OS X Server Deleted My Website and Configuration Changes
I have a small website I'm using from within my LAN on my MacMini under OS X 10.9.4, using html pages and one Python wsgi script. I ran into an issue with the databases in SQLite and rebooted. (I kept getting errors with the database being locked.)
After the reboot, I couldn't access my site and checked in OS X Server only to find the website was no longer there. (It had survived reboots before.) I checked /Library/Server/Web/Config/apache2/httpd_wsgi.conf and found that my WSGIScriptAlias entries (for that application and a few test/experimental scripts) were gone. All the changes I had made to OS X Server to set up my site were gone.
Is there any reason this would happen? And what can I do to make sure I don't suddenly lose entire website configurations when I reboot in the future?
Thanks that makes my decision easy. NAS is out of the question then since I do want multple devices to gain access to the media at times simultaneously. I did not know that NAS had this restriction. I also prefer the UI of iTunes for sorting thru my media.
So I will go with a dedicated Mac Mini running iTunes alone 24/7.
My next question would be about external storage. I do not need a raid 5 system since all of my media is backed up elswhere. I would like a good size external drive or multple drives that could run with minimal noise. (Prefer no fan) Currently I have been using a 2TB G-Drive with FireWire 800, it is very quiet, no fan and has worked like a charm. The problem is I need more space. I ended up getting a second 2TB GiDrive since the first one worked so well and daisy chained it to the first one with FireWire 800.
The problem is the Mac tend to unmount the drive after extensive sleep. I do have the mac in No Sleep Mode, Wake For Network access and Sleep drive when not needed. The latter does not work and I ended up not letting the drive sleep to prevent the drive from unmounting.
Am I doing something wrong that is causing the drive to unmount on its own?
Is there a better external drive for my needs that allows for growth yet runs quietly?
Similar Messages
-
I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
NarminI am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications. -
Can't login to Server app after hardware and hostname change
I used Carbon Copy Cloner to completely clone a Mac mini Server onto another Mac mini Server. (The idea being that I can install and configure additional software just once and then easily set up identical servers by copying all hard drive contents.) This seemed to work great – the second Mac mini runs fine, including logins, networking etc.
To avoid conflicts between the two servers, I changed the computer name in System Preferences/Sharing and ran:
sudo scutil --set HostName someothername
sudo changeip oldip newip
The problem is that the Server app won't let me log in on the second Mac mini. It lists "This Mac" in the "Choose a Mac" dialog, but when I enter the correct username and password, login is refused (the login dialog is "shaken"). But the same login works for the operating system and SSH, and the account was definitely "allowed to administer this server". On the original Mac mini I cloned from, I can login with this account just fine.
I even added the user account to the "Open Directory Administrators" group using ldapmodify on the command line, but that didn't help.
Is it possible that there's something in the user directory that's bound to the hardware (maybe the Ethernet MAC address) or the hostname?
Do you have any idea how I could fix this? I'm grateful for any help…this hasn't worked for me.
When i follow the additional steps using terminal, the second command brings back the same outcome - 'David is not in the sudoers file. this incident will be reported'.
I've been having trouble with login on for a week but didn't realise this was the problem. I've reset passwords, reinstalled OSX (twice) and now, bizarrely, i can log onto the mac mini as the administrator, but once logged in, the 'administrator' password doesnt work for anything. I can run Software Update because it comes up with a message:
"Software Update wants to make changes. Type an administrator name and password to allow this".
I then put in my password but it shakes and tells me its wrong.
Can anyone advise any other solution? I'm kind of stuck - because the system doesn't recognise my admin password for updates, i cant update anything. And also because my itunes library was set up by a newwer version (I reinstalled OSX believing it would fix it reverting it back to a previous version) i can't listen to any music. -
Grid Console and Configuration Change Console?
I have installed Grid Console 10.2.0.5, and now I'm looking at the Configuration Change Console URL (http://www.oracle.com/technology/software/products/oem/htdocs/config_control.html) wondering if I also need to install this as well.
It appears that the Grid console has all the management packs in, so maybe the Configuration Change Console is a standalone product (i.e. I only want the change management side and not all of grid control?)
Can someone clarify if I'm correct in this?
Regards
Stuart.Thanks. We are just a small IT shop (only 12 databases), so Grid Console and repository are on the same server. I take it that I could also install Configuration Change Console on the same server under a different Oracle home, and use the same grid repository for the Change Configuration Console?
-
Server upgrade broken website and calendars
Hi
Sorry if this is an easy and obvious question. I've just upgraded from 10.7 to 10.9 server, and I'm struggling to get my Wordpress website back up and running, and the Calendar service. Mail seems to be working.
I know that the upgrade moved my web files around - I've found the location of the Wordpress install, as well as the database, but just restoring them to their previous locations doesn't seem to work.
As for the calendar service, I haven't a clue what's happened.
Perhaps naively, I just assumed that the Apple upgrade route would be painfree and simple. I have a full backup, but I'm hoping not to have to downgrade just yet - although it might be simpler to downgrade to the working version, export everything, then reimport with the upgraded version.
Thanks
JeremyJust stumbled on your question....
In 10.7 were you using MySQL as your WordPress db? If so 10.9 no longer uses MySQL. My sugestion is to "reinstall" a more current version of MySQL, then re-import your schema and data. Also be mindful of the PHP. Apple uses older version of PHP in their OS to control other services. Not sure which ones but Calendar might be affected in part.
Had simular problems with Concrete5 CMS. Had to format and reinstall several times before I got it all working. -
Can't log in to server following SP install and configuration
Good morning! I’ve got an interesting one that’s had us scratching our heads here for the past several weeks.
We’re trying to build out a new Sharepoint 2013 farm on server 2012 (have attempted both 2012 and R2 with the same results) and have run into a problem that we can’t seem to find a solution to.
Some background – infrastructure is running Vmware 5.0 u2 on Cisco UCS with EMC VNX storage.
SQL server is a physical server 2008 R2 running on server 2008 R2.
We’re currently running other 2012 based servers in development, but none in full production yet.
All of those servers are behaving normally.
Installation steps are as follows: Deploy template and update OS.
Reboot as necessary.
Turn over to applications manager who does the Sharepoint install.
We’ve tried SP’13 RTM and SP1 slipstreamed from VLSC. Bits install ok, and server reboots.
Following the SP products and config wizard, the reboot causes the server not to be accessible.
It usually stalls on “Please wait” and/or “applying Group Policy registry,” which if you wait long enough will actually get to a login screen.
When you log in, it stalls on please wait for the user profile service.
We’ve left it here over a weekend and had no change. In the event log, we see a 6005 group policy waiting error, but never a 6006 with the timeout.
Yesterday I dug into it with a snapshot of the offending system.
What I found is that if I go in and remove all accounts from the local group policy|log on as a service, the server will allow logins.
With us running a Sharepoint farm with a remote SQL server, some of the SP services need this right, and we have other accounts in group policies from other applications that need to be there for ease of use.
Anyone run into this, and if so, do you have a workaround or solution that I can try?
Thanks,
-bradAre you able to provide the output of gpresult when the machine is experiencing issues? Understand if you are not able to as it may reveal sensitive information.
Do these servers have Internet access (as in, can they access http://crl.microsoft.com)? I'm wondering if SharePoint's need to do CRL checking is causing an issue.
http://blogs.msdn.com/b/chaun/archive/2014/05/01/best-practices-for-crl-checking-on-sharepoint-servers.aspx
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
I am not finding a solution online that I can understand. Please tell me how what the proxy settings are for Mozilla Firefox's server connection? Firefox is my default web browser and I keep getting messages that say, "Proxy server refusing connection to the internet. Check proxy settings or contact server administrator." I go to the Advanced tab, click on change connection to internet settings, and delete manual proxy information and click on "no proxy." When the window closes and I log back onto the laptop, Mozilla Firefox loads up and I get the same error message again. I don't know how to change the proxy server to no proxy so that it will stay that way and not reset itself to the manual proxy information every time the Mozilla Firefox window reopens. Help!
*http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Estimation for delpoyment and configuration of MDM BP 7.1 SP02
Hi,
I would like to know how many days it takes to configure the MDM BP 7.1 SP02. Could anyone tell the rough estimate for this. Also all search iview should work which comes through business packages.Hello,
I just installed MDM 7.1 SP02 server with standard repositories, and configured Portal content in an existing Portal. It is straight forward and took less than a full day, to get to working standard scenarios for Business Partner, Customer and Product for several roles etc.
But you need to consider:
- Does your Portal requirements fit the processes supported by the standard content (i.e. Search->Select->Item Detail Display/Maintain)?
- Do you require special in-process validations, or similar?
- Is the standard look-and-feel acceptable?
- Etc.
If not, you'll need additional configuration and development.
Regards,
Thomas -
I hosted my website and wants to remain connection of db there how can?
Hi,
I hosted my website on temparary domain provider
and i create here DSN less connection with MS Access database and wants to remain it on that remote server , with launched website and it would work over there so what should i do.
if i upload that pages on remote server will it work to connect to my access db ?
if no then wht is the solution for that?
send me reply also on my mail : [email protected]Welcome to the Support Communities.
fosterwoo wrote:
I have designed a basic website...
If it's really basic, consider re-bulding it in a browser-based site builder such as the free Weebly which offers Collaborative Website Editing. ...Since such sites are edited in a web-browser, they can be updated from any modern Mac or PC. -
I originally posted this question to the community section and was advised to post it here. Please bear with me as this will be a long post. I'm including the scenarios involving this reoccurring issue, the trouble shooting steps I've already
taken and the results of several diagnostic tools and logs.
I have a Sony VAIOS VPCEBB33FM lap top since 2011. I have had this issue on an off for a long time. I'm at my wit's end. Any new insights or suggestions would be greatly appreciated.
Scenario Details
1) Some times it's on and off through out the day, sometimes it won't work all day, and once in a while it will work fine for the entire day.
2) I've had this issue across several wireless services, Clear Network accessed with WiMax, Library Wi-fi, Comcast cable internet using wireless router and Wi-fi, and Comcast Xfinity Wi-Fi, to name a few examples.
3) Other devices in the household or library will work with no problems such as my smart phone or my roommates' laptops or desktop computers.
4) Once in a while, the built-in wireless adapter is not found and I have to reinstall the driver. Also the diagnostic tool has had to reset my adapter on an increasing basis.
5) I had my hard drive replaced in December 2014 and my system restored from the System Restore disks that came with it when I bought the laptop. Even though I've been online on an infrequent basis it worked just fine for a while. Now that
I've been online a bit more I'm having the same issues again.
Below are my attempts at trouble shooting so far but I still have not been able to consistently resolve my DNS issues
1) Restarting my adapter
2) Turning off my laptop and removing the power supply for 5-10 minutes before turning it back on.
3) Using the IP Config in Command Prompt
ipconfig /flushdns
ipconfig /registerdns
ipconfig /release
ipconfig /renew
4) Using the NetSh reset in Command Prompt and restarting my laptop
netsh int ip reset c:\resetlog.txt
netsh winsock reset
ipconfig /flushdns
[restart laptop]
5) Configuring the TCP/IP in several settings
Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
I have used the following settings:
a) Obtain an DNS server address automatically
b) OpenDNS
208 67 222 222
208 67 220 220
c) Google DNS
8 8 8 8
8 8 4 4
6) Updating the driver for my Intel Centrino(R) Advanced-N 6250 AGN and Intel Centrino(R) WIMAX 6250 from the Intel website previous having my laptop wiped clean in 2014. It still did not resolve the issue. My laptop
manufacturer as not come up with an driver update for my adapter since 2010. I haven't tried to update the adapter driver from Intel's website since having my laptop repaired due to the fact that Intel strongly recommending using the manufacturer's updates
instead and frankly it didn't make much of a difference when I did it the first time.
7) The last one I've tried as of today is going into Services and changing the start up type to automatic for the following:
Computer Browser [changed from manual to automatic]
DHCP Client [already set to automatic]
DNS Client [already set to automatic]
Network Connections [already set to automatic]
Network Location Awareness [changed from manual to automatic]
Remote Procedure Call (RPC) [already set to automatic]
Server [already set to automatic]
TCP/IP Netbios helper [already set to automatic]
Workstation [already set to automatic]
...and I'm still having DNS issues.
My only guessing are that my laptop came with a lemon adapter that needs to be replaced, some advanced setting(s) that I'm not aware off, or my firewall/anti-virus is interfering. I've used Symmantic Anti-virus and Firewall in the past and currently
Avast Anti-Virus with Microsoft Network Firewall. I've had DNS issues with both anti-virus/firewall set ups.
Below are the results from the diagnostics and tests that I've ran.
Windows Network Diagnostics
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected Detected
Contact your network administrator or Internet service provider (ISP) Completed
Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be...
Details about network adapter diagnosis:
Network adapter Wireless Network Connection driver information:
Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6250 AGN
Manufacturer . . . . . . . . . : Intel Corporation
Provider . . . . . . . . . . . : Intel
Version . . . . . . . . . . . : 13.2.1.5
Inf File Name . . . . . . . . . : C:\Windows\INF\oem17.inf
Inf File Date . . . . . . . . . : Monday, June 14, 2010 9:05:44 AM
Section Name . . . . . . . . . : Install_MPCIEX_GEN_6250_AGN_2x2_HMC_WIN7_64_MOW
Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0087&subsys_13018086
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Informational Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2015-03-07 19:57:14-186
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 22 item(s) total, 22 item(s) displayed
BSSID BSS Type PHY Signal(dB) Chnl/freq SSID
60-02-92-C6-D3-E8 Infra <unknown> -62 11 HOME-C7D4-2.4
60-02-92-A1-75-E0 Infra <unknown> -58 6 HOME-B917-2.4
00-1D-D5-D5-34-F0 Infra <unknown> -73 6 HOME-34F2
60-02-92-A1-75-E1 Infra <unknown> -58 6 (Unnamed Network)
06-1D-D5-D5-34-F0 Infra <unknown> -78 6 xfinitywifi
C4-27-95-C9-C4-2D Infra <unknown> -57 1 HOME-C42D
02-1D-D5-D5-34-F0 Infra <unknown> -74 6 (Unnamed Network)
00-0D-97-07-E0-79 Infra g -75 6 (Unnamed Network)
00-1D-CF-2A-44-C0 Infra <unknown> -86 6 HOME-44C2
02-1D-CF-2A-44-C0 Infra <unknown> -86 6 (Unnamed Network)
F8-E4-FB-3C-87-A2 Infra <unknown> -89 6 YVNM7
06-1D-CF-2A-44-C0 Infra <unknown> -87 6 xfinitywifi
0C-F8-93-7A-13-50 Infra b -87 6 PKennedy
06-F8-93-7A-13-50 Infra b -89 6 xfinitywifi
02-F8-93-7A-13-50 Infra b -87 6 (Unnamed Network)
E0-88-5D-C8-A9-DC Infra <unknown> -80 1 HOME-A9DC
E2-88-5D-C8-A9-DD Infra <unknown> -79 1 (Unnamed Network)
16-CF-E2-43-0B-30 Infra <unknown> -88 1 xfinitywifi
60-02-92-F0-A8-C0 Infra <unknown> -90 11 HOME-96A6-2.4
60-02-92-C6-D3-E9 Infra <unknown> -63 11 (Unnamed Network)
02-1D-D4-EB-87-00 Infra <unknown> -88 11 (Unnamed Network)
06-1D-D4-EB-87-00 Infra <unknown> -88 11 xfinitywifi
Connection History
Information for Auto Configuration ID 1
List of visible networks: 13 item(s) total, 13 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 63 Yes HOME-C7D4-2.4
Infra <unknown> Yes 70 Yes HOME-B917-2.4
Infra <unknown> Yes 43 Yes HOME-34F2
Infra <unknown> Yes 70 Yes (Unnamed Network)
Infra <unknown> No 40 Yes xfinitywifi
Infra <unknown> Yes 71 Yes HOME-C42D
Infra g No 43 Yes (Unnamed Network)
Infra <unknown> Yes 28 Yes HOME-44C2
Infra <unknown> Yes 20 Yes YVNM7
Infra b Yes 21 Yes PKennedy
Infra <unknown> Yes 33 Yes HOME-A9DC
Infra <unknown> Yes 35 Yes (Unnamed Network)
Infra <unknown> Yes 16 Yes HOME-96A6-2.4
List of preferred networks: 3 item(s)
Profile: xfinitywifi
SSID: xfinitywifi
SSID length: 11
Connection mode: Infra
Security: No
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Profile: HTC Portable Hotspot 9F50
SSID: HTC Portable Hotspot 9F50
SSID length: 25
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002
Profile: belkin.332
SSID: belkin.332
SSID length: 10
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002
Information for Connection ID 1
Connection started at: 2015-03-07 19:57:14-186
Auto Configuration ID: 1
Profile: xfinitywifi
SSID: xfinitywifi
SSID length: 11
Connection mode: Infra
Security: No
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 06-1d-d5-d5-34-f0
Security and Authentication
Configured security type: Open
Configured encryption type: None
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: No
Multicast key received: No
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 2068
Ndis Tx: 2543
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 3954
Rx failure: 0
Tx success: 537
Tx failure: 4
Tx retry: 2
Tx multiple retry: 2
Tx max lifetime exceeded: 0
Tx ACK failure: 18
Roaming history: 0 item(s)
InformationalDiagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Result of diagnosis: There may be problem
Network Connection details from Command Prompt (some info hidden for security reasons)
Connection-specific DNS Suffix:
Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
Physical Address: 00-23-15-54-19-B8
DHCP Enabled: Yes
IPv4 Address: 192.168.X.XX
IPv4 Subnet Mask: 255.255.XX.X
Lease Obtained: Saturday, March 07, 2015 7:57:14 PM
Lease Expires: Saturday, March 07, 2015 8:24:44 PM
IPv4 Default Gateway: 192.168.X.X
IPv4 DHCP Server: 192.168.X.X
IPv4 DNS Servers: 75.75.75.75, 75.75.76.76
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::b8de:3ac9:e166:XXX%XX
IPv6 Default Gateway:
IPv6 DNS Server:
Results of Ping and Trace Route in Command Prompt
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>ping www.youtube.com
Pinging youtube-ui.l.google.com [173.194.121.6] with 32 bytes of data:
Reply from 173.194.121.6: bytes=32 time=24ms TTL=55
Reply from 173.194.121.6: bytes=32 time=19ms TTL=55
Request timed out.
Request timed out.
Ping statistics for 173.194.121.6:
Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
Minimum = 19ms, Maximum = 24ms, Average = 21ms
C:\Windows\system32>ping 74.125.239.34
Pinging 74.125.239.34 with 32 bytes of data:
Request timed out.
Request timed out.
Reply from 74.125.239.34: bytes=32 time=3286ms TTL=50
Request timed out.
Ping statistics for 74.125.239.34:
Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
Approximate round trip times in milli-seconds:
Minimum = 3286ms, Maximum = 3286ms, Average = 3286ms
C:\Windows\system32>ping www.hotmail.com
Pinging dispatch.kahuna.glbdns2.microsoft.com [65.55.157.204] with 32 bytes of data:
Reply from 65.55.157.204: bytes=32 time=111ms TTL=237
Request timed out.
Request timed out.
Reply from 65.55.157.204: bytes=32 time=1537ms TTL=237
Ping statistics for 65.55.157.204:
Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
Minimum = 111ms, Maximum = 1537ms, Average = 824ms
C:\Windows\system32>ping 207.46.11.236
Pinging 207.46.11.236 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 207.46.11.236:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Windows\system32>tracert www.youtube.com
Tracing route to youtube-ui.l.google.com [173.194.121.5]
over a maximum of 30 hops:
1 19 ms 13 ms 17 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 13 ms 13 ms 27 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net [68.85.192.205]
3 20 ms 26 ms 21 ms he-5-10-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.94.249]
4 18 ms 34 ms 22 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 19 ms 18 ms 18 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6 35 ms 18 ms 18 ms 209.85.249.217
7 21 ms 19 ms 19 ms 72.14.233.93
8 * * * Request timed out.
9 * 2509 ms 677 ms iad23s25-in-f5.1e100.net [173.194.121.5]
Trace complete.
C:\Windows\system32>tracert 74.125.239.34
Tracing route to nuq04s19-in-f2.1e100.net [74.125.239.34]
over a maximum of 30 hops:
1 54 ms 23 ms 12 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 22 ms 19 ms 17 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 19 ms 19 ms 18 ms he-5-14-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.166.121]
4 18 ms 18 ms 18 ms he-0-15-0-0-cr01.350ecermak.il.ibone.comcast.net[68.86.85.74]
5 19 ms 18 ms 22 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6 22 ms 36 ms 19 ms 209.85.249.217
7 26 ms 23 ms 25 ms 209.85.143.112
8 * * * Request timed out.
9 * * * Request timed out.
10 972 ms * * 216.239.51.97
11 148 ms 97 ms 95 ms 216.239.46.241
12 324 ms 130 ms 432 ms 209.85.246.252
13 * * * Request timed out.
14 1403 ms 101 ms 126 ms nuq04s19-in-f2.1e100.net [74.125.239.34]
Trace complete.
C:\Windows\system32>tracert www.hotmail.com
Tracing route to dispatch.kahuna.glbdns2.microsoft.com [65.55.157.144]
over a maximum of 30 hops:
1 13 ms 13 ms 25 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 13 ms 15 ms 13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 20 ms 19 ms 17 ms he-5-13-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.145]
4 17 ms 20 ms 20 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 17 ms 18 ms 38 ms as8075-2-c.ashburn.va.ibone.comcast.net [173.167.58.82]
6 18 ms 18 ms 36 ms ae4-0.ash-96cbe-1a.ntwk.msn.net [207.46.36.172]
7 * * * Request timed out.
8 * 2191 ms 35 ms ae0-0.atb-96cbe-1b.ntwk.msn.net [191.234.81.167]
9 * * * Request timed out.
10 * * * Request timed out.
11 86 ms 84 ms 84 ms ae4-0.lax-96cbe-1a.ntwk.msn.net [191.234.83.150]
12 86 ms 86 ms 87 ms ae9-0.by2-96c-1a.ntwk.msn.net [207.46.42.176]
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 87 ms 84 ms 85 ms origin.by173w.bay173.mail.live.com [65.55.157.144]
Trace complete.
C:\Users\C.Cunningham>tracert 207.46.11.236
Tracing route to origin.by181w.bay181.mail.live.com [207.46.11.236]
over a maximum of 30 hops:
1 16 ms 16 ms 19 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 18 ms 13 ms 13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 21 ms 19 ms 21 ms he-5-12-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.141]
4 18 ms 21 ms 18 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
Results of Intel WiFi Manual Diagnostics
Test Name Test Result Test Summary
Hardware Test Passed Wireless Hardware is enabled
Driver Test Passed Diver is loaded. NETwNs64 Version 13.3.0.24
Radio Test Passed Radio is ON
Scan Test Passed There are 25 Networks available to connect
Association Test Passed Associated
Authentication Test Passed Authenticated
Signal Test Passed Signal Quality: Poor
Ping Test Failed No Reponse: default gateway, DHCP server
I hope this information is enough to get to the root of this problem once and for all. Please let me know if you any other information such as event logs or statistics.
Thanks in advance.Results of Intel WiFi Event View Log (I deleted some lines since there were basically repeats of the same messages)
#Event Source Time
Error Severity Domain
User Description
45 EvtEngine
3/8/2015 20:40 Success
Connection SYSTEM
iAMT - Failed to read Windows Events Log
46 S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Getting List of adapters.
47 S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Intel adapter(s) found.
156 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
157 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
ATC 06:1d:cf:2a:44:c0 xfinitywifi 6 RSSI=-88
158 S24EvMon
3/8/2015 20:47 Error
Driver SYSTEM
AssociationFailure 06:1d:cf:2a:44:c0 xfinitywifi 6 CNCT_GENERAL_FAILURE
159 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
AddToExclude 06:1d:cf:2a:44:c0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
160 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
161 S24EvMon
3/8/2015 20:47 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
162 S24EvMon
3/8/2015 20:47 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -77
163 S24EvMon
3/8/2015 20:49 Information
TCP/IP SYSTEM
VoIP: Got link down - deleting flows .
164 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-88
165 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
166 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
167 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-89
168 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
169 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
170 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-90
171 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
172 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-82
173 S24EvMon
3/8/2015 20:49 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
174 S24EvMon
3/8/2015 20:49 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -81
175 S24EvMon
3/8/2015 20:50 Information
Driver SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
176 S24EvMon
3/8/2015 20:50 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
177 S24EvMon
3/8/2015 20:50 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
178 S24EvMon
3/8/2015 20:50 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -80
179 S24EvMon
3/8/2015 21:03 Information
Driver SYSTEM
RoamTrigger 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-81 MisBcn=8 RSSITh=-85 Roam Other Reason
186 S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS: (2) Failed to send OID 0xff100055 to driver. Error - 31
187
S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS - Dot11ExtNicSpecificExtension failed (31) -
I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?
Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx -
One of my servers quit responding during some troubleshooting of another issue and when I try
to reconfigure it I am receiving Results as follows:
Reserving url http://+:80
The URL has already been reserved.
It appears to me that there is something with the Virtual Directory that is not allowing me to use it or
overwrite it. If I change the name or the port the new configuration works fine, however this is part of a scale-out test environment and I need to keep the virutal directory names the same.
I have uninstalled and reinstalled SSRS in an attempt to resolve, but that did nothing to this issue.
I have used 'netsh http delete urlacl' command and deleted saved urls also but still am facing issue.
How can I manually list, delete, or edit Virtual Directories in SSRS 2012?Hi Syed,
Based on my research, the issue can be caused by the default values for Report Server Web Service and Report Manager has already been reserved. In order to trouble shoot this issue, please refer to the following steps:
To check this issue, we can run the following command in the command windows:
netsh http show urlacl | find "Report"
It should returns the reserved URL as below:
Reserved URL :
http://+:80/ReportServer/
User:
Reserved URL :
http://+:80/Reports/
User:
Then we can delete the reserved URLs with the command below and recreate them to fix this issue:
netsh http delete urlacl http://+:80/ReportServer/
netsh http delete urlacl http://+:80/Reports/
Reference:
http://fix.lazyjeff.com/2011/12/sql-server-2008-r2-report-server-web.html
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I deleted 4 accounts and the mail app keeps trying to contact the old account server causing thousands of emails to be processed and causing my ISP to charge my account 20-30GB of data. Why is this happening and how do I stop this activity?
I only now have 3 accounts!
The old accounts have been deleted but the "Provide Mail Feedback" selection shows:
Mail Version: 6.5 (1508)
Total Accounts Configured: 4
Account: MFAosImapAccount
8 mailboxes:
2029 messages, 362315022 bytes
0 messages, 0 bytes
0 messages, 0 bytes
0 messages, 0 bytes
0 messages, 0 bytes
0 messages, 0 bytes
0 messages, 0 bytes
795 messages, 167250216 bytes
Account: IMAPAccount
10 mailboxes:
4 messages, 1199297 bytes
0 messages, 0 bytes
556 messages, 160661538 bytes
3036 messages, 802090564 bytes
0 messages, 0 bytes
0 messages, 0 bytes
3019 messages, 801316850 bytes
0 messages, 0 bytes
0 messages, 0 bytes
10 messages, 3104320 bytes
server information:
vendor: Google, Inc.
name: GImap
Account: MFAosImapAccount
10 mailboxes:
180 messages, 40819804 bytes
37 messages, 1013784 bytes
0 messages, 0 bytes
0 messages, 0 bytes
0 messages, 0 bytes
0 messages, 0 bytes
0 messages, 0 bytes
210 messages, 19863404 bytes
0 messages, 0 bytes
0 messages, 0 bytes
Account: LocalAccount
24 mailboxes:
7 messages, 88931 bytes
294 messages, 2849595 bytes
1 message, 6558 bytes
0 messages, 0 bytes
1 message, 9186 bytes
26 messages, 744240 bytes
0 messages, 0 bytes
2 messages, 7698 bytes
502 messages, 4398261 bytes
0 messages, 0 bytes
0 messages, 0 bytes
0 messages, 0 bytes
98 messages, 40510329 bytes
1 message, 2289 bytes
0 messages, 0 bytes
0 messages, 0 bytes
0 messages, 0 bytes
19 messages, 465695 bytes
1268 messages, 76984849 bytes
0 messages, 0 bytes
10 messages, 312327 bytes
0 messages, 0 bytes
6 messages, 113325 bytes
1 message, 10034 bytes
Total Incoming Message Rules: 1Junk Filter Mode: Automatic
number of messages evaluated: 50165
number of messages evaluated as junk: 17332
number of messages manually marked as junk: 433
number of messages manually marked as not junk: 471
training balance: -14
training debt: 741
training credit: 727
2 smart mailboxes:
1 message, 2 criteria
0 messages, 2 criteriaThe "LocalAccount" is "On My Mac" and doesn't correspond to an account on a mail server. That all I can tell you from the information provided.
-
I am new to RemoteApp. I have been using WSE 2012 R2 for some time, mainly for the remote web access web site. I would log into my site (<my name>.remotewebaccess.com/Remote). Then, I would see my server listed under "DEVICES".
I would click on the tile for the server, and the Dashboard would open.
I just followed a tutotial to install the role for RemoteApp publishing. It looks like it worked. I now go to my RD Web App site (<my name>.remotewebaccess.com/RDWeb), and I can log in and see my RemoteApp. But now I cannot
figure out how to get to my server's Dashboard, because when I go to my main web acess site (that ends with "/Remote"), the server is not listed under devices.
Ideally, I would like to see all of my computers, including the server, on the main Remote Web Access site. Also, it would be great if I could see my RemoteApps there too. But I don't know if that is possible. Can anyone help me get
to that state, or know if what I want is possible? I want everything on the same web page:
Devices
Shared Folders
Links
RemoteAppsHi,
Based on your description, I understand that DEVICES tab disappears from Remote Web Access website after RemoteApp
configured. If anything I misunderstand, please don’t hesitate to let me know.
à
But now I cannot figure out how to get to my server's Dashboard, because when I go to my main web acess site (that ends with "/Remote"), the server is not listed
under devices.
Did all users encounter the same issue when access RWA? Please open Dashboard and navigate to USERS tab, then
click the problematic user account and select View the account properties. In Properties of this user account, please navigate to Anywhere Access, then please check if Computer option was checked in
Show selected links on Remote Web Access. Meanwhile, please also use an administrator user account to check if this issue still exists.
In addition, please follow the path: C:\ProgramData\Microsoft\Windows Server\Logs\WebApps folder and check
RemoteAccess log file if find more clues.
Hope this helps.
Best regards,
Justin Gu -
How do I remove All OS X Server data and configuration settings
My server app crashed and I deleted the app using app cleaner and removed the server file from the Library folder, owever when I try to reinstall the setup defults to the setting from the initial install. Is there a way to remove all the stored data, profiles and OD included) as well as any configuration settings, such as those for AEBS and host name and ip address. Essentially, I would like to perform an install that is the same as the initial, a truly cela install. I am using a Mac Mini 2013 model as the server and MBP 15" as the main client.
Completely clean install? Wipe and install OS X, and then reload Server.app and configure that.
Might want to report the error to the App Cleaner folks, too.
Maybe you are looking for
-
How do I restrict users from installing applications?
Or more specifically, yahoo messenger. I can't seem to figure this one out. Two user settings on our machines (public and admin), public does not have admin priveleges, so cannot make modifications like installing applications, but someone seems to k
-
My itunes isn't working correctly - the payments
Okay, I let my brother use my Apple ID then he like put on a prepaid card and then tried to make a purchase with it, but he didn't tell me and I changed my password and the card has no money left and it's say sign in to continue but there's no none o
-
hi, in me21n does validity period indicates the interval in which org needs to make a payment to the vendor . does the document date have a relation with validity periods. in the EKKO table what arethe fileds which corresspond to validity period. Edi
-
Hi, I'm unable to connect to a remote EIS server. The required OLAP Metadata Catalog appears in the drop-down box after entering the correct IP address for the server. However, upon attempting to connect i get the following error message : " Error 20
-
Taking backup of scott schema using dbms_job
hi,' can i get some help in scheduling a backup to run everyday 3pm to take the backup of scott schema using dbms_job? dj.