Other than the -36.....

I'm getting the following message; "A buffer overrun has been detected which has corrupted the programs internal state. The program cannot safely continue execution and must now be terminated." I hit "OK" and the entire QT program shuts down. Scripts? What do I do to fix it?

Try following this link and downloading and installing the BufferShield software. There's a 30-day Free Trial Version available.
http://www.sys-manage.com/english/products/products_BufferShield.html
It worked for me! The Quicktime issue doesn't appear, to me, to be a virus at all at this time! Seems to be more of a Windows issue than anything. So use the software, sit back, and enjoy your Quicktime software, without the hassle of that pesky buffer overrun message!
Dell   Windows XP Pro   Dell

Similar Messages

  • Running a java program in a directory other than the current directory

    How do I run a java program that's located in a directory other than the current directory?
    There is a file Test.java in /dir1/subdir1. If my current directory is anywhere other than that directory, say /dir2/subdir2, I can compile Test.java by using:
    javac -classpath /dir1/subdir1 /dir1/subdir1/Test.java
    But when I try to run it with:
    java -classpath /dir1/subdir1 /dir1/subdir1/Test
    I get a java.lang.NoClassDefFoundError: \dir1\subdir1\Test
    Any thoughts?

    You need to specify just the name of the class you want to run. So java -classpath /dir1/subdir1 Test

  • How do I assign a file to a drive other than the drive that contains my program software?

    I've just installed a video editing program on my new Mac Pro Xeon 64 bit workstation. I want to ensure that all my media files reside on a drive other than the drive that contains programs. I had no problem doing this on my old Dell. How do I do this on my Mac Pro? -- Gary

    Application Preferences.
    Next time, 'what' program would also help.
    Most people do setup with a dedicated boot drive with OS and apps, .then use other drives or array(s) for media, scratch as needed, including external hardware RAID.

  • How do i install reader to a drive other than the boot drive?

    how do i install reader to a drive other than the boot drive?

    Hi nicksdaddy,
    There is an offline version:
    http://get.adobe.com/reader/enterprise/
    Hope that helps!
    Stacy

  • Can I install Adobe Reader to a drive other than the C: drive?

    Can I install Adobe Reader to a drive other than the C: drive?

    Hello there,
    Welcome to Adobe Community. Yes it can be installed on a different drive. Though some of the files installed by it will still be installed on C: drive.
    When you run the installer, use 'Change destination folder' at the bottom of the panel
    If you already have Adobe Reader installed on the C: drive, you must uninstall it before installing a new version on a different location.
    Thanks!

  • When in mail, i would like to move emails to different folders other than the inbox, sent and trash can a folder be created?

    When in mail i would like to move my emails to a different folder on mail account other than the inbox, sent and trash options, can i  create a new folder?

    The suggestion above is for MailBoxes on the Mac in the mail app and have nothing at all to do with the iPad. I think that you are asking about the iPad mail app.
    You need to have an IMAP email account in order to create additional mailboxes on the iPad.
    If you go to your email account in the Mail app and look at the window where your inbox, trash folder and sent folder are - if there is an Edit button at the top of the window - tap that and then tap Add Mailbox at the bottom.
    If the Edit button is not there - you cannot create folders on the iPad. Your email account is not IMAP. Only IMAP email accounts can create folders on the iPad. Any folders that you would already have in an IMAP account would sync to the device as well.

  • How can I add vocal effects other than the 9 Voice options? (I can't shift pitch)

    Hello!
    I am making the switch from PC and am just trying to lower the pitch of a vocal track by at least an octave; I just got a MBP last week and am running GB 10.0.2. I can't find any info on similar problems that is helpful; most solutions I've come across show that when the track is selected, there should be a pitch shift bar with a sliding button, but I do not have that. I read a lot of people saying something about the track being purple or not, but I'm not sure if that's relative to the version I have or if that has anything to do with what's happening. When I select the track, in the little area toward the lower left when "Track" is selected, (what is that space called?) where the pitch shift option is for other people, I only have a sliding bar for Pitch Correction, and a checkbox for Limit to Key and Enable Flex. When "Region" is selected, it just shows the name of the region and there are no options. Another question I have is how to change the pitch of midi sounds? When the keyboard is open on the screen I have tried moving the little octave shifter, but it assigns the sounds that are on the keyboard at different locations if I move it, so it changes the sound completely. A couple of them shift one octave up or down, but there are no actual controls..
    I'm mostly just dabbling with EDM/trap/Hiphop tracks at the moment, but am confused about whether or not there are other vocal effects and controls other than the preset Voice options in the instrument area (Bright vocal, Classic vocal, compressed vocal, Edge vocal, etc.)? I'm not going to be using GB forever, but are there not any other options like for current rap/trap production (phaser, balance, EQ, auto tune, choppers, actual voice altering effects, etc.) [preferably without buying extra things]? And not only vocals, but editing effects for all sounds.. If so, how do I get to them? And if not I know I should at least be able to lower or raise the pitch of a vocal recording... There are some pretty legit electronic instruments that are exactly the kind of sound I'm going for so I was surprised to not see an equally simple to access vocal effects board or something. Any additional tips for a n00b electronic music producer would also be greatly appreciated! Thank you for any help!

    In GarageBand 10 you can no longer change a track with an audio file to a "purple" audio recording, as it has been possible in GarageBand '11.
    Even, if you can make the transpose slider visible by enlarging the the track editor panel, the slider will be disabled.
    What you can do however, is either add an AuPItch filter  from the audioUnit panel or to convert your audio file to loop and to admit from the Loop Browser.
    In the new GarageBand you add the AuPitch filter from the Smart Controls.
    Enlarge the SmartControl panel by dragging the dividing line upwards, until you see the Audio Units brick, then add an Apple Audio Unit and set it to AuPitch.
    Or create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library". You need to trim the filet an exact number of measures.
    Set the current key and tempo, name the loop, and save the loop. Make sure, that one-shot loop is not enabled.
    Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
    You will be able to transpose the sample  like any regular loop.

  • TS3297 iTunes puts up a message "The item you've requested is not currently available in the Hong Kong Store." I had not requested anything from the HK store at that point, and I have never used any store other than the HK one. How I can clear that messag

    I've been running iTunes on WinXP for years with few problems.  I have all my iTunes files on an external USB drive. I just bought a new PC running Win7, 64-bit.
    I connected the external USB drive to the new PC and installed 64-bit iTunes on it. When iTunes started up, I pointed it at the iTunes directory in the external drive, using Edit > Preferences > Advanced > iTunes Media Folder Location. It showed a progress bar that it was updating the iTunes Library. I signed in and authorized the new machine. I have one spare authorization.
    Then iTunes put up a message "The item you've requested is not currently available in the Hong Kong Store." I had not requested anything from the HK store at that point, and I have never used any store other than the HK one.
    When I click OK, the iTunes Store page remains blank, apart from saying "iTunes Store" in the middle of the page.
    I went to "View My Account" and pressed the Reset button to "Reset all warnings for buying and downloading items", but that doesn’t fix this particular warning. I also tried Edit > Preferences > Advanced > Reset Warnings and Rest Cache.
    But still, every time I click the “App Store” button in the iTunes Store window, the message appears. If I click the Books, Podcasts or iTunesU buttons, these display normally.  So I’m stuck with being unable to purchase apps, other than through my iPad and iPhone.
    If I move the external drive back to the XP machine, the same thing happens.  If I go to another PC - a notebook running Vista - everything is normal.
    Any idea how I can clear that message?
    Thanks for any help you can offer.

    Further info on my question above.
    I have tried re-validating my credit card, which apparently fixed it for some. 
    I have also tried uninstalling, re-downloading and installing again.
    Neither of these steps fixed the problem.

  • HT201079 Under iCloud family sharing for iTunes is a family member other than the organizer able to make purchases

    Under iCloud family sharing for iTunes is a family member other than the organizer able to make purchases?

    Any member of the family group can make purchases, but they are all charged to the organizer's credit card.  For children (under 13) you can also enable Ask to Buy, and their purchases will require your approval (see Family Sharing and Apple IDs for kids).

  • Can I use a different charger for my iPhone other than the one that was supplied for it

    Can I use a different wall charger for my iPhone 4S other than the one that was supplied with it

    wjosten wrote:
    Lawrence Finch wrote:
    Apple puts no special requirements on it other than that it meet the USB spec.
    Except for the connector...
    What is special about the connector for the 4s charger cable? Mine is a normal USB connector. The question was about the wall charger, not the connector to the phone.

  • How do I get an iPod touch to turn on other than the normal way. It has been dropped and all I can get is a blank screen. Have tried holding the HOME button down for 30 sec. but that didn't work.

    How does one get an iPod nano to turn on other than the "normal" way? This one has been dropped and all I can get is a blank screen. I have tried holding down the HOME button to restart it but no go. When I connect it to my computer, I am told to enter the PASSCODE which I cannot do as there is no touchpad.

    David ..
    Your topic refers to an iPod touch
    Then you say:  How does one get an iPod nano to turn on ......
    If it's an iPod touch, try a reset.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, whether it's an iPod nano or touch, it probably needs service >  Apple - Support - Service Answer Center

  • How to enable remote debugging for a session other than the current one

    Hi all,
    I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
    More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
    The docs indicate that I should be able to do so:
    dbms_debug_jdwp.connect_tcp(
    host IN VARCHAR2,
    port IN VARCHAR2,
    session_id IN PLS_INTEGER := NULL,
    session_serial IN PLS_INTEGER := NULL,
    debug_role IN VARCHAR2 := NULL,
    debug_role_pwd IN VARCHAR2 := NULL,
    option_flags IN PLS_INTEGER := 0,
    extensions_cmd_set IN PLS_INTEGER := 128);
    But when I try (even as sys), I get the following:
    exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
    ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
    ORA-06512: at line 1
    00022. 00000 - "invalid session ID; access denied"
    *Cause:    Either the session specified does not exist or the caller
    does not have the privilege to access it.
    *Action:   Specify a valid session ID that you have privilege to access,
    that is either you own it or you have the CHANGE_USER privilege.
    I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
    Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?

    Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
    I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
    Regards,
    K.

  • 10.6.2 won't install to another volume other than the boot volume

    Report a possible bug to Apple.
    as is often recommended for updates, I install from another volume other than the one I want to update, and never update the volume I am booted from. The 10.6.2 update (both combo and update only) won't update any other volume other than the one booted from. Previous updates of OS X have always been able to do this. When I try to change installation location to another volume (which contain 10.6.1) it posts an error saying "This update requires 10.6.2 to be installed", which is wrong it two ways. First, how can an upgrade require itself to be installed before it will actually install. Second, there is no reason it shouldn't have been able to update the 10.6.1 volume. I had two 10.6.1 volumes, when booting from either one, it wouldn't update the other. The update will install if it's run on the volume I boot from, but that defeats the purpose of trying to eliminate update issues by installing from another volume.

    -update-
    In order to to update remotely, there seems to be a number of new and interesting restrictions
    imposed. I came to these basic conclusions by experimentation:
    1. I was unable to install a 10.6.2 update to a remote 10.6.0/10.6.1 volume, while booted from
    a 10.6.0/10.6.1 volume. In other words I had to be booted from a 10.6.2 volume to be able to
    remotely install (or reinstall) a 10.6.2 update to a remote 10.6.0/1/2 volume.
    2. If the volume I was installing to was another internal volume, then I usually (but not
    always) had to set the volume I was trying to install to, as the default startup volume in system
    preferences before the installer would accept it as a valid volume to update.
    3. If the volume I was installing to was a firewire or USB drive, then the #2 restriction did not apply,
    but the the #1 restriction still applied (I still had to be booted from a 10.6.2 volume to install
    a 10.6.2 update).
    4. If, after following the above rules, you are still having trouble, simply rebooting and trying
    again will usually work.
    So in conclusion:
    Remotely updating an external firewire or USB drive was relatively simple and easy, just boot
    from an internal 10.6.2 installation and do it.
    Remotely updating another internal drive though, can be quite annoying.
    Apple, it seems, is heavily promoting the automatic update method.
    Lately, it seems, it is getting more and more difficult in many cases, to get a major
    OS update to "take" properly. I have been heavily using the "bare bones admin account"
    method (outlined in my previous post) for the last several months with good success.
    I agree with you that the remote method should be the best, but Apple's install packages
    have become increasingly difficult to install using that method, even in 10.5.x.
    I will say this though, the updates I installed today using the remote method
    are working just fine, even though I had to wrestle with them to get them installed.
    Kj ♘

  • Configuring a Communication Channel for an AE other than the default IS

    Configuring a Communication Channel for an Adapter Engine other than the default engine.
    See:  help.sap.com for Communication Channel http://help.sap.com/saphelp_nw04/helpdata/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm
    It states under 'Adapter Configuration', that you can specify the Adapter Engine you want to use in the Adapter Engine dropdown box.
    I have activated the XI components on my ERP system using transaction SICF, but what do I have to do to make the other adapter engines show up in the dropdown list when configuring an adapter?
    Maybe some background would be helpful:  This is for a scenario that will send a file from an external system to one of the ERP systems in our landscape.  BUT, the system admins have decided to revoke our FTP accounts (because they have their reasons), so I need to create a File Adapter that will drop the file on the file system of that ERP system, due to visibility I want to use the integrated Adapter Engine that comes with the ERP system, but need to know how/what I'm missing in setting up this scenario.

    Hi Anesh,
    >>>>but what do I have to do to make the other adapter engines show up in the dropdown list when configuring an adapter?
    in order to use some other adapter engine you
    have to install it first by dafault only one
    (central) adapter engine is used and it is all
    most clients need
    if you'd like to use some other adapter engine
    (decentralized for example) have a look at thid guide:
    <b>Configuring a Local Adapter Engine to Work with a Central Instance</b>
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

  • How to maintain itunes on a drive other than the system drive

    I would like to have itunes on a drive other than the Windows 7 operating system drive, and have it stay there.
    Never mind...I found a post which applies.

    Hi Maciejhttp://forums.adobe.com/people/Maciej%20Przepi%C3%B3ra
    Thanks for your inputs.
    I have memory leaks in my code. I have tried iDialog->Release() code which reduces some of the memory leaks
    Though I want to use more clean method of InterfacePtr.
    "To prevent reference counts  from incrementing, as in Type 1a and 1b, use this constructor, which does not  call IPMUnknown::AddRef:"
    Which Constructor you are pointing out, I didn't get it.
    I tried InterfacePtr<IDialog> iDialog((IDialog *)iWidgetParent->QueryParentFor(IID_IDIALOG));
    It started giving me assert again.
    Please give an example how to do it or which InterfacePtr constructor doesn't call AddRef().
    Many thanks for helping me with this.
    D

  • When I create a stickie note, I can not save any font size other than the default.  How do I save a stickie with a larger or different font?

    How do I save a stickie note with a different font size other than the default?  When I create a note and save it using a larger font, it reopens with the default.

    Unlikely, I'm afraid.
    The LMS has no control over the playbar that pauses or plays the Captivate content.
    In a Multi SCORM package, the LMS also may be showing a TOC in the SCORM player with links to launch the lesson modules.  This TOC is in addition to the TOC inside the Captivate project file which gives access to sections of the module by jumping to slides that begin those sections.  But the LMS doesn't usually give you any control over the look and feel or functionality of that TOC either. 
    If your client is adamant that they want complete control over these areas, then your best option may be NOT to build this course with Captivate but build it from the ground up with another tool.  E.g. Flash, or Dreamweaver.  Either way, that will add a lot more time and expense to the project.  But if the client has the budget and is unwilling to budge on their requirement, then that's what I would be telling them to do.

Maybe you are looking for