600
    ManoFacturado 2009
    Yo lo usado con Mac OsX 10.4  ; 10.5.0 ; 10.6.8
    sin ningun problema incluso con windows.
    compre raton de Apple no me termino de acostumbrar a el.
    La pena es que HP no de respuesta con el raton HP n558.
    De todas manera a mi no me enlace ni poniendo 00000 ni sin codigo etc.
    Alguien sabe alguna solucion.
    Saludos Pedro Colas
    Macbook Pro 15,4" dicembre 2008 2,4GHZ 8GB DDR3 1066,HD 1TB 5400
    Powerbook G4 Aluminium 1,67 PPC , HD 320GB , 2GB DDR2
    ===================
    Good morning.
    I have the same HP Laser Mouse 1600 DPI N558
    ManoFacturado 2009
    I use with Mac OSX 10.4; 10.5.0, 10.6.8
    without any problems even with windows.
    buy Apple mouse I get used to the term.
    The pity is that HP no mouse response with HP n558.
    In any way I do not link or putting code 00000 or no etc..
    Anyone know any solution.
    Greetings Pedro Colas
    Macbook Pro 15.4 "2.4GHz dicembre 2008 8GB DDR3 1066, 1TB HD 5400
    Aluminum Powerbook G4 1.67 PPC, 320GB HD, 2GB DDR2

  • My bluetooth keyboard (Macnus 3.0) is recognised by my iMac but will  not pair?  I have paired it with my iPad using code 8310 but it still will not pair with my iMac.  Can someone help please?

    My bluetooth keyboard (Macnus brand - bought recently in Thailand)(similar to Mac small keyboard) will pair with my iPad using code 8310,and is recognized by my iMac but will not pair?
    There are very scant instructions with the keyboard and no mention of any code (the code was prompted by my iPad).
    I have followed the instructions but it still will not pair with my iMac!
    Can anyone help please?
    My iMac is 20 inch  Mid 2007 OSX10.9.1 4GB RAM

    Hi All, thank you for you suggestions.  I have been unable to find any website for the maker, but have looked at several Thai/cambodian sites incl <http://www.buycoms.com/Article/8435/index.asp>  which mentions the keyboard being suitable for tablet or windows.  No mention of iMac!  although the box is branded to indicate Mac compatable.
    I'm thinking that maybe it just will not pair with an iMac.
    Ill keep looking for the maker website, which might come on later in the future? maybe?
    thanks again.

  • Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac.  Any solutions?

    Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac.  Any suggestions please?

    Yes, it did.  I have not had any problem with my iPad pairing, just the iPhone.  Thank you
    Pam

  • Just installed Safari on PC.  MS wireless mouse will not scroll on most pages; will scroll on history section of homepage.  Any explanation?

    Just installed Safari on Sony PC.  MS wireless mouse will not scroll on most pages.  But will on "History" section of homepage.  Help appreciated.

    Panic over. I tunes now appears to be working normally.

Maybe you are looking for