OSA error 'SOCAT does not exist in any attached database'

I'm connect Oracle Sales Analyzer(OSA11i) and then get the following error message which prevents us from opening the database in OSA.
"Error opening in database, the following error occurred in Express. SOCAT does not exist in any attached database"
Could you please help me to solve my problem?
Thanks& Regards.

SOCAT (or Source catalog) controls the behavior of application and is a two-dimensional variable in the SERVER database. Find the name and location of your "SERVER" database and then try to find out why it is not being attached by your osa session.
An example of OSA database naming convention is:
SATURN.db - Catalog Database
MSATURN.db - Master or Public database
DSATURN.db - Server Database
PSATURN.db - Personal Database

Similar Messages

Error - "Message Interface does not exist in any software components"

HI
This is an Idoc sender - SOAP receiver scenario.
When I try to create the receiver determination, I get a warning message -
" Message interface does not exist in any software components installed on this business system"
I checked all the usual things & also reimported the IDoc metadata.
Any suggestions are appreciated!
Thanks
Rachana

Hi Rachana !!
You should also check if the given idoc type in mapping is the same that in the WE20.
Also try to reactivate your integration directory objects by making any dummy changes.
Check your receiver business system (I mean XI), that the logical systems are ok.
Check this document (page 31):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f2a9fa2-0a01-0010-32ac-d281db722b86
Regards,
Matias.
Message was edited by:
Matias Denker
Message was edited by:
Matias Denker

The contained field name "ADTAGR" does not exist in any of the database tab

hı all
how can l solved thıs problem
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "PUT_QMFECAT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"ADTAGR" does not exist in any of the database tables from the FROM clause.
Information on where terminated
    Termination occurred in the ABAP program "SAPDBZQNQ" - in "PUT_QMFECAT".
    The main program was "ZQMR_BILDIRIM ".
    In the source code you have the termination point in line 732
    of the (Include) program "SAPDBZQNQ".
Error occurred during batch input processing
    The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
     occurred in
    procedure "PUT_QMFECAT" "(FORM)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPDBZQNQ "; its source code begins in line
    715 of the (Include program "SAPDBZQNQ ".
FORM put_qmfecat.
DATA: l_tab_fields TYPE rsfs_tab_fields.
DATA: l_ds_clauses TYPE rsds_where.
Dynamische Feldselektion
MOVE 'QMFECAT_C' TO l_tab_fields-tablename.
READ TABLE select_fields WITH KEY l_tab_fields-tablename
                                INTO l_tab_fields.
IF sy-subrc <> c_rc00.
    CLEAR l_tab_fields.
ENDIF.
Dynamische Selektionskriterien
MOVE 'QMFECAT' TO l_ds_clauses-tablename.
READ TABLE dyn_sel-clauses WITH KEY l_ds_clauses-tablename
                             INTO l_ds_clauses.
DB-Zugriff
>>>>> SELECT (l_tab_fields-fields) FROM qmfe
INTO CORRESPONDING FIELDS OF TABLE qmfecat_tab
   WHERE qmnum = rqmqmel-qmnum
   AND kzloesch = space
   AND (l_ds_clauses-where_tab)
   ORDER BY PRIMARY KEY.
regard sinan
Edited by: eyup_sinan on Jan 6, 2012 3:21 PM
Edited by: eyup_sinan on Jan 6, 2012 3:30 PM

You seem to have made a copy of the standard program. You'll have to make sure that you are handling this field correctly in your code.
Rob

Message interface does not exist in any software components installed on th

Message interface does not exist in any software components installed on this business system.
hello,
When I check the interfaces on the business systems of 1 technical system, none of them have sender or receiver interfaces, hance I can't use them. The interfaces should ofcourse be on the Directory.
I have deleted the business systems and the technical system and created them again, but no result.
The product and software componets are in the technical sytem and business systems.
Any help would be usefull.
thanks,
Job

Hello!
If someone will search in the future for this error, here is the solution:
The error occurs if the GUID of the software component at the SLD is different to the one at the repository. Please compare the GUID at the SLD -> Administration -> Content Maintenance -> Dropdown "Component Version" -> Dropdown "Software Component Version". At the Integration Repository you select the Software Component Version at at the tab "Keys" you find the related GUID.
The error occured because the Software component has been created manually at the system. The repository content came from another system via import with own SLD (and because of that with another GUID for the software component).
Kind regards,
Klaus

List View webpart from subsite to Top site shows random error "List Does not exist"

Hi All,
We have a list in subsite and we are creating a view for that list which we are showing in one of the top site home page. We have taken care of changing the web and list guid of list view webpart when we added on top site. Its working fine but some time
shows error "list does not exist" but when we refresh the error goes. Is it known issue or if there is any workaround for this? because we cannot go live with this random error.
Rohit Pasrija

try these links:
http://mroffice365.com/2012/01/sharepoint-display-a-list-or-library-from-subsite-to-the-top-level-site/
http://sharepoint.stackexchange.com/questions/37140/display-list-or-library-on-another-site-as-webpart

Import javax.servlet.* gives error "package does not exist"

I am working through Monica Pawlan's book "Essentials of Java PL".
My PC runs Windows2000 prof. I have downloaded and installed j2sdk-1_3_1_01-win.exe in c:\jdk1.3.1_01
I have downloaded and installed tomcat4.0 (jakarta-tomcat-4.0.zip) into c:\jakarta-tomcat-4.0
CATALINA_HOME is set to c:\jakarta-tomcat-4.0 and CLASSPATH is set to .;C:\jakarta-tomcat-4.0\common\lib\servlet.jar
I can compile an applet starting:
import java.awt.Color;
import java.awt.BorderLayout;
import java.awt.event.*;
import javax.swing.*;
//Class Declaration
class SwingUI extends JFrame implements ActionListener { ... }
but trying to compile my servlet starting:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class ExampServlet extends HttpServlet { ... }
gives me the error (import javax.servlet.*) "package does not exist".
Any pointers on this immediate problem? and is my book out of date?
Many thanks,
James Towell

You downloaded the Java 2 SDK Standard Edition, but you need to also download the Enterprise Edition if you want to write programs that use enterprise features.

Error Infoobject does not exists in Infoprovider

Hi Friends,
I am getting "Error Infoobject does not exists in Infoprovider" in Quality. Actually Fiscal Period and Variant are not showing up in Query designer left panel (where we can see infoprovider structure). This problem is only in Quality, the query works fine in Development and training system.
Any thoughts why am I getting this and way to rectify it? I tried transporting the query again by collecting query elements. Still it gives same error.
Thanks and regards,
Balaraj

Probably your data provider has been changed and transported to quality and your query is still using those objects. Please check the info provider in both system if they are in sink or not.
Regards,
Kams

Full import error : "user does not exists"

Hi all,
I had 5 separated windows based servers (32bit) with oracle database 9i. I decided to centralize them into one server. So, I configured a new Linux (64bit) and install an Oracle 10gR2. Then I configured a starter database with dbca. I prepared a full dump file from one of old servers and successfully full imported it into starter database on new Linux (10g) server. After that I configured another database using dbca. But when I wanted to full import the previous dump file into new database I have got the error "user does not exists" regarding some demo schema and import terminated unsuccessfully.
I decided to create users regarding the errors and restart the import. After each user creation I was getting a new error for a new user account.
My main question is why first time import terminated successfully without any error but second one in new database raised error?
Thank
Iman
Edited by: Iman.Jam on Aug 25, 2009 9:38 AM

Hi yingkuan,
imp full=y file=.... log=..... userid=system/manager@orcl
ALTER SESSION SET CURRENT_USER = "HR"
ORA-.... : user does not exists
And I know that import will create users that are not exists. Actually, all my specified schema are created but not some of accounts
Regards,
Iman
Edited by: Iman.Jam on Aug 25, 2009 9:59 AM

Message interface does not exist in any software components

Hi masters,
I'm having problems with this message in my repository when I try to create an Interface determination with two interfaces mapping: "Message interface does not exist in any software components installed on this business system".
note: I have read all the posts about this problem but nothing has solved it.
I will describe more or less how is my SLD.
First all, my Technical System is an Web AS ABAP (non a third party).
I have created two receivers determination, with out problems, then, created the interface determination, with two Inbound interface, BUT, when I create a condition, the message appears, and the XPath doesn't shows the nodes for do the condition..
I have checked the GUID, and that's good.
NOTE: I have a second SWC but this is a third party... and when I test to do the same in this system, I have NO problems... so.. what is wrong with the Web As ABAP?
Regards and thanks

did you mean:
SLD -> Technical System->Technical System Type: WebAsAbap-> Installed Products->Add New Product and add my Software Component???
if is this, I have already done this, and still doesn't works.
Thanks

Message interface does not exist in any software components installed

"Message interface does not exist in any software components installed on this business system"
Essa é a mensagem de erro que estou tendo ao tentar configurar o XPath Receiver Determination do cenário SRVSC_WebAS_Outbound_ServiceStatusCheck.
Já notei que a mensagem dá porque o meu BS da NFe não está com o SWCV SAP SLL-NFE 1.0. Mas isso só no ID porque no SLD ele aparece. Não sei mais o que fazer pra ele aparecer no ID. Já eliminei o BS, executei um refresh do cache do SLD, depois executei um refresh full e nada! Quando eu crio o BS novamente, ele vem sem o SWCV SAP SLL-NFE 1.0.
Tive que configurar o XPath na mão para todas as SEFAZes!!!
Já li vários threads a respeito desse erro e executei vários procedimentos sugeridos, mas nada.
Alguém já possou por isso?!?

para ser mais preciso, verifique no payload de envio e recebimento da mensagem de verificacao de status do servico se estao correspondentes ao que estao abaixo, essa mensagem é de verificacao do SEFAZ de SP (35) para o ambiente de homologacao
(SENDER)
<?xml version="1.0" encoding="utf-8"?><n0:nfeStatusServicoNF xmlns:n0="http://sap.com/xi/NFE/005a" xmlns:prx="urn:sap.com:proxy:PID:/1SAI/TASE95D30ADB76F1544C2D5:700:2009/02/10" xmlns:n1="http://www.portalfiscal.inf.br/nfe"><n0:cUF>35</n0:cUF><n0:tpEmis>1</n0:tpEmis><n0:tpAmb>2</n0:tpAmb><n0:nfeCabecMsg><n1:cabecMsg versao="1.02"><n1:versaoDados>1.07</n1:versaoDados></n1:cabecMsg></n0:nfeCabecMsg><n0:nfeDadosMsg><n1:consStatServ versao="1.07"><n1:tpAmb>2</n1:tpAmb><n1:cUF>35</n1:cUF><n1:xServ>STATUS</n1:xServ></n1:consStatServ></n0:nfeDadosMsg></n0:nfeStatusServicoNF>
(RECEIVER)
<?xml version="1.0" encoding="UTF-8"?>
<nfeStatusServicoNFResponse xmlns="http://sap.com/xi/NFE/005a"><nfeStatusServicoNFResult><retConsStatServ xmlns="http://www.portalfiscal.inf.br/nfe" versao="1.07"><tpAmb>2</tpAmb><verAplic>SP_NFE_PL_005e</verAplic><cStat>107</cStat><xMotivo>Serviço em Operação</xMotivo><cUF>35</cUF><dhRecbto>2010-05-26T09:37:22</dhRecbto><tMed>1</tMed></retConsStatServ></nfeStatusServicoNFResult></nfeStatusServicoNFResponse>

Error: SNAP_ADT does not exist in the database - manual check required

Hello Friends,
We are performing an upgrade+migration to HDB using the DMO option(Oracle to HANA).
We are getting below error in the phase MAIN_SHDCRE/SUBMOD_SHDDBCLONE/DBCLONE!
Also find the output of SE11 & SE14 attached.
SE14->
Please help us with the manual check.
Regards
Sury

Hi Sury,
In regards to the error below:
1EETGCLN Error: SNAP_ADT does not exist in the database -> manual check
required
1EETGCLN SNAP_ADT
1EETGCLN Table does not exist
Could you please try to activate the following tables via SE11?
- SNAP_ADT
Once they are activated, Could you please repeat the phase and update the result?
Thanks and Regards,
James Wong
Follow us:
SAP System Upgrade & Update Troubleshooting Wiki Space.
SAP Product Support Twitter ( Hashtag: #NWUPGRADE)

The VersionEntity table does not exist in the LiveCycle database. Please bootstrap LiveCycle db

I am using Livecycle 8.2 running on JBOSS. I get this error in server log
2013-07-25 13:48:33,809 ERROR [com.adobe.idp.config.AdobePreferenceFactory] UserM:GENERIC_ERROR: [Thread Hashcode: 5001776] Problem with system root| [com.adobe.idp.storeprovider.jdbc.DBStoreFactory] errorCode:12293 errorCodeHEX:0x3005 message:The VersionEntity table does not exist in the LiveCycle database. Please bootstrap LiveCycle database.
2013-07-25 13:48:33,809 INFO [STDOUT] java.lang.RuntimeException: The VersionEntity table does not exist in the LiveCycle database. Please bootstrap LiveCycle database.null
Also not able to login using Administrator password. Assuming above error is the cause. Please any help is appreciated. Thnks.

Is this observed on a running server or have you made any changes to LC server or database after which this error is seen?
--Santosh

TimeZone.getDefault().getID() does not exist in your Oracle database table V$TIMEZONE_NAMES???

Hi Everyone,
My Jdev version is 11.1.2.3.0.
I have developed many ADF applications in this version itself by setting time zone as -Duser.timezone="+05:30" and all were running fine.
But Jdeveloper got crashed so i reinstalled the same version but now none of the applications are running.
Its showing error as below:
oracle.jbo.JboException: JBO-29112: The time zone 'GMT+05:30' defined in adf-config.xml or TimeZone.getDefault().getID() does not exist in your Oracle database table V$TIMEZONE_NAMES. Please set an available time zone in your TZ environment variable or user.timezone Java system property.
What to do now?
how will i know wat time zone should be set?
please help the needful...
Thanks.

Check if www.jobinesh.com/2010/12/why-do-i-get-oraclejbojboexception-jbo.html helps.
Timo

Dunning error (form does not exist)

Hi,
While performing the dunning after selection the Individual dunning notice for printout the system shwoing error that '''FORM F150_DUNN_01''' DOES NOT EXISTS.
When I tried several times to performance the dunning it showing the same error message as above said.
Can any one let me know why does this happening. please give your valuable solution regarging on the above said issue.
Thanks in Advance.
Regards,
Suresh

Hi
In Dunning Procedure --- FBMP
you will select new entries and give Dunning procedure , name , dunning intervals in days , No. of dunning levels , line item grace periods , interest indicator , select standard transaction dunning checkbox , reference dunning procedure for texts(dunning procedure) and save.
select Dunning texts button and give company code and select customer radio button and enter.
select new company code button and give company code and enter.
select seperate notice per dunning level checkbox
Deselect Dunning by Dunning Area checkbox and save.
select back arrow and select yes for the message to save the data.
select dunning texts button once again , give company code , select customer and enter.
Dunning level (1) Form (F150_DUNN_01)
Dunning level (2) Form (F150_DUNN_01)
Dunning level (3) Form (F150_DUNN_02)
Dunning level (4) Form (F150_DUNN_02)
select dunning levels button and under print parameters , select Always Dun CheckBox's.
select charges button , give currency and enter.
select back arrow and save
Assign the Dunning procedure in Customer Master.
Check with the Dunning Procedure you had created.
Regards
Venkat

Dunning Print Error: F150_DUNN_01 does not exist

Hi,
I have assigned F150_DUNN_01 via FBMP T-code for Dunning texts. While performing the Dunning print I am getting an error "Text object does not exist" or F150_DUNN_01" does not exist.
The Event settings via T-code BF31 for event 1720 is "FI_PRINT_DUNNING_NOTICE_PDF"
Any suggestion will be highly appreciated
Thank you
Vignesh

Hi Eli,
Form F150_DUNN_01 is a SAP script form and not Smartform.
I am able to print preview the form text via se71 by print testing. So I do not think we need to reimport it. Can you identify any other reason for the error
Thanks
Vignesh

OSA error 'SOCAT does not exist in any attached database'

Similar Messages

Maybe you are looking for