OS X fails to start up: kextd_watch_volumes: couldn't set up diskarb sessio

I put my Macbook Pro to sleep (something it's not very good at) last night, and when I opened it this morning, it had shut itself down. The battery was full, though.
When I attempted to boot OS X, the blue status bar under "Starting OS X" gets to the end, but the system hangs; in time, even the mouse stops responding.
Booting in verbose mode yielded the following suspicious messages:
disk0s2: 0xe0030005 (UNDEFINED).
kextdwatchvolumes: couldn't set up diskarb sessions
diskarb isn't ready yet; we'll try again soon
These repeated several times. Right now I have a light blue blank screen, but the mouse pointer is moving (arrow, not a beach ball)
Any thoughts?

Hi, Anthony.
You wrote: "Invalid node structure"The directory of your startup disk is apparently corrupted. See the "Disk Utility cannot repair the disk" section of my "Resolving Disk, Permission, and Cache Corruption" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Similar Messages

  • Office Professional Plus 2013 - Click to run fails to start - errror message "Couldn't install"

    I have just purchased an new PC with 8.1, and have also purchased Office 2013 via the HUP. Now I am trying to start the download.  After clicking on the link in the email, a "Click to Run" file is downloaded. When I open the file, it fails
    to start the Office 2013 download. I get the message "Couldn't install"
    However after trying several options including compatability and administrator options,  I still get the message "Couldn't install".
    I have checked for compatibility and all checks OK
    I am looking forward to an ideas :)
    Thanks in advance :)
    Richard

    Hi Richard,
    Thanks for your question. I believe that "Couldn't install" is not the complete error message, it would be great that you can copy and paste the entire message here. It's necessary for the investigation.
    Please first check if you have any pre-installed version  (Preview edition) of Office on your PC. If yes, please try to use
    Microsoft Fix It tool to remove any traces of Office from your computer, then try the installation again:
    http://support.microsoft.com/kb/2739501
    You might also need to follow the manually steps mentioned on the same page to delete the related reg keys/folder structures, and then try again.
    Hope this helps.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • J2ee server failed to start: No active userstore is set

    Hi,
    I have troubled in starting J2ee engine the std_server0.out file contains the following description Please help
    Jun 2, 2008 4:19:30 PM   ...xt.<init>(UserContextSpi, Properties) [SAPEngine_System_Thread[impl:5]_11] Fatal: Can not instantiate UserContext with given properties.
      service security ================= ERROR =================
    Core service security failed. J2EE Engine cannot be started.
    com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:181)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
         at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:405)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:84)
         at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:58)
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:135)
         ... 5 more
    com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:181)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
         at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:405)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:84)
         at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:58)
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:135)
         ... 5 more
    [Framework -> criticalShutdown] Core service security failed. J2EE Engine cannot be started.
    Jun 2, 2008 4:19:30 PM              com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_11] Fatal: Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.
    Thanks & Regards,
    Bhupinder Singh

    Hi below is dev_server0 content and i have check that note earlier but it didnt work in my case
    trc file: "F:\usr\sap\BS1\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13330450
    pid         : 4428
    system name : BS1
    system nr.  : 01
    started at  : Mon Jun 02 16:53:04 2008
    arguments       :
           arg[00] : F:\usr\sap\BS1\DVEBMGS01\exe\jlaunch.exe
           arg[01] : pf=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
           arg[02] : -DSAPINFO=BS1_01_server
           arg[03] : pf=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=3207
           arg[06] : -DSAPSYSTEM=01
           arg[07] : -DSAPSYSTEMNAME=BS1
           arg[08] : -DSAPMYNAME=sapserver2_BS1_01
           arg[09] : -DSAPPROFILE=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 4180] Mon Jun 02 16:53:04 2008
    [Thr 4180] *** WARNING => INFO: Unknown property [instance.box.number=BS1DVEBMGS01sapserver2] [jstartxx.c   841]
    [Thr 4180] *** WARNING => INFO: Unknown property [instance.en.host=sapserver2] [jstartxx.c   841]
    [Thr 4180] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]
    [Thr 4180] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : sapserver2
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : sapserver2
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13330400 : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13330450 : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13330400           : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13330450           : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 4180] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 4180] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 1776] WaitSyncSemThread: Thread 1776 started as semaphore monitor thread.
    [Thr 4372] JLaunchRequestFunc: Thread 4372 started as listener thread for np messages.
    [Thr 4180] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 4180] CPIC (version=700.2005.12.02)
    [Thr 4180] [Node: server0] java home is set by profile parameter
         Java Home: F:\j2sdk1.4.2_12
    [Thr 4180] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BS1\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13330450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\j2sdk1.4.2_12
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> java vm version    : 1.4.2_12-b03
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BS1\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BS1\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 4180] JLaunchISetDebugMode: set debug mode [no]
    [Thr 4892] JLaunchIStartFunc: Thread 4892 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djava.security.policy=./java.policy
    -> arg[  4]: -Djava.security.egd=file:/dev/urandom
    -> arg[  5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  8]: -Djco.jarm=1
    -> arg[  9]: -XX:MaxPermSize=256M
    -> arg[ 10]: -XX:PermSize=256M
    -> arg[ 11]: -XX:NewSize=171M
    -> arg[ 12]: -XX:MaxNewSize=171M
    -> arg[ 13]: -XX:+DisableExplicitGC
    -> arg[ 14]: -verbose:gc
    -> arg[ 15]: -Xloggc:GC.log
    -> arg[ 16]: -XX:+PrintGCDetails
    -> arg[ 17]: -XX:+PrintGCTimeStamps
    -> arg[ 18]: -Djava.awt.headless=true
    -> arg[ 19]: -Dsun.io.useCanonCaches=false
    -> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 24]: -Dsys.global.dir=F:\usr\sap\BS1\SYS\global
    -> arg[ 25]: -Dapplication.home=F:\usr\sap\BS1\DVEBMGS01\exe
    -> arg[ 26]: -Djava.class.path=F:\usr\sap\BS1\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BS1\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 27]: -Djava.library.path=F:\j2sdk1.4.2_12\jre\bin\server;F:\j2sdk1.4.2_12\jre\bin;F:\j2sdk1.4.2_12\bin;F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs;F:\Program Files\PC Connectivity Solution\;F:\oracle\product\10.2.0\db_1\bin;F:\WINDOWS\system32;F:\WINDOWS;F:\WINDOWS\System32\Wbem;F:\j2sdk1.4.2_16\bin;F:\oracle\product\10.2.0\db_1\OPatch;F:\usr\sap\BS1\SYS\exe\uc\NTI386
    -> arg[ 28]: -Dmemory.manager=1024M
    -> arg[ 29]: -Xmx1024M
    -> arg[ 30]: -Xms1024M
    -> arg[ 31]: -DLoadBalanceRestricted=no
    -> arg[ 32]: -Djstartup.mode=JCONTROL
    -> arg[ 33]: -Djstartup.ownProcessId=4428
    -> arg[ 34]: -Djstartup.ownHardwareId=E0215248427
    -> arg[ 35]: -Djstartup.whoami=server
    -> arg[ 36]: -Djstartup.debuggable=no
    -> arg[ 37]: -DSAPINFO=BS1_01_server
    -> arg[ 38]: -DSAPSTART=1
    -> arg[ 39]: -DCONNECT_PORT=3207
    -> arg[ 40]: -DSAPSYSTEM=01
    -> arg[ 41]: -DSAPSYSTEMNAME=BS1
    -> arg[ 42]: -DSAPMYNAME=sapserver2_BS1_01
    -> arg[ 43]: -DSAPPROFILE=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
    -> arg[ 44]: -DFRFC_FALLBACK=ON
    -> arg[ 45]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 46]: -DSAPSTARTUP=1
    -> arg[ 47]: -DSAPSYSTEM=01
    -> arg[ 48]: -DSAPSYSTEMNAME=BS1
    -> arg[ 49]: -DSAPMYNAME=sapserver2_BS1_01
    -> arg[ 50]: -DSAPDBHOST=sapserver2
    -> arg[ 51]: -Dj2ee.dbhost=sapserver2
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 4892] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 4332] Mon Jun 02 16:53:08 2008
    [Thr 4332] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 4332] Mon Jun 02 16:53:10 2008
    [Thr 4332] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 4332] JLaunchISetClusterId: set cluster id 13330450
    [Thr 4332] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 4332] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 6016] Mon Jun 02 16:53:54 2008
    [Thr 6016] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 6016] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "F:\usr\sap\BS1\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13330450
    pid         : 2956
    system name : BS1
    system nr.  : 01
    started at  : Mon Jun 02 16:53:55 2008
    arguments       :
           arg[00] : F:\usr\sap\BS1\DVEBMGS01\exe\jlaunch.exe
           arg[01] : pf=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
           arg[02] : -DSAPINFO=BS1_01_server
           arg[03] : pf=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=3207
           arg[06] : -DSAPSYSTEM=01
           arg[07] : -DSAPSYSTEMNAME=BS1
           arg[08] : -DSAPMYNAME=sapserver2_BS1_01
           arg[09] : -DSAPPROFILE=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 3392] Mon Jun 02 16:53:55 2008
    [Thr 3392] *** WARNING => INFO: Unknown property [instance.box.number=BS1DVEBMGS01sapserver2] [jstartxx.c   841]
    [Thr 3392] *** WARNING => INFO: Unknown property [instance.en.host=sapserver2] [jstartxx.c   841]
    [Thr 3392] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]
    [Thr 3392] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : sapserver2
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : sapserver2
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13330400 : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13330450 : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13330400           : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13330450           : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 3392] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 3392] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 3352] JLaunchRequestFunc: Thread 3352 started as listener thread for np messages.
    [Thr 2872] WaitSyncSemThread: Thread 2872 started as semaphore monitor thread.
    [Thr 3392] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 3392] CPIC (version=700.2005.12.02)
    [Thr 3392] [Node: server0] java home is set by profile parameter
         Java Home: F:\j2sdk1.4.2_12
    [Thr 3392] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BS1\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13330450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\j2sdk1.4.2_12
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> java vm version    : 1.4.2_12-b03
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BS1\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BS1\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 3392] JLaunchISetDebugMode: set debug mode [no]
    [Thr 2808] JLaunchIStartFunc: Thread 2808 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djava.security.policy=./java.policy
    -> arg[  4]: -Djava.security.egd=file:/dev/urandom
    -> arg[  5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  8]: -Djco.jarm=1
    -> arg[  9]: -XX:MaxPermSize=256M
    -> arg[ 10]: -XX:PermSize=256M
    -> arg[ 11]: -XX:NewSize=171M
    -> arg[ 12]: -XX:MaxNewSize=171M
    -> arg[ 13]: -XX:+DisableExplicitGC
    -> arg[ 14]: -verbose:gc
    -> arg[ 15]: -Xloggc:GC.log
    -> arg[ 16]: -XX:+PrintGCDetails
    -> arg[ 17]: -XX:+PrintGCTimeStamps
    -> arg[ 18]: -Djava.awt.headless=true
    -> arg[ 19]: -Dsun.io.useCanonCaches=false
    -> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 24]: -Dsys.global.dir=F:\usr\sap\BS1\SYS\global
    -> arg[ 25]: -Dapplication.home=F:\usr\sap\BS1\DVEBMGS01\exe
    -> arg[ 26]: -Djava.class.path=F:\usr\sap\BS1\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BS1\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 27]: -Djava.library.path=F:\j2sdk1.4.2_12\jre\bin\server;F:\j2sdk1.4.2_12\jre\bin;F:\j2sdk1.4.2_12\bin;F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs;F:\Program Files\PC Connectivity Solution\;F:\oracle\product\10.2.0\db_1\bin;F:\WINDOWS\system32;F:\WINDOWS;F:\WINDOWS\System32\Wbem;F:\j2sdk1.4.2_16\bin;F:\oracle\product\10.2.0\db_1\OPatch;F:\usr\sap\BS1\SYS\exe\uc\NTI386
    -> arg[ 28]: -Dmemory.manager=1024M
    -> arg[ 29]: -Xmx1024M
    -> arg[ 30]: -Xms1024M
    -> arg[ 31]: -DLoadBalanceRestricted=no
    -> arg[ 32]: -Djstartup.mode=JCONTROL
    -> arg[ 33]: -Djstartup.ownProcessId=2956
    -> arg[ 34]: -Djstartup.ownHardwareId=E0215248427
    -> arg[ 35]: -Djstartup.whoami=server
    -> arg[ 36]: -Djstartup.debuggable=no
    -> arg[ 37]: -DSAPINFO=BS1_01_server
    -> arg[ 38]: -DSAPSTART=1
    -> arg[ 39]: -DCONNECT_PORT=3207
    -> arg[ 40]: -DSAPSYSTEM=01
    -> arg[ 41]: -DSAPSYSTEMNAME=BS1
    -> arg[ 42]: -DSAPMYNAME=sapserver2_BS1_01
    -> arg[ 43]: -DSAPPROFILE=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
    -> arg[ 44]: -DFRFC_FALLBACK=ON
    -> arg[ 45]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 46]: -DSAPSTARTUP=1
    -> arg[ 47]: -DSAPSYSTEM=01
    -> arg[ 48]: -DSAPSYSTEMNAME=BS1
    -> arg[ 49]: -DSAPMYNAME=sapserver2_BS1_01
    -> arg[ 50]: -DSAPDBHOST=sapserver2
    -> arg[ 51]: -Dj2ee.dbhost=sapserver2
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 2808] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 3660] Mon Jun 02 16:53:57 2008
    [Thr 3660] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 3660] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 3660] JLaunchISetClusterId: set cluster id 13330450
    [Thr 3660] Mon Jun 02 16:53:58 2008
    [Thr 3660] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 3660] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 3384] Mon Jun 02 16:54:29 2008
    [Thr 3384] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 3384] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "F:\usr\sap\BS1\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13330450
    pid         : 3124
    system name : BS1
    system nr.  : 01
    started at  : Mon Jun 02 16:54:31 2008
    arguments       :
           arg[00] : F:\usr\sap\BS1\DVEBMGS01\exe\jlaunch.exe
           arg[01] : pf=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
           arg[02] : -DSAPINFO=BS1_01_server
           arg[03] : pf=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=3207
           arg[06] : -DSAPSYSTEM=01
           arg[07] : -DSAPSYSTEMNAME=BS1
           arg[08] : -DSAPMYNAME=sapserver2_BS1_01
           arg[09] : -DSAPPROFILE=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 2724] Mon Jun 02 16:54:31 2008
    [Thr 2724] *** WARNING => INFO: Unknown property [instance.box.number=BS1DVEBMGS01sapserver2] [jstartxx.c   841]
    [Thr 2724] *** WARNING => INFO: Unknown property [instance.en.host=sapserver2] [jstartxx.c   841]
    [Thr 2724] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]
    [Thr 2724] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : sapserver2
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : sapserver2
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13330400 : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13330450 : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13330400           : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13330450           : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 2724] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 2724] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 2976] JLaunchRequestFunc: Thread 2976 started as listener thread for np messages.
    [Thr 328] WaitSyncSemThread: Thread 328 started as semaphore monitor thread.
    [Thr 2724] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 2724] CPIC (version=700.2005.12.02)
    [Thr 2724] [Node: server0] java home is set by profile parameter
         Java Home: F:\j2sdk1.4.2_12
    [Thr 2724] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BS1\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13330450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\j2sdk1.4.2_12
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> java vm version    : 1.4.2_12-b03
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BS1\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BS1\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 2724] JLaunchISetDebugMode: set debug mode [no]
    [Thr 3192] JLaunchIStartFunc: Thread 3192 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djava.security.policy=./java.policy
    -> arg[  4]: -Djava.security.egd=file:/dev/urandom
    -> arg[  5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  8]: -Djco.jarm=1
    -> arg[  9]: -XX:MaxPermSize=256M
    -> arg[ 10]: -XX:PermSize=256M
    -> arg[ 11]: -XX:NewSize=171M
    -> arg[ 12]: -XX:MaxNewSize=171M
    -> arg[ 13]: -XX:+DisableExplicitGC
    -> arg[ 14]: -verbose:gc
    -> arg[ 15]: -Xloggc:GC.log
    -> arg[ 16]: -XX:+PrintGCDetails
    -> arg[ 17]: -XX:+PrintGCTimeStamps
    -> arg[ 18]: -Djava.awt.headless=true
    -> arg[ 19]: -Dsun.io.useCanonCaches=false
    -> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 24]: -Dsys.global.dir=F:\usr\sap\BS1\SYS\global
    -> arg[ 25]: -Dapplication.home=F:\usr\sap\BS1\DVEBMGS01\exe
    -> arg[ 26]: -Djava.class.path=F:\usr\sap\BS1\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BS1\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 27]: -Djava.library.path=F:\j2sdk1.4.2_12\jre\bin\server;F:\j2sdk1.4.2_12\jre\bin;F:\j2sdk1.4.2_12\bin;F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs;F:\Program Files\PC Connectivity Solution\;F:\oracle\product\10.2.0\db_1\bin;F:\WINDOWS\system32;F:\WINDOWS;F:\WINDOWS\System32\Wbem;F:\j2sdk1.4.2_16\bin;F:\oracle\product\10.2.0\db_1\OPatch;F:\usr\sap\BS1\SYS\exe\uc\NTI386
    -> arg[ 28]: -Dmemory.manager=1024M
    -> arg[ 29]: -Xmx1024M
    -> arg[ 30]: -Xms1024M
    -> arg[ 31]: -DLoadBalanceRestricted=no
    -> arg[ 32]: -Djstartup.mode=JCONTROL
    -> arg[ 33]: -Djstartup.ownProcessId=3124
    -> arg[ 34]: -Djstartup.ownHardwareId=E0215248427
    -> arg[ 35]: -Djstartup.whoami=server
    -> arg[ 36]: -Djstartup.debuggable=no
    -> arg[ 37]: -DSAPINFO=BS1_01_server
    -> arg[ 38]: -DSAPSTART=1
    -> arg[ 39]: -DCONNECT_PORT=3207
    -> arg[ 40]: -DSAPSYSTEM=01
    -> arg[ 41]: -DSAPSYSTEMNAME=BS1
    -> arg[ 42]: -DSAPMYNAME=sapserver2_BS1_01
    -> arg[ 43]: -DSAPPROFILE=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
    -> arg[ 44]: -DFRFC_FALLBACK=ON
    -> arg[ 45]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 46]: -DSAPSTARTUP=1
    -> arg[ 47]: -DSAPSYSTEM=01
    -> arg[ 48]: -DSAPSYSTEMNAME=BS1
    -> arg[ 49]: -DSAPMYNAME=sapserver2_BS1_01
    -> arg[ 50]: -DSAPDBHOST=sapserver2
    -> arg[ 51]: -Dj2ee.dbhost=sapserver2
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 3192] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 2548] Mon Jun 02 16:54:32 2008
    [Thr 2548] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 2548] Mon Jun 02 16:54:33 2008
    [Thr 2548] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2548] JLaunchISetClusterId: set cluster id 13330450
    [Thr 2548] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2548] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 3224] Mon Jun 02 16:55:05 2008
    [Thr 3224] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 3224] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "F:\usr\sap\BS1\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13330450
    pid         : 4980
    system name : BS1
    system nr.  : 01
    started at  : Mon Jun 02 16:55:06 2008
    arguments       :
           arg[00] : F:\usr\sap\BS1\DVEBMGS01\exe\jlaunch.exe
           arg[01] : pf=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
           arg[02] : -DSAPINFO=BS1_01_server
           arg[03] : pf=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=3207
           arg[06] : -DSAPSYSTEM=01
           arg[07] : -DSAPSYSTEMNAME=BS1
           arg[08] : -DSAPMYNAME=sapserver2_BS1_01
           arg[09] : -DSAPPROFILE=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 5704] Mon Jun 02 16:55:06 2008
    [Thr 5704] *** WARNING => INFO: Unknown property [instance.box.number=BS1DVEBMGS01sapserver2] [jstartxx.c   841]
    [Thr 5704] *** WARNING => INFO: Unknown property [instance.en.host=sapserver2] [jstartxx.c   841]
    [Thr 5704] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]
    [Thr 5704] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : sapserver2
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : sapserver2
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13330400 : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13330450 : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13330400           : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13330450           : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 5704] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 5704] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 4384] JLaunchRequestFunc: Thread 4384 started as listener thread for np messages.
    [Thr 5272] WaitSyncSemThread: Thread 5272 started as semaphore monitor thread.
    [Thr 5704] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 5704] CPIC (version=700.2005.12.02)
    [Thr 5704] [Node: server0] java home is set by profile parameter
         Java Home: F:\j2sdk1.4.2_12
    [Thr 5704] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BS1\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13330450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\j2sdk1.4.2_12
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> java vm version    : 1.4.2_12-b03
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BS1\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BS1\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BS1\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 5704] JLaunchISetDebugMode: set debug mode [no]
    [Thr 4764] JLaunchIStartFunc: Thread 4764 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djava.security.policy=./java.policy
    -> arg[  4]: -Djava.security.egd=file:/dev/urandom
    -> arg[  5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  8]: -Djco.jarm=1
    -> arg[  9]: -XX:MaxPermSize=256M
    -> arg[ 10]: -XX:PermSize=256M
    -> arg[ 11]: -XX:NewSize=171M
    -> arg[ 12]: -XX:MaxNewSize=171M
    -> arg[ 13]: -XX:+DisableExplicitGC
    -> arg[ 14]: -verbose:gc
    -> arg[ 15]: -Xloggc:GC.log
    -> arg[ 16]: -XX:+PrintGCDetails
    -> arg[ 17]: -XX:+PrintGCTimeStamps
    -> arg[ 18]: -Djava.awt.headless=true
    -> arg[ 19]: -Dsun.io.useCanonCaches=false
    -> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 24]: -Dsys.global.dir=F:\usr\sap\BS1\SYS\global
    -> arg[ 25]: -Dapplication.home=F:\usr\sap\BS1\DVEBMGS01\exe
    -> arg[ 26]: -Djava.class.path=F:\usr\sap\BS1\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BS1\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 27]: -Djava.library.path=F:\j2sdk1.4.2_12\jre\bin\server;F:\j2sdk1.4.2_12\jre\bin;F:\j2sdk1.4.2_12\bin;F:\usr\sap\BS1\DVEBMGS01\j2ee\os_libs;F:\Program Files\PC Connectivity Solution\;F:\oracle\product\10.2.0\db_1\bin;F:\WINDOWS\system32;F:\WINDOWS;F:\WINDOWS\System32\Wbem;F:\j2sdk1.4.2_16\bin;F:\oracle\product\10.2.0\db_1\OPatch;F:\usr\sap\BS1\SYS\exe\uc\NTI386
    -> arg[ 28]: -Dmemory.manager=1024M
    -> arg[ 29]: -Xmx1024M
    -> arg[ 30]: -Xms1024M
    -> arg[ 31]: -DLoadBalanceRestricted=no
    -> arg[ 32]: -Djstartup.mode=JCONTROL
    -> arg[ 33]: -Djstartup.ownProcessId=4980
    -> arg[ 34]: -Djstartup.ownHardwareId=E0215248427
    -> arg[ 35]: -Djstartup.whoami=server
    -> arg[ 36]: -Djstartup.debuggable=no
    -> arg[ 37]: -DSAPINFO=BS1_01_server
    -> arg[ 38]: -DSAPSTART=1
    -> arg[ 39]: -DCONNECT_PORT=3207
    -> arg[ 40]: -DSAPSYSTEM=01
    -> arg[ 41]: -DSAPSYSTEMNAME=BS1
    -> arg[ 42]: -DSAPMYNAME=sapserver2_BS1_01
    -> arg[ 43]: -DSAPPROFILE=F:\usr\sap\BS1\SYS\profile\BS1_DVEBMGS01_sapserver2
    -> arg[ 44]: -DFRFC_FALLBACK=ON
    -> arg[ 45]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 46]: -DSAPSTARTUP=1
    -> arg[ 47]: -DSAPSYSTEM=01
    -> arg[ 48]: -DSAPSYSTEMNAME=BS1
    -> arg[ 49]: -DSAPMYNAME=sapserver2_BS1_01
    -> arg[ 50]: -DSAPDBHOST=sapserver2
    -> arg[ 51]: -Dj2ee.dbhost=sapserver2
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 4764] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 2096] Mon Jun 02 16:55:08 2008
    [Thr 2096] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 2096] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2096] JLaunchISetClusterId: set cluster id 13330450
    [Thr 2096] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2096] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 4752] Mon Jun 02 16:55:40 2008
    [Thr 4752] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 4752] JLaunchCloseProgram: good bye (exitcode = -11113)

  • What happened? After this morning Firefox's update, I couldn't get into Firefox but got this message, "The application failed to start because it's side-by-side configuration is incorrect.

    This morning I went to go into Firefox, a message came up stating it was updating. After the update, Firefox didn't open, so I clicked on the icon and got this message. C:\Program Files (x86) Mozilla Fire\firefox.exe. The application has failed to start because its side-by-side configuration is incorrect. I tried removing & re-installing and I even try the Window's restoration point of a couple days back and I still get the message. Has anyone had or have this problem?

    You can click the link in my above post if you haven't done that yet.
    *https://support.mozilla.org/questions/910134
    That SxS error seems to be caused by a corrupted Visual C installation that requires some DLL files to be reinstalled.
    *http://www.vistax64.com/software/245768-side-side-configuration-incorrect.html

  • HT201593 When I tried to sync my iPod with iTunes after changing it so I could manually manage my photos a box popped up saying 'it failed to sync cause it couldn't start'. What is this? How can I get it to just sync with my changes?

    My iPod says it has failed to sync because it failed to even start syncing, what is this?! It hasn't had problems like this before when syncing. What can I do to get it back to normal?

    Try:
    Sync session failed to start
    Sync Session Failed to Start iTouch iOS5
    iphone could not be synced because the sync session failed to start

  • I was updating Firefox from version 6 to version 7, after updating I tried to open Firefox and the message I got is this: This application has failed to start because xul.dll was not found. How can I fix this?

    I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • GNOME Fails to start - Polkit? Main.js? - Receive 'Oops' message.

    Been using Arch for years but this is my first problem surprisingly so posting it in this Newbies section.
    I have MATE, KDE, and FLUXBOX working fine as desktop environments for years. Thought I would give GNOME a try and no matter what I've tried I cannot get it working. All I get is a sad face with an 'OOPS' message on screen. Although I am prompted to enter my WiFi password presumably from NetworkManager. None of the errors listed below turn up much on Google so I thought I'd turn to the community. Any help getting GNOME working correctly would be very much appreciated.
    -- Logs begin at Mon 2014-06-09 18:04:18 BST. --
    Jan 19 14:26:50 glow lightdm[1574]: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
    Jan 19 14:26:50 glow systemd-logind[432]: New session c4 of user lightdm.
    Jan 19 14:26:50 glow org.a11y.Bus[1582]: Activating service name='org.a11y.atspi.Registry'
    Jan 19 14:26:50 glow org.a11y.Bus[1582]: Successfully activated service 'org.a11y.atspi.Registry'
    Jan 19 14:26:50 glow org.a11y.atspi.Registry[1588]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
    Jan 19 14:26:50 glow systemd-logind[432]: Removed session c1.
    Jan 19 14:26:51 glow NetworkManager[422]: <warn> Could not get scan request result: Scan request rejected
    Jan 19 14:26:59 glow login[1524]: pam_unix(login:session): session opened for user cellardoor by LOGIN(uid=0)
    Jan 19 14:26:59 glow systemd-logind[432]: New session c5 of user cellardoor.
    Jan 19 14:26:59 glow login[1524]: LOGIN ON tty3 BY cellardoor
    Jan 19 14:27:16 glow org.a11y.Bus[1718]: Activating service name='org.a11y.atspi.Registry'
    Jan 19 14:27:16 glow org.a11y.Bus[1718]: Successfully activated service 'org.a11y.atspi.Registry'
    Jan 19 14:27:16 glow org.a11y.atspi.Registry[1725]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
    Jan 19 14:27:16 glow gnome-keyring-daemon[1735]: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory
    Jan 19 14:27:16 glow gnome-session[1714]: ** Message: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory
    Jan 19 14:27:16 glow gnome-session[1714]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
    Jan 19 14:27:16 glow gnome-session[1714]: GPG_AGENT_INFO=/run/user/1000/keyring/gpg:0:1
    Jan 19 14:27:16 glow gnome-session[1714]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
    Jan 19 14:27:16 glow rtkit-daemon[833]: Successfully made thread 1753 of process 1753 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Jan 19 14:27:16 glow rtkit-daemon[833]: Supervising 2 threads of 2 processes of 1 users.
    Jan 19 14:27:16 glow pulseaudio[1753]: Daemon already running.
    Jan 19 14:27:16 glow dbus[425]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
    Jan 19 14:27:16 glow dbus[425]: [system] Successfully activated service 'org.freedesktop.hostname1'
    Jan 19 14:27:16 glow dbus[425]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service'
    Jan 19 14:27:16 glow dbus[425]: [system] Successfully activated service 'org.freedesktop.locale1'
    Jan 19 14:27:16 glow gnome-session[1714]: (gnome-shell:1773): Gjs-WARNING **: JS ERROR: Error: Requiring Polkit, version none: Typelib file for namespace 'Polkit' (any version) not found
    Jan 19 14:27:16 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/endSessionDialog.js:28
    Jan 19 14:27:16 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/main.js:15
    Jan 19 14:27:16 glow gnome-session[1714]: @<main>:1
    Jan 19 14:27:16 glow gnome-session[1714]: ** Message: Execution of main.js threw exception: JS_EvaluateScript() failed
    Jan 19 14:27:16 glow gnome-session[1714]: gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
    Jan 19 14:27:16 glow gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
    Jan 19 14:27:17 glow gnome-session[1714]: (gnome-shell:1790): Gjs-WARNING **: JS ERROR: Error: Requiring Polkit, version none: Typelib file for namespace 'Polkit' (any version) not found
    Jan 19 14:27:17 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/endSessionDialog.js:28
    Jan 19 14:27:17 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/main.js:15
    Jan 19 14:27:17 glow gnome-session[1714]: @<main>:1
    Jan 19 14:27:17 glow gnome-session[1714]: ** Message: Execution of main.js threw exception: JS_EvaluateScript() failed
    Jan 19 14:27:17 glow gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
    Jan 19 14:27:17 glow gnome-session[1714]: WARNING: App 'gnome-shell.desktop' respawning too quickly
    Jan 19 14:27:17 glow gnome-session[1714]: gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
    Jan 19 14:27:17 glow gnome-session[1714]: gnome-session[1714]: WARNING: App 'gnome-shell.desktop' respawning too quickly
    Jan 19 14:27:17 glow gnome-session[1714]: Unrecoverable failure in required component gnome-shell.desktop
    Jan 19 14:27:17 glow fingerprint-polkit-agent[1806]: Got "debug" argument.
    Jan 19 14:27:17 glow fingerprint-polkit-agent[1806]: started.
    Jan 19 14:27:17 glow gnome-session[1714]: (uint32 1,)
    Jan 19 14:27:17 glow gnome-session[1714]: Entering running state
    Jan 19 14:27:17 glow gnome-session[1714]: Failed to play sound: File or data not found
    Jan 19 14:27:17 glow gnome-session[1714]: New PolkitAgentListener 0xb637a0
    Jan 19 14:27:17 glow gnome-session[1714]: Adding new listener PolkitQt1::Agent::Listener(0x7fff29d587e0) for 0xb637a0
    Jan 19 14:27:17 glow org.gnome.zeitgeist.Engine[1718]: ** (zeitgeist-datahub:1857): WARNING **: zeitgeist-datahub.vala:226: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
    Jan 19 14:27:17 glow polkitd[433]: Registered Authentication Agent for unix-session:c5 (system bus name :1.90 [/usr/lib/fingerprint-gui/fingerprint-polkit-agent -d], object path /fingerprintgui/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
    Jan 19 14:27:17 glow fingerprint-polkit-agent[1806]: Listener "/fingerprintgui/PolicyKit1/AuthenticationAgent" registered.
    Jan 19 14:27:17 glow NetworkManager[422]: <info> Auto-activating connection 'The Promised LAN'.
    Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) starting connection 'The Promised LAN'
    Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) scheduled...
    Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) started...
    Jan 19 14:27:17 glow NetworkManager[422]: <info> (wlp3s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) scheduled...
    Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) complete.
    Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) starting...
    Jan 19 14:27:17 glow NetworkManager[422]: <info> (wlp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
    Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0/wireless): access point 'The Promised LAN' has security, but secrets are required.
    Jan 19 14:27:17 glow NetworkManager[422]: <info> (wlp3s0): device state change: config -> need-auth (reason 'none') [50 60 0]
    Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) complete.
    Jan 19 14:27:17 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.1: cannot open shared object file: No such file or directory
    Jan 19 14:27:17 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory
    Jan 19 14:27:17 glow gnome-session[1714]: Traceback (most recent call last):
    Jan 19 14:27:17 glow gnome-session[1714]: File "<frozen importlib._bootstrap>", line 2158, in _find_spec
    Jan 19 14:27:17 glow gnome-session[1714]: AttributeError: 'DynamicImporter' object has no attribute 'find_spec'
    Jan 19 14:27:17 glow gnome-session[1714]: During handling of the above exception, another exception occurred:
    Jan 19 14:27:17 glow gnome-session[1714]: Traceback (most recent call last):
    Jan 19 14:27:17 glow gnome-session[1714]: File "/usr/share/system-config-printer/applet.py", line 45, in <module>
    Jan 19 14:27:17 glow gnome-session[1714]: from gi.repository import Notify
    Jan 19 14:27:17 glow gnome-session[1714]: File "/usr/lib/python3.4/site-packages/gi/importer.py", line 53, in find_module
    Jan 19 14:27:17 glow gnome-session[1714]: 'introspection typelib not found' % namespace)
    Jan 19 14:27:17 glow gnome-session[1714]: ImportError: cannot import name Notify, introspection typelib not found
    Jan 19 14:27:17 glow gnome-session[1714]: (nm-applet:1810): libnm-glib-CRITICAL **: nm_secret_agent_register: assertion 'priv->registered == FALSE' failed
    Jan 19 14:27:17 glow gnome-session[1714]: nm-applet-Message: No keyring secrets found for The Promised LAN/802-11-wireless-security; asking user.
    Jan 19 14:27:17 glow gnome-session[1714]: (gnome-settings-daemon:1742): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion 'G_IS_DBUS_PROXY (proxy)' failed
    Jan 19 14:27:17 glow gnome-session[1714]: (gnome-settings-daemon:1742): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion 'G_IS_DBUS_PROXY (proxy)' failed
    Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Call to gst_discoverer_discover_uri() failed: GStreamer encountered a general stream error.
    Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/test.webm' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/test.webm' and mime:'video/webm'
    Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Failed to open file: No OLE2 signature
    Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/samsungkeyforserver.pub' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/samsungkeyforserver.pub' and mime:'application/vnd.ms-publisher'
    Jan 19 14:27:18 glow org.gnome.OnlineAccounts[1718]: goa-daemon-Message: goa-daemon version 3.14.2 starting
    Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.1: cannot open shared object file: No such file or directory
    Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory
    Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Couldn't create PopplerDocument from uri:'file:///home/cellardoor/Documents/Holiday/certificate_flight_plus_2_a.pdf', PDF document is damaged
    Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/Documents/Holiday/certificate_flight_plus_2_a.pdf' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/Documents/Holiday/certificate_flight_plus_2_a.pdf' and mime:'application/pdf'
    Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Call to gst_discoverer_discover_uri() failed: Your GStreamer installation is missing a plug-in.
    Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/Documents/Java/Assignment3/evidence%20of%20testing%20and%20results%20not%20as%20expected.xcf' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/Documents/Java/Assignment3/evidence%20of%20testing%20and%20results%20not%20as%20expected.xcf' and mime:'image/x-xcf'
    Jan 19 14:27:18 glow gnome-session[1714]: Destroying listener
    Jan 19 14:27:18 glow gnome-session[1714]: Removing listener PolkitQt1::Agent::Listener(0x7fff29d587e0)
    Jan 19 14:27:18 glow polkitd[433]: Unregistered Authentication Agent for unix-session:c5 (system bus name :1.90, object path /fingerprintgui/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
    Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
    Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
    Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
    Jan 19 14:27:18 glow NetworkManager[422]: <warn> No agents were available for this request.
    Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
    Jan 19 14:27:18 glow NetworkManager[422]: <warn> Activation (wlp3s0) failed for connection 'The Promised LAN'
    Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
    Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): deactivating device (reason 'none') [0]
    Jan 19 14:27:18 glow NetworkManager[422]: <info> Auto-activating connection 'Security'.
    Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) starting connection 'Security'
    Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) scheduled...
    Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) started...
    Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) scheduled...
    Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
    Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) complete.
    Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) starting...
    Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
    Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0/wireless): access point 'Security' has security, but secrets are required.
    Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: config -> need-auth (reason 'none') [50 60 0]
    Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) complete.
    Jan 19 14:27:18 glow NetworkManager[422]: <warn> No agents were available for this request.
    Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
    Jan 19 14:27:18 glow NetworkManager[422]: <warn> Activation (wlp3s0) failed for connection 'Security'
    Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
    Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): deactivating device (reason 'none') [0]
    Jan 19 14:27:18 glow kernel: tracker-miner-f[1827]: segfault at 130000017a ip 00007f14f57cbdbe sp 00007ffff6a89330 error 4 in libgio-2.0.so.0.4200.1[7f14f5779000+16f000]
    Jan 19 14:27:18 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.UDisks2VolumeMonitor disconnected from the bus; removing drives/volumes/mounts
    Jan 19 14:27:18 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.MTPVolumeMonitor disconnected from the bus; removing drives/volumes/mounts
    Jan 19 14:27:18 glow NetworkManager[422]: <warn> Could not get scan request result: Scan request rejected
    Jan 19 14:27:18 glow org.a11y.Bus[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow gnome-session[1714]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow gnome-session[1714]: Received signal:15->'Terminated'
    Jan 19 14:27:18 glow org.gtk.vfs.Daemon[1718]: A connection to the bus can't be made
    Jan 19 14:27:18 glow org.gtk.vfs.Daemon[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow org.freedesktop.Tracker1[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow org.gtk.vfs.Daemon[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow org.gnome.OnlineAccounts[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow org.gtk.Private.UDisks2VolumeMonitor[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow org.gtk.Private.MTPVolumeMonitor[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow org.gnome.evolution.dataserver.Sources3[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow org.gnome.zeitgeist.Engine[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow org.freedesktop.Tracker1[1718]: Received signal:15->'Terminated'
    Jan 19 14:27:18 glow org.freedesktop.Tracker1[1718]: OK
    Jan 19 14:27:18 glow ca.desrt.dconf[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow gnome-session[1714]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow org.gnome.zeitgeist.Engine[1718]: [14:27:18.337568 WARNING] zeitgeist-daemon.vala:449: The connection is closed
    Jan 19 14:27:18 glow gnome-session[1714]: Received signal:15->'Terminated'
    Jan 19 14:27:18 glow gnome-session[1714]: OK
    Jan 19 14:27:18 glow org.freedesktop.Telepathy.AccountManager[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow org.gnome.evolution.dataserver.Calendar4[1718]: Could not connect: Connection refused
    Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: Error creating proxy: The connection is closed (g-io-error-quark, 18)
    Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
    Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: Error creating proxy: Error calling StartServiceByName for org.gtk.Private.MTPVolumeMonitor: The connection is closed (g-io-error-quark, 18)
    Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
    Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
    Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: Error creating proxy: Error calling StartServiceByName for org.gtk.vfs.Daemon: The connection is closed (g-io-error-quark, 18)
    Jan 19 14:27:18 glow gnome-session[1714]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 19 14:27:18 glow gnome-session[1714]: Received signal:15->'Terminated'
    Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): tumblerd-WARNING **: Failed to start the thumbnail cache service: Another thumbnail cache service is already running
    Jan 19 14:27:18 glow gnome-session[1714]: OK
    Jan 19 14:27:18 glow systemd-coredump[1943]: Process 1827 (tracker-miner-f) of user 1000 dumped core.
    Thank you!
    Moderator edit:  Added code tags
    Last edited by ewaller (2015-01-19 15:57:10)

    Please use code tags when posting logs. From
    Jan 19 14:27:16 glow gnome-session[1714]: ** Message: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory
    Jan 19 14:27:16 glow gnome-session[1714]: (gnome-shell:1773): Gjs-WARNING **: JS ERROR: Error: Requiring Polkit, version none: Typelib file for namespace 'Polkit' (any version) not found
    it seems you're missing dependencies, or they're not started for some reason. Try running GNOME via GDM, installing latter should pull in the full kitchen sink. If you want more hints, google for "gjs polkit not found".
    Last edited by Alad (2015-01-19 15:38:09)

  • Today, I got a "update iTunes and tonight, I can't access my iTunes. I uninstalled and reinstalled and the error message reads: iTunesexe-unable to locate component. App has failed to start due to MSVCR80.dll was not found: Reinstall may fix" but hasn't.

    I received an iTunes update today and updates files. Tonight, I couldn't acces my iTunes. I uninstalled and reinstalled and still getting same error message: iTunes exe unable to locate component. This application has failed to start because MSVCR80.DLL was not found. Reinstalling the application may fix this problem.  I've done it several times and still get the error.  I'm fearful I have lost all my music.  What can I do?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Hi was told that there was an update for itunes yesterday, when to update and this kept failing, was prompted to uninstall itunes and reinstall this continues to fail message coming up says Apple Mobile device failed to start insufficient  previlieges

    Hi yesterday I was prompted to a update to itunes this I tried to do without success failing a number of times. After this I was prompted to unistall itunes and re install this now continues to fail with a message error something like Apple Mobile Devices Failed to start not enough previlieges. Please help is this a Apple issue Iv'e never had any problems before.

    I had this same problem this morning. When I tried to run ITunes after the failed upgrade I got a "msvcr80.dll is missing" driver error.
    Following the instructions in step 1 of this link:
    http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm
    got the latest version of ITunes up and running for me.
    The only thing that didn't quite work like the instructions said was I couldn't get the Apple Mobile Device Support to uninstall. The uninstall ran and said it was successful, but it was never removed from my list of installed programs. Even w/ that, the full re-install fixed the issue.

  • Out of the box approval workflow suddenly failed on start (retrying)

    SharePoint 2010. I've been using out of the box approval workflow for several month now. I did some minor changes to it, like to who and when emails should be send, but that's all.
    Then out of a sudden it stopped working. New request status is "Failed on start (retrying)". Sometimes (!) status is "In Progress", but no tasks are created. In both cases there is nothing on workflow history and error report is also empty
    (it even cause an error "Report contains no data").
    I'm sure that I didn't change anything in a workflow. The only think that I changed was an InfoPath form, but I only added there field "Created By", so I would see in calendar later who created this request. I couldn't see how this might affect workflow
    process.
    I'm confused as I don't even know where to start searching for the solution. Why this might happen? Any ideas are very welcome!

     In my list I have a multiple choice field which is not required. When it was
    blank my workflow was failing on start! This field was not involved in a workflow directly, I included it only in the email to approver. When I deleted it from an email everything was fine.

  • F11 Recovery don`t work - error Windows failed to start

    After downloading MS updates don`t work administrator password. I try F11 Recovery and see black screen: windows failed to start. A recent hardware or software change might be the cause ...
    File: \windows\system32\winload.efi
    status: 0x0000001
    Info: The application or operating system couldn't be loaded because a required is missing or contains errors.
    ?Any ideas?
    This question was solved.
    View Solution.

    1) Maybe I misunderstood something, but I thought that the function f11 restores preinstalled Windows from the hidden partition on the disk.
    2) I created a boot disk with Windows 8 Pro on USB and tried to boot from it through Boot manager. Beyond the first installation screen did not go.
    3) As for your advice to contact the dealer, so I did yesterday. The tablet was taken away for examination by 20 days...
    It's very sad, it was a gift to my father for Christmas.
    I work for a long time as the system administrator and am dealing with HP servers. It is a pity that such a reputable company can not provide the quality of their tablets. 
    I advised my daughter Windows tablet, but she wished to have iPad. Now I see that she was right - a year she has no problems with it. Windows tablet - this is not the best choice for a child or an old man.

  • Lenovo T410s recovery windows 7 failed to start after the system instalatio​n.

    I've got a problem with the laptop Lenovo T410s. I've put the new HDD on it (tried even the same with a different HDD too), and started to instal WIN 7 64-bit from the recovery disks. I used to do it many times so far with different Lenovo laptops without any problems. But this time, a while before the end of the instalation (when processing the sdrivebackup.wim) it stops and comes with a statement: " the recovery process has been finished, please ...." (but I see that the progres bar is far awayfrom 100%) , and finishes the instalation, reboot the computer and it comes the screen with the statement from the Windows Boot Manager:
    "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem (...)
    File: \Windows\system32\winload.exe
    Status: 0xc000000f
    Info: The selected entrycould not be loaded because the application is missing or corrupt"
    I read a lot about the ways to solve similar problems, but they don't work on my case. The strange thing is, that I can instal WIN 8 or WIN7 from regular Windows instalation disks  (not from Lenovo recovery, but from normal universal Windows instalation disks).
    As I told before, I tried it in 2 different HDD disks with the same effect. It looks that the recovery instalation stops before the end without instaling some files which are missing later during starting the system.
    Anybody can help me with that problem?
    Solved!
    Go to Solution.

    It doesn't quite sound like it based on your reported error messages, but are you trying to do recovery to an advanced format HDD?  (one with 4k-byte sectors)
    I ran into that issue on a T400.  The recovery media would run to completion then error out - with a somewhat different message IIRC.
    There weren't appropriate drivers for an AF drive, and I couldn't find a solution.  There's no way (that I know of) to inject drivers into recovery media the way one can with install media.
    If this is an AF drive issue the only way to get around it may be to install to a non-AF drive (usually a small-ish one) and then clone to your new drive.
    I may be totally off in left field here - just tossing it out as a possibility.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Dialog Instance Installation failed at start instance phase

    Hi Experts,
    I am using SWPM to do the installation for the DI (ECC6.0 EHP4) but failed on start instance phase.
    I got below error when i run R3trans -d.
    Kernel 7.21
    oracle client 11.2.03
    When i manually run the command R3trans -d then return error as below.
    This is R3trans version 6.24 (release 721 - 26.09.13 - 20:13:07 ).
    unicode enabled version
    2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/IEP/SYS/exe/run') or dbms_type ('ORA')"
    Trans.log as below.
    4 ETW000 R3trans version 6.24 (release 721 - 26.09.13 - 20:13:07 ).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time : 27.06.2014 - 18:06:40
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000 trace at level 2 opened for a given file pointer
    4 ETW000 [ dev trc,00000] Fri Jun 27 18:06:40 2014 20660 0.020660
    4 ETW000 [ dev trc,00000] db_con_init called 22 0.020682
    4 ETW000 [ dev trc,00000] set_use_ext_con_info(): usage of ssfs switched off (rsdb/ssfs_connect=0)
    4 ETW000 1727 0.022409
    4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000 37 0.022446
    4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 22 0.022468
    4 ETW000 [ dev trc,00000] Loading DB library '/usr/sap/IEP/SYS/exe/run/dboraslib.so' ... 462 0.022930
    4 ETW000 [dlux.c ,00000] *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/IEP/SYS/exe/run/dboraslib.so") FAILED
    4 ETW000 "Unable to find library 'libclntsh.so.10.1'." 5275 0.028205
    4 ETW000 [dbcon.c ,00000] *** ERROR => Couldn't load library '/usr/sap/IEP/SYS/exe/run/dboraslib.so'
    4 ETW000 7277 0.035482
    2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/IEP/SYS/exe/run') or dbms_type ('ORA')"
    I have confirmed the environment is correctly set by comparing with the current workable DI include replaced the kernel from workable DI.
    Also redo the steps for oracle client based on SAPNOTE 819829.
    It's looks like oracle client issue. But, i can't find out what is the issue.
    Kindly advise.
    Thank you.

    Hi Deepak,
    As per requested.
    trc file: "sapstartsrv.log", trc level: 0, release: "721"
    pid 12457
    [Thr 01] Fri Jun 27 09:28:03 2014
    No halib defined => HA support disabled
    CCMS agent initialization for instance type ABAP: return code 0.
    CCMS agent start: return code 0.
    Initializing SAPControl Webservice
    Starting AutoRestart thread
    [Thr 03] Fri Jun 27 09:28:04 2014
    AutoRestart thread started
    SapSSLInit failed => https support disabled
    Starting WebService thread
    Webservice thread started, listening on port 54013
    Trusted http connect via Unix domain socket '/tmp/.sapstream54013' enabled.
    trusted unix domain socket user is stopping SAP System at 2014/06/27 9:29:05
    trusted unix domain socket user is starting SAP System at 2014/06/27 9:29:11
    trusted unix domain socket user is stopping SAP System at 2014/06/27 9:30:32
    trusted unix domain socket user is starting SAP System at 2014/06/27 9:30:56
    [Thr 03] Fri Jun 27 09:48:04 2014
    Timestamp of sapstartsrv executable cannot be retrieved. Checking again in five minutes
    [Thr 03] Fri Jun 27 09:53:04 2014
    Timestamp of sapstartsrv executable cannot be retrieved. Checking again in five minutes
    [Thr 03] Fri Jun 27 12:13:04 2014
    Timestamp of sapstartsrv executable cannot be retrieved. Checking again in five minutes
    SAP-R/3-Startup Program Rel 721 V2.0 (2008/11/15)
    Starting at 2014/06/27 09:30:57
    Startup Profile: "/usr/sap/IEP/SYS/profile/START_D40_a2prde04"
    Setup Environment Variables
    (14322) SETENV DIR_LIBRARY=/usr/sap/IEP/D40/exe
    (14322) SETENV LD_LIBRARY_PATH=/usr/sap/IEP/D40/exe:/usr/sap/IEP/D40/exe
    (14322) SETENV SHLIB_PATH=/usr/sap/IEP/D40/exe:/usr/sap/IEP/SYS/exe/run:/usr/sap/IEP/SYS/exe/uc/hpia64:/oracle/client/11x_64/instantclient
    (14322) SETENV LIBPATH=/usr/sap/IEP/D40/exe:
    (14322) SETENV PATH=/usr/sap/IEP/D40/exe:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/contrib/Q4/bin:/opt/perl/bin:/opt/ipf/bin:/opt/gvsd/bin:/opt/nettladm/bin:/opt/fcms/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/sas/bin:/opt/graphics/common/bin:/opt/atok/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/sec_mgmt/bastille/bin:/opt/caliper/bin:/opt/drd/bin:/opt/dsau/bin:/opt/dsau/sbin:/opt/resmon/bin:/opt/firefox:/opt/gnome/bin:/opt/perf/bin:/opt/propplus/bin:/usr/contrib/kwdb/bin:/opt/mozilla:/opt/perl_32/bin:/opt/perl_64/bin:/opt/prm/bin:/opt/sfm/bin:/opt/swm/bin:/opt/sec_mgmt/spc/bin:/opt/ssh/bin:/opt/sentinel/bin:/opt/swa/bin:/opt/hpsmh/bin:/opt/thunderbird:/opt/langtools/bin:/opt/wlm/bin:/opt/gwlm/bin:/opt/ignite/bin:/usr/sap/IEP/SYS/exe/uc/hpia64:/usr/sap/IEP/SYS/exe/run:/home/iepadm:.
    (14322) SETENV SECUDIR=/usr/sap/IEP/D40/sec
    Execute Pre-Startup Commands
    (14323) Local: /usr/sap/IEP/SYS/exe/run/sapcpe pf=/export/sapmnt/IEP/profile/IEP_D40_a2prde04
    (14331) Local: /usr/sap/IEP/SYS/exe/run/sapcpe pf=/export/sapmnt/IEP/profile/IEP_D40_a2prde04 list:/usr/sap/IEP/SYS/exe/run/sapcrypto.lst
    (14335) Local: /usr/sap/IEP/D40/exe/sapmscsa pf=/export/sapmnt/IEP/profile/IEP_D40_a2prde04 -n
    (14337) Local: rm -f dw.sapIEP_D40
    (14339) Local: ln -s -f /usr/sap/IEP/D40/exe/disp+work dw.sapIEP_D40
    (14341) Local: rm -f ig.sapIEP_D40
    (14343) Local: ln -s -f /usr/sap/IEP/D40/exe/igswd_mt ig.sapIEP_D40
    Starting Programs
    (14347) Starting: local dw.sapIEP_D40 pf=/export/sapmnt/IEP/profile/IEP_D40_a2prde04
    (14322) Waiting for Child Processes to terminate.
    (14348) Starting: local ig.sapIEP_D40 -mode=profile pf=/export/sapmnt/IEP/profile/IEP_D40_a2prde04
    (14348) New Child Process created.
    (14348) Starting local Command:
    Command: ig.sapIEP_D40
    -mode=profile
    pf=/export/sapmnt/IEP/profile/IEP_D40_a2prde04
    (14347) New Child Process created.
    (14347) Starting local Command:
    Command: dw.sapIEP_D40
    pf=/export/sapmnt/IEP/profile/IEP_D40_a2prde04
    (14322) **** 2014/06/27 09:31:51 Child 14347 terminated with Status 0 . ****
    (14347) **** 2014/06/27 09:31:51 No RestartProgram command for program 0 ****
    Thank you.

  • [SOLVED] - [Gnome 3] GDM error dialog "failed to start session GNOME"

    Hi,
    Just installed Gnome 3 from testing.
    First boot crashed, but that was a missing library for splashy, so removed splash from my grub boot line.
    Now the system boots to GDM. I can start my Xfce session without any issues, but if I select Gnome, I get a dialog "Failed to start session GNOME".
    Following is my GDM greeter log:
    gnome-session[2208]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "/usr/lib/at-spi/at-spi-registryd" (No such file or directory)
    (gnome-settings-daemon:2215): Gtk-WARNING **: gtk_window_set_wmclass: shouldn't set wmclass after window is realized!
    ** (process:2228): DEBUG: Greeter session pid=2228 display=:0 xauthority=/var/run/gdm/auth-for-gdm-RuDxNi/database
    gnome-settings-daemon: xcb_io.c:140: dequeue_pending_request: Assertion `req == dpy->xcb->pending_requests' failed.
    Failed to play sound: File or data not found
    gnome-session[2208]: WARNING: Application 'gnome-settings-daemon.desktop' killed by signal
    (polkit-gnome-authentication-agent-1:2229): Gdk-WARNING **: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
    (gnome-power-manager:2226): Gdk-WARNING **: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
    (gnome-settings-daemon:2234): Gtk-WARNING **: gtk_window_set_wmclass: shouldn't set wmclass after window is realized!
    gdm-simple-greeter[2228]: Gtk-WARNING: gtkwidget.c:6778: widget not within a GtkWindow
    gdm-simple-greeter[2228]: WARNING: Unable to read from file /etc/arch-release
    Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1000007 (Login Wind)
    Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
    gdm-simple-greeter[2228]: Gdk-WARNING: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
    Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1000007 (Login Wind)
    Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    (gnome-settings-daemon:2234): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    All help greatly appreciated.
    Cheers.
    Last edited by Padfoot (2011-04-08 23:38:59)

    I just remembered to do that.....
    Think I have found my problem.
    The Arch Wiki for Gnome 3 has the line for installing to a new system
    # pacman -Syu testing/gnome
    This installs gnome 3, but does not include gnome-shell or gnome-panel
    Just installing them now. Will report back shortly.
    Maybe the Wiki should be updated to reflect this, or the package testing/gnome updated to depend on gnome-shell and gnome-panel.
    Cheers.

  • TS1717 Apple mobile device failed to start

    During installation of iTunes, error message: Apple mobile device failed to start and something about not having "privileges"
    Some ideas?

    I finally re-tried the process in this link: http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/ and it worked.  I had to do a few extra things though. I read every comment and noticed after I used this process I had the same problem as some others.  My device was showing with an exclamation point in the device manager and said that the driver was unsigned or something.  I then did a repair on all the itunes .msi files and tried to install the mobile device support.  This time it worked. After trying everything else for over a month I couldn't believe I finally got it to work!
    Not sure if everyone will have to do the extra steps that I did, but hopefully this helps someone.

Maybe you are looking for