OS 10.2.4 on G4 Mac Mini

Hello, is it possible to install OS 10.2.4 on a 1.25Ghz, G4 Mac mini?
Thanks

That's one of the more interesting reasons I've seen for a while for wanting to run an earlier version of MacOS!!
In some ways it's true of course - Jaguar was, by the time it was superseded by Tiger, a mature and very stable operating system. I still run it on a couple of G3 iMacs, and as a standby option on a G4 powermac and in some ways it's refreshingly pleasing and simple to use. That of course is the thing, because in comparison to the resources and tools embedded in Tiger and now Leopard, Jaguar is very simple and basic.
On compatible systems, where the need is for that simplicity, Jaguar is certainly a good option, though as has been said, it would result in a lot of incompatibilities with subsequently released software and peripherals. However, it's worth remembering that by the time it too was replaced, Tiger (which IS compatible with the early Mac minis) was also a very stable operating system, so not only is it compatible with G4 minis and runs well on them, but also contains many enhancements over MacOS 10.2.x.
It's also worth remembering that many bugs are actually not so much in the OS as in software.

Similar Messages

Apple Mini-DVI to Video Adapter and Mac mini (2009)

Can anyone tell me whether the Apple Mini-DVI to Video Adapter listed here:
http://store.apple.com/ca/product/M9319G/A
works with the latest Mac mini (early 2009)?
If it does not what other solutions are there to connect to composite, component or s-video?

KC from Ann Arbor, MI had this to say as a review on the page to which you have linked;
10-May-2009
I bought a Mac Mini (May 2009) and this Mini-DVI to Video adapter with plans to use it to send an S-video signal to an analog TV. Though the sales staff at the Apple store said it should work, it does not. The graphics card apparently should support it, and it may be addressed with a future driver update, but as of now this does not work. I have used a mini-DVI to VGA adapter and monitor to verify that the port is working, and also verified that the S-video cable and TV input work. There are third party VGA to S-video/RCA adapters available so I plan to use one of those for my purposes. This is probably a 5-star product when used with the right Mac; however, Apple should have made it clear that having a mini-DVI port on your Mac is necessary but not sufficient for this to work - hence the 3 stars.

Install Windows 8.1 Pro on Mac Mini Late 2014

I'm trying to install Bootcamp on my Mac Mini. Windows reports that it cannot install or create a partition on the drive after formatting the BOOTCAMP partition as NTFS.
This is my setup:
1. Mac Mini Late 2014 with 2TB Fusion Drive.
2. Windows 8.1 Pro x64 full version ISO downloaded from Microsoft Store.
3. Sandisk Extreme Flash Drive (I have tried both 16GB and 64GB).
4. Bootcamp partition = 500GB.
5. Other USB devices plugged in: Corded USB Mouse and Apple Extended Keyboard (both of which are required to enter the serial number and navigate the installer window).
6. No additional storage devices of any kind are connected aside from the internal Fusion drive and the installer drive.
7. Booting from the EFI portion of the Bootcamp created Windows installer.
I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next. I fail to understand how this could make any difference.
If you have any other tips, please let me know.
I have installed or helped other people install bootcamp many times over the course of the past 2 years. Every single time it has caused endless headaches and literally weeks of wasted time.
I have read endless posts on what is causing these problems. I will consider summarising these for anyone else having the same problems. Everyone has their theory so far about this Bootcamp nightmare, but so far there doesn't appear to be any one magic solution.
Apple's inability to address the issue suggests that the problem may be with the Windows installer. Perhaps Microsoft is deliberately causing this?
I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
If you have any better idea, please let me know.
On another topic, how to I rename the NTFS partition back to BOOTCAMP? All options to rename this partition are greyed out in Disk Utility...
Cheers,
Paul

Paul@Sydney wrote:
7. Booting from the EFI portion of the Bootcamp created Windows installer.
The FAT32/NTFS partition is usually not adequate for an EFI install. You can delete the BCA-created partition and create a Disk Utility partition which is formatted as Free Space. This will be split into an MSR and MSD. Fusion drives create problems, especially if the BC partition lies outside the traditional MBR 2TB boundary.
Before you delete the BCA-created partition, please post the output of
diskutil list
diskutil cs list
sudo gpt -vv -r show /dev/disk0
sudo gpt -vv -r show /dev/disk1
I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next. I fail to understand how this could make any difference.
Windows installers up to W8.1 do not have USB3 drivers. These are installed after Windows is installed and BC drivers are in place.
Apple's inability to address the issue suggests that the problem may be with the Windows installer. Perhaps Microsoft is deliberately causing this?
The requirements are pretty strict when installing Windows. Any deviations cause headaches and grief.
I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
The USB is usually the issue.
On another topic, how to I rename the NTFS partition back to BOOTCAMP? All options to rename this partition are greyed out in Disk Utility...
After Windows is fully installed and BC drivers are in place, log into Windows, right click on it and rename it on the Windows side. It cannot be renamed on the OSX side with diskutil renameVolume. Here is an example sequence. You cannot rename volume during the installation process.

How do I install Windows 8 on Mountain Lion (mac mini) 2010 Server using bootcamp with out Optical Drive?

I have a 2010 Mac Mini server running 10.8.4 (12E55). I just bought a brand new copy of Windows 8 from micrsoft. I have tried using boot camp and it will not recognize a burned DVD in my remote optical drive on my laptop running windows 7 or my macbook running Lion 10.7.5. I have had Microsoft on both of my computers remoted in for about 8 hours and they tried just about everything that I've tried.
Microsofts tech support has made me a bootable DVD and a bootable Flash Drive through remote desktop (awsome good job microsoft tech support). I have even tried formatting my mac mini's second 500GB hard drive to FAT32 using this whole disc as my windows partition. I know that when I go to install windows 8 it is going to reformat the drive to NTFS but all the articles that I've found, say this is what you have to do to get the drive formatted properly to get the ball rolling and get windows will fix it when it goes to install by reformatting to NTFS.
Ok so right now I have my second 500GB hdd on my mac mini formatted to FAT32 and I have tried to reboot holding my option key like I do on my mac book. If I want to boot to a different hdd on my macbook all I do is hold the OPTION key during start up and you get prompted to choose one of the bootable disc that is on your computer. Well if I put my USB drive which is bootable on my macbook into my macbook and do this right now its not showing up.
Now I just put the DVD that they made me in my macbook and it shows up as bootable disc. But the USB doesn't. (1 hour later) I just got microsft to remake the USB drive and am going to try that again so ta ta for now and I'll come back on to post to tell you if it works.

mikkel-kj wrote:
These apps paralells and fusion and virtualbox, are they in Mac App Store? And when I have the app installed what then, now it ain't only bootcamp what shall I do now to install windows 8?
Mikkel
Parallels, Fusion, and VirtualBox are available from their respective sites. Read their installation instructions which explain how to install Windows.

Mac Mini '09 incompatible with older flat panel TV's?

I just bought a Mac Mini '09 and tried to hook it up to an old (2002) Sony Plasma 32" TV. I am using the mini-DVI to S-video/composite video adapter. I get a "no signal" response from the TV, indicating that the Mini and the TV are not communicating. My black '06 MacBook is able to successfully connect to the Sony TV using the exact same adapter and cable combination. The TV only has component video, s-video, and composite video inputs -- no digital inputs.
I spoke with an Apple Care person, and she and I agreed that there is likely a compatibility issue with the new Mac Mini's video card and older TV's. I have also seen it suggested that the new Mini's DVI port will not pass on an analog video signal. Is there any fix for this, either a driver or a cable adapter? Would one of the display manager programs (SwitchResX, etc.) be helpful? Do I need to get a new TV?

It sounds like the new Mac Mini has HDCP enabled (as it is on the new MacBooks and MacBook Pros).
This is a kind of copy protection, and will not allow HDCP protected content to be played on an analog source.
A tool like http://www.hdfury.com/ will take the HDCP stream, and convert it to an analog stream. It's perfectly legal.. and will extend the life of older TV's (manufactured before 2002).

Using Mac Mini and a 26" Samsung Tube TV with Apple DVI to Video Adapter

So upon first hooking this adapter up from my Mac Mini to my samsung 27" tube TV, it worked fine–but everything was massive in size. I started changing resolution sizes in the preferences panel and one of them set the screen flickering vertically, like a mismatch in refresh rates.
Anybody else have this issue and resolve it successfully? It obviously works, it was for me for the first couple minutes, but I can't figure out what sent it flickering–and how to resolve it.
The TV is connected VIA composite (RCA) cable from the adapter to the video-in port.

Try starting in Safe mode. That should get your screen back.
http://support.apple.com/kb/HT1455?viewlocale=en_US
See also this article:
http://support.apple.com/kb/TS2213?viewlocale=en_US

Mac mini,DVI to ADC adapter.

Looking at picking up the latest Mini to run logic on. I used to have an older Mac mini that I connected to the Apple studio display with a DVI to ADV adapter. Will I be able to get this display to work with a new Mini?

The new minis DON'T have a DVI out. There's an HDMI and there's T-Bolt. You can get adapters for either to VGA, DVI, HDMI and I've even seen RCA adapters. Apple probsably has HDMI-ADV or T-Bolt-ADV adapters too.
However you connect it, if you Google it long enough, you'll find an adapter to suit your needs.

Mac mini - dvi to svideo adapter - no screen on tv

Hello, I really don't know if anyone knows an answer of my problem.
No one did this far.
So I signed up here.
Ok, my question.
I have a mac mini 1.42 ghz. I want to connect it to my sony 100hz trinitron TV with an dvi to s-video adapter. It doesn't work.
I also have a G5 1,6 ghz. At the back it has 2 connections for a screen. I use 1 connection for my studio display, the other one I use for my sony tv to watch movies etc with the dvi to svideo adapter and the svideo cable in the connector an the tv. It works fine with synchronize the screens.
Why doesn't the connector work on my mac mini to my tv??
This is the connector I use:
[img]http://a248.e.akamai.net/7/248/8352/848/store.apple.com/Catalog/nl/Images/M9267_ lm.jpg[/img]
Nookie.

Nevermind. Due this problem I bought a lcd tv a bit earlier then expected.
So my old tv left the building!!
Now I dont have the problem anymore.
No more s-video for me, bought another cable like it's supposed to be. Digital.
Thanks.

How to connect my 60gb IPOD and my Mac Mini

I have my trusty 60GB ipod (no video), with the older wide connector and the funny USB or whatever it is symbol looks like a "Y".
Nice grammer huh.
ANyway the cable I have doesn't plug in to my mac mini or MBP.
What cable do I use to hook 'er up to ITUNES on either system?

Open Quicktime Player
File Menu: New Audio Recording....
However... if the headphone/microphone combination has two 3.5mm jack plugs (pink and green) then the microphone output (pink) is "mic.level" - which is TOO QUIET for the audio input on a Mac, which is expecting the much stronger "line.level" signal strength.
Solutions: get a microphone pre-amplifier between the mic and the Mac (not cheap); or a different microphone with a USB interface.

HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

Hi, I can't see why not...
Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

New Mac Mini and Analog TV

I just bought a new March 2009 Mac Mini. I am trying to hook it up to and old analog TV. The TV has SVIDEO and RCA jacks. I purchased the Apple Mini-DVI to Video Adapter only to find out it will not work with the new model. It seems the new model only outputs DVI-D and not DVI-I.
I am trying to hook up the mini-dvi to SVIDEO on the back of my TV and then for the audio connect them to the TV with RCA jacks. Is there any way to get the new mac mini to work with an analog TV?
Thanks

When you cite "VGA converter to RCA" do you mean a little box that actually converts the signal down to RCA/composite, like this:
http://www.monoprice.com/products/product.asp?cid=101&cp_id=10114&cs_id=1011407&pid=4724&seq=1&format=2
or simply an adaptor like this one:
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10401&cs_id=1040113&pid=2509&seq=1&format=2
The crucial thing I'm waiting to find out is whether the new Minis provide ANY analog video signal to either of the video ports at all (which would seem to be the case, since VGA is analog, right?), or if the analog roadblock is simply caused by the currently available adaptors.

I am having keyboard problems when trying to boot up an OS (bootcamp on Mac Mini Server)

I recently tried using bootcamp on my new Mac Mini Server.
I uploaded a windows ISO Image perfectly the way it asked, Windows 7, I followed the correct steps, euqally divided one of the hard drives, and I was ready to actually set up the new Windows section of my computer. During this booting session, my dog came in the room with her ball and knocked the computer plug out of the socket. Now when I turn on the mac, the fan still works, the same Macintosh sound comes up, the screen turns that usual very bright gray, but it stays on that gray. After a minute or two, the screen turns black, with a blinking underline, as if it were confused to choose which operating system it has to boot.
My problem here is that I use a wireless keyboard (not by Apple) -- and I suppose that bluetooth syncronizes with the OS and not the computer system itself -- so my keyboard commands do not get recognized in order for me to navigate into Windows 7 or OS X Mountain Lion. I tried solving this problem by purchasing a brand-new USB keyboard (since Mac Mini Servers do not have the PS/2 entrance). I guess this new USB keyboard didn't work, I imagine, either because the USB slots on the machine are not recognized by the computer's internal system, only by the Operating Sysytems (which I hope isn't true), or that the mac had never used that USB Keyboard and wasn't going to be capable of using it until it had installed the necessary drivers, but without the OS running that would become impossible.
So my question is: Is there a way that I can connect a keyboard to the mac so I can continue installing my alternate Operating System? Is it maybe another problem all together?

It is starting to sound more like Bootcamp failed to install properly.
Have a look at > Boot Camp 5: Frequently asked questions
then perhaps > Failed bootcamp instlation - Google Search

How can I use screen share of my mac mini? Problems validating

I recently purchased a mac mini to act as my home media server for audio as my airport express was not playing nicely with my Peachtree DAC. Anyway, I have set up sharing on the mac mini and can't figure out how to connect from my wife's Macbook, or her iPad. (I use a PC, so would welcome advice if available on how to connect across platforms as well.) My goal is to set up the mac mini without a monitor or keyboard connected to it and have it sit with our main stereo.
I am able to connect to the mac mini via my wife's macbook IF I ask for permission and I grant it from the mac mini. However, I am unable to connect no matter what I try if I try to log in as a registered user. I have tried to add her as a user to the mac mini, I have tried to log in as a guest, and I have tried to log in with a password but no matter what I try, I get an authentication error when I try to log in as an authorized user. For more clarity, here is what I have tried:
1. Added authorized users on the mac mini. I created a user name for "jeff", "maureen", and "lastname_maureen" on the mac mini and provided a password for each user. "jeff" and "maureen" are just created on the mac mini, and "lastname_maureen" is the user name of my wife's computer. I confirmed the passwords, and still am unable to connect. I have allowed any user on the network to access screen share, and no matter what I do I get an authentication error. Again, if I attempt to log in from my wife's computer by asking permission, it works fine but I can't figure out how to set up an account to login. Please help. Thanks!

Have you tried connecting one to the HDMI output, and another to the Thunderbolt port (with the appropriate Mini DisplayPort-to-other connection adapter as needed)?

Can I connect multiple displays using a mac mini

Can I connect 2 displays using the mac mini? If so, are there any accessories that I need? Are there certain monitors or connections that I should use?

Hello,
Assuming this is a 2012 Mini...
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html
If you need more...
http://eshop.macsales.com/item/NewerTech/VIDU3HDMIDV/
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

How can i control my new mac mini using my new macbook air? Thanks

Hi, I would like to control and even file share my macmini using my macbook air... the mac mini is plugged into the family 50inch plasma... so getting access to it is not always easy! I'd like to play itunes, films, file share, just about do everything from the macbook air as if I was on and in front of the macmini... i'm hoping to do this from any country using wifi!
I've looked at screens - vnc client, but can;t find anywhere where it says I should download the app... is there a master to download to the mac mini, then waht do i download to the macbook air to enjoy control... also am i expected to download twice and pay twice?
I'm very new to the mac world... loving it, but lots to learn! Appreciate your help, thank you
Chris
PS... bonus if I can also control the mac mini using my iphone4 and ipad 2 (yup, my bank balance took a major hit.... apple certainly got me hooked!)

Sceen sharing is built into the OS go to your help in the finder and type in "screen sharing"
To set up screen sharing: (on the mini)
Choose Apple menu > System Preferences and click Sharing.
Select the Screen Sharing checkbox.
To specify who can share your screen, select one of the following:
All users: Select this if you want to allow any user with a user account on your computer to share your screen.
Only these users: Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Accounts preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list and click Select.
Click Computer Settings and set the following options:
Anyone may request permission to control screen: Select this to allow anyone on your network to request to share your screen.
VNC viewers may control screen with password: Select this and enter a password that VNC viewer applications can enter in order to control your screen.
It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

Using a 1TB G-Drive with macbook and mac mini

After checking the net for solutions, I have decided to post here. Hopefully I haven't missed something as to not be redundant.
Currently I am using time machine to do incremental backups on my unibody macbook to my g-drive wirelessly through my airport extreme via usb.
I ordered a unibody mac mini and I was wondering if I could connect the mac mini to the g-drive via firewire 800 and back up both mac mini and macbook to the one drive.
I know time machine can handle the multiple computer situation, but I don't know if it can handle the 2 inputs simultaneously. USB from the airport extreme and firewire 800 directly from the mac mini.
Thanks for the help,
Reardan

Well after experimenting, I found that the mac mini would not recognize the g-drive while it had both USB and firewire plugged in.
So what I did was unplug the usb and shared the g-drive through the mac mini with file sharing.
The issue is now that my macbook does not seem to be able to deal with the new path.
I can view the contents of the g-drive but the .sparsebundle file can not be opened on my macbook. It tries to mount it as a disk image.
Anyways, any insight would be appreciated.
Thanks

OS 10.2.4 on G4 Mac Mini

Similar Messages

Maybe you are looking for