OS X Lion Server hangs on install ("authenticating")

I'm trying to update my headless/keyboardless/mouseless Mac Mini Server (mid-2010) running OS X 10.6.8 Snow Leopard Server. I've been able to download Server.app from the App Store without problem, but when I run it, it asks for my admin password and hangs at the "Configuring Services" dialog with an "Authenticating" message in the bottom left corner. It appears to be hanging at this authentication bit.
WHAT I DID
Installed Lion.
Downloaded Lion Server from App Store.
Launched Server.app.
WHAT I EXPECTED
Lion Server to install.
WHAT HAPPENED
Hangs at "Configuring Services" dialog with an "Authenticating" message in bottom left corner.
Eventually times out with a "The request timed out" error message.
Help?

I had the same ""The request timed out" error message", with Mac mini server 2010 version.
I'm going to crazy for this strange bug.
It still can login OS succesfully, but the server app seemed something wrong on my system.
(Now, I can't login the Server even the correct password is entried)
You can see the Server app is not "INSTALLED" situation from the following photo.
but when I click "INSTALL" server app,
It didn't have any help if I choose Software Update frim Apple menu.
So I tried to delete the server app, the click "INSTALL" again,
such texts shown,
Since both Lion & Lion Server already purchased on 19 July,
I just click "Buy Both",  I remembered it seemed both apps begin re-download,
but the Server app still not work, can't login anymore(my password unrecognized),
still "not INSTALLED" on Mac app store Purchase record,
Then I got another receipt from Apple, the purchase became double-counted.
After reporting the problem to Apple, refund was done.
But My Server.app was still in a very strange situation.....
I only tried re-install server.app but without whole system re-install in the above case,
maybe I will try to click "Buy Both" again,
try to Re-install the whole system later to see if the bug disappears.

Similar Messages

  • Upgrade from Snow Leopard Server to Lion Server hangs at configuring services...

    I am running the Mac mini with snow leopard server 2.53 ghz 2GB of ram, 2x500GB hard drives, and have followed through the process to install Lion Server. The installation appears to be hung at the Configuring Services section of the setup process. I have left it for a couple of hours and nothing has progressed.
    Should I leave it longer, hoping that it will work through the process (if in fact it is working through something)?
    How long should this normally take?
    As this is my work server, hosting mail, web, FTP, and file sharing, it is rather important to get it up and running as quickly as possible.
    Any thoughts on how I can get it moving?
    Hard power off of the Mac Mini reboots the machine, then proceeds back to the setup page, and then hangs on the same Configuring Services.
    Any assistance would be much appreciated.
    Thanks.

    Lion Server Upgraders,
    beware and proceed with caution.
    Apple web site is naively optimistic on the upgrade process:
    "To upgrade your Mac to OS X Lion, you don’t need to drive to a store, bring home a box, and install a bunch of discs. All you do is click the Mac App Store icon, buy Lion for $29.99, and your Mac does the rest. Just make sure you have what you need to download Lion to your Mac."
    And then has a 3 step process...
    This is completely miss leading.
    Read this document first: http://manuals.info.apple.com/en_US/lion_server_upgrading_migrating.pdf
    It will make it readily apparent that moving from Snow Leopard Server to Lion is not going to be simple.
    Having done this twice now.. I have found that:
    1. Open Directory migration is a weak point. Lion & Snow Leopard Open Directory are not compatible, so if you have masters & replica then expect trouble. I have an unresolved issue trying to get a simple Lion Server to Lion Server Open Directory replica up and running. This compatibility seems to also cause migration to fail, as I found that all my local User/Groups transferred ok but non of the /127.0.0.1/LDAPv3 (Open Directory) ones did. This is a very important item, as all the mail accounts in dovecot use LDAP generated UID, so you have to be careful that you do not loose mail accounts.
    2. Mail - your mail aliases will not transferred, so you will need to reapply the aliases.
    3. Web Server Setup - This broke, under migration as I gather the entire Web serving tree has changed. In particular I had "Snow Leopard" Web Mail (which is based on Squirel) on my "Snow Leopard" Server and this is now dead...
    4. Digital Certificates - I found that the valid (ie signed by trusted CA's) did not get migrated, so I had to re-imported my Digital Certificates. If you have paid for third party CA certificates then make sure you have got these copied somewhere, as if you loose them then you will likely need to go to your provider and get a certificate revocation and new certificate, which will cost you money!
    Cheers,
    Zebity.

  • Mac Lion Server Error 24 Installing Elements 10 DVD or Trial Download

    Error Package Support Uploaded: 00-30402-091818122011
    xit Code: 24
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 18 error(s), 0 warning(s)
    ERROR: DW001: Set payload cancelled status
    ERROR: DW049: Payload {007A2A28-D6A8-4D91-9A2B-568FF8052215} has an action "install" but no resultState
    ERROR: DW049: Payload {0AA9D11A-227D-45AB-A5D5-6F5F6E81D5E3} has an action "install" but no resultState
    ERROR: DW049: Payload {0AF29C46-6E82-4402-9019-8A6BB0F981D4} has an action "install" but no resultState
    ERROR: DW049: Payload {28B74F2E-2E70-4B44-A581-0C19F62A5D6E} has an action "install" but no resultState
    ERROR: DW049: Payload {52411D2C-81DD-442F-81C7-D867F6D73491} has an action "install" but no resultState
    ERROR: DW049: Payload {60CB5C6D-5B99-45D3-BAB5-E7728182101E} has an action "install" but no resultState
    ERROR: DW049: Payload {6A2E619B-E4AC-433B-A648-D458CE543A96} has an action "install" but no resultState
    ERROR: DW049: Payload {6F3A624B-1B72-4081-96E8-23261F389C5C} has an action "install" but no resultState
    ERROR: DW049: Payload {A44863BF-8DB8-4D22-88DB-5A02BE319840} has an action "install" but no resultState
    ERROR: DW049: Payload {BC5880C9-E055-4E57-826A-749E79C498C2} has an action "install" but no resultState
    ERROR: DW049: Payload {BD0D6363-E961-410F-8BF4-ECD8795F3923} has an action "install" but no resultState
    ERROR: DW049: Payload {E6FE3234-EA6D-4F21-AF83-E7279A985CD1} has an action "install" but no resultState
    ERROR: DW049: Payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} has an action "install" but no resultState
    ERROR: DW049: Payload {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} has an action "install" but no resultState
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Camera Profiles Installer: User cancelled installation
    ERROR: DW001: User cancelled the operation

    No I did not cancel the install and I ran it dozens of times.  The solution that was finally successful was to copy the files/folders from the .dmg on the disk to a temporary directory.  I then had to enable the root user which the instructions from Apple for Lion do not work for Lion Server which I have.  I used the
    this command from a terminal window: dsenableroot
    I then ran the sudo from the temporary directory I copied the .dmg files/folders to: sudo Install.app/Contents/MacOS/Install
    This was one of the most frustrating 5 days trying to get this software to load that I've ever had.  The reason I bought a Mac was that I was told Adobe PSE and Photoshop CS runs much better on a Mac and it wasn't running well at all on my nearly 4 year old Lenovo notebook.  I should have learned UNIX commands when I made my employees learn Linux.  I didn't think I'd ever need this knowledge on a Mac but I was wrong.
    You obviously didn't look at the error package I loaded which is posted at the beginning of my post "Error Package Support Uploaded: 00-30402-091818122011".
    It is not very encouraging that I see other users with the same problem and Adobe has not issue a bulletin in the forums about loading PSE on Lion Server.  The existing stock can't obviously be fixed but putting a prominent message on the forums as was done for the install issues with Premiere Elements 10.  I'm pretty disappointed with Adobe at this point.  I hope I will have a better experience once I get my backlog of .raw photos converted to .jpg which is why I bought Photoshop Elements 10.

  • Lion Server hangs

    I have a mini server that I updated to Lion Server and it seems like if someone is logged in, and then it goes into screen saver mode, then I can't log back into the machine.  It's pretty much hung.
    I'm really thinking about reverting back to Snow Leopard Server. 

    I have exactly the same issue! Do you have the system on a RAID or just on one single internal disk?
    We have a Lion Server on a Mac Mini, with the system on a Promise RAID.
    It worked fine for 3 months. Then suddenly it started to when I restarted the machine, everything seemed fine. For 2 minutes, then whatever application you start hangs up and ballooning forever. SSH works fine, but we really need to get into the GUI.
    Strangely enough, all services the Lion Server is providing works fine and our users don't notice anything.
    Tried repair permissions, start in safe mode and Disk Warrior. Nothing. Also checked the log for something weid, but nothing.
    Anyone??

  • Lion Server Hangs After Apple Logo

    Hello all,
    I've seen simillar posts about this but nothing concrete for a fix before calling for service. Here's a short history. Our macpro lion server (2012) machine had a bad system update from 10.7.1 to 10.7.4 if I remenber correctly. The update went bad and I had to call service to fix and reupdate back to 10.7.4 After that it all seemed great. We purchased extensis porfolio pro for our cd image database and it requires installation on the server itself. After trying to install, message popped up the installer unexpectedly quit. Tried the installer on another machine and worked fine so installer is safe. Went to disk utility to fix permissions and the app itself would unexpectedly quit so I tried a restart. After the restart it boots but after the Apple logo it disappears and all I get is the grey screen with the occasional spinning grey circle. Did a fsck -f and it modified the disk so I did it again until it came up ok. After the second round it came back ok and still the same result after restart. Good thing is our server is still accessible (for now) and we can still do our work until I can copy files. I plan to do tonight after everyone leaves is run disk warrior if I can get the cd try to open. Unfortunately I'm not a real mac tech and can only with what I'm familiar with. Repairing permissions and fsck stuff.
    Is there anything else to try or at this point or should I just call applecare?
    Thank you for taking the time.

    I have trouble understanding
    When or how ?
    When you SET LION to be the default startup disk / OS from Windows Taskbar? from Windows control panel "Boot Camp" where you can also set the default?
    If you have any external drives, disconnect them, and anything else.
    If you set Lion to be the default in Lion System Preferences control panel "startup disk" - then boot into Windows using Alt or Control panel, then let it restart itself and go into Mac OS X.
    Normally trouble booting Mac OS is due to a check disk going on, dirty file system journal directory or from forced hard restarts.
    Boot into Recovery Partition Mode and check your partitions and repair. Command R
    There are details though that are probably missing.

  • Lion Server odbc mysql install training/help

    Is there any video training available from apple. They don't to document anymore. I am looking to install mysql and odbc on my Lion Server, but would like to see what Apple supports versus all of the incomplete product websites trying to sell me something without documentation.
    I have look at Lynda.com and it's ok. But know seems to approach training from what you might really use a server for. I need my Lion Server for my Web server development, not a Work Group Server. I am developing with PHP, HTML5, MySQL, and Flex ? maybe. Not sure of the future but moving away from Java because of to many frameworks and it has become to fragment as a development environment.

    Same issue here. re-patitioned HD, install Lion 10.7, downloaded server app, progress bar sticks, get "network error" message. Create new network location, delete previous lovations, same result. Refresh DCHP lease, same result. Set static IP, same result. Use wireless, same result.
    Where to next??

  • New Lion Server and Client install... what to expect?

    Ok, so in a week I have a Mac Mini Server and a classroom of clients to set up, image, OD master, connect to AD, manage prefs etc (If I had the choice, I wouldn't touch Lion for at least 6 months, but it's not a luxury I have).
    I have no AD system to test it with here, so what fun and games can I look forward to? Looking around, it seems that binding to AD is currently rather unreliable 

    The 3800 can handle MaxTurbo and TV.  You can feed your 5 TV Receivers over good quality RG59 or over Ethernet, or up to two may be connected via Wireless.  
    The preference is for Ethernet over Cat5e/Cat6 or Wireless.  Wireless is liked by installers because they don't have to run wires for them.  Ethernet is by far the best choice.
    Since the 3800 (or any U-verse RG) only has 4 RJ45 ports, you cannot connect all 5 TV Receivers directly to the RG via Ethernet, so some would have to move to a switch connected to the RG.  You need to be careful when mixing IPTV and general traffic on a switch, especially if you have a third party wireless access point or wireless router connected to that switch.
    Do be aware of the limitation of no more than 4 LIve HD streams coming into your home at the same time.  I mention this because you say 5 TVs.  You can view different programs on all 5 TVs, but some would have to be recorded.
     

  • Help needed: Lion Server hangs during reboot (Symbol not found: _kCUIMaskOnlyKey)

    Hi,
    I not sure if this is the right forum but hopefully someone might be able to help.
    Yesterday I was configuring my local mail system. (Local IMAP server and I checked the access from WLAN and Internet. Everything seems to
    work fine until I noticed, that mails from my inbox would disappear automatically after a couple of seconds. I switched all mail clients (iPhone, ...) of,
    sent a test mail - but the problem stays. I had no idea what was going on. So I decided to reboot the system. The system came up again and I logged in.
    It looked like a fresh desktop was created and Safari wanted to make changes to the system. I decided to roll back the system and reinstalled it from
    a backup before I made all the changes. After restoring the system hangs with the gray screen. I tried a reboot in save mode - same result. Then
    I rebooted in single user mode. The file system looked OK, but I found many crashes in the system logs. Continuing to multi user mode did not succeed.
    I received all the crash logs on the console.
    Next I removed the disk and connected it to my laptop. I have extracted the last couple of line from the system log file:
    Feb 26 00:58:44 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005835-1_l ocalhost.crash
    Feb 26 00:58:44 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]: dyld: Symbol not found: _kCUIMaskOnlyKey
    Feb 26 00:58:44 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]:   Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    Feb 26 00:58:44 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]:   Expected in: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
    Feb 26 00:58:44 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]:  in /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    Feb 26 00:58:44 localhost com.apple.launchd[1] (com.apple.applepushserviced[697]): Job appears to have crashed: Trace/BPT trap: 5
    Feb 26 00:58:44 localhost com.apple.launchd[1] (com.apple.applepushserviced): Throttling respawn: Will start in 9 seconds
    Feb 26 00:58:44 localhost ReportCrash[55]: Saved crash report for applepushserviced[697] version ??? (???) to /Library/Logs/DiagnosticReports/applepushserviced_2012-02-26-005844_localhost.c rash
    Feb 26 00:58:44 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/applepushserviced_2012-02-26-00 3929_localhost.crash
    Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.PasswordService[699]): Job appears to have crashed: Trace/BPT trap: 5
    Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.PasswordService): Throttling respawn: Will start in 9 seconds
    Feb 26 00:58:45 localhost ReportCrash[55]: Saved crash report for PasswordService[699] version ??? (???) to /Library/Logs/DiagnosticReports/PasswordService_2012-02-26-005845_localhost.cra sh
    Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.softwareupdatecheck.initial[700]): Job appears to have crashed: Trace/BPT trap: 5
    Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.softwareupdatecheck.initial): Throttling respawn: Will start in 9 seconds
    Feb 26 00:58:45 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/PasswordService_2012-02-26-0035 06_localhost.crash
    Feb 26 00:58:45 localhost ReportCrash[55]: Saved crash report for SoftwareUpdateCheck[700] version ??? (???) to /Library/Logs/DiagnosticReports/SoftwareUpdateCheck_2012-02-26-005845_localhost .crash
    Feb 26 00:58:45 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/SoftwareUpdateCheck_2012-02-26- 003020_localhost.crash
    Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.xpchelper.59000000-0000-0000-0000-000000000000[714]): Job appears to have crashed: Trace/BPT trap: 5
    Feb 26 00:58:45 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]: dyld: Symbol not found: _kCUIMaskOnlyKey
    Feb 26 00:58:45 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]:   Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    Feb 26 00:58:45 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]:   Expected in: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
    Feb 26 00:58:45 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]:  in /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    Feb 26 00:58:45 localhost ReportCrash[55]: Saved crash report for xpchelper[714] version ??? (???) to /Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005845_localhost.crash
    Feb 26 00:58:45 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005835-2_l ocalhost.crash
    Feb 26 00:58:45 localhost com.apple.launchd[1] (com.apple.xpchelper.00000000-0000-0000-0000-000000000000[721]): Job appears to have crashed: Trace/BPT trap: 5
    Feb 26 00:58:45 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[723]: dyld: Symbol not found: _kCUIMaskOnlyKey
    Feb 26 00:58:45 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[723]:   Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    Feb 26 00:58:45 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[723]:   Expected in: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
    Feb 26 00:58:45 localhost com.apple.xpchelper.00000000-0000-0000-0000-000000000000[723]:  in /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    Feb 26 00:58:45 localhost ReportCrash[55]: Saved crash report for xpchelper[721] version ??? (???) to /Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005845-1_localhost.crash
    Feb 26 00:58:45 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005835_loc alhost.crash
    Feb 26 00:58:46 localhost com.apple.launchd[1] (com.apple.xpchelper.59000000-0000-0000-0000-000000000000[722]): Job appears to have crashed: Trace/BPT trap: 5
    Feb 26 00:58:46 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[724]: dyld: Symbol not found: _kCUIMaskOnlyKey
    Feb 26 00:58:46 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[724]:   Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    Feb 26 00:58:46 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[724]:   Expected in: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
    Feb 26 00:58:46 localhost com.apple.xpchelper.59000000-0000-0000-0000-000000000000[724]:  in /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    Feb 26 00:58:46 localhost ReportCrash[55]: Saved crash report for xpchelper[722] version ??? (???) to /Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005846_localhost.crash
    Feb 26 00:58:46 localhost ReportCrash[55]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/xpchelper_2012-02-26-005836-1_l ocalhost.crash

    Had the exact same problem yesterday on my mid-2010 Mac Pro with OS X 10.7.3 Server. Formatted my SSD boot drive and restored via time machine and I had the exact same error.
    Here is how to solve it. Download from the apple site the OSX10.7.3ServerComboUpdate.dmg. I downloaded using my laptop. Extract the dmg and get the pkg file inside. Put it on a usb drive. Boot your broken OS X system in recovery mode(option key as you boot up, choose Recovery HD). Open the Terminal(don't use the single user mode,the following command did not work from there). If your OS X installation is Macintosh HD type the following(assuimg your USB disk is called USB,otherwise change it):
    # cd /Volumes/Macintosh\ HD\
    # mkdir update
    # cd update
    # cp /Volumes/USBDrive/*.pkg .
    # installer --verbose -pkg MacOSX10.7.3ServerComboUpdate.pkg -target "/Volumes/Macintosh\ HD"/
    When it finishes reboot and your OS X will boot normally.
    Hope that helped.

  • Lion Server licensing

    Hi All
    I am looking at running Lion server in my small office rather than a windows server. We currently have 5 macs running lion and was thingking of getting a new mac mini with the server software.
    I can't seem to find any information on buying the 5 licences I require only a volume amount. Can anyone advise how much and what I need to be buying form my needs.
    Thanks

    I'm not sure what you're looking for.
    You already have the 5 Lion licenses - they're installed and running on your Lion Clients.
    The only thing you need is one Lion Server license to install and run on the server - and if you buy the Mac Mini Server, it comes pre-installed with the Lion Server license.
    You don't need any messy client-access-licenses (like under certain other OSes). Mac OS X Lion Server is licensed by the server, regardless of how many clients connect.

  • I downloaded OS X Lion Server using my apple developer account? Will it stay after my enrolment is over?

    The title says it all. I downloaded OS X Lion Server using my apple developer account? Will it stay after my 1 year enrolment is over? I basicaly signed in and redeemed a code to download OS X Lion Server. It is now in my purchased list in the Mac App Store. But I got it by redeeming a code that I got through being an Apple Mac Developer. I wanted to know if I decided not to pay $99 next year to renew my enrolment, will I still be able to keep OS X Lion Server in my purchased list in the Mac App Store. When I click on More Apps by Apple in the Mac App Store, it takes me to the page with all their apps. OS X Lion Server says it is installed. But I want to know if it will still be in the purchased menu after the enrolment is finished and not renewed.

    I am a new Mac Developer. I checked the page you gave me and I think it's more to do with topics about programming and using the developer tools and pre-release software. I don't think my question relates to any of the topics there. OS X Lion Server has already been released and is available for the public. I was planning on buying it. But before I did that I wanted to become a developer. So I enrolled in the Mac Developer program and I went to download OS X Mountain Lion Developer Preview 2 when I realized that I could also download the already released OS X Lion Server which was available for $50. So instead of buying it from the Mac App Store, I just got the redemption code from the Mac Developer Center and downloaded it free of charge (I did pay the $99 to be a Mac Developer though). Now it has been added to the purchased list in the Mac App Store and when I click the More Apps by Apple button in the Mac App Store, it takes me to the page with all Apple apps. And now on that page it says that OS X Lion Server has been installed. I am just wandering if once my enrollment is over next year April, and I decide not to renew my enrolment, will I still be able to have the OS X Lion Server in my list of purchased apps and still be able to re-download it? Sorry if this is too long, but I am trying to be as clear as possible. Sometimes when I ask questions, I wait a whole day and go back there, only to find out that they didn't understand what I meant. Thank you .

  • How to reinstall OS X Lion Server

    I'm newbie os x admin . I bought new Mac Mini 2010 with Lion Server. I want to do RAID 0 with my HDD. 
    I make image for Recovery Partition. Then  format partition and do RAID 0.
    I setup with Mac OS X Lion 10.7 GM build 11A511
    I success to install but .... No Lion Server.
    I try to check Mac Store but I found  I need to buy  Lion Server License ?
    These is my Question
    1.  Lion Server that pre-install with Mac Mini is not license version or not?
    2.  Should  I  restore from  recovery partition  and get Lion Server from them ?
    3.  How I make recovery DVD or anything that easy to reinstall ?
    Thank You very much.

    The 2010 Mac mini Server did not come with Lion Server, it was shipped with Snow Leopard Server. To go from Snow Leopard to Lion is a paid upgrade, not a free update. Up until Snow Leopard there was a SL client OS and a SL Server OS. Now Lion Server is an add-on purchase to the Lion client. So you must buy and install the Lion client, then the second step is to buy and install the Lion Server add-on. You purchase both Lion and Lion Server through the Mac App Store.

  • Lion Server Purchased in App Store

    Hi,
    I purchased and insstalled Lion Server in App Store.  It went fine, but when I look in "Purchased" tab in App Store, "Lion Server" is listed as "INSTALL" as opposed to "INSTALLED."  Is it normal??

    I am a new Mac Developer. I checked the page you gave me and I think it's more to do with topics about programming and using the developer tools and pre-release software. I don't think my question relates to any of the topics there. OS X Lion Server has already been released and is available for the public. I was planning on buying it. But before I did that I wanted to become a developer. So I enrolled in the Mac Developer program and I went to download OS X Mountain Lion Developer Preview 2 when I realized that I could also download the already released OS X Lion Server which was available for $50. So instead of buying it from the Mac App Store, I just got the redemption code from the Mac Developer Center and downloaded it free of charge (I did pay the $99 to be a Mac Developer though). Now it has been added to the purchased list in the Mac App Store and when I click the More Apps by Apple button in the Mac App Store, it takes me to the page with all Apple apps. And now on that page it says that OS X Lion Server has been installed. I am just wandering if once my enrollment is over next year April, and I decide not to renew my enrolment, will I still be able to have the OS X Lion Server in my list of purchased apps and still be able to re-download it? Sorry if this is too long, but I am trying to be as clear as possible. Sometimes when I ask questions, I wait a whole day and go back there, only to find out that they didn't understand what I meant. Thank you .

  • OSX server - Comment on Wiki (Mountain Lion Server) does not work

    OSX server - Comment on Wiki (Mountain Lion Server) does not work - it always give an error "Comment could not be saved, please try again" eitheir upgrade from Lion Server or fresh install.

    sorry, I had been allowed anyone to comment, and use wiki owner user also.

  • Using Lion Server Radius for authenticating "other" clients

    Hi I've been trying to get the Radius service in Lion Server to authenticate users of my SQUID web proxy. I have followed the squid wiki's instructions to configure the squid server as a radius client and pass authentication requests to the Lion Server Radius (I hope). However I'm trying to configure and test the Lion Server Radius. As Lions Server Admin GUI for radius only lets to add Airport Basestations, I've been trying to dig around for what underlying config files to edit.  I have tried 2 methods of adding the client details to radius:
    1. By editing the /etc/raddb/client.conf, and adding/changing (for example):
    client localhost {
         secret     = mysecretpassphrase
    client 192.168.0.0/24 {
         secret              = mysecretpassphrase
         shortname       = local-lan-clients
    and restarting squid. Nothing seems to get mentioned in the radius log file! So I'm not completely convinced that the Lion Radius took any notice of this!
    2. Instead of above, added the same client info using radiusconfig:
    $ sudo radiusconfig -addclient 192.168.0.0/24 local-lan-clients other <return>
    - then it prompts for the secret. With this command I notice the entry/event is recognised in the radius log file, and also looks like some SQL activity. If I dont specify "other" for the nas-type, it defaults to "Aiport Base Station" or similar.
    OK, so forgetting about SQUID for a minute, I can't even get that far as I'm just trying to test the config using the "radclient" utility from the Lion Server and the squid server:
    $ sudo radclient localhost auth mysecretpassphrase <return>
    and... no response, just hangs, nothing in radius log either.
    The Lion Firewall allows TCP and UDP requests into the Radius authentication port.
    Any ideas what else I need to do? Scratching my head, I'm wondering if it is anything to do with SSL? e.g. do I need to make the authentication using the self-signed certificate that Open Directory has? I presume any Airport Base Stations added to radius will use this certificate to establish a secure connection for authentication.

    The RADIUS server in OS X Server is a standard FreeRADIUS implementation with Apple's own custom GUI frontend for configuring it and which only allows adding AirPort base-stations. In Mountain Lion Server it is even limited to a specific configuration for the AirPort base-station.
    However if you follow the normal command-line instructions and steps for configuring FreeRADIUS then it will be possible to add any type of RADIUS client.
    While as far as I can see by manually configuring the FreeRADIUS server in OS X Server should enable you to do what you want, most people chose to configure Squid to use either a PAM or the LDAP modules for Squid to in this case authenticate directly to Open Directory (which is of course based on LDAP).
    I myself have used a PAM in the past with Squid to successfully configure Squid to authenticate users via Open Directory. I was even able to specific an Open Directory group and only allow members of that group access via the Squid Proxy Server. I then went a bit OTT and set up another open-source tool (which was discontinued and I had to fix to get working) to process the Squid logs and store them in MySQL, and then setup FileMaker Pro to connect to the MySQL database via ODBC to allow producing reports.
    Unfortunately the AFP458 website had a major redesign a while ago and many previous technical articles on it are now hard to find. I had used two articles on that site to guide me through setting up Squid and the PAM on a Mac server. I believe the two articles I used are the ones listed below.
    http://afp548.com/2004/09/08/using-os-x-open-directory-to-authenticate-squid-pro xy-server/
    http://afp548.com/2004/12/13/squid-server-using-ldap-authentication/

  • Can I install Lion Server using ARD?

    I've got a 2008 xserve I'd like to update to Lion Server (from 10.6.8 server). Can I successfully install it using ARD or is it going to hang at some point without ARD access waiting for some kind of input to proceed with the installation?
    Thanks
    Eric

    Yes. You need to buy Leon and Server via AppStore. Think twice before click [buy app]... read posts on this group.

Maybe you are looking for

  • My phone made an outgoing call on its own anyone else with this issue?

    My iphone made an outgoing call somehow on its own which is impossible since i have password protected and my phone was on me at the time. There was no way i pocket dialed or someone else called because it was in my hand. Doesn't make sense! Has this

  • Oracle11g R2 Active Data guard using ASM Problem?

    I have configured oracle11g r2 RAC on 2 notes using ASM Grid ( OS unix). RAC is up and running. Now I am configuring Active data Guard. Under grid user instance +ASM and listener is running. Under oracle user static listener is running. All disk is m

  • DO Not Disturb Feature is not working

    Fellow IPHONE users ---- Anybody else having the same issue? I'm trying to use it on my 4s. Thanks

  • WVC54G Audio & email alert Dropdown grayed out

    I have not used the camera in a few years. Pulled it out recently and everything was working great. Went to change the area that the camera monitors for motion and both audio/email dropdowns are grayed out. They were there initially while I was getti

  • Account Description Case stmt

    Hello All, Business wants to display account id and account description concatanated together with an '-' seperating them. Account id and Account desc are two different columns. So far it looks fairly simple as we need to just concatenate the two col