OS Authentication in 11g

I have upgraded from 9iR2 to 11g and cannot get OPS$ROOT to work as an OS authenticated account. It just gives invalid username or password.
Other accounts with OP$ prefix are working OK.
Any ideas anyone ?

Thanks very much Jas - That worked
The Metalink article does not seem to mention which versions it applies to so I guess from its age it was a 10g thing.
The "not recommended" seems to be because sydba tasks should be done by oracle. However we are not using this account for administrative tasks, just straightforward reports. The only reason for doing so is that they are initiated from the root crontab.

Similar Messages

By pass authentication obiee 11g

How to bypass the authentication in obiee 11g? I could not seeAUTHENTICATION_TYPE=BYPASS_NQS in NQSConfig.ini file.
Thanks,
Surya

Hey,
I dont think there is such option available in 11g anymore as the authentication is basically taken to the weblogic application server now. I haven't tried this but below might work for you. Please try and let me know if you have success with it:
Login in weblogic console and navigate to the following location:
1) Home >Summary of Security Realms >myrealm >Providers
2) Lock and Edit, and set the Control Flag to optional on all the providers you have setup. ( if you haven't integrated with any Ad's other than the default out of the box Authenticator, then there is only one place you have to change this.
3) Save the changes, and bounce all the services in order for changes to take effect.
You should now be able to login without entering the password into analytics in theory.
Let us know the results.
Thanks,
-Amith.

Weblogic HTTP Authentication on 11g webservice

Hi all
We are recently migrating webservice from 10g to 11g, but keep 10g client use for connecting the new 11g interface. Due to previous technical limitation, the 10g client is found failed to connect 11g and thus we built a middleware between them. The webservice server side (11g) is protected with HTTP authentication on weblogic and we found that both 11g client and the middleware can connect the server side successfully authenticated. Only when we use the 10g to connect the middleware, server side blocks the transaction with error code 401 unauthorized. Can everybody know any tricks behind, thanks.
11g ws client -----> [HTTP AUTH] --------> 11g server side [ OK ]
Middleware -> 11g ws client ------> [HTTP AUTH] -------> 11g server side [ OK ]
10g client --------> Middleware -> 11g ws client ------> [HTTP AUTH] -------> 11g server side [ FAILED ]
Cheers
Chris
Edited by: Nexus Chris on Dec 17, 2012 10:13 AM
Edited by: Nexus Chris on Dec 17, 2012 10:13 AM

Hi,
guess this is the wrong forum and you should post this question on the WLS or SOA forum here on OTN. I imagine that the two services a different in the way that 10g is JAX-RCP and 11g uses JAX-WS. Anyway, the two forums I mentioned may be best to get this sorted
Frank

Pass-Thru Authentication OIM 11g

Is there any documentation on configuring pass-thru authentication in OIM to an AD or LDAP instance?
Thanks

Apparently, this does not exists for OIM. I need to put a OAM instance in front of OIM in order to authenticate against AD

Dbms authentication in OBIEE 11.1.1.7.1

Hi all,
I have a problem with configuring dbms authentication in obiee 11.1.1.7.1. I followed the document below, and made all the steps.
Using Alternative Authentication Providers - 11g Release 1 (11.1.1)
Now, my problem is none of my dbms users can login to analytics. I can login using weblogic users, but when I try to search for any of the users from analytics, I get invalid GUID error. (I refreshed GUIDs, this is not related) According to debug steps my problem should be with adapters since I can login to em console with my db users after giving privilage, but I don't know what is wrong. Error from nqserver.log is below.
[tid: 152c] An error message was received from the BI Security Service: SecurityService::populateBIUserFromUserProfileUser XXXXXX has invalid guid 41414B494E4C49
[tid: 152c] An error message was received from the BI Security Service: SecurityService::populateBIUserFromUserProfileUser XXXXXX has invalid guid 41414B494E4C49 [[
[nQSError: 43113] Message returned from OBIS.
[tid: 152c] SecurityService::populateBIUserFromUserProfileUser XXXXXX has invalid guid 47434554494E4552
[tid: 152c] [nQSError: 43126] Authentication failed: invalid user/password.
[tid: 152c] SecurityService::populateBIUserFromUserProfileUser XXXXXX has invalid guid 47434554494E4552
[tid: 152c] [nQSError: 43126] Authentication failed: invalid user/password.
What do you think the problem could be? Any help would be appreciated.
Were anyone able to configure dbms authentication with 11.1.1.7.1 or 11.1.1.7?
Regards,
Seth

Hi Seth,
I also facing the same issue in 7.0 and 7.1,
Have you resolved this issue?
if yes, please share me the solution.
thank you in advance.

Unable to login to the analytics

Hi
I tried to set up the Microsoft active directory after that the analytics windows is not opening and all the servers are up.I thought that this because of trying to install Microsoft active directory and cancelled the steps what i have done and restarted the services. Still it is(analytics) not opening but iam able to open console,em.It is displaying username and password you entered is wrong.can any one get me out of this
Regards
sree

Sreekanth,
How about steps at http://docs.oracle.com/cd/E28280_01/bi.1111/e10543/img/bisystem_cred.gif
and also virtualize=true settings.
just in case refer this Using Alternative Authentication Providers - 11g Release 1 (11.1.1)
or else Marks note.
If helps mark
~ http://cool-bi.com

Kerberos Authentication between Sharepoint 2013 Foundation - SSRS 2012 - Oracle 11g failing with ORA-12638: Credential retrieval failed

I have set up SharePoint 2013 Foundation, SharePoint Reporting Services and SQL Server 2012 in a single server. I then created a Data Connection to Oracle 11g. Upon testing the connection, it throws the error “ORA-12638: Credential retrieval failed”.
Given below are the steps of installation and configuration.
Installation till basic authentication:
The installation has been done in a
single server.
Installed SQL Server 2012 (Developer version).
Selected only the following features:
Database Engine Services
Analysis Services
Reporting Services – SharePoint
Reporting Services Add-in for SharePoint Products
Management Tools – Basic
- Management Tools - Complete
2. Installed SQL Server 2012 SP1.
3. Installed SQL Server 2012 SP2.
  4. Installed SharePoint Foundation 2013.
5. Created web application (without Kerberos; we did not even create the SPNs).
      The application pool has been configured to use Reporting Services account since it is a single server installation. This account has been registered as a managed
account.
6. Created Site Collection.
7. Verified that Reporting Services is not installed.
8. Installed SharePoint Reporting Services from SharePoint 2013 Management Shell.
9. Verified that Reporting Services is installed.
10. Created a new SQL Server Reporting Services Service Application and associated the Web Application to the new SQL server Reporting Services Service Application.
11. Verified that SQL Server Reporting Services Service Application and its proxy have started. Reset IIS.
12. Created a Site.
  13. Created a Data Connection library with “Report Data Source” content type.
14. Created a Report Model library with “Report Builder Model” content type.
15. Created a Report library with “Report Builder Report” content type.
16. Uploaded an SMDL to the Report Model library.
  17. Added the top level site to Local Intranet instead of as a Trusted Site in the browser settings.
  18. Able to create and save a report using Report Builder.
Hence, basic authentication is working and SSRS is able to connect to Oracle database.
Next we have to configure Kerberos settings between SharePoint and SQL Server.
Implementation of Kerberos authentication
In the Report Server machine, opened the file C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config and added the Authentication Types of RSWindowsNegotiate
and RSWindowsKerberos.
2. Set up the following SPNs.
               a) SQL Server Database Engine service (sqlDbSrv2):
                setspn -S MSSQLSvc/CER1110:1433 CERDEMO\sqlDbSrv2
                setspn -S MSSQLSvc/CER1110.cer.demo.com:1433 CERDEMO\sqlDbSrv2
             In the Delegation tab of the account, selected "Trust this user for delegation to any service (Kerberos only)".
b) Account: SharePoint Setup Admin account (spAdmin2)
     setspn -S HTTP/CER1110:9999 CERDEMO\spAdmin2
                setspn -S HTTP/CER1110.cer.demo.com:9999 CERDEMO\spAdmin2
                In the Delegation tab of the account, selected "Trust this user for delegation to any  service
(Kerberos only)".
c) Account: SQL Server Reporting Service account (sqlRepSrv2)
                   setspn -S HTTP/CER1110 CERDEMO\sqlRepSrv2
                   setspn -S HTTP/CER1110.cer.demo.com CERDEMO\sqlRepSrv2
                   In the Delegation tab of the account, selected "Trust this user for delegation to any service
(Kerberos only)".
3. Configure the Web Application to use “Negotiate (Kerberos)”.
4. Logged in as SharePoint Administrator to the SharePoint server and opened the top level site in the IE browser.
     The Event Viewer logged the login process for the SharePoint Administration account as
Negotiate and not Kerberos.
5. Implemented Kerberos for Oracle database and client.
     Able to connect to the Oracle database via Kerberos authentication using SQL Plus.
6. Turn on Windows Firewall.
7. While testing the site's data connection using Kerberos settings, got the error
“Can not convert claims identity to windows token. This may be due to user not logging in using windows credentials.”
      Note: The Data Connection for basic authentication still worked.
8. Created a Claims to Windows Token Service account (spC2WTS2).
9. Started the Claims to Windows Token Service.
10. Registered the Claims to Windows Token Service account as a Managed Account.
11. Changed the Claims To Windows Token Service to use the above managed account.
12. Verified that the Claims to Windows Token Service account (spC2WTS2) is automatically added to the WSS_WPG local group on the SharePoint box.
      Note: The Reporting Services service account is also a part of the WSS_WPG local group.
13. Added the Claims to Windows Token Service account (spC2WTS2) to the Local Admin Group on the machine having the SharePoint App Server.
14. In the SharePoint box, added the Claims to Windows Token Service account (spC2WTS2) in the Act as part of the operating system policy right.
15. The Claims to Windows Token Service account (spC2WTS2) has the WSS_WPG group configured.
      When the C2WTS service was configured to use the managed account Claims to Windows Token Service account (spC2WTS2) earlier, the spC2WTS2 account was automatically
added to the WSS_WPG local group on the SharePoint box. The WSS_WPG group in turn is configured in c2wtshost.exe.config file.
16. Verified that the Reporting Services account is a managed account and part of the WSS_WPG group.
17. Earlier Service Application Pool - SQL Server Reporting Services App Pool service was associated with the SharePoint Admin account.
      Changed this to associate the Reporting Service account with the Service Application Pool - SQL Server Reporting Services App Pool service.
18. Changed the delegation of the Reporting Service account to constrained delegation with Protocol Transitioning. This is because we are transitioning from one authentication scheme (Claims) to another (Windows Token).
      For this, the delegation has been changed to "Trust this user for delegation to specified services only". Also, selected the sub radio button "Use
any authentication protocol". Selected the Oracle Kerberos service as the service to which this account can present delegated credentials.
      Note: The Reporting Service account already had an HTTP SPN.
19. Next, the goal was to make the Claims To Windows Token Service account match the Reporting Service account.
       For this, we created a fake SPN for the Claims To Windows Token Service account since the delegation tab was missing.
       The delegation has been changed to "Trust this user for delegation to specified services only". Also, selected the sub radio button "Use any
authentication protocol". Selected the Oracle Kerberos service as the service to which this account can present delegated credentials.
20. Restarted the SharePoint server.
21. Tested the data connection with the Kerberos settings again.
       Got the error
“ORA-12638: Credential retrieval failed”.
Can anyone tell me what is wrong with this setup?

http://www.freeoraclehelp.com/2011/10/kerberos-authentication-for-oracle.html
Problem4: ORA-12638: Credential retrieval failed
Solution: Make sure that SQLNET.KERBEROS5_CC_NAME is set in sqlnet.ora and okinit has been run before attempting to connect to the database.
Do check
http://webcache.googleusercontent.com/search?q=cache:5a2Pf3FH7vkJ:externaltable.blogspot.com/2012/06/kerberos-authentication-and-proxy-users.html+&cd=5&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/

How to remove custom authentication provider in weblogic server 11g

Hi ,
I am trying to remove the custom authentication provider in weblogic server 11g, It disappears when i delete it from list of authentication providers. But upon server restart it appears again.
Documentation for 10g says delete it from service administration but i couldn't find one in 11g. Please help me in removing the custom authentication provider
Thanks
Sandeep

You can try editing the config.xml file and removing it there. (Re: After provider reorder I cannot login admin server console
If you are referring to a jar file - custom authenticators are usually placed in the <middleware-home>wlserver_10.3/server/lib/mbeantypes/ directory.

OAM 11g: Error while importing Custom Authentication Plug-in.

We are trying to create a sample custom authentication plugin in OAM 11g as per the 11.1.1.5.0 doc.
But while trying to import the plugin via oamconsole (system configuration->Plugins->Import Plugin) we receive an error "Invalid XML Structure".
Do we have to embed the XSD (XML Schema Definition) as well ?
-------------------------SamplePlugin.java-------------------------------------
import oracle.security.am.plugin.ExecutionStatus;
import oracle.security.am.plugin.MonitoringData;
import oracle.security.am.plugin.PluginConfig;
import oracle.security.am.plugin.authn.AuthenticationContext;
import oracle.security.am.plugin.authn.AuthenticationException;
import oracle.security.am.plugin.authn.AbstractAuthenticationPlugIn;
import java.util.Map;
import java.util.logging.Level;
class SamplePlugin extends AbstractAuthenticationPlugIn {
     private static final String CLASS_NAME = "FirstTestClass";
     public ExecutionStatus initialize (PluginConfig config){
          super.initialize(config);
          if(LOGGER.isLoggable(Level.FINE)){
               LOGGER.logp(Level.FINE,CLASS_NAME,"initialize","Entering initialize");
          return ExecutionStatus.SUCCESS;
     @Override
     public String getDescription() {
          // TODO Auto-generated method stub
          return null;
     @Override
     public Map<String, MonitoringData> getMonitoringData() {
          // TODO Auto-generated method stub
          return null;
     @Override
     public String getPluginName() {
          // TODO Auto-generated method stub
          return null;
     @Override
     public int getRevision() {
          // TODO Auto-generated method stub
          return 0;
     @Override
     public ExecutionStatus process(AuthenticationContext arg0)
               throws AuthenticationException {
          if(LOGGER.isLoggable(Level.FINE)){
               LOGGER.logp(Level.FINE,CLASS_NAME,"initialize","Entering process");
          return ExecutionStatus.SUCCESS;
     @Override
     public void setMonitoringStatus(boolean arg0) {
          // TODO Auto-generated method stub
     @Override
     public boolean getMonitoringStatus() {
          // TODO Auto-generated method stub
          return false;
-------------------------SamplePlugin.java-------------------------------------
------------------------SamplePlugin.xml--------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<Plugin name="SamplePlugin" type="Authentication">
<author>Self</author>
<email>[email protected]</email>
<creationDate>09:41:22, 2012-02-05</creationDate>
<version>1</version>
<description>SamplePlugin</description>
<interface>oracle.security.am.plugin.authn.AbstractAuthenticationPlugIn</interface>
<implementation>SamplePlugin</implementation>
</Plugin>
------------------------SamplePlugin.xml--------------------------------
------------------------MANIFEST.MF--------------------------------
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.8.2
Bundle-Version: 1.0.0.qualifier
Bundle-Name: SamplePlugin
Bundle-Activator: SamplePlugin
Bundle-ManifestVersion: 2
Created-By: 1.6.0_24-b07 (Sun Microsystems Inc.)
Import-Package: org.osgi.framework;version="1.3.0",oracle.security.am.
plugin,oracle.security.am.plugin.authn,oracle.security.am.plugin.api,
oracle.security.am.common.utilities.principal,oracle.security.idm,jav
ax.naming,javax.sql,java.management,javax.security.auth
Bundle-SymbolicName: SamplePlugin
Bundle-RequiredExecutionEnvironment: JavaSE-1.6
------------------------MANIFEST.MF--------------------------------
Contents of SamplePlugin.jar
1. SamplePlugin.xml
2. SamplePlugin.class
3. META-INF/
MANIFEST.MF

I build the Plugin.jar file similarly as above(followed the same steps)..
But when i log into OAM and trying to import the plugin (System Configuration->Plugins- Import Plugin) the browser goes to hung state and i see below error in logs (domain log and in diag log)
I see the jar file created in this location (\Middleware\user_projects\domains\IAMdomain\oam\plugins)
Please let me know if you have any idea..Thanks!
####<Feb 29, 2012 1:10:03 PM PST> <Warning> <oracle.adf.controller.internal.metadata.MetadataService> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-00000000000003fe> <1330549803273> <BEA-000000> <ADFc: /WEB-INF/adfc-config.xml: >
####<Feb 29, 2012 1:10:03 PM PST> <Warning> <oracle.adf.controller.internal.metadata.MetadataService> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-00000000000003fe> <1330549803274> <ADFC-52024> <ADFc: Duplicate managed bean definition for 'accessCheck' detected.>
####<Feb 29, 2012 1:10:03 PM PST> <Warning> <oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-0000000000000402> <1330549803479> <ADF_FACES-60099> <The region component with id: pt1:_lar has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.>
####<Feb 29, 2012 1:10:33 PM PST> <Error> <javax.enterprise.resource.webcontainer.jsf.application> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-0000000000000593> <1330549833253> <BEA-000000> <java.lang.NullPointerException
javax.faces.el.EvaluationException: java.lang.NullPointerException
     at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190
####<Feb 29, 2012 1:10:33 PM PST> <Warning> <oracle.adfinternal.view.faces.lifecycle.LifecycleImpl> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-0000000000000593> <1330549833316> <BEA-000000> <ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase INVOKE_APPLICATION 5
javax.faces.FacesException: #{FileProcessor.doUpload}: java.lang.NullPointerException
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:118)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
     at oracle.adf.view.rich.component.rich.RichPopup$BroadcastContextCallback.invokeContextCallback(RichPopup.java:666)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBa
>
####<Feb 29, 2012 1:10:33 PM PST> <Error> <oracle.oam.admin.console.policy> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-0000000000000593> <1330549833361> <OAM-400016> <Failed to authenticate the user
javax.servlet.ServletException: java.lang.NullPointerException
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
####<Feb 29, 2012 1:10:34 PM PST> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-000000000000059a> <1330549834008> <ADF_FACES-00009> <Error processing viewId: /plugin-taskflow/authplugins URI: /oracle/security/am/taskflows/authplugin.jsff actual-URI: /oracle/security/am/taskflows/authplugin.jsff.
javax.el.ELException: java.lang.NullPointerException
     at javax.el.BeanELResolver.getValue(BeanELResolver.java:266)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:173)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelCollectionRenderer$PanelCollectionHelper._encodeAll(PanelCollectionRenderer.java:728)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelCollectionRenderer$PanelCollectionHelper.access$500(PanelCollectionRenderer.java:537)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelCollectionRenderer.encodeAll(PanelCollectionRenderer.java:402)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
####<Feb 29, 2012 1:10:34 PM PST> <Warning> <oracle.adfinternal.view.faces.lifecycle.LifecycleImpl> <spsolutions> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d6305b57ff260991:700b4664:135ca3d69dc:-8000-000000000000059a> <1330549834020> <BEA-000000> <ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.faces.FacesException: javax.el.ELException: java.lang.NullPointerException
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:804)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:294)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:214)

Authentication Error while Configue SOA in JDev 11g TP4

Hi everyone.
I'm trying to configure SOA suite 11g in my local system. I have done the schema creation and already created a App server connection in JDev->Tools-> Java EE Runtime Preferences.
When I start the configue SOA, it failes to start or stop the oc4j instance as below phase:
[echo] Changing oc4j ports with following values:
HTTP Port : 8988 -> 8888
RMI Port : 23891 -> 12401
RMI SSL Port: 24043 -> 24043
JMS Port : 9227 -> 12601
[echo] Create jms queues/topics from new oc4j jms template
[echo] Changing jms.xml to use port : 12601
[echo]
* Configuring SOA Infrastructure. This will take 5-10 minutes. *
* Summary of SOA configuration parameters: *
** Oracle Home = F:\jdeveloper11g\
** Oracle Instance = F:\jdevinstance\system11.1.1.0.22.49.49
** SOA Database = localhost:1521:XE
** SOA Database User = jdev_soainfra
** HTTP Port = 8888
** RMI Port = 12401
** JMS Port = 12601
** Component Type = o.j2ee
** Component Name = embedded-oc4j
** Configure OWSM = false
** Configure SOA Console = true
** Configure B2B UI = false
** Configure XEngine = false
[echo] ==Stopping oc4j standalone...
[exec] Result: 1
[echo] ==Waiting max 240 second(s) for shutdown of URL http://ESFANDIYAR:8888...
BUILD FAILED
F:\jdeveloper11g\install\bpel\build.xml:10: The following error occurred while executing this line:
F:\jdeveloper11g\install\bpel\soa-infra-config.xml:48: The following error occurred while executing this line:
F:\jdeveloper11g\install\bpel\soa-infra-config.xml:89: ***************************************************
* Configuring SOA Infrastructure has FAILED.
* If following log files exists, please check them for possible cause:
* F:\jdevinstance\system11.1.1.0.22.49.49\o.j2ee\embedded-oc4j\install\tmp\soa-infra-java.log
* F:\jdevinstance\system11.1.1.0.22.49.49\o.j2ee\embedded-oc4j\log\startsoa.log
Total time: 4 minutes 23 seconds
I checked the log file and it says it is encountered an authentication error. I'm wondering which user name and password it is referring and where shall I set the correct values. During the app server connection, I have entered the proper value for oc4jadmin/password.
Aug 30, 2008 11:37:00 PM oracle.j2ee.util.AnnotatedLogger logWithThrowable
WARNING: J2EE JNDI-00005
Authentication failed when trying to connect to the server. You need to provide a valid username and password.
Caused by:class javax.naming.AuthenticationException: Not authorized
oracle.oc4j.admin.deploy.cmdline.AdminCommandException:
Failed to connect to the server with deployment URI (deployer:oc4j:ESFANDIYAR:12401). Please refer to the exception trace from server above to identify the cause.
     at oracle.oc4j.admin.deploy.cmdline.AdminCommandBase.execute(AdminCommandBase.java:54)
     at oracle.oc4j.admin.deploy.cmdline.Oc4jAdminCmdline.executeCommand(Oc4jAdminCmdline.java:107)
     at oracle.oc4j.admin.deploy.cmdline.Oc4jAdminCmdline.main(Oc4jAdminCmdline.java:71)
Thanks for any help.
Esfand

Hi Heidi,
I tried once again to install a fresh instance of Oracle soa suite 10.1.3.0 and upgraded it to 10.1.3.4 successfully. I did all the JDeveloper 11g installation and configure SOA process all successfully. I can create a connection to OC4J using 12401 RMI port successfully but none of my applications are deployed to server.
This message is repeatedly displaying in messages tab:
Exception returned by remote server: com.evermind.server.rmi.RMIConnectionException: Disconnected: oracle.oc4j.admin.management.shared.SharedModuleType. local class incompatible during deploy ...
The default OC4J RMI port is 23791 but in my installation it is set to 12401 when I checked the Runtime Port option of Oracle Application Server and the connection is fine with this port but applications can not be deployed with this configuration.
I can deploy applications on separate standalone OC4J instance successfully but not able to do it with my SOA application server.
Any comments will be appreciated.
Thanks again
Esfand
Edited by: user3788199 on Sep 8, 2008 6:50 AM

External Table Authentication in OBIEE 11g

Hi ,
I have a security table, which contains userid,displayname,group . I have imported Security table in Physical Layer. I'm creating session variables based on condition.
When am trying to logging into analytic s getting an error, invalid username and password . I'm using 11.1.1.6.0 version
How to handle external table authentication in OBIEE 11g version.
Regards,
Malli

Hi fiaz,
That links talks about 10g version.
Step1: We have imported a secutiry table in Physical layer.
Step2: Creating a session variable by selecting initilazation block.
Select user_name,group from security_table where user_id=':USER' and pwd=':password';
step3: created DISPLAYNAME,GROUP & USER VARIABLES in edit target window
After these modifications i was trying to logging with new user, which is there in security table.
I am getting an error that is invalid user or password.
Is there any other changes does it required here.
Regards,
Malli
Edited by: user10675696 on Dec 26, 2012 9:39 PM

OBIEE 11g - Weblogic Authentication Denied

Hello All,
I did install OBIEE 11g 11.1.1.3.3 in my personal PC which has windows XP SP3 and I did choose "Enterprise Installation" as an option.
Before installing this I did install the Loop Back Adapter and also set the IP address in the Host file ( 10.10.10.10 Mycomputername mycompany.com).
Installation went through very much fine no errors at all. Analytics page was opened after the installation and When I gave the weblogic Credentials it was Unable to sign in.
When I tried to login to Weblogic Console it says "Authentication Denied".
Checked the services Weblogic Node manager started but Oracle Process Manager(instance1) did not start (1053 the service couldn't start in a timely fashion).
Then I tried to StartBIServices from Start-> Allprograms->Oracle Business Intelligence gave Weblogic Credentials .... 2 cmd prompts were opened and all services are started and also the anlaytics page was opened and gave the credentials again same error "Unable to sign in" and agin tried to login to weblogic the same error "Authentication Denied". This is really strange....
I thought this is something to do with rebooting the system after installation. So I restarted the system and started the services Weblogic Node Manager and Oracle Process Manager (instance1).
This time both of them were started.
Again tried to start the BI services Start-> Allprograms->Oracle Business Intelligence , gave the credentials ... this time only one cmd prompt was opened and it says weblogic authentication denied and its forcefully shut down and Other cmd prompt stopped at WLS.alive...
Here is the Detail Log from Adminserver.log:
<Apr 18, 2011 12:34:57 AM PDT> <Critical> <WebLogicServer> <kanna> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1303112097109> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:965)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic denied
     at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
     at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
     at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
     at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
     at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
     at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
     at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
     at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy22.login(Unknown Source)
     at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:91)
     at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy40.authenticate(Unknown Source)
     at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
     at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<Apr 18, 2011 12:34:57 AM PDT> <Notice> <WebLogicServer> <kanna> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1303112097156> <BEA-000365> <Server state changed to FAILED>
####<Apr 18, 2011 12:34:57 AM PDT> <Error> <WebLogicServer> <kanna> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1303112097156> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Apr 18, 2011 12:34:57 AM PDT> <Notice> <WebLogicServer> <kanna> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1303112097156> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Apr 18, 2011 12:34:57 AM PDT> <Info> <WebLogicServer> <kanna> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1303112097172> <BEA-000236> <Stopping execute threads.>
Checked the Opmnctl Status through cmd prmpt:
coreapplication-obiccs1 - Alive
coreapplication-obisch1 - Alive
coreapplication-obijh1 - Alive
coreapplication-obips1 - Alive
coreapplication-obis1 - Alive
I dont know if the weblogic user or password got corrupted ............???
So I tried to reset the password by adding the Boot.properties file in the following path:
C:\OBIEE11gfmw\user_projects\domains\bifoundation_domain\servers\AdminServer\security
giving username=weblogic
password =password123 in the file but no use still the same error.
Did anybody got the same error ?
Please help me.....
Thanks in Advance...
Regards
Kanna
Edited by: Kanna on Apr 18, 2011 1:14 AM
Edited by: Kanna on Apr 18, 2011 10:45 AM

Yes, but my username and password was simple and straight its weblogic/password123...
Do you guys know how to reset the weblogic Admin password ?
I want to try to debug this error first...... If I couldn't get any help anyhow I am going to Deinstall...
but this shouldn't be the case evrytime.... because we are facing the same problem in our company ...Where we installed 11g in one of our DEV environments...
There should be a some solution for this problem...
Is there anything that I am doing wrong?
Do I need to provide more information from Logs to understand the problem?
Thanks
Kanna

Oracle ADF 11g – Authentication using Custom ADF Login Form Problem

Hi Guys,
I am trying to Authenticate my adf application using custom Login Form.
following this..
http://www.fireboxtraining.com/blog/2012/02/09/oracle-adf-11g-authentication-using-custom-adf-login-form/#respond
But my Login Page is not Loading.I think its sending request in chain.my jdev version is 11.1.1.5.Any Idea.
Thanks,
Raul

Hi Frank,
I deleted bounded code and In another Unit Test I created a simple login.jspx page and applied form based authentication but still facing same problem means something wrong in starting.
My login.jspx page is
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document id="d1" >
      <af:form id="f1" >
        <af:panelFormLayout id="pfl1">
          <af:inputText label="USERNAME" id="it1"
                        />
          <af:inputText label="PASSWORD" id="it2"
                          />
          <af:commandButton text="LOG IN" id="cb1" />
          <f:facet name="footer">
          </f:facet>
        </af:panelFormLayout>
      </af:form>
    </af:document>
</f:view>
</jsp:root>
Don't know wht real problem is

External Authentication in OAM 11g

Hi All,
I need to implement External Authentication (Entrust TruePass) integrate with Oracle Access Manager. Entrust Truepass is always create base64 encrypted HTTP header. Now how can we decrypt the base64 encrypted HTTP Header and read the user DN and inetegrate with Oracle Access Manager.
I need assist to implemen the same...

Hi,
We need to integrate TruePass (IIS6 + OAM 10g WebGate) and OAM 11g. Did you manage to do this? And how?
Thx,
B.

How to implement Custom Authentication and Authorization in Oracle SOA 11g

Can anyone please tell me, how to implement Custom Authentication in Oracle SOA 11g ?
Because in Oracle SOA 10.1.3.4 , i have implemented this custom authentication and authorization by implementing BPMAuthenticationService, BPMAuthorizationService, BPMIdentityService to verify againt my database systems.
implementation classes like the mentioned below
1).
public class SampleAuthenticationService extends SampleServiceBase implements BPMAuthenticationService {
2).
public class SampleAuthorizationService extends SampleServiceBase implements BPMAuthorizationService {
3).
public class SampleIdentityService extends SampleServiceBase implements BPMIdentityService {
Please help me to implement the authentication and authorization in Oracle SOA 11g .
thanks in advance

To start with please go through following document
http://docs.oracle.com/cd/E21764_01/integration.1111/e10231/adptr_jms.htm
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_file.htm
Regards
Arpit

OS Authentication in 11g

Similar Messages

Maybe you are looking for