OT: TITLE for a PDF Page

In generating a dynamic PDF, is it possible to set what would
otherwise be
on an HTML page the page TITLE or will the URL always display
in a browser?
TIA
Cosmo

If you control-click (or right click if you have a two button mouse) a contextual menu will appear where you can zoom in and out.

Similar Messages

  • No Title for Main web page?

    Whenever I got to my site www.themchughfamily.net I get this odd question mark in the tab in safari and the browser history states that there is no title for the opening page. Any clue what I am doing wrong here? Thanks for the help in advance

    Hi,
    if you mean the welcome page
    http://www.themchughfamily.net/McHughFamily/Welcome.html
    I see "the mchugh family" as a title...
    However try to Empty Cache in Safari (Open Safari, in the upper menu bar click on 'Safari' and then 'Empty Cache') reload the page and I guess title will show up.
    Well... I now think you didn't mean the Welcome page... And visiting my site there's also a (no title) displayed. That's because the first page is just a redirect to the welcome page. Created automatically by iWeb. You have no control about the title of the redirect page in iWeb itself so you couldn't change the title and you're not doing anything wrong.
    What you could do if you want to change it is edit the source code of the redirect page post-publishing. Opening it with an html editor. However as it is only a redirect people don't even notice that page when visiting your site 'cause they don't even no they are "looking at it" for milliseconds... So is worth of modifying it? (you would have to repeat edit every time you publish all to .Mac or every time you publish to folder)
    Ps: the code for title you would have to put in the page in the html editor post-publishing would be <title>YourTitle</title>
    After publishing go to the iDisk/Web/Sites folder and locate your site's folder. In it will be an html file for the page you want to add the code. Open it with a text editor, TextWrangler is a free application that is very good at html editing (by +Old Toad+ on another thread)
    Regards,
    Cédric

  • Change the Page Title for all the pages when viewing the Reports in Bi Publisher

    Hello ,
    I have a requirement for changing the Page Title for all the report displayed pages on the browser window.

    As far as I know, answer is NO.
    it's very simple answer  Manikandan-S-Oracle
    for 1210326 's requirements there are some places for changes of property "title" and in some pages "title" can be different
    "one place or option for changing" does not exist imho ( may be i'm wrong )
    so you can change places for your needs but not sure what it's adequate
    as example
    ...wls\user_projects\applications\bipdomain\xmlpserver\catalog\navigator.jsp  -->  find <title>
    it changes title in http://somehost:7001/xmlpserver/servlet/catalog
    ... wls\user_projects\applications\bipdomain\xmlpserver\home\home.jsp  -->  find <title>
    it changes title in http://somehost:7001/xmlpserver/servlet/home

  • Creating a gif Title for a Web Page

    http://www.coachinginroads.com/dev/public_html/index3.html
    I am trying to create a slide show where the image changes behind the title "Coaching Inroads." The title needs to stay stationary, which is why I thought a transparent gif would work. The embedded image that appears in the center of image is the look I want, but am unable to create that same look in PS, as the sample that is off-center shows. The drop shadow seems to be the problem.
    I had made the title in AI & imported it - w/ drop shadow - into PS. Is there a better way to do this? Or what am I missing in the Save for Web dialog in PS?
    Thanks, -BArry

    Save as PNG-24, not GIF.

  • Saving Adobe PDF Page Size without Admin Rights?

    Ok to get started, to define the limits of my environment for replication:
    I'm using Windows XP SP3 and have tried Adobe Acrobat 8, 9, and X, my computer is on a network at work, and my user rights are limited.
    Open Printing Preferences, Click Add...
    The "Add Custom Paper Size" window appears, give a new name and define sizes of the paper.
    Lets say I'm printing to a large format say 36" Tall by 108" Long (3ft x 9ft)
    Click Add/Modify, the window goes away, focus again on Adobe PDF Printing Preferences. Click the drop down box for Adobe PDF Page Size:
    The page size I just added to the list is not there!
    The solution to the this problem is to have Administrative Rights to your machine in order to add custom paper sizes.
    Note to Adobe Acrobat Programmers/Designers: please redevelop this feature to allow users to add paper sizes without Power User or Admin Rights. In a secure network these rights are not easily given out to every Dick and Jane that uses your software.

    Interesting post, and for once, something one should be able
    to work with.
    I have a similar problem:
    We're using a software distribution tool to install
    msi-packages via rpc. Trying to distribute the latest flashplayer
    works fine, but the users can't open flash-files, whether with
    firefox nor internetexplorer tried 6 and 7 with latest patches.
    I've found two possible ways to install a flashplayer plugin,
    but both require manual input, which is just not possible for
    >100 Clients. just to mention: clean registry and then install
    with admin rights or just run the installer with admin rights from
    the local machine.
    Another problem is, that our company security policy
    prohibits from using admin-rights for most installations.
    is there any workaround?
    regards
    Matthias Hilpert
    ps: /sticky or at least a FAQ :-)

  • Render PDF Pages As Images - File names are gibberish

    I have a workflow that takes a folder of PDF's and converts them to JPG's.
    The problem is that Automator is giving the converted files random gibberish filenames such as Kft56Fvg.jpeg and not the names of the original files.
    Anyone know what's going on?

    At the bottom of the list of actions in Automator is an area with the description of the selected action in the listing (but not the workflow). If this description isn't visible, there is a button at the bottom of the window near the bottom left corner of the window for revealing the description.
    If you need to see the description of an action that is in the workflow on the right side of the window, there is a button on the action itself at its bottom left that will reveal the description of the action. This is so you won't have to find it again in the listing just to review its description.
    For you're immediate convenience and peace of mind, this is the description you'll find for "Render PDF Pages as Images":
    ---- Begin description ----
    This action will render each page of the passed PDF files as images.
    Note: As the names of the resulting images are randomly generated, this action is often followed by the Rename Finder Items > Make Sequential action.
    Input: PDF files
    Options: Image format, color model, resolution, and compression
    Result: (Image files) References to the rendered image files.
    ---- End description ----
    Since a PDF can contain many pages, this action could produce many images from the same PDF. So, that could further complicate naming the new images when multiple PDFs are involved if you need special names.

  • Best way to view PDF page(s) with in a custom program

    What is the best approach for viewing PDF page(s) in a custom program?  I know you can hook in Adobe PDF Viewer, but I need access to mouse clicks and location on the page.  As well, I need to control the scale and zooming of the PDF page(s).
    I'm not looking to change the PDF file, but rather draw over top of the page(s).
    Thanks for any help or pointing me in the right direction,
    Shayne

    Actually, Ive already implemented an interface after throughly reading all the Acrobat documentation on Javascript within the PDFs. Its functional but not spectacular. It simply uses the setField function to get and set the values to the Field objects. It do this by posting messages to and from the web page that is hosting the PDF object.
    I was wondering if there is a better way. It needs to stay a thin-client interface - nothing besides PDF Reader loaded on the workstations. I am currently investigating the several other methods but was hoping for some guidance.

  • Search rollover page number not consistent with thumb and pdf page number

    Please respond by e-mail to
    [email protected]
    Adobe Reader 9.0 and 8.1.2.
    Mac OS X 10.4.11
    Mac PowerPC G4
    640 MB SDRAM
    Does Adobe Reader have a search window phrase rollover, yellow-highlighted pop up page number bug displaying the wrong page in some circumstances?
    If Yes, how do I report that bug to get Adobe to fix it?
    Viewing the same PDF:
    MacPreview does not have the problem described below,
    Adobe Reader does have the problem.
    Adobe Reader, search phrase rollover, pops up a page number that is yellow-highlighted, e.g., p# 29, and is wrong, whereas the page number for the thumb and PDF are both the same and are correct.
    My PDF has been set on Acrobat Pro to properly paginate the first eight pages in lowercase Roman numerals (i, ii, iii, iv, v, vi, vii, viii) followed by Arabic numerals (1, 2, etc.). My PDF uses an AcrobatPro special setting to properly handle this pagination scheme. The search phrase rollover pops up a yellow-highlighted page number that wrongly adds 8 pages to the page number for the thumb and for the PDF page. Suspiciously, we have 8 pages with lowercase Roman numbers. Remember, viewing the same PDF, MacPreview works perfectly, producing identical and correct page numbers for the phrase, thumb, and PDF.

    the method u followed is fine as need a page number staring from a specify value which u input.
    @section is only for resetting page number to 1 for every group and for that pdf and ppt will be fine but only for rtf u need to use that ( pressing F9).
    u can use @section and initial page number combined but they give u same output as get now. rtf output wont support it will only reset 1 every time
    What ever u do rtf output wont support initial page number code ..........
    i mentioned that F9 work around to mention that it is the only work around u have upto now to control rtf output with regards to page number.
    Guru's correct me if i am wrong. wait for a day or two if some one from guru's confirm it .
    If u need real confirmation raise an SR oracle will let u know .

  • Title on all my pages

    Hi,
    I want the same title for all my pages.
    Right now I go into each page and type in the following under html header and body attribute.
    Edu-Met Interactive Systems
    Is there anyway we can put this on Page 0 (if so how can it be done), so that I dont have to do this every time I create a new page?
    I am running apex 4.0
    Thanks
    Munish
    Edited by: Munish on May 2, 2011 12:36 PM
    Edited by: Munish on May 2, 2011 12:37 PM
    Edited by: Munish on May 2, 2011 12:37 PM

    There's a theme 17 CSS rule:
    #logo {
        display: block;
        position: absolute;
        top: 16px;
        left: 10px;
    }This generates an absolutely positioned box for the logo element. The dimensions of the box are the dimensions of the element. The text <em>is</em> centered within this box.
    Get a proper web browser&mdash;none of this Internet Explorer rubbish&mdash;with a web inspector tool: Safari, Chrome, or Firefox+Firebug. Invoking the inspector on the elements you're interested in will reveal the CSS rules applied to them, the style sheets specifying these rules, and how the cascade determines which rules are in effect.

  • HT5557 Is it possible to display the title of the book or PDF when viewing them in the library? I can only see a title if my PDF's first page contains the title.

    I would like to be able to display the title of the PDF or book while in library mode. In iTunes, you can click and hold on the song to get the full title information. I would like to see the same feature in iBooks if it doesn't already exist.

    You can omit the title altogether in the URL (together with the succeeding slash, of course). For example, my own podcast URL in the Store is
    https://itunes.apple.com/gb/podcast/the-sound-of-78s/id166389425?mt=2
    but this works perfectly well:
    https://itunes.apple.com/podcast/id166389425
    Indeed you can even put your own title:
    https://itunes.apple.com/podcast/any_old_title/id166389425
    So it's as simple as that!

  • Safari 7.0.6, using Adobe Acrobat 11.0.10, aren't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Safari 7.0.6, using Adobe Acrobat 11.0.10, isn't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Figured it out.  It had nothing to do with the software levels of Safari or Adobe Acrobat.  Here's the fix:
    Open Finder/Applications
    Search "Internet Plug-Ins"
    Move any Adobe plug-ins to the trash
    Quit Safari
    Launch Safari
    Your pdf document should now render in Print Preview and print properly.

  • Reader 9.3.2 does not remember last page visited for scanned pdfs

    Using an old school PPC Mac, OSX 10.4.11.  Reader 9.3.2 does not remember last page visited for scanned pdfs. It only remembers the last page visited for searchable pdfs, but not for scanned.  I have the box checked in "Preferences: Restore last view settings..."  I cannot upgrade Reader on this system, or my OS, so I'm stuck using what I have for now. I have to read huge documents for my work, that will include hand written notes in the margin and other marks on the page. The documents are hundreds of pages long, so it's a bit frustrating that it can't remember the page number for this type.
    Are there any fixes for this? Something else I can try?

    I tried to find the download for 9.5.5, but my OS is not in the list. I'm on a non-intel PPC mac. I tried finding that version on the web, but most of the links lead me back to Adobe, where it doesn't seem to want to be found. It obviously exists somewhere, but Adobe isn't making it easy to access!

  • I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud

    I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud option in Acrobat. Kindly help me to sortout this problems?

    So I tried generating the same PDFs on two other computers that have Acrobat 9 Pro.  Results were reproduced.  The verdict is:
    - complex PDF files (that is, containing cross-references, tables of contents, and bookmarks) generated by Acrobat 9.x Pro are roughly 2-5x larger than the identical file generated with Acrobat 8.x Pro.
    - different PDF conversion settings make a negligable difference (less than 10% rather than 70-80%).
    - using the "Reduce File Size" or "Optimize PDF" option cuts the file size roughly in half, almost always resulting in a "image downsampling mask" warning message, which requires acknowledgement (that is a problem for batch processing or automation).
    - adding an Acrobat watermark to the file cuts the file size roughly in half.
    - just using Save As to another filename has no effect on file size.
    - generating the PDF in Acrobat 9 with links but no PDF bookmarks still results in the inflated file size.
    - generating the PDF in Acrobat 9 without any links or bookmarks results in approximately the same file size as the Acrobat 8 PDF with full links and bookmarks.
    It appears that Acrobat 9's manner of adding links is what's bloating  the files, and in my case it's probably not related to images or image resolution/print quality.  It's a shame, because Acrobat 9 seems to have made some  improvements to the Review Tracker interface, and a few other bells and  whistles which I haven't really gotten around to exporing yet.  But  unless I find a way to keep my links and the PDF file sizes comparable to what I was  getting with Acrobat 8 Pro, it looks like I'm going to stay with Acrobat 8.

  • Pdf pages for fast open on the web

    Could I please receive suggestions on how to have CF Server created Pdf pages with .Jpg pictures open up fast of the internet?
    The system which we have created for this organization is great, everything works, but the Pdf pages open very slowlyyyyy.
    Suggestions are appreciated.

    Some iPhoto slide shows (those that use only the fade effect) do not fast start. They are made up of three video tracks slightly offset in time and a tween track that sets the fade.
    You could open them in QT Pro and use the save as menu. No re-compression but the file size will become three times larger because each of the video tracks will become independent (for lack of a better word). This new file will fast start.
    Exporting isn't a good choice unless you use identical settings to the original (Photo-JPEG video codec and an extremely low frame rate).
    The file size of the original is "trick" that can only be performed by iPhoto.

  • What's going on? When I type a title on my new Pages document, iwork is substituting a hyphen for the colon I want! Have never seen this one before. How do I correct this imposition? I have the 10.6.8 OS and Pages'09.

    What's going on? When I type the title of my new Pages document, iwork is substituting a hyphen for the colon I want. This is bizarre! How do I make my computer do my thing vs its thing? I have Pages '09.

    Colons are used by the operating system so can't be used in file names.

Maybe you are looking for

  • Memory error on startup

    I've had my mac for 2 years now and everything has been awsome. The other day I went to use itunes and it gave me the message "The Itunes application could not be opend. There is not enough memory available." I've tried reinstalling Itunes and the sa

  • What does ip fragment reassembly do

    hi can someone pls tell me what is the meaning of ip reassembly mode in the global configuration where it gives a option for operating system. i mean what does this option actually do. can someone pls guide me. regards sebastan

  • I have just updated my ipad mini with the new ios software and it has caused may ipads onboard keyboard to run very slowly does anyone no how to fix this issue

    I have just updated my ipad mini with the new ios software and it has caused may ipads onboard keyboard to run very slowly does anyone no how to fix this issue

  • Fonts in some websites wont render

    I got the interface fonts to render, and they seem to work fine, but some (a lot) of websites text wont render at all. The problem seems to be in the way it handles CSS, that if a font listed in font-family is not installed on the system, it just won

  • Where is the Map?

    I'm reading the news about how Apple is using OpenStreetMap instead of Google in iPhoto for iOS.  I have an iPhone 4 and an iPad 2 and can not find the map view I see people discussing.  In fact, I found somewhere that when you select [i] info for an