OSS note is not working in production but works correctly in test system .

hello friends ,
weh have implemented one OSS notes , which is working corectly in Test system , but not working in production .
Could you please let me know , what could be the reason ?
OSS note no 1064273-
Regards,
Manoj

Pls. check with Basis if the OSS note has been implemented properly and successfully.

Similar Messages

  • People picker is not working for ie11 but working fine for other lower version

    i am using sharepoint 2010 and windows authentication
    recently i have updated my ie to ie11 and problem goes here.
    when i try to select from people picker, there are an unexpected error happened 
    however when i use other ie version, people picker work fine, what goes wrong?
    i have already added my system as trusted site
    if there any others thing i miss out?

    Hi,
    According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
    IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
    first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
    add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
    add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
    You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • My keyboard is not working in "Pages" but works with all other applications.  Please provide resolution advice.

    My keyboard is not working in "Pages" but works with all other applications.  Please provide resolution advice.

    What version of Pages?
    There are one or two of us here who are not intimately acquainted with your particular set-up.
    Peter

  • Motion tracking is not working for videos but works for images?

    Motion tracking is not working for videos but works for images. When the videos is drop onto the tracking object the videos corner don't appear highlighted. I am working on windows 7 with version 13.1.

    ivanhoeeurope
    Are you within 30 days of purchase for the Premiere Elements 13? And, did you purchase as a download from Adobe? If so, you can
    apply for a return/refund for 13. If you purchased elsewhere, then you would be governed by the return/refund policy of the seller.
    Adobe no longer sells version 12, so you would have to find a vendor who still has it in stock and purchase it. There is no way to "downgrade"
    13 to 12.
    What you may want to do is to download and install the Premiere Elements 12 tryout from the following web site to verify that 12 Motion
    Tracking works for you; whereas 13 cannot with regard to use of video for the Motion Tracking source media.
    Adobe Photoshop Elements 12 Direct Download Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
    Apparently this web site does not sell the tryout. It just makes it available for use.
    Before I posted my reply to you I looked at Motion Tracking with video source media on both Premiere Elements 12/12.1 and 13/13.1 on the same Windows 7 64 bit computer.
    If any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • I am running Lion on both my Macbook Pro and iMac.  Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro.  Help please.

    I am running Lion on both my Macbook Pro and iMac.  Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro.  Help please.

    Check for updates by running MS Office Update directly from:
    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
    (Open Finder, ⇧⌘G, paste in the above and click)

  • The "new" hotmail no longer works with safari, but works with firefox. Hmm.

    The "new" hotmail no longer works with safari, but works with firefox. Hmm. i find this very convenient being a microsoft product. anybody else wonder why this new version happens to not be safari compatible? does anybody know if it works on the PC version of safari? if not, i find this to be a blatant move on microsofts part to bias the safari browser (especially since its basicly new on the window platform). forcing safari/hotmail users to "have" to use another browser to access their hotmail accounts.

    I have been successfully using Hotmail and Gmail with Safari for a long time. For roughly the past month, that relationship is rocky at best. At times, one of the following actions suddenly opens Hotmail, but it is a short-lived solution:
    (a) Hotmail directly
    (b) Hotmail Home>Hotmail
    (c) Sign up to Windows Hotmail
    (d) Deletion of prescribed cookies, resetting, etc. - made no difference
    Both Firefox and Opera work fine with Hotmail - especially Opera is very fast.
    In addition, Safari and Gmail does not work with Attachments, but otherwise Gmail is OK.
    I suspect I have to wait for a Safari fix because in my case I do not wish to abandon Hotmail, and Safari is a given. I would think that Safari would want to stay competitive with the two biggies, Hotmail and Gmail, which must have large numbers of users.
    I certainly would appreciate any other suggested fixes.

  • LoadSound not working in IE but works in Firefox??! Help!

    Greetings all,
    I've posted this in the general forum with no luck, so I
    thought I'd try here.
    Situation:
    A simple flash movie, using a loadSound method, works
    correctly in FireFox/Safari in our production environment, but IE
    will NOT play any sound.
    All browsers work just fine in our staging environment,
    suggesting a difference between these two systems.
    When loading the movie in IE, the progress bar jumps from 0%
    to 100%, which suggests it's found the file, but will never play
    it. In FF/Safari, the progress bar fills up gradually, as expected.
    I've tried adding the mp3 mime type to our Apache
    configuration (AddType audio/mpeg .mp3), which didn't seem to have
    an effect. Linking to the mp3 file in different ways--literal vs.
    relative--doesn't seem to have an effect.
    This bug is holding back a pretty major new site component,
    if anyone has ANY ideas, please let me know!!
    Matthew

    "OctavianMH" <[email protected]> wrote in
    message news:e1oprn$2cr$[email protected]..
    > Sorry, perhaps i was unclear. The servlet is outputting
    an XML feed, that
    > contains the PATH to the mp3 file.
    >
    >
    http://www.carnegiehall.org/AudioInfoServlet?event_id=3328
    >
    > The flash music player uses XMLConnector and DataSet
    components to grab the
    > XML from the servlet feed, and then populates the
    loadSound() call from that
    > data. Not that it matters, if this:
    >
    >
    http://www.carnegiehall.org/flash/sound_module_empty.swf
    >
    > won't work under IE, which doesn't have any of the
    component/xml complexity,
    > and simply tries to load the sound, then the read sound
    module certainly won't
    > work.
    >
    > The key is getting sound_module_empty.swf to work, if I
    can get it to work in
    > IE, I imagine the real thing will work too.
    >
    > Oi vey.
    >
    > The actual mp3 file is at
    http://www.carnegiehall.org/media/2006S0108M.mp3
    OK, yeah, I remember now. I looked at that before.
    I put your files on my server in the same folder arrangement
    that you have for a test..
    I only changed the code for the sound_module_empty.swf to
    point to my server like this:
    stop();
    s = new Sound();
    s.loadSound("
    http://www.kompanionkare.net/media/2006S0108M.mp3",
    true);
    It loads up and works fine from my server so it must be a
    server problem.
    http://www.kompanionkare.net/flash/sound_module_empty.html
    (I will delete the Files soon, just leaving up long enough
    for you to test)
    tralfaz

  • F4 help Not Working in Portal but working in RSRT and BEx

    Hi All,
    We have a report in which a customized infoobject is used as one of the selection criteria. This field is a navigational attribute of main infoobject. There are other two navigational attributes of this infoobjects as well in the selection critera.
    When we run the report using portal and click on F4 for this variable, it is not reading master data whereas it is working fine if we are using RSRT or BEx.
    The other two variables are working fine in the portal as well.
    Please help us incase if you have encountered such problem.
    Thanks,
    Dinesh

    Hi Imran,
    thanks for the reply.
    I will explain the problem in detail
    We  have a query Q1 and its web template WT_Q1. We have the infoobjects a, b, c and d. the infoobjects b,c and d are the navigational attributes of the infoobject a. We have a cube C01 where all of these infoobjects are used.
    All the Infobjects are the selection variables in the Query Q1 which are actually the navigational attributes.
    When we F4 on c or d, it is picking up the master data and displaying it iin portal as well as BEx or RSRT.
    But the F4 on "B", it is not displaying in portal whereas in BEX or RSRT we are able to get the master data values.
    On further analysis, i have found that it is not hitting the specific SQL code from where the master data objects are read.
    Hope this is clear.
    Thanks,
    Dinesh

  • Wireless not working in linux, but works fine in windows vista

    Hello!
    I have installed Unbreakable Enterprise Linux 4 in a dual boot config. with Window Vista on a Compaq Presario laptop. After install completed I found that my on board Broadcom Wireless Adapter (Dell 1390 Mini PC card) was not recognized. I have tried installing NDISwrapper versions 1.48 and later 1.47 (after uninstalling 1.48) because everytime I got to the "modprobe ndiswrapper" received a fatal error about an unknown symbol or parameter, and on install I also encountered a "CONFIG_4KSTACKS" error as well. The good part is the light on my laptop for the wireless adapter finally came on and the driver (bcmwl5.inf) appears to be installed and the wireless adapter identified as being present, but it still doesn't show up in the network manager gui interface. So I am out of ideas if any one can give me a suggestion for a solution I would appreciate it.

    Hi there,,,,,
    I have Oracle Enterprise Linux 5 installed and Intel wifi 5100 card installed on my laptop. Wireless card does not work in Linux it works fine with Vista, I have dual boot. I have downloaded and installed the microcode for the wireless card for Linux,,,it is now active but it does not take ip address from dhcp and nor does it connect when i supply manual ip. it does not even scan for any wireless network. I have WEP enabled on my wireless network. It just says disconnected.....
    Please help me.....i have been trying to get this thing work for 3 weeks.
    thanks.

  • IChat screen sharing and video not working on MacBook but works on Mac pro

    I have a MacBook and MacBook pro. Both have the lion os 10.7.2. I can use iChat on the MacBook pro for screen sharing, video chat, and text chatting, with others remote to me. However, I can only do texting with the MacBook.  I can do screen sharing via Finder between my MacBook and MacBook pro. I can do FaceTime between both systems. I can also do FaceTime between the MacBook and anyone remotely.
    I also tried installing teamviewer on the MacBook, and on a remote MacBook..... And I get the same results where I cannot share the screen, from the one that has not been working.
    I have checked the settings under system preference and made sure screen sharing was enabled. I have checked under iChat under video to make sure screen sharing was checked.
    The macbook that is having this problem is configured for AIM for iChat
    I have run out of ideas. Any suggestions on what I might try?
    Thanks

    Ok,
    I will list the ports in greater detail and point out when iChat uses them.
    AIM Login and 1-1 Text Chatting
    iChat version 1  through 5 will Log in to the AIM server on port 5190 (TCP Protocol) by default.
    Since iChat 2 we have been posting here that the AIM servers allow a Login on almost any port and have been suggesting port 443.
    This is used by both Web Browsers for secure Login to some sites and by the Mail app with some mail servers.
    It is also below port 1024  (most domestic routers have the ports above this figure closed)  In some campus situations using port 443 will normally allow at least Login and Text chatting.
    iChat 6 uses port 443 by default.
    File Transfers (AIM)
    When doing File Transfers with AIM Buddies iChat will move to using Port 5190 on the UDP Protocol.
    This cannot be changed.  (This invokes the little Message about Starting Direct IM in an open Chat)
    It also uses this port for Pics-in-chats, dropping Files on a Buddy's name with out a Chat or sending other files that are not pics.
    In the case of Port Forwarding some devices don't like port 5190 being forwarded "twice" which is another reason for moving the login and Text chat port.
    Jabber Logins
    No matter what Jabber server you use ichat will use one of two ports (5222 and 5223)
    Which one it uses is dependent on whether it needs and is using an SSL Login or not.
    SSL Logins use port 5223 and NON SSL one use 5222 (ticking or Unticking the SSL box on a Jabber account will automatically change the port).
    Google Talk is the exception in that it allow a Login on port 443 as well.
    The First Apple Doc I linked you to says iChat uses port 5220 in Jabber.
    I run Little Snitch and have never seen any version of iChat use this port at any time.
    Bonjour
    Any Mac to Mac Connection or Mac to any Bonjour able peripheral will be on port 5353.
    This is normally opened (Preset) in the Mac Firewall for the Finder/System side of Sharing.
    iChat needs and uses two other ports  (5297 UDP and 5298 on both TCP and UDP)
    As they an LAN Side connections the router would normally pass them.
    At iChat 3 there were issues with the Mac Firewall (it included UDP set up and the preset in the firewall only listed them and TCP so we had people add all the iChat ports  (you had to manually enter them in Tiger)
    A/V Chats
    No matter which Buddy List you start from iChat will do A/V chats the same way.
    The Visible Invite you or your Buddy sends is on port 5678 (UDP)
    In iChat 3 and earlier iChat then moves to port 5060 to send the SIP Connection Process invite behind the scenes  (SIP = Session Initiation Protocol)
    Port 5060 is one of 4 ports internationally agreed for SIP (How VoIP phones connect) (5060-5063).
    Although ISPs were not supposed to block Through traffic many started blocking End users  and then Charging them to open these ports (Many ISP were telecom companies that were losing long distant Telephone calls monies).
    The SIP process then in iChat 3 contacts a server run by Apple for this purpose (Snatmap.mac.com to give it it's full name).
    This acts like a old fashioned telephone operator connecting the call.
    SIP is a text based process.
    Your end "Calls" the operator.
    The Operator "Calls" Buddy.
    Buddy Accepts
    iChat then negotiates the ports to be used.
    In iChat 2 and 3 it uses 4 ports (vid in Vid out, Audio In and Audio Out) from "the group of 20" starting at the bottom (16384 to 16387 normally)
    Three and 4 way chats uses more ports (which is why 20 are set aside)
    In iChat 4 Apple realised the issue with the 5060 port and changed the way iChat worked
    Since then it has Sent the invite on Port 5678 but then moved to port 16402 (it starts at the top of a smaller group of 20)
    All Video and Audio traffic is also now on one port  (so no need for 20 ports and iChat now lists 10).
    NOTES so Far.
    File Sharing during a Chat converts the Chat to Direct IM for AIM Logins
    This is Peer-to-Peer in AIM
    A/V Chats are Peer-To-Peer and you can actually log out of the Buddy list and continue the chat. (The exception is using iChat 6's  AIM Video relay option)
    Screen Sharing
    Screen Sharing is an Audio Chat with a VNC connection along side.
    Both bits have to wok to avoid the Pop-up to send to Apple and the Log that contains.
    The Audio part is on port 16402 and the VNC part is random. (So random it is different every time you do it)
    The reason it is classed as an Audio Chat+ is so the AppleScript for Auto Accept can  filter out Screen Sharing connection and Not Auto Accept them.
    This does have a knock on effect as far as your Router is concerned as already mentioned earlier.
    You cannot Forward or Trigger the random Port so you have to use UPnP in your router to open the ports.
    NOTES
    Jabber File sharing may possibly be on port 1080 as listed in the Server Article I linked you to (I have also seen it written about in other stuff I have come across)
    However Little Snitch does not seem to confirm this either.
    Most time it will be peer-to-peer like the AIM connections for this.
    However some Jabber servers do not seem to allow this and have this Jabber65 Proxy set up which passes things Server to Server in between it leaving your end and arriving at a Buddy.
    This on  Port 7777 but you do not need to open this port (unless you are running a Jabber server)
    I have yet to test File Transfers using a Yahoo Buddy List in iChat 6.
    AppleCare and Geniuses.
    Previously I have been contacted by Geniuses in Stores asking to test customer's iChat.
    They and the Applecare people have details about Apple wants an designed the App to work.
    What they don't have is the knowledge about what it takes to set it up in the "real world".
    There are literally thousands of Makes and Models of routers.
    Some like the Thomson-Alcatel brand state they are SIP/VoIP ready but this means the router strips out all SIP Data trying to send it to a Phone.
    Early models of Alcatels can get around this with a tweak. Later models can't.
    Motorola devices tend not to have UPnP.
    Apple Base Stations have Port Mapping Protocol instead of UPnP and this needs setting up.
    The Zyxel range definitely does not like the dual use of port 5190 and does much better using UPnP (You almost certainly have to do your AIM login on port 443 with these).
    1. I have two computers (MacPro and MacBook Pro) that are both running Lion 10.7.2 and both running iChat 6.0.1.  <<-- Fine
    2. The Netgear router model is: WNDR3700.    <<<<---  With any Brand there are exceptions and I do wonder about this one
    3. The firewall for both Macs is turned on and in the advanced area iChat is listed as being "allowed."  <<<<---- Fine
    4. In iChat, under the video options, "Screen Sharing Allowed" is checked.                                        <<<<<---- Fine
    5. In System Preferences, "Screen Sharing" is checked and this is for "All Users" at present.               <<<<<---- Not Required
    6. There are two separate AIM accounts being used for iChat purposes.                                            <<<<<----  OK
    7. In iChat preferences, each AIM account is "Enabled" under "Account Information" and the "Server Settings" show the Server as "api.oscar.aol.com" and the Port is "443" and "Use SSL" is checked.                                <<<<---- As it should be
    From this and the other info in the first port it was only the router set up that seem to throw some light on a possible cause (Port Forwarding and UPnP conflict)
    If just doing Port Forwarding the ports listed would have covered things (Except the Screen Sharing's random port)
    Regarding your latest post.
    I have  table similar to that on my Sagem 2504Fast Modem/router combined device and it too seems to list a different port on the external side on occasions.
    I would try the router with the Disable SIP ALG unticked (so it is not disabled). If the Help info on the right gives any info about what this Netgear version does it would be helpful.
    Some are like the Thomson-Alcatels I was talking about in that it points the SIP data to a specific place (Possibly a Phone socket on the device)
    Others seem to provide an "boost"  to enable SIP to work and don't seem to get in the way of iChat.
    Try adding the Names in Table 1 from this page and see if you can Video to those.
    There are 6 names in total (I am actually only seeing one on Line as I type)
    9:19 PM      Wednesday; January 25, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Videos will not work in Firefox but work fine in windows explorer. why?

    I tried to verify my plug-in's and all are enabled. I found where was suggested to remove and reinstall Firefox but that did not fix problem either. I tried to change viewer for videos but still no luck. Not certain why Quicktime doesn't work. Note, videos when browsing will not open but everything else works fine. Videos work fine with windows Explorer, but not Firefox.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Top Nav buttons not working after publish, but works in app. WHY?

    I have tried to find out why these buttons will not work after publishing. They work fine while in the iWeb app, but not when publishing. I do not have any objects near the top nav buttons. The first site went off without a hitch
    <www.serenitycustompools.net> the second site began the problem with the last page, the nav buttons would not work. Now this 3rd site, none of the nav buttons at top will work after publish, but will work in app. Anyone else having the same probs? None of my pages have the same names or any punctuation marks, and they are simple one word named pages.
    mini intel   Mac OS X (10.4.9)  

    They all work for me, try clearing your browser cache or using another browser.

  • @font-face not working in FF, but working elsewhere.

    Hey, I've been trying to get @font-face working in Firefox, but it just won't work. I'm hosting the font externally and the way I'm doing it works on other browsers. This is my code:
    <body bgcolor="CA2E28" style="margin-left: 0px; margin-right: 0px;">
    <style type="text/css" media="screen, print">
    @font-face {
    font-family: "Blackout";
    src: url(woff link is here, don't want to put it here though.);
    body { font-family: "Blackout" }
    </style>
    <center>THIS SHOULD BE BLACKOUT.</center>
    </body>

    ''jscher2000 [[#answer-709096|said]]''
    <blockquote>
    Can you check to see whether Firefox is downloading the file? To do that, first open the Web Console in the lower part of the tab below your page using either:
    * Ctrl+Shift+k
    * "3-bar" menu button > Developer > Web Console
    * (menu bar) Tools > Web Developer > Web Console
    Click the "Network" button/tab along the top of the console and reload the page. Here you can see whether Firefox is requesting the file and, if so, whether it is retrieved.
    If that checks out, then click the Console tab and reload the page and watch for any error messages that might relate to the font. Anything strange?
    If the font is downloading and there are no error messages, use the Inspector tab to look at the body element and see whether the style is there and is being given effect (i.e., no line-through).
    If all that is good, you might double-check your personal settings to make sure you aren't overriding website fonts. Either:
    * "3-bar" menu button (or Edit menu) > Preferences > Content
    Click the Advanced button and make sure you have a checkmark for "Allow pages to choose their own fonts".
    If all of that is good, then... it's a mystery. Have you checked Firefox on other machines or other operating systems?
    ''For reference:'' https://developer.mozilla.org/docs/Web/CSS/@font-face
    </blockquote>
    This message came upon refreshing:
    Cross-Origin Request Blocked: The Same Origin Policy disallows reading the remote resource at <my font like here>. This can be fixed by moving the resource to the same domain or enabling CORS. Blackout_Midnight-webfont.woff
    And this one soon after:
    downloadable font: download failed (font-family: "Blackout" style:normal weight:normal stretch:normal src index:0): bad URI or cross-site access not allowed
    source: <my font link here>

  • Select query not working in Dev but working in QA and PRD

    Hi All,
    I have a select query with inner join which is not working in the DEV but working in QA and PRD. Anyone has any idea why is it happening, I think it to be a basis issue. Just want to confirm if anyone has any other idea.
    Thanks in advance,
    Barjinder Singh.

    Hi Barjinder Singh,
    In development you can't find the records for the table.
    In testing system only you can test even the program(report).
    If it is the DEV system you can't get the data.
    Go and see into the table wether it has records or not(in DEV system).
    It doesn't has the records in DEV system.
    Regards,
    Balakrishna.N

  • Macbook Pro speakers not working in OS but work in Bootcamp ?

    Had macbook pro for over a year so warranty is expired, i had spilled a drink on the laptop and thought that the speakers were lost for ever. But when i set up bootcamp with windows 8 the speakers now worked perfectly, this means that the speakers do still work and hopefully someone can give me some instructions on how to salvage them and get them working on OS !
    Sadly i've tried resetting the Nvram (Pram) and the SMC with no change to the speakers in OS, I would like to still have the speakers functioning in OS even though they work in bootcamp and if anyones got any tips or suggestions, please help !
    Frank

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Back up all data before making any changes.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
    3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
    4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
    7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
    9. If you have a MacBook Air, turn off Bluetooth and restart.
    10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    11. Reset the NVRAM.
    12. Reset the SMC.
    13. Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/Audio
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in theSound preference pane.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    14. Reinstall OS X after backing up all data.
    15. Make a "Genius" appointment at an Apple Store.

Maybe you are looking for