OS 10.6 and PS CS3 problems

I recently upgraded my Mac OS from 10.4.8 to 10.6 and my PS CS3 won't open

I had a similar problem. I was exporting to JPEG and LR crashed. That's the least of worries. Every app i've opened so far in snow leopard has crashed one way or another. Waste of 30 bucks so far!

Similar Messages

IPhoto and Photoshop CS3 Problem

I have been downloading my pictures into iPhoto and editing them in Photoshop(CS3) now. As long as I was shooting jpeg, I would just hit Save in Photoshop and the edited picture would show up in my iPhoto application, in in "modified" in iPhoto library.
Since I got Photoshop CS3, I have been shooting a lot more RAW. RAW images, saved TIFFS, don't seem to get saved to iPhoto application, just the Pictures/iPhoto Library folder. And I am noticing that edited pictures don't automatically go into modified, but stay in the originals file.
I am also noticing that even jpegs do not automatically get saved to the iPhoto application. They too open up the save to window for Pictures/iPhoto Library. All this since CS3.
So only the original files downloaded from my CF card are in iPhoto. I feel that something is wrong here. I should be able to have my edited files show up in my iPhoto application without re-importing them.
I tried a trial of Aperture, but my DT graphics card and processor can't handle the application. But that is not the point. What has happened that iPhoto has become essentially useless to view my modified photos?

Birgit
This may be the source of the issue.
Bridge is NOT Photoshop, but an alternative file organiser. So when you set Bridge as an external editor you're really sending the pics to another organiser, not an editor. Presumably from there they go to Photoshop and are then saved back... to Bridge, not iPhoto.
Try setting PS as the editor not Bridge and see does that make a difference,
Also, when you send pics to an external editor, only a maximum of 4 will go. So you can only work in batches of four.
Regards
TD

QuickTime 7.5 for Leo and Adobe CS3 problem

PhotoShop doesn't startup after QT 7.5 update it tells "Could not initialize Photoship because disk is not available". AI doesn't startup at all. Dreamweaver works fine, Fireworks works fine, Flash works fine.
Also, there is a problem with audio application for Mac, MegaSeg. After QT 7.5 update it crashes when you quit application.
Be aware.

Illustrator (CS3) works fine, so does InDesign but Photoshop crashes telling "Could not complete your request because of a program error." It worked ok before updating QT 7.5.

Anyone else having a Problem with Leopard and Photoshop CS3?

I'm using CS3 with Leopard 10.5.4 at work and there are some very aggravating anomalies, that I'd like to nail down to a cause. Most frequently, when switching from apps to P'Shop, the menu bar stays for the previous app, i.e. when going from Finder to P'shop, the menu bar still says Finder and has Finder options. Changing from Lightwave to P'Shop, the menu bar remains Lightwave.
Occasionally, an Adobe app - P'Shop or InDesign - will simply disappear and not come back. The icon in the dock shows it as active, but no amount of clicking, Command-Tabbing will reveal the app and I have to Force Quit, losing unsaved changes.
I have a feeling it's Leopard, since, I've used CS3 on Tiger and CS4 on Tiger and never had a problem.
I'm wondering if upgrading to the latest Leopard would make much of a difference.
Has anyone come across this and found any kind of answers?
Thanks for any suggestions.
-Vincent

> Just because it doesn't happen to Phil (who may not use all of the same features of the Suite that others do anyway) does NOT mean that these problems are not real and are not mere PEBCAK.
Right. If someone is having a problem associated with Tiger, it's PEBAK. If Leopard is involved, it's automatically because of Leopard. Apparently, with Apple's latest OS, trouble shooting problems are no longer necessary - just blame it on Leopard and call it a day.
b FUD
I find the dynamics here really interesting. This thread would have been very different if Vincent had posted with problems involving Tiger. Would have gone something like this:
After admonishing him for not providing more information about his setup by posting the obnoxious big blue link on how to ask questions (ahem - we know NOTHING about his machine or configuration, such as which machine, how much RAM, scratch disk or attached peripherals), there'd be all kinds of trouble shooting advice given - "try a new user", "repair permissions", "run DiskWarrior, and on and on ...
But no, since he mentions Leopard, none of that is apparently necessary and the completely, utterly
b irresponsible
advice is given ... "that's just the way Leopard is".
Those are some serious problems he's reporting that have nothing to do with Leopard. Something is obviously hosed!
As for discounting my experience because I don't use every app in the suite as extensively as I do Photoshop, I'm FAR more qualified to discuss Leopard and CS issues than Ann or Neil who do not use Leopard at all (and have never used it as far as I know.)
"Others have problems with it", is their battle cry but it's extremely weak. Do I really need to remind you all that these forum are ALWAYS filled with people who have problems, regardless of version or OS? You act as if this forum was a ghost town when Tiger and CS3 were current!
Gee, Ann ... people are STILL reporting problems with 10.5 and CS3? How shocking! Guess what - people are STILL reporting problems with 10.4 and CS3 too! Let me make a prediction - people will have problems with 10.8 and CS9!
Vincent-
> I don't really deal with fonts anyway ...
Yes. You do. Even if you never type a single line of text, every application uses fonts to create menus and other GUI items. If one of those fonts are bad, it can create all kinds of problems, including the very problems you mention.
The fact that you don't seem aware of this and you're still using 10.5.4 leads me to believe you're not familiar with the basic practices of maintaining a healthy system. Again, how did you install Leopard on that machine?
Look, if you're simply trying to justify using CS4, go right ahead. It's a worthwhile upgrade in it's own right. However, if you install it on that machine in it's current state, CS4 will NOT fix your problems because you do NOT have a healthy system.
You asked for experiences with Leopard - I can launch every application in both CS3 and CS4 suites
i simultaneously,
and STILL not have your issues. I haven't experienced anything like your CS3 problems in Leopard - on both a 2006 Mac Pro and a 2008 Macbook.
If you'd like help to try and figure out the real problem, I'm more than happy to help. If not, Adobe will gladly take your money ...
-phil

Problem with Edit IN function between LR 2.3 and PS CS3

I recently upgraded my system to a Windows Vista 64 bit Core 2 Quad with 8 GB. Lightroom now works and loads images the way it should. I do have one major concern and need any help possible.
I am using LR 2.3 in 64 bit and PS CS3 ver 10.0.1 (which is 32 bit - loads slowly but otherwise works fine). The problem I am encountering is in LR Develop / Photo / Edit In... - using any of the menu items:
"Edit in Abode Photoshop CS3"
"Open as Smart Object In Photoshop"
"Merge to Panorama in Photoshop"
"Merge to HDR in Photoshop"
"Open as layers in Photoshop"
Photoshop opens but no image(s) are exported and I receive the message in LR - "The file could not be edited because Adobe Photoshop CS3 could not be launched."
Photoshop, however, was launched but no image exported and so I can't work on the image in PS. The appropriate TIFF image is created in LR for the first two menu items - nothing for the last three menu items.
I can create a partial work around by setting PS as an external editor, however, I can't use 4 of 5 of the menu items.
All the menu items work fine in Windows XPpro.
Any help is much appreciated.
PS I also tried the most recent Window 7 RC with exactly the same results.
Thanks
Bob

Don
I wasn't shouting - I just cut and paste the exact text and font in its original size and type as was shown in the message. Never had a thought that someone would be offended by cutting and pasting exactly what was in a message - it would appear that John Williams saw it for what it was.
However, sorry if I offended you.
Bob
Date: Mon, 1 Jun 2009 19:15:15 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Edit IN function between LR 2.3 and PS CS3
There is no reason to shout. There are only other users here trying to help.
>

Problem printing fra Acrobat 8 and Indesign CS3

Hi Forum
My setup is a Powermac G5 with 10.5.8 and a Epson 1400 and a Epson c8500. I have checked, that I'm using the latest drivers from Epson.
My problem is then I print A4 PDF documents to these two printers, the prints will be cropped, it actually seem like the top and bottom margins of the printable area are wrong. Scaling is set to none and I have also tried printing as an image.
I have tried using Acrobat 8, Adobe Reader 9 and Indesign CS3, also behave the same.
If I use Preview, my prints will look just fine.
I tried the same from a Macbook pro with 10.5.8 and Acrobat 8 and 9, and from this computer things work correctly.
So it's seems to be a problem with an Adobe related file or setting.
anybody seen this before?
kind regards
Lars

Our office is printing fine from ID & PS CS3. This is from Intel & PPC Mac's running 10.4.9.
What is your printer and how is it configured for printing, ie USB or IP.
Also, have a look at the cups error log. You can find this via System Profiler > Software > Logs. This will show which process is failing for the spooled job. You can post it back here for more help.

Problems reinstalling Premiere and Encore CS3

Using Vista 64,I had the problem of losing my 3 optical drives (2 DVD and 1 Blu-Ray) two days ago.(The problem with the drivers not being available).Despite trying the regedit fix (upper and lower filter removal),they still did not work and I could not use the repair option on the installer DVD for obvious reasons.So a fresh install was carried out,everything I had on the computer before the re-install has loaded and is working fine,except Premiere Pro CS3 and Encore CS3.I can load the third party content on the Premiere disc and the codecs and the library on the Encore disc but NOT the main programmes.Anybody know of a workaround?.
The Vista 64 is an upgrade from XP professional and the Premiere CS3 an upgrade from Premiere 6.5.Both applications worked fine until my optical drive problem.Any help or advice appreciated.
Mike Webb

Sounds like a problematic video driver or codec issue. You need to update all your drivers and try again. Also get rid of any unnecessary codecs. Try opening files in various formats and see if the same happens. Also you should search the KnowledgeBase, it contains a lot of information about this kind of problem.
If all fails, call Adobe Tech Support...

PHP and MySQL Connection problem

I am trying to make a PHP MySQL on a remote server connection in Dreamwesaver CS3.
When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.
"Access Denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured."
I know the user, password, etc. work, as I can access the MySQL database with other software.
I checked with my host and they say there are no permission problems on their end.
I have checked the settings on the Test Server page in Site Setup and everything looks correct and works there.
I have not seen this particular problem described in other forum postings (although there are a LOT of postings on this topic!).
Any help would be appreciated.

I thought my testing server was the remote server and is always on as far as I know. I don't know how to turn it on or off.
Is there some other testing server that I should be aware of?
Frank
Date: Wed, 3 Jun 2009 15:43:02 -0600
From: [email protected]
To: [email protected]
Subject: PHP and MySQL Connection problem
I know you are using remote, but is your testing server on? if not turn that on and see if that does it. it just happened to me working on remote server and could not get mysql conn to work, until I turn on my testing (developer server), then I was able to connect to mysql and the tables that I created in phpmyadmin remotly was downloaded.
>

Different Colors when printing from Photoshop and InDesign CS3

Different Colors when printing from Photoshop and InDesign CS3
I have the following problem:
When printing from Photoshop or InDesign to a PostScript printer, Adobe recommends to let Photoshop handle the colors (I use the German version, so I don't know the exact term used, it changes slightly in all CS3 apps anyway).
The manufacturer however told me to let the PostScript printer handle the colors.
When I chose this option in Ps's print dialog and then choose ISO Coated as the printer pfofile, the results are fine.
But when I place the exact same image in an InDesign file and print from InDesign or export to PDF and print via Acrobat, again using "Printer handles colors", the results are the exact same as if I had used Ps and chosen to let Ps handle the colors (way too saturated and a bit too red).
·Photoshop CS3
·InDesign CS3
·Test image is a TIFF in CMYK Fogra 27 Coated (which is also the working color space in Ps and ID.
·Printer: Xerox Docucolor 3535
·Printer profile: ISO Coated
How can I make sure the printer handles the colors in other CS3 apps than Ps? I tried it with ID's print dialog (translated from the German version: Color Management > Options > Color Handling: PostScript-printer decides colors).
Thanks a lot!

RE: "You don't indicate what Xerox printers you have"
In my first post I named it, is that the information you need?
Docucolor 3535 using Splash 3535
That's interesting, so I have to find a way to turn off the printer's Color Management function? I mailed them, hope they can tell me how to do it easily. They usually just tell me to not use any profiles and so on, but that's the general rule in this area, I'm really tired of hearing it. Everybody seems to think profiles and LAB mode are nuclear science and I should stay away from it.
Anyway, the test image I'm using is a simple photograph (size A3, 300dpi), so no transparencies at all. I'm placing this image into an equally large ID file and print it from ID, then export it to PDF-X/3 and print it from Acrobat. Hope that helps.

New hard drive and photoshop license problem

I have a Dell Inspiron 6000 with a 1.5 Ghz Pentium processor, 2 GB of RAM, and Win Xp/Pro SP3.
The hard drive in this computer failed, and it has been replaced. I used an image backup from Acronis True Image 10 to "restore" the new disk.
Now, when I try to open Phostoshop CS2, I receive a message that the license is no longer valid (I have been using this version of Photoshop for a long time).
I don't have this problem with InDesign CS3 (v. 5.0.2), FrameMaker 7.2b144, or Acrobat 8.1.6.
I didn't find any helpful info on the "Product Activation" web page.
I tried a forum search and a search of Adobe.com using the search criteria "new hard drive and photoshop license problem."
The only relevant item I could find is this:
"Backup and restoration of your system using standard tools do not require reactivation. While reactivation after backing up or restoring the system was required in early versions of Adobe software (such as Adobe Photoshop® CS), Adobe has continued to improve the activation process with new technology that eliminates the need to reactivate after system restoration. In complex situations where the system is being upgraded, we recommend deactivating the Adobe software before commencing the system upgrade. Once the system upgrade is completed, the subsequent install/restore will require reactivation, which is typically accomplished without difficulty and is completely transparent to the user."
So does that mean I have to "reactivate" Photoshop CS2? If so, do I use the Activation window that is displayed when I open Photoshop? The serial number has 20 characters. Will the Adobe (re)activation recognize this old serial number? If not, what do I have to do to get this product usable again?
Please help.

>replaced your hard drive and CS2 DRM is looking for the old hard drive number and not finding it
Interesting... I use http://www.terabyteunlimited.com/image-for-linux.htm which creates a bootable CD and runs outside of Windoze
I have made image files and loaded those files to a new hard drive (I use drive swap hardware to make a backup and create a new drive every time I install or uninstall major software) and have never had any program complain about needing activation
But, since the program I use is Linux on a bootable CD, it copies EVERYTHING on a hard drive, even the hidden registration areas as far as I can tell, so when I do a restore to a new drive, everything is put on the new drive

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

Ned, thanks for responding. Internet access is not the problem, I will have a tower computer connected to Comcast.
Isolating the laptop from the internet is the issue.
From: Ned Murphy <[email protected]>
To: Mordecai benHerschel <[email protected]>
Sent: Wednesday, March 18, 2015 7:27 PM
Subject: I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussionSince it is a portable machine, couldn't you go somewhere that has wifi available and use that as a temporary internet connection? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7314414#7314414 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7314414#7314414 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Lightroom 3 and Photoshop CS3 do not recognise Canon PowerShot S90 raw files

My husband has lightroom 3 and Photoshop CS3 but they don't recognise CanonPowershot S90 camera raw files. I've tried searching for the problem on internet but can't find anything that helps. Adobe's DNG converter doesn't work either. I've tried different versions of the DNG converter to no avail. Buying a new Adobe product is out of the question.
Another problem is that his e-mail address has been changed so that he can't login to his Adobe account. We used to be able to contact Adobe Netherlands by phone or email but that option isn't available anymore.
Can anyone help please?

Go to here:
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 3.6
or here:
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 3.6
for the final versions of LR3. Download and install the software. You do not need to remove your present installation first, LR will install over it and fix any faults that now exist.
Your husband can log onto his Adobe account with the old email address and when in the account can edit the address to the new one.

Lightroom 2 and Photoshop CS3

I have a problem where changes or if I edit pictures in Lightroom 2.0, these changes are not reflected in the actual picture if I open them in Photoshop CS3.
Is this a known issue with Lightroom 2 and Photoshop CS3 or there is some sort of a workaround?

>in Lightroom 2.0
Upgrade to Lightroom 2.1 ASAP. Fixed many bugs and it's free.
Anyway. What kind of files? How do you open the file in Photoshop, through the "edit in Photoshop feature" or do you open it separately from Finder/explorer? Do you get a dialog that asks whether you want to edit with changes or the original?

How to select paper type for Canon iP5000 with Leopard and Photoshop CS3.

I have printed photographs quite happily for years on my iP5000 using PS7 and 10.X. However since installing Leopard and switching to PS CS3 I am unable to select paper type (glossy, matt, etc). Is this a 10.5 problem, or as I suspect a CS3 problem. Any suggestions would be appreciated.
I can select paper type in other applications.

I don't know if it is the same for your printer but with my Canon MP600 I experienced the same problem until I came across the fact that when Print is clicked there is a Blue Triangle on the right of the dialogue. Click this and the paper type etc is displayed.

CS4 and pen pressure problem

When drawing with the brush or the clone stamp brush now and then strokes are drawn at full pressure even though that is not the case. The next strokes are ok again for a while and then again... a few strokes like they there was no pen pressure. Very annoying when retouching masks.
I already installed the latest Wacom driver but no joy.
What else could I try?
My graphics card doesn't have OpenGL capacities so I don't think that's the problem or could it?
Also CS4 is much slower than CS3 in updating the screen. Related?
Tips welcome...
I am a long time user of Photoshop (since 2.5) but I think CS4 will be the first upgrade I will skip although I love the new adjustments and masks panels...
Windows XP Pro, 4 Gigs of Ram, Matrox Millenium card, plenty of sratch disk space.

I had exactly the same problem with my Wacom Intuos 3 tablet.
The solution is to go into Control Panel>Administrative Tools>Computer Management>Device Manager>Human Interface Devices and disable Wacom Virtual Hid Driver.
I found that somewhere on the Wacom site and it does it for me.
I'm not sure but I think it started when I updated the Wacom drivers to try and solve another problem.
Can I ask, if you press CNTRL-ALT-DEL to start task manager, does that disable your pen until you select the Task Manager button? That came with the latest driver too.
Brian

OS 10.6 and PS CS3 problems

Similar Messages

Maybe you are looking for