OS 8.6 and USB flash drive

Is there software that will allow me to save my old documents and photos from my G3 iMac to a USB flash drive? Or is it not a software problem. I guess all flash drives are now USB 2.0. Any other ideas to salvage my old files?

I tried http://docs.info.apple.com/article.html?artnum=60394
Unfortunately, the software installation failed, see below. When following your instructions for my G3 iMac running Mac OS D1-8.6 and a 96MB hard drive, the computer froze during the Install Software part of the installation routine after clicking the Start and the Continue buttons even though all other software was off. Does anybody have a suggestion what may have caused this? Perhaps my non Apple-authorized SCSI board which I put in myself years ago?
Thanks
Joerg

Similar Messages

Mounting NTFS,FAT32 and USB FLASH drive

Problem and problem!!
I am going to fade up with Solaris 10. Please somebody help me!!
Problem is with mounting my FAT32, NTFS partitions and USB flash drive (twinmos).
How can I mount FAT32, NTFS file system and my USB flash drive in Solaris 10??

cN: the N'th disk controller installed in the system
tN: the SCSI TARGET id. Also used for atapi, firewire and usb mass
storage device, but it's always 0. Use to identify a specific disk
device on the disk controller.
dN: the SCSI LUN id. For atapi devices this is 0 for master device,
1 for the slave device. For usb mass storge devices this field could
contain a value > 0 - for example usb flash card readers often
present the slots for the various flash card formats as multiple LUNs. For simple usb flash memory sticks, this should be
LUN 0.
sN: the slice N from the SunOS disk label. On a media without a
disk label, slice 2 can be used to access all of the medias contents. Solaris SPARC supports slices s0 - s7, Solaris x86
slices s0 - s15.
pN: on Solaris x86 only: p0 is the whole disk (similar to slice s2,
when there's no SunOS disk label), p1 - p4 are the four primary
fdisk partitions.
The ":c" suffix assumes the media contains the fat filesystem in
a separate fdisk partition, searches the fdisk partition table for
the first partition containing a fat filesystem, and mounts the
filesystem from that partition. On Solaris x86, instead of using
"p0:c" you could also use one of the p1 - p4 device; but the pN
fdisk slices don't exist on Solaris SPARC.

Rhapsody and USB flash drive.

I recently downloaded Rhapsody in order to transfer my music files to my Samsung Phone. That works great.
I like the program so much I have tried to make it my primary music program on my PC
I'm having a problem however. If I have a USB flash drive plugged into my computer, Rhapsody will not run. It locks up.
If Rhapsody is running and I plug in a flash drive, Rhapsody locks up.
I am running Windows XP. 3.2 Gig dual core processor, 3.25gig of ram.
Anyone else encounter this? What am I doing wrong? Is there a fix?
Thanks.

This is more a compatibility issue with your computer and the program itself. You will need to contact Rhapsody support for further troubleshooting. Here is the link for support Click Here

Time Maching backup and USB flash drives problem with TC

I have a time capsule that is currently backing up my computer for the first time. I want to add a USB hub to the USB port so I can add my flash drives and setup a printer wirelessly. I plugged in one of my flash drives into the USB port and a folder popped up that was titled "NO NAME". Is there any reason why TC isn't recognizing this as a disk and letting me move files to/from the flash drive. Additionally, is there anyway to backup the day-to-day Time Machine files to the flash drives instead of to the TC, or would this not be recommended?
Thanks to all who can help!

I have successfully mounted a USB flash drive but had to first reformat and name it using Disk utility. I am also using a USB hub with an external 750G drive attached through the USB hub.

How do I safely remove my sd card and usb flash drives from my iMac?

iMac newbie here. After years of PC messes and crashes I finally converted to iMac. However it's not always easy to find what I am looking for. The first time I disconnected a usb flash drive a warning appeared on the screen. I neglected to jot down the instructions. Now I want to remove the SD card for my phone, and I don't want to mess anything up. Can someone point me in the right direction? Thanks.

You posted in the iMac forum; to properly dismount any external drive from a Mac, drag its' icon to the trash can. Then you can unplug it. I don't have an iphone, so I can't answer that. You'd get more knowledgeable answers for that question in an iPhone forum.

External hard drive library and USB flash drive

My iPhoto library is located on my external hard drive (laptop HD too full). I'll bed traveling for Xmas, so copied about 1GB of pics (organized into an album) to the flash drive to take with me. Once disconnected from the external drive (where the library is), how do I access the flash drive pics on my laptop? Will not iPhoto try to find the (disconnected) library?

Hi there
1. How did you copy the 'album' to the flash drive? You can't really export albums, as they are a virtual entity. only the pics therein.
2. On your laptop, connect the flash drive to it and go iPhoto -> File -> Import and imprt them into the Library.
Regards
TD

Filevault 2 encryption and USB flash drives in Lion 10.7.1

I have my harddrive on my MacBook Air encrypted with File Vault 2 under Lion 10.7.1 Seems to work fine until I try and backup using time machine. Its very very very slow. - its saying it will take days to back up 90GB to a 256GB USB memory stick.
I thien tried to copy about 40GB of files to the stick and it was much faster - about 2 hours.
I thought that these files would be encrypted and unreadable on other macs? I plugged the stick into another mac and read the files just fine? I want them to be encryoted - does FV 2 support this capability?

If you copy files from an encrypted volume to an unencrypted one, the copies will be unencrypted. Using Disk Utility, you can format the USB device as Mac OS X Encrypted.

How to burn a powerpoint 2013 presentation to a DVD R and or USB flash drive.

My Powerpoint 2013 slideshow includes photo's, clip art with transitions and animations and embedded music.   I want to
burn this presentation to either a DVD disk or a USB flash drive and send it to a friend.   My friend has a windows 7 desktop
computer and a DVD player attached to a TV.   Ideally I want to know how to burn the presentation to a DVD so that the presentation can be played back on the TV using the DVD player.    I do not want to lose any of the transitions
or animations when I burn the presentation to a DVD.          I know most TV's have a USB connection but have no idea how this works if the
presentation is copied to a USB flash drive.   What are my best options to keep the integrity of the presentation intact, and how do I go about doing this?   I need detailed instructions please.   Thanks in advance
for your assistance.

Hi,
The factor of keeping the integrity of presentation when you burn this presentation to either a DVD disk or a USB flash drive depends on performance of DVD disk and USB flash drive.
There are two ways to put PowerPoint presentation on a DVD convert PPT to video.
1. Convert PPT Files To DVD is to use a screen capture software.
2. Convert and Burn PowerPoint Presentation onto DVD would be to use a professional PowerPoint to DVD converter software.
For more detail information:
http://worldclassmedia.com/how-to-convert-powerpoint-files-to-dvd-put-a-powerpoint-presentation-on-tv/
If your TV doesn’t have built-in processors or Windows installed, it can’t run PowerPoint presentations in their native environment from a USB connectors. If so, you should convert it to video format first.
Detail information:
http://www.free-power-point-templates.com/articles/methods-to-play-powerpoint-on-tv/
Feel free to post back.

USB Flash Drive no longer shows on Desktop, it does appear in disk utility. I recently upgraded to 10.8 from 10.6 on both iMac and Macbook and the drive does the same on both.

I updated my Snow Leopard to Mountain Lion and have had only minor issues with some software but I plugged in a USB flash drive and went to format it, it now appears only in disk utility and not on the desktop. I have tried restarting and reseting with the drive in and out, I tried it into my macbook and it does exactly the same there. I can't do anything in Disk Utility so can't access it in any way and it says errors if I try to eject it from DU. I'm not normally stumped but I can't figure this out at all. I'm hoping that someone here could give me an idea that I haven't thought of as it's a large Flash Drive and I really would like to keep using it.
Thanks in advance for any help anyone can offer.

If it has the same (bad) behavior on two different systems then there is a very good chance that the drive is toast.
BTW you'll get better response to your questions if the question actually reflects the problem you are having. In this case it would have been better to say you couldn't access the drive rather then that it doesn't show on the desktop.
regards

If i use a usb flash drive which is both os and windows compatible can i transfer files from my mac to a windows pc using the same usb flash drive?

if i use a usb flash drive which is mac os and windows compatible can i use it to copy files from the mac to a windows machine. i have to do some training abroad and wnat to take the files on a usb from the mac but they will only have a windows operating system available to me.

Generally, it's not the flash drive that makes it compatible, but the formatting used on it. In Disk Utility on a Mac, the format is called MS-DOS (FAT). In Windows, I believe it is called FAT32.
A USB flash drive formatted that way should be readable and writable on both Mac OS X and Windows. But you may want to try a "trial run" before relying on it for the trip.

Usb flash drive partitions and view partitions in windows 7 or 8 O.S using C or C++ or C#

I want to make 2 partitions in usb flash drive. How can a usb can be partitioned using C or C++ or C# languages? And these partitions can be able to see either in a tool or in windows o.s

Hi,
Your issue is out of support range of VS General Question forum which mainly discusses the usage issue of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Maybe you can try to consult on this forum:
https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?forum=wdk
Anyway, I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do i install and boot mac os 10.4 on a usb flash drive?

i want to make a bootable flash drive for my powerbook g4 and i have a mac os 10.4 on a install disk.. i want to be able to boot from the flash drive.

At some point in the past, when the hardware was more recent, some said they
were able to make it work. To boot a PowerPC G4 iBook (USB2.0 ports) from a
USB flash drive memory device. The read/write speed of the USB flash had to
be optimal and the capacity large enough to accommodate the booting and also
the necessity for Virtual Memory to run on the USB flash drive, as with a HDD.
Some suggested they made a clone of a working system, boot from USB flash.
https://www.google.com/?gws_rd=ssl#q=ibook+g4+boot+from+usb
There still are some bits and pieces of information pointing to discussions or
other topics of similar concept; some of the older sites aren't online any more
where claims and 'proof' were given that this worked out OK. Figuring the older
Apple portables were adapted to use CF or other camera memory cards, for use
in systems prior to OS X...
Sounds like a fun diversion, to take ones mind off weather, and other incidentals.

When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?

When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?

You can't reformat it and not wipe everything on it.
Have you tried a different USB port?
Only other option, back it up on a different computer.

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

MacDrive to provide better HFS support.
And to acces and write.

Trying to format a new USB flash drive so it will work on both a Mac and PC

I have a brand new Sandisk USB flash drive that I am trying to copy movie files onto from my Mac's hard drive. For some reason I can copy one of the movie files but not the other, even though they are both Quicktime (.mov) files. In doing some research, it seems the one file will not copy/paste likely because it is over 4 GB in size and the FAT32 filing system on the USB drive prevents files in excess of this size to be copied and pasted.
My question to anyone who can help me is: How can I get files over 4 GB onto and off of this USB drive AND be able to use it for both Mac and PC computers?
Thanks for any advice.
Shaun

If I format the USB stick on my Mac as exFAT, will my client who´s most likely using a PC be able to screen it tomorrow morning...??
exFAT would only be an issue if they were running a version of Windows older than XP. If it is XP, they would need to install the free exFAT update before being able to access the drive.

OS 8.6 and USB flash drive

Similar Messages

Maybe you are looking for