OS command before file processing in Sender File adapter

Hi there,
I'm having troubles running a os command from the sender file (NFS) adapter. The batch file which I try to run is not getting executed at all.
When I manually run the same batch file from the command prompt then it works perfectly.
The OS command looks like this from the adapter config:
myserver\xi\interface\in\dothis.bat
I have also try with this notation
G:\myserver\xi\interface\in\dothis.bat
Please give me some tips how can I solve this problem, is there any way how can I debug the OS command? When I look at the adapter monitonr no errors are showed.
Thanks for any tips.
Roberto

Hi all,
The problem is solved.
Issue: File Receiver Channel does not execute the OS Command before message processing.
Reason: XI always expects an input file (in my case the sender communication channel) on the source folder. If no input files are found then the rest of the adapter configuration is not executed at all.
In our scenario the OS command is responsible for retrieving the input files from a FTP server the adapter. SO XI will never trigger the OS Command.
Solution: Place a dummy input file on the source folder , the sender adapter will always read in this file and put it back on the same location.(e.g. using a condition in the receiver determination).
Thanks,
Roberto

Similar Messages

OS command before msg processing: In sender FTP

hi all,
i have a file-to-file scenario.Now i have to pick the latest file from FTP folder based on timestamp.All the files are named in yyyymmdd format .I came to know that i can run an OS command before message processing to delete the old files and keep the latest file in the folder.
But i do know know how to write the script for this particular requirement.Can anybody please help me out with the code???
regards,
Nisheeta

HI,
If you want to delete filenames from Adapter use the following sample code:
File adapter OS Command: D://server_dir//subdir//myCMDfile.bat %F
Batch file:
del %1 new_filename_with_path
OR
Please see the below links
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
OS Command on FTP
OS command line script - Need help
FTP - Run OS Command before file processing
Hope this solves your problem.
Regards
Chilla..

Operating System Command After File Processing in Sender File Adapter

Hello guys,
actually we have different interfaces, and the client to take all the files from only one directory, for example D:/DPI.
Unitl now we had one adapter for every file with the content conversion, so we didn't have problems with that. Now we have the problem that we sould maintain an order processing files.
We thougth that an idea could be to execute one file pointing to D:/DPI and at the Operating System Command put like: copy D:/DPI/file.txt D:/DPI/outbound/file.txt, so when file is executed, we move the next file to another directory where is pointing the adapter. Doing this we have an error on the adapter giving us the message: Could not process due to error: java.lang.NullPointerException
We are using a Windows.
There is anyway to do in our way, or there is a better solution to resolve this problem?
Any other idea to do this?
Many thanks in advance.
Regards,
Xavi.

Helo Guys,
maybe I haven't explained well.
We have one directory with different files. We have one adapter for every file( we need for the content conversion ) using NFS and all the adapters are pointing to the same directory.
The problem is that if we have files A.txt, B.txt and C.txt we need to process in an order.
And the problem we see is that for every file we have one adapter, so for example if we process file A.txt with one adapter, when this part is finished, we want to process file B.txt with another adapter, and the same for the rest of the files.
So the idea we had is to create another directories, and when A.txt has finished move file B.txt to another directory.
However this way is not running, if we log on the PI machine and execute cmd, we can do a copy of one file from one directory to another, but when we put this sentence in the adapter in OS command if we see the adapter log we see an error executing the OS command, but we don't know what is the error, there is no more information.
There is any way to do this or maybe we have to manage in a different way?
Many thanks in advance.
Regards,
Xavi.

OutOfMemory error on large file processing in sender file adapter

Hi Experts,
I got file to IDOC scenario, sender side we are using remote adapter engine, files are processing fine when the size is below 5mb, if the file size is more than 5mb we are getting java.lang.OutOfMemoryError: java heap space. can anyone suggest me what parameter i need to change in order to process more than 5mb.

Hi Praveen,
Suggestion from SAP is not to process huge files at a time. Instead, you can make the into chunks and process.
To increase the heap Memory:
For Java heap-size and other memory requirements, Refer to the following OSS note for details:
Note 723909 - Java VM settings for J2EE 6.40/7.0
Also check out the OSS Note 862405 - XI Configuration Options for Lowering Memory Requirements
There are oss notes available for the Java Heap size settings specific to the OS environment too.
Thanks,

File-FTP command before message processing

Hi experts,
my requirement is as follow :
i have 5 files on my FTP server. All are named FILE_hhssmm.xml
In the configuration of my CC out, i have put as specific file name to get picked 1*.xml
I need a command line in the 'run operating system command before message processing' that renames one of the files as 1FILE_hhssmm.xml so that the files get picked one by one.
I can not manage to do that, i only managed to write a batch file but i only can run it locally...
please, any help would be greatly appreciated...
Kindly,
Jamal

Hi
I have been following this for a while (from other posts as well), you are trying quite hard to get this done
I have couple of ideas...
If you think that this is not going to work, then you can try another solution,
- let the .bat file be scheduled by the scheduler of your OS (this is quite simple) say every 30 mins
- make the .bat file move your input files from your current folder to a child folder
- let XI poll the child folder, every 5 secs or so... anyway your scheduler will send the file only after every 30 mins
- Now you need not rely on the OS command from the Fileadpater of XI
My suspicion (though it is not documented anywhere in help, as far as I know) is that the OS command executes only if there is proper reading of the file (or its presence as per the configuration in adapter settings) & not per polling of the adapter. I infer this from your previous post. but your requirement is peculiar that though the file is present that itself has to have a different name - to be read by adapter...some kind of clashes ??!!.
The problem could be something else also, but the above is a possibility as well..
all the best
Regards
Vishnu

Dynamic File selection using sender FTP adapter

HI
I have a FTP> SOAP scenario. In source i want to pick files based on date.
File names would be like *****date.csv
Is there any way i can pick only files for current date?

Hi ,
You may use run operation system command before message processing option and write a script to rename the file which are of current date and specify that new filename in the sender channel.
Regards,
Beena.

RUN OPERATING SYSTEM COMMAND BEFORE MESSAGE PROCESSING

hi.
just i want to know what is the purpose of run operating system command before message processing,after message processing under file sender adapter.
waiting for your great answer.
bye.
regards.
seeta ram.

Hello Seeta,
let me see if I give it using a simple scenario that I implamented : i nedd to transfer a very large file from one server to the other by XI.
to save space and network traffic I use an OS command before picking up the file to run a zip command to zip the file.
after I transfer the file to the target server I run another OS command after the transfer to unzip the file.
now to your second question:
the before Os command on the target server is used mostly for checks (make sure there isn't a file by that name or backing up existing data)
and the after sender OS command is usualy for backing up or erasing existing files (cause it is done only after the first part was finished succesfully).
Uri Lifshitz.
p.s.
there was a blog obout this titled "XI as a huge file mover"
and you can see a description and my scripts at https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/03/additionaltipsforusingXIasahugefiletransfer%28withbatchscripts%29&

OS level command before message processing

Hello
I am getting the files from the SFTP server through the shell script and expecting to be processed by my File sender adapter.
I have configured my File adapter which will poll the directory into which the shell script gets the file and it is scheduled at say 60 sec duration and i had configured OS level command before message processing.
But when i monitored my communication channel and also my directory I found out that its not executing the OS level command. I tried dropping the dummy file into the directory. This time when checked in comm channel monitoring, it executes the OS level command and gets the file from the SFTP server and adapter polls the SFTP file as well. But i don't want to use dummy file each time.
Is there any way by which we can always make adapter to execute OS level command. I tried various options like Process Empty files etc etc but no luck.
Thanks in advance.
regards
rajeev

Rajeev
How about placing a dummy file of 0 bytes, setting up the 'Handling of Empty Files = Don't create message', Processing mode = 'Test' and then writing a post operating command script as well, to move all the files to archive directory except the dummy file.
Not a clean solution but just a thought.
http://help.sap.com/saphelp_nw70/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm

FTP Adapter with Runtime OS Command before Message Processing

Hi PI Techies,
I have a confusion in using Sender FTP Adapter with Runtime OS Command before Message Processing.
Scenario is like this:
Ftp Adapter has to pick a file from FTP server after it checks that a Blank Marker file exists on PI server AL11 directory say "tmp directory".
For this I am using Runtime OS Command before Message Processing where a shell script will check the existence of Blank Marker file on PI server AL11 and if found , it exits the script and FTP Adpater will then pick the Actual Data File and Process it.
Now Confusion:
I am confused in technical execution of steps by FTP Adapter..
Whether FTP Adapter polling initiates the Interface or Runtime OS command checking the File existence will initiate the Interface?
May be its follish to you guys... but please answer ..
Regards,
Anurag

Hi,
I will take it other way as we need to process the Data File not Marker File ( its just for checking the Data File is completely written on FTP server).
Other way mean " Will Poll for Data.txt File and if found then Runtime OS Command will do connect to FTP and check if Marker File exists, if yes then delete the marker file and read the actual Data File for processing.
Please let me know, if Marker File does not exists on FTP folder, will it still read the Data File or will it exit the Adapter execution?
Your help is much appreciated.
Regards,
Anurag

Runtime OS command before Message processing

Hi all,
I have a scenario where the input file from a particular FTP server has to be moved to XI server and then process the message from there. For this I am trying to use "Runtime OS command before Message processing" My problem is that how do I define it in the normal adapter configuration i.e. File access parameters for the sender.
My Query is:
Now should I use the NFS protocol or the FTP protocol ie.in the File access parameters should I specify the directory from which the file needs to be processed after movement to the XI server or should I specify the FTP server details choosing the FTP protocols.
Also provide me some links on how to configure using OS commands.
Thanks & Regards,
Nithiyanandam

Hi,
U can use NFS ...also for RUN Operating sysyrm command
Try using RUN OPERATING SYSTEM COMMAND AFTER MESSAGE PROCESING and RUN OPERATING SYSTEM COMMAND BEFORE MESSAGE PROCESING.
You just post ur output file in some folder(Target) , lets say /usr/sap/sapout/test/.and the shell script in this path /usr/sap/bin/convert.sh (use ur Rename logic here).
Inside the File access parameters put target directory and filename scehme and for shell script give processing parameters as File construction mode , File type and OS Command and use a space after the shell script name and the %F.
And for input can use it directly.
For the shell script (which u will use to rename the file after processing) you can put anywhere inside /INTERFACE/XI/ but athe time you provide the pat it will be exactly matching as from where you are using the Shell Script and the file at the coressponding places. It shud be in XI. Thats it and u r done.
Check out these links. First one will help you in acheiving want you want.
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
http://help.sap.com/saphelp_nw70/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
I hope this will solve your problem
thanq
krishna
Edited by: krishnachitanya siddavattam on Mar 10, 2008 5:38 AM

What is the use of additional file(s) in sender file adapter?

Hi experts,
what is the use of additional files parameter in sender file adapter?
give me some example.......
Thanks & Regards
E.Ravi Chandra Reddy

Hi,
please check the below link,
you can specify additional files to be included in the XI message as attachments.
http://help.sap.com/saphelp_tm90/helpdata/en/44/692ab8a4b633eae10000000a1553f6/content.htm
Regards

Module processing inside Sender File Adapter

Hello,
I am trying to analyze whether I can create a specialized module inside Sender File Adapter. As of right now, the Sender File Adapter and Receiver as well, assume endSeparator character in the end of each record. For files that do not have this field, it is just on continuous string, I assumed I can create an
     adapter module
     call it BEFORE data in the file is being converted to XML format
     Insert 'nl' character (since the record length is fixed)
     Call regular adapter processing (converting to/from XML)
    However, creating any module inside Sender File Adapter, the payload of the main document is already in XML format. Is there anyway to avoid it?
   Thanks for your help,
         Dmitriy Mindich

It is not possible with the standard functionality.
So maintain the sender file adapter with no conversion, but in the module tab enter following modules:
1. Your module
2. The conversion module (*)
3. The standard module.
(*) for details look here:
Look here:
http://service.sap.com/nw-howtoguides
-> Exchange Infrastructure
-> How To Use the Content Conversion Module in JMS Adapter
Regards
Stefan

File renaming in Sender file adapter usins OS command

Hi Guys ,
Can anyone explain on how to use the rename command in Sender file adapter using OS command parameter.
Thanks,
KC.

Hey
run the following OS command
mv <originalFileName> <newFileName>
This command will copy the <originalFileName> to a new file called <newFileName> and will delete the <originalFileName>
There is no rename command in Unix,mv is used to rename the files
Thanx
Aamir

Operating command before message processing

Hi experts,
i have a file to jdbc scenario.
My problem is that i want to send files that are generated on a ftp seperately.
To do so, i wrote a .bat script to rename the files the way I want, and then the CC takes the file under the specific name I specified.
My script works locally, it renames correctly the files.
But how do i execute my script before the message processing on the files of the FTP ?
I entered the name of the script in the command line, but doesnt work, looks like nothing is launched.
Can i launch my script on the FTP ?
Kind regards,
Jamal

Hi
Check these blogs
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
/people/santhosh.kumarv/blog/2008/07/27/glimpse-at-os-command-yet-another-scenario
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/sap%252bxi%252bfile%252badapter%252bos%252bcommand%252bline%252bfeature
Regards
Vishnu

How to count the number of files read through sender file adapter

Hi ,
I have a scenario where I am reading files from a third party system and trying to send those files to R/3 system .The frequency is 1 file per day .But there can be situation where the source system can put 2 to 3 files in source folder and so XI sender adapter will pick up all the 3 files at time . And I want to send only 1 file at a time to r/3 .
Do you know any way to handle this requirement ?
Thanks ,
Suvarna

Hi,
Like Bhavesh pointed out, you could EOIO as the Quality of Servie in the sender file adapter.
But I guess this would solve your issue only to a certain extent.
Marking this QOS in the sender file adapter would only mean sequential processing of the files. That is, the second file will be sent only when the first file is successfully received by the end system.
It would not ensure that the files are sent only after 15 mins of the first file is sent.
If the 15 mins time period is important, then this needs to be achieved using a BPM which ensures that the messages are sent to the target only every 15 mins.
In case, the frequency of the incoming files is not known (in which case, the having a BPM would be a bad idea) you could use a ztable, which stores the filename and time the file was sent to the R/3.
You could query this table each time, before sending the file data to the R/3
Regards,
Smitha.
Message was edited by:
Smitha Rao

OS command before file processing in Sender File adapter

Similar Messages

Maybe you are looking for